+2005-04-11 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
+ * vtk/vtkGdcmWriter fix bug when writing spacing. The Y spacing comes first
+ then the X spacing.
+ * Fix compilation on gcc 2.96 (which does not have ios::failure)
+
+2005-04-05 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmDictGroupName.[h|cxx] : add a correlation between a group (number)
+ and it's representation name (for the NIH)
+
+2005-03-31 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmPixelReadConvert.cxx : problems of around of double to uint8, when
+ conversion of YBR to RGB pixels. So, now, the conversion is made using
+ integers only
+
+2005-03-30 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Testing/TestAllReadCompareDicom.cxx : now use test files (invented file
+ format) to replace 'at-run' dicom files generated by the
+ TestAllReadCompareDicom test
+
+2005-03-07 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmFileHelper.cxx : remove memory leaks and bugs when writing files
+
+2005-02-22 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmFileHelper.cxx : JPR bad personal choices fix
+
+2005-02-11 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Testing/TestMAkeIcon.cxx : complete the test
+
+2005-02-10 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Testing/TestWriteSimple.cxx, TestSequence.cxx : fix memroy leaks
+
+2005-02-09 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmFileHelper.[h|cxx] : now correctly set the VR of the datas when
+ writting the file
+
+2005-02-09 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Test/VTKTestWriteSeq.cxx : add a VTK test to write sequences
+
+2005-02-09 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Test/ : accelerate tests (it's not very significant accelerations).
+ Remove TestCopyDicom that is redundant with TestCopyRescaleDicom
+
+2005-02-07 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Testing/TestSequence.cxx : add test for sequences of images... test that
+ we have the same serie or the same study UID
+
+2005-02-07 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * gdcmPython/gdcm.i : bug fix. Now string are correctly converted in python
+ string type
+ * src/gdcmDict.h : remove commented code
+ * src/gdcmDocument.cxx : initialize values
+ * src/gdcmFile.cxx : bug fix when reading values
+ * gdcmPython/demo/ : change file names. Remove useless files
+
+2005-02-04 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmFile.cxx : remove the default array of initialization.
+ The static array contained pointers to non-static values (comming from
+ strings). To have coherences, when creating files, these values can't be
+ static. So, the array can't be static, too ! To simplify, the array have
+ been replaced by repeted lines to insert values in the File
+
+2005-02-03 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmBinEntry.cxx : bug fix for BIG_ENDIAN part when writing the content
+ * gdcmPython/gdcm.i : rename gdcmHeader to gdcmHelper
+
+2005-02-02 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
+ * FIX SQItem::AddEntry inserts now *in the right place* any Entry
+ (Dicom Element) into the Sequence Item
+
+2005-01-31 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/*.cxx : first parss to normalize file organisation
+
+2005-01-31 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmDirList.[h|cxx] : add method to find a directory
+ * Test/TestAllReadCompareDicom.cxx : bug fix under Windows
+
+2005-01-31 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
+ * Finish cleaning up my JPEG mess. Should be ok now.
+ * Getting toward a RLE very similar to JPEG. Every RLE stuff is now self
+ contained within the RLE* class(doh!)
+
+2005-01-30 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
+ * SerieHeader::SetDirectory() allow recursive exploration of the Directory
+ * SerieHeader::AddFileName() creates as many Coherent Files lists
+ (same Serie UID) as it founds different Serie UID
+ amongst the files instead of discarting any file
+ that doesn't match with the first one he found.
+ * SerieHeader::OrderGdcmFileList has now one parameter :
+ the Coherent Files list the user wants to sort
+ * SerieHeader::GetFirstCoherentFileList() |
+ * SerieHeader::GetLastCoherentFileList() | allow to parse
+ the set of Coherent Files lists
+ * const SerieHeader::GdcmFileList &GetGdcmFileList() is kept, for backwards
+ compatibility (it returns the *first* Coherent Files list,
+ since there was only one before)
+ * Test/TestSerieHeader gets gdcmData as a default root directory
+
+2005-01-28 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Remove friend between DocEntry and File classes
+ * Remove friend between PixelReadConverter and RLEFramesInfo,
+ JPEGFragmentsInfo
+
+2005-01-28 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmFile.cxx, gdcmDocument.cxx : fix the bug on the group|element
+ 0002|0000. The value was incorrect.
