+/**
+ * \brief Reads from disk the Pixel Data of JPEG Dicom encapsulated
+ & file and decompress it.
+ * @param fp File Pointer
+ * @return Boolean
+ */
+bool PixelConvert::ReadAndDecompressJPEGFile( std::ifstream* fp )
+{
+ uint8_t* localDecompressed = Decompressed;
+ // Loop on the fragment[s]
+ for( JPEGFragmentsInfo::JPEGFragmentsList::iterator
+ it = JPEGInfo->Fragments.begin();
+ it != JPEGInfo->Fragments.end();
+ ++it )
+ {
+ fp->seekg( (*it)->Offset, std::ios_base::beg);
+
+ if ( IsJPEG2000 )
+ {
+ if ( ! gdcm_read_JPEG2000_file( fp,localDecompressed ) )
+ {
+ return false;
+ }
+ }
+ else if ( BitsStored == 8)
+ {
+ // JPEG Lossy : call to IJG 6b
+ if ( ! gdcm_read_JPEG_file8( fp, localDecompressed ) )
+ {
+ return false;
+ }
+ }
+ else if ( BitsStored == 12)
+ {
+ // Reading Fragment pixels
+ if ( ! gdcm_read_JPEG_file12 ( fp, localDecompressed ) )
+ {
+ return false;
+ }
+ }
+ else if ( BitsStored == 16)
+ {
+ // Reading Fragment pixels
+ if ( ! gdcm_read_JPEG_file16 ( fp, localDecompressed ) )
+ {
+ return false;
+ }
+ //assert( IsJPEGLossless );
+ }
+ else
+ {
+ // other JPEG lossy not supported
+ dbg.Error("PixelConvert::ReadAndDecompressJPEGFile: unknown "
+ "jpeg lossy compression ");
+ return false;
+ }
+
+ // Advance to next free location in Decompressed
+ // for next fragment decompression (if any)
+ int length = XSize * YSize * SamplesPerPixel;
+ int numberBytes = BitsAllocated / 8;
+
+ localDecompressed += length * numberBytes;
+ }
+ return true;
+}
+
+/**
+ * \brief Re-arrange the bits within the bytes.
+ * @return Boolean
+ */
+bool PixelConvert::ConvertReArrangeBits() throw ( FormatError )
+{
+ if ( BitsStored != BitsAllocated )
+ {
+ int l = (int)( DecompressedSize / ( BitsAllocated / 8 ) );
+ if ( BitsAllocated == 16 )
+ {
+ uint16_t mask = 0xffff;
+ mask = mask >> ( BitsAllocated - BitsStored );
+ uint16_t* deb = (uint16_t*)Decompressed;
+ for(int i = 0; i<l; i++)
+ {
+ *deb = (*deb >> (BitsStored - HighBitPosition - 1)) & mask;
+ deb++;
+ }
+ }
+ else if ( BitsAllocated == 32 )
+ {
+ uint32_t mask = 0xffffffff;
+ mask = mask >> ( BitsAllocated - BitsStored );
+ uint32_t* deb = (uint32_t*)Decompressed;
+ for(int i = 0; i<l; i++)
+ {
+ *deb = (*deb >> (BitsStored - HighBitPosition - 1)) & mask;
+ deb++;
+ }
+ }
+ else
+ {
+ dbg.Verbose(0, "PixelConvert::ConvertReArrangeBits: weird image");
+ throw FormatError( "PixelConvert::ConvertReArrangeBits()",
+ "weird image !?" );
+ }
+ }
+ return true;
+}
+
+/**
+ * \brief Convert (Y plane, cB plane, cR plane) to RGB pixels
+ * \warning Works on all the frames at a time
+ */
+void PixelConvert::ConvertYcBcRPlanesToRGBPixels()
+{
+ uint8_t* localDecompressed = Decompressed;
+ uint8_t* copyDecompressed = new uint8_t[ DecompressedSize ];
+ memmove( copyDecompressed, localDecompressed, DecompressedSize );
+
+ // to see the tricks about YBR_FULL, YBR_FULL_422,
+ // YBR_PARTIAL_422, YBR_ICT, YBR_RCT have a look at :
+ // ftp://medical.nema.org/medical/dicom/final/sup61_ft.pdf
+ // and be *very* affraid
+ //
+ int l = XSize * YSize;
+ int nbFrames = ZSize;
+
+ uint8_t* a = copyDecompressed;
+ uint8_t* b = copyDecompressed + l;
+ uint8_t* c = copyDecompressed + l + l;
+ double R, G, B;
+
+ /// \todo : Replace by the 'well known' integer computation
+ /// counterpart. Refer to
+ /// http://lestourtereaux.free.fr/papers/data/yuvrgb.pdf
+ /// for code optimisation.
