+2005-05-22 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
+ * Adding potential support for mpeg and jpeg2000 through two new lin
+ - JasPer for JPEG2000
+ - libmpeg2 from the MPEG consortium
+ Also adding intial work to use this lib.
+
+2005-04-26 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Testing/TestAllReadCompareDicom.cxx : update the test printed results and
+ description.
+
+2005-04-20 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
+ * FIX : Numerical exception on borland (cannot divide by 0, doh !)
+ But this is a case where we should really signify the user there is
+ few chance the serie is really a serie...
+
+2005-04-20 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * FIX : on X, the python part is correctly installed. All files are
+ installed in gdcm sub-directory
+
+2005-04-19 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Builder/ : add something to facilitate the RPM creation of gdcm
+
+2005-04-15 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
+ * Fix gdcmDirList::IsDirectory. Apparently borland did not like the ending
+ '/'
+ * Also fix compilation on gcc 3.3.5 does not have ios::failure either ...
+
+2005-04-11 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
+ * vtk/vtkGdcmWriter fix bug when writing spacing. The Y spacing comes first
+ then the X spacing.
+ * Fix compilation on gcc 2.96 (which does not have ios::failure)
+
+2005-04-05 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmDictGroupName.[h|cxx] : add a correlation between a group (number)
+ and it's representation name (for the NIH)
+
+2005-03-31 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmPixelReadConvert.cxx : problems of around of double to uint8, when
+ conversion of YBR to RGB pixels. So, now, the conversion is made using
+ integers only
+
+2005-03-30 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Testing/TestAllReadCompareDicom.cxx : now use test files (invented file
+ format) to replace 'at-run' dicom files generated by the
+ TestAllReadCompareDicom test
+
+2005-03-07 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmFileHelper.cxx : remove memory leaks and bugs when writing files
+
+2005-02-22 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmFileHelper.cxx : JPR bad personal choices fix
+
+2005-02-11 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Testing/TestMAkeIcon.cxx : complete the test
+
+2005-02-10 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Testing/TestWriteSimple.cxx, TestSequence.cxx : fix memroy leaks
+
+2005-02-09 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmFileHelper.[h|cxx] : now correctly set the VR of the datas when
+ writting the file
+
+2005-02-09 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Test/VTKTestWriteSeq.cxx : add a VTK test to write sequences
+
+2005-02-09 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Test/ : accelerate tests (it's not very significant accelerations).
+ Remove TestCopyDicom that is redundant with TestCopyRescaleDicom
+
+2005-02-07 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Testing/TestSequence.cxx : add test for sequences of images... test that
+ we have the same serie or the same study UID
+
+2005-02-07 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * gdcmPython/gdcm.i : bug fix. Now string are correctly converted in python
+ string type
+ * src/gdcmDict.h : remove commented code
+ * src/gdcmDocument.cxx : initialize values
+ * src/gdcmFile.cxx : bug fix when reading values
+ * gdcmPython/demo/ : change file names. Remove useless files
+
+2005-02-04 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmFile.cxx : remove the default array of initialization.
+ The static array contained pointers to non-static values (comming from
+ strings). To have coherences, when creating files, these values can't be
+ static. So, the array can't be static, too ! To simplify, the array have
+ been replaced by repeted lines to insert values in the File
+
+2005-02-03 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmBinEntry.cxx : bug fix for BIG_ENDIAN part when writing the content
+ * gdcmPython/gdcm.i : rename gdcmHeader to gdcmHelper
+
+2005-02-02 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
+ * FIX SQItem::AddEntry inserts now *in the right place* any Entry
+ (Dicom Element) into the Sequence Item
+
+2005-01-31 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/*.cxx : first parss to normalize file organisation
+
+2005-01-31 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmDirList.[h|cxx] : add method to find a directory
+ * Test/TestAllReadCompareDicom.cxx : bug fix under Windows
+
+2005-01-31 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
+ * Finish cleaning up my JPEG mess. Should be ok now.
+ * Getting toward a RLE very similar to JPEG. Every RLE stuff is now self
+ contained within the RLE* class(doh!)
+
2005-01-30 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
* SerieHeader::SetDirectory() allow recursive exploration of the Directory
* SerieHeader::AddFileName() creates as many Coherent Files lists
(same Serie UID) as it founds different Serie UID
- amongst the files insead of discarting any file
+ amongst the files instead of discarting any file
that doesn't match with the first one he found.
- * SerieHeader::OrderGdcmFileListhas now pne parameter :
+ * SerieHeader::OrderGdcmFileList has now one parameter :
the Coherent Files list the user wants to sort
- * SerieHeader::GetFirstCoherentFileList()
- * SerieHeader::GetLastCoherentFileList() allows to parse
+ * SerieHeader::GetFirstCoherentFileList() |
+ * SerieHeader::GetLastCoherentFileList() | allow to parse
the set of Coherent Files lists
* const SerieHeader::GdcmFileList &GetGdcmFileList() is kept, for backwards
compatibility (it returns the *first* Coherent Files list,
2004-10-13 Eric Boix <Eric.Boix@creatis.insa-lyon.fr>
* Doc/Website/MailingList.html added (Sidebar.html changed accordingly).
* gdcmPython/gdcm.i: fix for compilation of wrappers (Note: %include order
- matters, as stated in warning note at begining of %include section).
+ matters, as stated in warning note at beginning of %include section).
* src/gdcmDicomDir*.[cxx|h]: coding style
* src/gdcmDocument.h: doxygen \ref seems uncompatible with \todo.
* src/gdcmJpeg8.cxx: doxygen fix.
entries within the associated public Dicom dictionary resp. the same
information but sorted by the fourth field (PAT, IMG, DIR) of the
dictionary.
- - Dicts/dicomV3.dic Entries which had and unspecified fourth field
+ - Dicts/dicomV3.dic Entries which had an unspecified fourth field
are now in the "???" group.
- python/gdcm.i changed accordingly,
- python/demo/printGroupedPublicDict.py added, that gives an example
2002-11-18 Eric Boix <Eric.Boix@creatis.insa-lyon.fr>
* src/gdcm.h and gdcmHeader.cxx are now "Big Endian transfer syntax"
- aware. See the strategy comments in gdcmHeader::FindeLength().
+ aware. See the strategy comments in gdcmHeader::FindLength().
* Test/test.cxx now accepts a filename as first argument.
* Data/US-PAL-8-10x-echo.dcm and US-RGB-8-epicard.dcm added.
* python/testSuite.py changed to integrate test on above files.
2002-10-31 Eric Boix <Eric.Boix@creatis.insa-lyon.fr>
* Straightforward temporary fixes for swig to build the python wrappers.
src/Makefile now has a python working entry [by working we mean
- that we can import de shadow classes without errors].
+ that we can import the shadow classes without errors].
2002-10-29 Eric Boix <Eric.Boix@creatis.insa-lyon.fr>
* hashtest.cxx removed (since already in Test)