+
+2005-01-28 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * vtk/vtkGdcmWriter.[h|cxx] : add the gestion of UID
+
+2005-01-28 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmUtil.cxx : compilation fix on Win32
+ * src/gdcmUtil.[h|cxx] : Set the default GDCM UID in a static constant
+ variable, to be easy found. Add methods to change the default UID.
+ Amelioration of the CreateUniqueUID to use the correct default UID.
+ * src/gdcmFile.cxx : correct use of the CreateUniqueUID method to create
+ a new file
+
+2005-01-28 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Test/TestVR.cxx : fix memory leaks
+
+2005-01-27 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
+ * Rewrite the base 256 to base 10 conversion, using string operation only.
+ This allows us to get rid of the problematic 64bits integer type (does not
+ always exist on target platform).
+
+2005-01-27 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
+ * Add construct and destructor to class gdcm::Debug to close the debug file
+ automatically
+ * Don't let uset to open twice the same file
+ * gdcm has now an official UID prefix,
+ supplied by http://www.medicalconnections.co.uk
+ 1.2.826.0.1.3680043.2.1143
+ (Thx to Mathieu for providing URL)
+ * Add a forty-entries private Dicom Dictionary (Philips MR Intera)
+ to be able to perform some more tests
+ * gdcm::ContentEntry : Contructors and Destructor are now protected,
+ in order to be sure no user will try to use them.
+ (at user level, only the children classes are meaningfull)
+
+2005-01-26 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * move RLEInfo & JPEGInfo from Document to File
+
+2005-01-26 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * FIX : remove so many friend between classes
+
+2005-01-25 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmDocEntrySet.cxx : Bug fix when getting the value
+ * src/gdcmContentEntry.[h|cxx], gdcmValEntry.cxx : amelioration of code
+
+2005-01-25 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
+ In order to avoid missbehaviour :
+ . gdcm::DocEntry is now specialized in
+ - gdcm::SeqEntry (Dicom Sequence) as opposed to :
+ - gdcm::ContentEntry (Dicom entry with a 'content')
+ . gdcm::ContentEntry is specialized in
+ - gdcm::ValEntry (Dicom entry with a std::string representable value, i.e.
+ characters value, or integers)
+ - gdcm::BinEntry (Dicom entry with a non strig representable value
+ (user hasn't any longer to thing about the precedence of his dynamic_casts)
+
+2005-01-25 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Test/VTKTest*.cxx : bug fix under linux
+
+2005-01-25 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/ : rename some methods on Entry (SetXxx, InsertXxx) to have a better
+ use with python. Some methods are moved from Document to ElementSet or
+ DocEntrySet. The equivalent methods to ElementSet have been added to
+ SQItem and are virtual in DocEntrySet. Methods that may have the same code
+ in SQItem and ElementSet is directly placed in DocEntrySet
+
+2005-01-25 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * Test/VTKTest*.cxx : remove the show variable in each test method because
+ it's useless (the viewer variable replace this variable)
+
+2005-01-25 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmDocument.cxx : bug fix on potential memory leak
+ * src/gdcmSQItem.cxx : initialize the SQItemNumber value in the constructor
+ * src/gdcmSQItem.[h|cxx], gdcmElementSet.[h|cxx], gdcmDicomDir*.[h|cxx] :
+ Add ClearXxx methods to remove all the content of the list or map
+ * gdcmDocEntrySet.h : add GetFirst/NextEntry in pure virtual
+
+2005-01-25 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
+ * methods ReplaceOrCreate renamed as Insert
+ (nobody will be any longer confused by 'CreateOrReplace')
+
+2005-01-24 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
+ * Grealty simplify the JPEg decompression, no need to differenciate based on
+ the JPEG possible type (with/without fragment, with/without multiple frame).