+
+ for ( int i = 0; i < nbFrames; i++ )
+ {
+ for ( int j = 0; j < l; j++ )
+ {
+ R = 1.164 *(*a-16) + 1.596 *(*c -128) + 0.5;
+ G = 1.164 *(*a-16) - 0.813 *(*c -128) - 0.392 *(*b -128) + 0.5;
+ B = 1.164 *(*a-16) + 2.017 *(*b -128) + 0.5;
+
+ if (R < 0.0) R = 0.0;
+ if (G < 0.0) G = 0.0;
+ if (B < 0.0) B = 0.0;
+ if (R > 255.0) R = 255.0;
+ if (G > 255.0) G = 255.0;
+ if (B > 255.0) B = 255.0;
+
+ *(localDecompressed++) = (uint8_t)R;
+ *(localDecompressed++) = (uint8_t)G;
+ *(localDecompressed++) = (uint8_t)B;
+ a++;
+ b++;
+ c++;
+ }
+ }
+ delete[] copyDecompressed;
+}
+
+/**
+ * \brief Convert (Red plane, Green plane, Blue plane) to RGB pixels
+ * \warning Works on all the frames at a time
+ */
+void PixelConvert::ConvertRGBPlanesToRGBPixels()
+{
+ uint8_t* localDecompressed = Decompressed;
+ uint8_t* copyDecompressed = new uint8_t[ DecompressedSize ];
+ memmove( copyDecompressed, localDecompressed, DecompressedSize );
+
+ int l = XSize * YSize * ZSize;
+
+ uint8_t* a = copyDecompressed;
+ uint8_t* b = copyDecompressed + l;
+ uint8_t* c = copyDecompressed + l + l;
+
+ for (int j = 0; j < l; j++)
+ {
+ *(localDecompressed++) = *(a++);
+ *(localDecompressed++) = *(b++);
+ *(localDecompressed++) = *(c++);
+ }
+ delete[] copyDecompressed;
+}
+
+bool PixelConvert::ReadAndDecompressPixelData( std::ifstream* fp )
+{
+ ComputeDecompressedAndRGBSizes();
+ AllocateDecompressed();
+ //////////////////////////////////////////////////
+ //// First stage: get our hands on the Pixel Data.
+ if ( !fp )
+ {
+ dbg.Verbose( 0, "PixelConvert::ReadAndDecompressPixelData: "
+ "unavailable file pointer." );
+ return false;
+ }
+
+ fp->seekg( PixelOffset, std::ios_base::beg );
+ if( fp->fail() || fp->eof()) //Fp->gcount() == 1
+ {
+ dbg.Verbose( 0, "PixelConvert::ReadAndDecompressPixelData: "
+ "unable to find PixelOffset in file." );
+ return false;
+ }
+
+ //////////////////////////////////////////////////
+ //// Second stage: read from disk dans decompress.