+ Everything is done throught the JPEG IO Suspension mechanism in IJG
+
+2005-01-24 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
+ * Stage 3 of normalization :
+ in order to avoid any missunderstanding while reading method names :
+ - All the methods xxxEntry now deal with dicom Entries
+ - Methods GetEntry splitted into
+ GetEntryValue
+ GetEntryBinArea
+ - Method SetEntry renamed as SetEntryValue
+ - Method SetEntryBinArea let as it was
+
+2005-01-24 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
+ - Add empty nutshell for JPEG-LS (JPG-LS in NOT jpeg 'lossless')
+ - Position correctly the entry points for JPEG2000 and JPEG-LS
+ (Now Fragments info is get from the file, even for JPEG2000 and JPEG-LS)
+
+2005-01-22 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmDicomDirElement.h, gdcmDict.h : rename AddNewXxx methods to AddXxx.
+ * src/gdcmDict.h : rename GetDictEntry moethod to GetEntry, to be coherent
+ with other method names
+ * gdcmPython/gdcm.i : bug fix. Add the typemaps for the TagName type
+ * Test/TestDicomDirElement.cxx : add new test
+
+2005-01-22 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
+ * Finish the CreateUniqueUID stuff. Seems to compiled/runs on every
+ plateforms ITK support. Had some troubles with uint64_t on Win32, go to
+ http://msdn.microsoft.com/library/default.asp?url=/library/en-us/vclang/html/_langref_data_type_ranges.asp
+ for more info. Basically you can not used 'unsigned' __int8 in an ostream.
+ So can't you use __int64 in ostream at all.
+
+2005-01-22 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * bug fix for compilation on MSVC6
+ * gdcmPython/gdcm.i : rename of classes missed
+
+2005-01-21 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
+ * Stage 2 of names normalization :
+ - A gdcm::Document is now either a gdcm::DicomDir or a gdcm::File
+ (easy to understand ...)
+ - gdcm::FileHelper replaces old class gdcm::File
+
+2005-01-20 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * gdcmDicomDirElement.[h|cxx] : change the AddEntry method. Now, it gets a
+ type and not a string. So, there remove problems on the format of the
+ string.
+
+2005-01-20 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
+ * Add Example/TestPapyrus.cxx
+ - reads a Papyrus file (gdcm::Header compliant),
+ - gets the pixels of all the images, using low level iterators
+ - writes an multiframes Dicom image.
+ (Just to show it's *possible* to do that)
+ Uses SQItems accessors (we could use it as a 'Test' program, to improve test
+ coverage ...)
+
+2005-01-20 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmDicomDirObject.h : set the FillObject method in protected.
+ Thus, DicomDirXXX are created with a flad that indicates if the created
+ object is empty or not (when not empty, the DicomDirElement is used to
+ fill the object)
+
+2005-01-20 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
+ * src/gdcmDicomDir.cxx : simplify the NewPatient method, like made in
+ gdcm::DicomDirPatient, gdcm::DicomDirStudy, gdcm::DicomDirSerie
+
2005-01-20 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
* src/gdcmSQItem[h|cxx] : rename some methods to have coherent names
* gdcmPython/demo/*.py.in : Change the InitTraversal/GetNextEntry use to
GetFirstEntry/GetNextEntry use
+2005-01-18 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
+ * In SerieHeader::ImagePositionPatientOrdering()
+ // a Dicom 'Serie' may contain scout views
+ // and images may have differents directions.
+ // -> More than one may have the same 'pos'
+ // Sorting has then NO meaning !
+ Thx to Eduardo Davila for reporting bug.
+
2005-01-18 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
* Test/ShowDicom.cxx, ShowDicomSeq.cxx, TestWriteWithVTK.cxx : change the
test. Now it's on image content and not on the resulting visualisation...
2005-01-18 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
* ENH for DicomDir, DicomDirPatient, DicomDirStudy,
- DicomDirSerie, DicomDirImage
- Dict, DictSet classes :
+ DicomDirSerie, DicomDirImage
+ Dict, DictSet classes :
-add method GetFirstEntry to replace call to InitTraversal+GetNextEntry
-remove InitTraversal method.
- * UPD Test programs + Example programs
+ * UPD Test programs + Example programs
2005-01-18 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
- remove useless and never updated keyword \ingroup
+ * remove useless and never updated keyword \ingroup
+ * Solve pb when structure (list, map, ...) is empty.
+ Thx to Benoit for reporting bug
+
+2005-01-18 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
+ * Taking into account of 'Transfer Syntax' value
+ (for 'true' Dicom V3 files, the 'ACR-NEMA' heuristics sometimes gives
+ unaccurate result)
2005-01-17 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
* src/gdcmUtil.cxx : bug fix to find the Windows MAC address. Now, there
* gdcmPython/demo : add python demos using VTK
2005-01-16 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
- * FIX 'Dictionnary' is now spelt 'Dictionary'
- 'wether' is now spelt 'whether'
- 'archieve' is now spelt 'archive' ;-)
+ * FIX 'Dictionnary' is now spelt 'Dictionary'
+ 'wether' is now spelt 'whether'
+ 'archieve' is now spelt 'archive' ;-)
2005-01-15 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
* ADD DicomDir, DicomDirPatient, DicomDirStudy, DicomDirSerie, DicomDirImage
- related methods, in order not to expose internal mechanisms
+ related methods, in order not to expose internal mechanisms
InitTraversal();
GetNextEntry();
- * REM methods that exposed internal mechanisms :
+ * REM methods that exposed internal mechanisms :
DicomDir::GetDicomDirPatients()
DicomDirPatient::GetDicomDirStudies()
DicomDirStudy::GetDicomDirSeries()
DicomDirSerie::GetDicomDirImages()
- * UPD Test programs :
- makeDicomDir.cxx
- BuildUpDicomDir.cxx
- TestDicomDir.cxx
- * UPD Example program
- PrintDicomDir.cxx
+ * UPD Test programs :
+ makeDicomDir.cxx
+ BuildUpDicomDir.cxx
+ TestDicomDir.cxx
+ * UPD Example program
+ PrintDicomDir.cxx
* ADD DictSet methods
InitTraversal()
GetNextEntry()
2005-01-15 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
* Removed the Print/indent/default parameter mess. There is absolutely no
- reason to have to methods, moreover with the second taking the ostream as
- *SECOND* parameter. This was clearly a bad hack to get things compile.
+ reason to have to methods, moreover with the second taking the ostream as
+ *SECOND* parameter. This was clearly a bad hack to get things compile.
2005-01-15 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
* Complete rewrite of the GetMacAddress code. Now the code is *much*
- smaller (no more MacOSX specific crap). A lot more POSIX oriented.
- Unfortunately the main code does not work on SunOS, thus provide a specific
- code for this platform only (and Win32 of course). Since this seems to be
- working, change CreateUniqueUID to use GetMACAddress instead of the
- problematic GctestetIPAddress
+ smaller (no more MacOSX specific crap). A lot more POSIX oriented.
+ Unfortunately the main code does not work on SunOS, thus provide a specific
+ code for this platform only (and Win32 of course). Since this seems to be
+ working, change CreateUniqueUID to use GetMACAddress instead of the
+ problematic GctestetIPAddress
2005-01-14 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
* Unfortunately to be able to test gdcmDirList I had to break the API
2005-01-13 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
* ENH - Comment out Mathieu's (dangerous) Super Hack
- for dealing with BIGENDIAN processors
- - Move equivalent stuff to BinEntry::WriteContent
- When necessary, 16 Bits Pixels are swapped in a small buffer
- and then written. This avoid allocating a huge buffer, in
- PixelWriteConvertor, and avoid modifying the Pixel Area.
- Note :
- Probabely, the same operation will have to be done when we want
- to write image with Big Endian Transfert Syntax,
- and we are working on Little Endian Processor
-
+ for dealing with BIGENDIAN processors
+ - Move equivalent stuff to BinEntry::WriteContent
+ When necessary, 16 Bits Pixels are swapped in a small buffer
+ and then written. This avoid allocating a huge buffer, in
+ PixelWriteConvertor, and avoid modifying the Pixel Area.