+ if ( BitsAllocated == 12 )
+ {
+ ReadAndDecompress12BitsTo16Bits( fp);
+ }
+ else if ( IsDecompressed )
+ {
+ fp->read( (char*)Decompressed, PixelDataLength);
+ if ( fp->fail() || fp->eof())//Fp->gcount() == 1
+ {
+ dbg.Verbose( 0, "PixelConvert::ReadAndDecompressPixelData: "
+ "reading of decompressed pixel data failed." );
+ return false;
+ }
+ }
+ else if ( IsRLELossless )
+ {
+ if ( ! ReadAndDecompressRLEFile( fp ) )
+ {
+ dbg.Verbose( 0, "PixelConvert::ReadAndDecompressPixelData: "
+ "RLE decompressor failed." );
+ return false;
+ }
+ }
+ else
+ {
+ // Default case concerns JPEG family
+ if ( ! ReadAndDecompressJPEGFile( fp ) )
+ {
+ dbg.Verbose( 0, "PixelConvert::ReadAndDecompressPixelData: "
+ "JPEG decompressor failed." );
+ return false;
+ }
+ }
+
+ ////////////////////////////////////////////
+ //// Third stage: twigle the bytes and bits.
+ ConvertReorderEndianity();
+ ConvertReArrangeBits();
+ ConvertHandleColor();
+
+ return true;
+}
+
+void PixelConvert::ConvertHandleColor()
+{
+ //////////////////////////////////
+ // Deal with the color decoding i.e. handle:
+ // - R, G, B planes (as opposed to RGB pixels)
+ // - YBR (various) encodings.
+ // - LUT[s] (or "PALETTE COLOR").
+ //
+ // The classification in the color decoding schema is based on the blending
+ // of two Dicom tags values:
+ // * "Photometric Interpretation" for which we have the cases:
+ // - [Photo A] MONOCHROME[1|2] pictures,
+ // - [Photo B] RGB or YBR_FULL_422 (which acts as RGB),
+ // - [Photo C] YBR_* (with the above exception of YBR_FULL_422)
+ // - [Photo D] "PALETTE COLOR" which indicates the presence of LUT[s].
+ // * "Planar Configuration" for which we have the cases:
+ // - [Planar 0] 0 then Pixels are already RGB
+ // - [Planar 1] 1 then we have 3 planes : R, G, B,
+ // - [Planar 2] 2 then we have 1 gray Plane and 3 LUTs
+ //
+ // Now in theory, one could expect some coherence when blending the above
+ // cases. For example we should not encounter files belonging at the
+ // time to case [Planar 0] and case [Photo D].
+ // Alas, this was only theory ! Because in practice some odd (read ill
+ // formated Dicom) files (e.g. gdcmData/US-PAL-8-10x-echo.dcm) we encounter:
+ // - "Planar Configuration" = 0,
+ // - "Photometric Interpretation" = "PALETTE COLOR".
+ // Hence gdcm shall use the folowing "heuristic" in order to be tolerant
+ // towards Dicom-non-conformance files:
+ // << whatever the "Planar Configuration" value might be, a
+ // "Photometric Interpretation" set to "PALETTE COLOR" forces
+ // a LUT intervention >>
+ //
+ // Now we are left with the following handling of the cases:
+ // - [Planar 0] OR [Photo A] no color decoding (since respectively
+ // Pixels are already RGB and monochrome pictures have no color :),
+ // - [Planar 1] AND [Photo B] handled with ConvertRGBPlanesToRGBPixels()
+ // - [Planar 1] AND [Photo C] handled with ConvertYcBcRPlanesToRGBPixels()
+ // - [Planar 2] OR [Photo D] requires LUT intervention.