+ Note :
+ Probabely, the same operation will have to be done when we want
+ to write image with Big Endian Transfert Syntax,
+ and we are working on Little Endian Processor
+
2005-01-14 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
* src/gdcmDocument.[h|cxx] : comment all methods concerning a flat hash
table.
2005-01-13 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
* merging of Test/PrintDicomDir and Test/TestDicomDir
- * removal of now redundant Test/PrintDicomDir
- * enhancement of Example/PrintDicomDir
+ * removal of now redundant Test/PrintDicomDir
+ * enhancement of Example/PrintDicomDir
2005-01-13 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
* Now, python test might work on systems
2005-01-13 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
* FIX : First entry following group 0002 was lost for
- Explicit Big Endian Transfer Syntax files
+ Explicit Big Endian Transfer Syntax files
(group and elem not swaped)
-
+
2005-01-12 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
* FIX : Old quick and dirty 'optimistic' heuristic to deal with
- Big Endian Transfer Syntax supposed the group following 0002
- begins always by element 0000 (element 0000 is *optional*)
- To avoid further troubles, let's be pessimistic, and use
- Document::HandleOutOfGroup0002() method
- * FIX : comparison between GDCM_NOTLOADED and Transfer Syntax
+ Big Endian Transfer Syntax supposed the group following 0002
+ begins always by element 0000 (element 0000 is *optional*)
+ To avoid further troubles, let's be pessimistic, and use
+ Document::HandleOutOfGroup0002() method
+ * FIX : comparison between GDCM_NOTLOADED and Transfer Syntax
(related pb not yet solved)
2005-01-12 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
2005-01-11 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
* Replace confusing name SwitchSwapToBigEndian name by SwitchByteSwapCode
* Add the Document::HandleOutOfGroup0002(uint16_t group) method
- to swap the Swap Code, at parsing time, when we come out of group 0002
- and Transfer Syntax is Big Endian
- We should be able to read now 'true DICOM" Big Endian coded images
- * Add optional run time SetDebugOn (last param) for PrintHeader, PrintFile
- * Replace the french 'Transfert Syntax' by the english 'Transfer Syntax'
+ to swap the Swap Code, at parsing time, when we come out of group 0002
+ and Transfer Syntax is Big Endian
+ We should be able to read now 'true DICOM" Big Endian coded images
+ * Add optional run time SetDebugOn (last param) for PrintHeader, PrintFile
+ * Replace the french 'Transfert Syntax' by the english 'Transfer Syntax'
2005-01-10 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
* Hopefully fix the bug on MacOSX and static global initialization.
2005-01-08 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
* Fix bug on MacOSX with static initialization in a multy threaded
- environment. static const string in a header file used to be ill
- initialized provoquing the freeze of any tests. patch should solve this
- issue.
+ environment. static const string in a header file used to be ill
+ initialized provoquing the freeze of any tests. patch should solve this
+ issue.
2005-01-08 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
* According to Benoit's suggestion, and without any objection from anybody
* Removal of useless and dangerous methods :
GetEntryByName, GetEntryVRByName, GetDocEntryByName, SetEntryByName
GetDocEntryByName, GetEntryByName, GetDictEntryByName
- * Removal of usless methods :
+ * Removal of usless methods :
Dict::PrintByName, Dict::GetDictEntryByName
* Commenting out of probabely useless methods :
Dict::GetDictEntryNames()
Dict::GetDictEntryNamesByCategory()
DictSet::GetPubDictEntryNames()
- DictSet::GetPubDictEntryNamesByCategory()
- * ENH : New Dicom Dictionary (with Value Multiplicity) is now used
- * ENH : Use dicomTS.dic as described in 2004 version
- * ENH : Removal out of the Dicom Dictionary of non dicom 'fourth' field
+ DictSet::GetPubDictEntryNamesByCategory()
+ * ENH : New Dicom Dictionary (with Value Multiplicity) is now used
+ * ENH : Use dicomTS.dic as described in 2004 version
+ * ENH : Removal out of the Dicom Dictionary of non dicom 'fourth' field
Add to the Dicom Dictionary of Dicom 'Value Multiplicity' field
- Add Accessors on VM (Value Multiplicity), and VM related methods
+ Add Accessors on VM (Value Multiplicity), and VM related methods
* ADD : Add a list of 'Dicom Attribute types', as found in
http://medical.nema.org/dicom/2004/04_15PU.PDF
- Unused till now...
- * ADD : Add dicomGroupNameAbbreviations.dic
+ Unused till now...
+ * ADD : Add dicomGroupNameAbbreviations.dic
should be used to write a method to replace the former
Dict::GetDictEntryNamesByCategory()
2005-01-05 Jean-Pierre Roux <jpr@creatis.univ-lyon1.fr>
* ADD : Add the method Util::IsCurrentProcessorBigEndian
(we'll need it for 'Explicit VR Big Endian' Transfert Syntax)
- * ADD Method Document::ComputeGroupLength
- * ENH : now parsing creates a Vitual DictEntry for Pixels Element,
+ * ADD Method Document::ComputeGroupLength
+ * ENH : now parsing creates a Vitual DictEntry for Pixels Element,
in order to allow further VR modification by user
- * REM : removal of once-called method File::WriteBase
- integration of its code in formerly one-line method File::Write
+ * REM : removal of once-called method File::WriteBase
+ integration of its code in formerly one-line method File::Write
2005-01-05 Benoit Regrain <Benoit.Regrain@creatis.insa-lyon.fr>
* src/gdcmCommon.h : add the GDCM_UNKNOWN constant. This constant is to
2004-10-13 Eric Boix <Eric.Boix@creatis.insa-lyon.fr>
* Doc/Website/MailingList.html added (Sidebar.html changed accordingly).
* gdcmPython/gdcm.i: fix for compilation of wrappers (Note: %include order
- matters, as stated in warning note at begining of %include section).
+ matters, as stated in warning note at beginning of %include section).
* src/gdcmDicomDir*.[cxx|h]: coding style
* src/gdcmDocument.h: doxygen \ref seems uncompatible with \todo.
* src/gdcmJpeg8.cxx: doxygen fix.
A lot of things should be OK again.
It's really urgent to have a test suite that *tests*,
to prevent Frog's beautifying sessions to break all the stuff
- (twice, withing a fortnigh ...)
+ (twice, withing a fortnigh ...)
2004-06-28 Eric Boix <Eric.Boix@creatis.insa-lyon.fr>
* Test/TestWriteRead.cxx and TestReadWrite.cxx merged (because of
ADD virtual gdcmDocEntry *GetDocEntryByNumber(guint16 group,guint16 element) = 0;
ADD gdcmDocEntry *GetDocEntryByName(std::string name);
ADD virtual std::string GetEntryByNumber(guint16 group,guint16 element) = 0;
- ADD std::string GetEntryByName(TagName name);
+ ADD std::string GetEntryByName(TagName name);
ADD gdcmDictEntry *NewVirtualDictEntry(guint16 group,
guint16 element,
std::string vr = "unkn",
REM gdcmDocEntry *NewDocEntryByName (std::string Name);
REM gdcmValEntry *NewValEntryByNumber(guint16 group, guint16 element);
REM gdcmBinEntry *NewBinEntryByNumber(guint16 group, guint16 element);
-
- - gdcmElementSet
- ADD virtual void Write(FILE *fp, FileType filetype);
-
+
+ - gdcmElementSet
+ ADD virtual void Write(FILE *fp, FileType filetype);
+
- gdcmSeqEntry
- ADD virtual void Write(FILE *fp,FileType filetype);
+ ADD virtual void Write(FILE *fp,FileType filetype);
- gdcmSQItem
ADD virtual void Write(FILE *fp, FileType filetype);
- ADD virtual std::string GetEntryByNumber(guint16 group, guint16 element);
+ ADD virtual std::string GetEntryByNumber(guint16 group, guint16 element);
REM std::string GetEntryByNumber(guint16 group, guint16 element);
REM std::string GetEntryByName(TagName name);
- gdcmValEntry
- ADD virtual void gdcmValEntry::Write(FILE *fp, FileType filetype);
-
+ ADD virtual void gdcmValEntry::Write(FILE *fp, FileType filetype);
+
2004-06-21 Eric Boix <Eric.Boix@creatis.insa-lyon.fr>
* Test/TestWriteSimple.cxx: fix to gdcmHeader-gdcmHeaderHelper revamping.