+
+ if ( ! IsDecompressedRGB() )
+ {
+ // [Planar 2] OR [Photo D]: LUT intervention done outside
+ return;
+ }
+
+ if ( PlanarConfiguration == 1 )
+ {
+ if ( IsYBRFull )
+ {
+ // [Planar 1] AND [Photo C] (remember YBR_FULL_422 acts as RGB)
+ ConvertYcBcRPlanesToRGBPixels();
+ }
+ else
+ {
+ // [Planar 1] AND [Photo C]
+ ConvertRGBPlanesToRGBPixels();
+ }
+ return;
+ }
+
+ // When planarConf is 0, and RLELossless (forbidden by Dicom norm)
+ // pixels need to be RGB-fied anyway
+ if (IsRLELossless)
+ {
+ ConvertRGBPlanesToRGBPixels();
+ }
+ // In *normal *case, when planarConf is 0, pixels are already in RGB
+}
+
+/**
+ * \brief Predicate to know wether the image[s] (once decompressed) is RGB.
+ * \note See comments of \ref ConvertHandleColor
+ */
+bool PixelConvert::IsDecompressedRGB()
+{
+ if ( IsMonochrome
+ || PlanarConfiguration == 2
+ || IsPaletteColor )
+ {
+ return false;
+ }
+ return true;
+}
+
+void PixelConvert::ComputeDecompressedAndRGBSizes()
+{
+ int bitsAllocated = BitsAllocated;
+ // Number of "Bits Allocated" is fixed to 16 when it's 12, since
+ // in this case we will expand the image to 16 bits (see
+ // \ref ReadAndDecompress12BitsTo16Bits() )
+ if ( BitsAllocated == 12 )
+ {
+ bitsAllocated = 16;
+ }
+
+ DecompressedSize = XSize * YSize * ZSize
+ * ( bitsAllocated / 8 )
+ * SamplesPerPixel;
+ if ( HasLUT )
+ {
+ RGBSize = 3 * DecompressedSize;
+ }
+
+}
+
+void PixelConvert::GrabInformationsFromHeader( Header* header )
+{
+ // Just in case some access to a Header element requires disk access.
+ // Note: gdcmDocument::Fp is leaved open after OpenFile.
+ std::ifstream* fp = header->OpenFile();
+ // Number of Bits Allocated for storing a Pixel is defaulted to 16
+ // when absent from the header.
+ BitsAllocated = header->GetBitsAllocated();
+ if ( BitsAllocated == 0 )
+ {
+ BitsAllocated = 16;
+ }
+
+ // Number of "Bits Stored" defaulted to number of "Bits Allocated"
+ // when absent from the header.
+ BitsStored = header->GetBitsStored();
+ if ( BitsStored == 0 )
+ {
+ BitsStored = BitsAllocated;
+ }
+
+ // High Bit Position
+ HighBitPosition = header->GetHighBitPosition();
+ if ( HighBitPosition == 0 )
+ {
+ HighBitPosition = BitsAllocated - 1;
+ }
+
+ XSize = header->GetXSize();
+ YSize = header->GetYSize();
+ ZSize = header->GetZSize();
+ SamplesPerPixel = header->GetSamplesPerPixel();
+ PixelSize = header->GetPixelSize();
+ PixelSign = header->IsSignedPixelData();
+ SwapCode = header->GetSwapCode();
+ TransferSyntaxType ts = header->GetTransferSyntax();
+ IsDecompressed =
+ ( ! header->IsDicomV3() )
+ || ts == ImplicitVRLittleEndian
+ || ts == ExplicitVRLittleEndian
+ || ts == ExplicitVRBigEndian
+ || ts == DeflatedExplicitVRLittleEndian;
+ IsJPEG2000 = header->IsJPEG2000();
+ IsJPEGLossless = header->IsJPEGLossless();
+ IsRLELossless = ( ts == RLELossless );
+ PixelOffset = header->GetPixelOffset();
+ PixelDataLength = header->GetPixelAreaLength();
+ RLEInfo = header->GetRLEInfo();
+ JPEGInfo = header->GetJPEGInfo();
+
+ PlanarConfiguration = header->GetPlanarConfiguration();
+ IsMonochrome = header->IsMonochrome();
+ IsPaletteColor = header->IsPaletteColor();
+ IsYBRFull = header->IsYBRFull();
+
+ /////////////////////////////////////////////////////////////////
+ // LUT section:
+ HasLUT = header->HasLUT();
+ if ( HasLUT )
+ {
+ LutRedDescriptor = header->GetEntryByNumber( 0x0028, 0x1101 );
+ LutGreenDescriptor = header->GetEntryByNumber( 0x0028, 0x1102 );
+ LutBlueDescriptor = header->GetEntryByNumber( 0x0028, 0x1103 );
+
+ // Depending on the value of Document::MAX_SIZE_LOAD_ELEMENT_VALUE
+ // [ refer to invocation of Document::SetMaxSizeLoadEntry() in
+ // Document::Document() ], the loading of the value (content) of a
+ // [Bin|Val]Entry occurence migth have been hindered (read simply NOT
+ // loaded). Hence, we first try to obtain the LUTs data from the header
+ // and when this fails we read the LUTs data directely from disk.