The default constructor invoked by the line
- Specific clean up of Parse7FE0() (umproperly named actually).
* gdcmPython/testSuite.py: an odd temporary kludge introduced.
-2004-06-14 Jean-Pierre Roux
+2004-06-14 Jean-Pierre Roux
* gdcmSeqEntry.cxx
- - fix the display of Sequence Delimitor (SQDepthLevel pb)
- - fix the display of SQItem ordinal number
+ - fix the display of Sequence Delimitor (SQDepthLevel pb)
+ - fix the display of SQItem ordinal number
- add the GetSQItemByOrdinalNumber method
- - remove some useless never written private methods
-
+ - remove some useless never written private methods
+
2004-06-14 Jean-Pierre Roux
* gdcmBinEntry.cxx
- adding a constructor taking a gdcmDocEntry as an input param
- - ReplaceOrCreateByNumber now returns :
- a gdcmBinEntry * if a Binary (void *) value is passed as a param
- a gdcmValEntry * if a string value is passed as a param
+ - ReplaceOrCreateByNumber now returns :
+ a gdcmBinEntry * if a Binary (void *) value is passed as a param
+ a gdcmValEntry * if a string value is passed as a param
* dcmDocument.cxx
- SetEntryByNumber now allows setting gdcmValEntry or gdcmBinEntry,
- according to the param type (no longer sets a gdcmDocEntry)
- - GetValEntryByNumber, GetBinEntryByNumber added
+ according to the param type (no longer sets a gdcmDocEntry)
+ - GetValEntryByNumber, GetBinEntryByNumber added
- NewValEntryByNumber and NewBinEntryByNumber added
* gdcmFile.cxx
- Pixel Data are now linked to the (7fe0,0010) elements, after reading
- GetSQItemNumber and SetSQItemNumber added, to provide
a (relative) Item identier inside a given Sequence
\warning : some pb remaining around this number
- will be solved asap
- - AddEntry now takes the Item Number as a param
+ will be solved asap
+ - AddEntry now takes the Item Number as a param
* gdcmValEntry.cxx
- - adding a constructor taking a gdcmDocEntry as an input param
+ - adding a constructor taking a gdcmDocEntry as an input param
2004-06-14 Eric Boix <Eric.Boix@creatis.insa-lyon.fr>
* Memory leak hunt with the following command:
SeQuence indented printing of Dicom Header.
* ENH merge methods gdcmParser::Parse and gdcmParser::LoadHeaderEntries
into the single gdcmParser::LoadHeaderEntries for efficiency purpose.
- Computation of SQDepthLevel is now part of gdcmHeader constructor
+ Computation of SQDepthLevel is now part of gdcmHeader constructor
* ENH add self defined param 'new' to PrintHeader to 'show' the SeQuence
tree-like structure of a Dicom Header.
* FIX Test code cleaning
* ENH Minor changes to the Print() methods.
* ADD gdcmParser::PrintEntryNiceSQ() to allow SQ-indented
Header printing. Example given with :
- > PrintHeader fileName 2 new
+ > PrintHeader fileName 2 new
(SQ based tree-like structure still to be done for the Header ...)