+ /// \todo Reading a [Bin|Val]Entry directly from disk is a kludge.
+ /// We should NOT bypass the [Bin|Val]Entry class. Instead
+ /// an access to an UNLOADED content of a [Bin|Val]Entry occurence
+ /// (e.g. BinEntry::GetBinArea()) should force disk access from
+ /// within the [Bin|Val]Entry class itself. The only problem
+ /// is that the [Bin|Val]Entry is unaware of the FILE* is was
+ /// parsed from. Fix that. FIXME.
+
+ ////// Red round:
+ LutRedData = (uint8_t*)header->GetEntryBinAreaByNumber( 0x0028, 0x1201 );
+ if ( ! LutRedData )
+ {
+ // Read the Lut Data from disk
+ DocEntry* lutRedDataEntry = header->GetDocEntryByNumber( 0x0028,
+ 0x1201 );
+ LutRedData = new uint8_t[ lutRedDataEntry->GetLength() ];
+ fp->seekg( lutRedDataEntry->GetOffset() ,std::ios_base::beg );
+ fp->read( (char*)LutRedData, (size_t)lutRedDataEntry->GetLength());
+ if ( fp->fail() || fp->eof())//Fp->gcount() == 1
+ {
+ dbg.Verbose(0, "PixelConvert::GrabInformationsFromHeader: "
+ "unable to read red LUT data" );
+ return;
+ }
+ }
+
+ ////// Green round:
+ LutGreenData = (uint8_t*)header->GetEntryBinAreaByNumber(0x0028, 0x1202 );
+ if ( ! LutGreenData)
+ {
+ // Read the Lut Data from disk
+ DocEntry* lutGreenDataEntry = header->GetDocEntryByNumber( 0x0028,
+ 0x1202 );
+ LutGreenData = new uint8_t[ lutGreenDataEntry->GetLength() ];
+ fp->seekg( lutGreenDataEntry->GetOffset() , std::ios_base::beg );
+ fp->read( (char*)LutGreenData, (size_t)lutGreenDataEntry->GetLength() );
+ if ( fp->fail() || fp->eof())//Fp->gcount() == 1
+ {
+ dbg.Verbose(0, "PixelConvert::GrabInformationsFromHeader: "
+ "unable to read green LUT data" );
+ return;
+ }
+ }
+
+ ////// Blue round:
+ LutBlueData = (uint8_t*)header->GetEntryBinAreaByNumber( 0x0028, 0x1203 );
+ if ( ! LutBlueData )
+ {
+ // Read the Lut Data from disk
+ DocEntry* lutBlueDataEntry = header->GetDocEntryByNumber( 0x0028,
+ 0x1203 );
+ LutBlueData = new uint8_t[ lutBlueDataEntry->GetLength() ];
+ fp->seekg( lutBlueDataEntry->GetOffset() , std::ios_base::beg );
+ fp->read( (char*)LutBlueData, (size_t)lutBlueDataEntry->GetLength() );
+ if ( fp->fail() || fp->eof())//Fp->gcount() == 1
+ {
+ dbg.Verbose(0, "PixelConvert::GrabInformationsFromHeader: "
+ "unable to read blue LUT data" );
+ return;
+ }
+ }
+ }
+
+ header->CloseFile();
+}
+
+/**
+ * \brief Build Red/Green/Blue/Alpha LUT from Header
+ * when (0028,0004),Photometric Interpretation = [PALETTE COLOR ]
+ * and (0028,1101),(0028,1102),(0028,1102)
+ * - xxx Palette Color Lookup Table Descriptor - are found
+ * and (0028,1201),(0028,1202),(0028,1202)
+ * - xxx Palette Color Lookup Table Data - are found
+ * \warning does NOT deal with :
+ * 0028 1100 Gray Lookup Table Descriptor (Retired)
+ * 0028 1221 Segmented Red Palette Color Lookup Table Data
+ * 0028 1222 Segmented Green Palette Color Lookup Table Data
+ * 0028 1223 Segmented Blue Palette Color Lookup Table Data
+ * no known Dicom reader deals with them :-(
+ * @return a RGBA Lookup Table
+ */
+void PixelConvert::BuildLUTRGBA()
+{
+ if ( LutRGBA )
+ {
+ return;
+ }
+ // Not so easy : see
+ // http://www.barre.nom.fr/medical/dicom2/limitations.html#Color%20Lookup%20Tables
+
+ if ( ! IsPaletteColor )
+ {
+ return;
+ }
+
+ if ( LutRedDescriptor == GDCM_UNFOUND
+ || LutGreenDescriptor == GDCM_UNFOUND
+ || LutBlueDescriptor == GDCM_UNFOUND )
+ {
+ return;
+ }
+
+ ////////////////////////////////////////////
+ // Extract the info from the LUT descriptors
+ int lengthR; // Red LUT length in Bytes
+ int debR; // Subscript of the first Lut Value
+ int nbitsR; // Lut item size (in Bits)
+ int nbRead = sscanf( LutRedDescriptor.c_str(),
+ "%d\\%d\\%d",
+ &lengthR, &debR, &nbitsR );
+ if( nbRead != 3 )
+ {
+ dbg.Verbose(0, "PixelConvert::BuildLUTRGBA: wrong red LUT descriptor");
+ }
+
+ int lengthG; // Green LUT length in Bytes
+ int debG; // Subscript of the first Lut Value
+ int nbitsG; // Lut item size (in Bits)
+ nbRead = sscanf( LutGreenDescriptor.c_str(),
+ "%d\\%d\\%d",
+ &lengthG, &debG, &nbitsG );
+ if( nbRead != 3 )
+ {
+ dbg.Verbose(0, "PixelConvert::BuildLUTRGBA: wrong green LUT descriptor");
+ }
+
+ int lengthB; // Blue LUT length in Bytes
+ int debB; // Subscript of the first Lut Value
+ int nbitsB; // Lut item size (in Bits)
+ nbRead = sscanf( LutRedDescriptor.c_str(),
+ "%d\\%d\\%d",
+ &lengthB, &debB, &nbitsB );
+ if( nbRead != 3 )
+ {
+ dbg.Verbose(0, "PixelConvert::BuildLUTRGBA: wrong blue LUT descriptor");
+ }
+
+ ////////////////////////////////////////////////////////
+ if ( ( ! LutRedData ) || ( ! LutGreenData ) || ( ! LutBlueData ) )
+ {
+ return;
+ }
+
+ ////////////////////////////////////////////////
+ // forge the 4 * 8 Bits Red/Green/Blue/Alpha LUT
+ LutRGBA = new uint8_t[ 1024 ]; // 256 * 4 (R, G, B, Alpha)
+ if ( !LutRGBA )
+ {
+ return;
+ }
+ memset( LutRGBA, 0, 1024 );
+
+ int mult;
+ if ( ( nbitsR == 16 ) && ( BitsAllocated == 8 ) )
+ {
+ // when LUT item size is different than pixel size
+ mult = 2; // high byte must be = low byte
+ }
+ else
+ {
+ // See PS 3.3-2003 C.11.1.1.2 p 619
+ mult = 1;
+ }
+
+ // if we get a black image, let's just remove the '+1'
+ // from 'i*mult+1' and check again
+ // if it works, we shall have to check the 3 Palettes
+ // to see which byte is ==0 (first one, or second one)
+ // and fix the code
+ // We give up the checking to avoid some (useless ?)overhead
+ // (optimistic asumption)
+ int i;
+ uint8_t* a = LutRGBA + 0;
+ for( i=0; i < lengthR; ++i )
+ {
+ *a = LutRedData[i*mult+1];
+ a += 4;
+ }
+
+ a = LutRGBA + 1;
+ for( i=0; i < lengthG; ++i)
+ {
+ *a = LutGreenData[i*mult+1];
+ a += 4;
+ }
+
+ a = LutRGBA + 2;
+ for(i=0; i < lengthB; ++i)
+ {
+ *a = LutBlueData[i*mult+1];
+ a += 4;
+ }
+
+ a = LutRGBA + 3;
+ for(i=0; i < 256; ++i)
+ {
+ *a = 1; // Alpha component
+ a += 4;
+ }
+}
+
+/**
+ * \brief Build the RGB image from the Decompressed imagage and the LUTs.
+ */
+bool PixelConvert::BuildRGBImage()
+{
+ if ( RGB )
+ {
+ // The job is already done.
+ return true;
+ }
+
+ if ( ! Decompressed )
+ {
+ // The job can't be done
+ return false;
+ }
+
+ BuildLUTRGBA();
+ if ( ! LutRGBA )
+ {
+ // The job can't be done
+ return false;
+ }
+
+ // Build RGB Pixels
+ AllocateRGB();
+ uint8_t* localRGB = RGB;
+ for (size_t i = 0; i < DecompressedSize; ++i )
+ {
+ int j = Decompressed[i] * 4;
+ *localRGB++ = LutRGBA[j];
+ *localRGB++ = LutRGBA[j+1];
+ *localRGB++ = LutRGBA[j+2];
+ }
+ return true;
+}
+
+/**
+ * \brief Print self.
+ * @param indent Indentation string to be prepended during printing.
+ * @param os Stream to print to.
+ */
+void PixelConvert::Print( std::string indent, std::ostream &os )
+{
+ os << indent
+ << "--- Pixel information -------------------------"
+ << std::endl;
+ os << indent
+ << "Pixel Data: offset " << PixelOffset
+ << " x" << std::hex << PixelOffset << std::dec
+ << " length " << PixelDataLength
+ << " x" << std::hex << PixelDataLength << std::dec
+ << std::endl;
+
+ if ( IsRLELossless )
+ {
+ if ( RLEInfo )
+ {
+ RLEInfo->Print( indent, os );
+ }
+ else
+ {
+ dbg.Verbose(0, "PixelConvert::Print: set as RLE file "
+ "but NO RLEinfo present.");
+ }
+ }
+
+ if ( IsJPEG2000 || IsJPEGLossless )
+ {
+ if ( JPEGInfo )
+ {
+ JPEGInfo->Print( indent, os );
+ }
+ else
+ {
+ dbg.Verbose(0, "PixelConvert::Print: set as JPEG file "
+ "but NO JPEGinfo present.");
+ }
+ }
+}
+
+} // end namespace gdcm
+
+// NOTES on File internal calls
+// User
+// ---> GetImageData
+// ---> GetImageDataIntoVector
+// |---> GetImageDataIntoVectorRaw
+// | lut intervention
+// User
+// ---> GetImageDataRaw
+// ---> GetImageDataIntoVectorRaw