-
+
2004-04-22 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
* ENH: Some cosmetic clean up for compilation with -W -Wall -Werror
1. I have added some unsigned where needed
* FIX gdcmHeaderHelper::GetXSpacing
when a single value is found (bug ?), xpacing is now
defaulted to yspacing
-
+
2004-04-19 Jean-Pierre Roux
* ADD gdcmData/Wrist.pap (PAPYRUS 3.0 -single frame-) for checking purpose
* ENH add parameters :
bool exception_on_error = false,
bool enable_sequences = false,
- bool ignore_shadow = false
+ bool ignore_shadow = false
to the gdcmFile constructors to be full gdcmParser compliant
* FIX vtk/vtkGdcmReader.cxx now uses enable_sequences = true in gdcmFile
to allow reading of PAPYRUS 3.0 files
-
+
2004-04-06 Jean-Pierre Roux
* ADD gdcmData/E00001S03I0015.dcm for SQ checking purpose
* ADD : Test/checksequence.sh, for a general recap on SQ pb
* FIX : gdcmParser::WriteEntryTagVRLength emprovement of special treatement
for Philips spurious Tag fffe|0000 while rewritting Dicom files
-
+
2004-03-30 Jean-Pierre Roux
* FIX gdcmParser::ReplaceOrCreateByNumber shouldn't seg fault any more
for ACR file, written out as DICOM files (hope so...)
from gdcmParser::WriteEntry to gdcmParser::WriteEntries
* FIX : gdcmObject::ResetBoundaries now stops properly
when end-of-list is reached
- : gdcmVersion modified (as Benoit Regrain asked)
+ : gdcmVersion modified (as Benoit Regrain asked)
2004-03-29 Eric Boix <Eric.Boix@creatis.insa-lyon.fr>
* src/gdcmParser.cxx: removal of all TAB character. Indentation fixed.
add gdcmDicomDirPatient:NewStudy
add gdcmDicomDirStudy:NewSerie
add gdcmDicomDirSerie:NewImage
- to allow making gdcDicomDir object.
+ to allow making gdcDicomDir object.
* ADD PrintDicomDir executable that uses gdcmDicomDir tree-like structure
(as opposite to the gdcmHeader chained list)
2004-02-11 Benoit Regrain
* FIX : memory leaks and the set of ArgDelete methods in gdcmDicomDir
when using from python
-
+
2004-02-10 Benoit Regrain
* FIX : bug fix in the gdcmDirList for the recursivity in directories
* FIX : in gdcmDicomDir when the directory is empty
not longer on the TagElValueHT tagHt member
* ENH : PrintPubElVal shows (temporarily) both results,
with the tagHt member and the listElem member.
- (it's easier to 'see' the problems when using Printheader)
+ (it's easier to 'see' the problems when using Printheader)
* FIX : old private member LgrElem is now splitted into
ReadLength : Length actually found on disk (updated only
- if bug fixing is necessary), for internal
- use only
- UsableLength : Updated by FixFoundLength, to fix a bug
- or to allow Parser going on.
- Will allow to re-write a kosher header when a SeQuence
- with a length (not 0000) is found
+ if bug fixing is necessary), for internal
+ use only
+ UsableLength : Updated by FixFoundLength, to fix a bug
+ or to allow Parser going on.
+ Will allow to re-write a kosher header when a SeQuence
+ with a length (not 0000) is found
Warning : gdcmFile::Write still uses the TagHt (not ListElem)
- because gdcmElValSet::Add does not update ListElem
- (to be written)
+ because gdcmElValSet::Add does not update ListElem
+ (to be written)
2003-11-07 Jean-Pierre Roux
* FIX misstyping in Transfert Syntax name table
2003-10-29 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
* ENH: Can be used like this '$vtkgdcmViewer *.dcm' with *.dcm
- being coherents dicom files.
+ being coherents dicom files.
2003-10-29 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
* FIX: DOH ! Forgot about windo$e users, they couldn't read lossless jpeg,
- deals with YcBcR (YBR_FULL) files
- deals with YBR_YBR_FULL_422 files (they work as RBG files ?!?)
WARNING : nothing was checked for YBR_PARTIAL_422, YBR_ICT,
- YBR_RCT files.
+ YBR_RCT files.
(no sample found :-(
2003-10-02 Mathieu Malaterre <Mathieu.Malaterre@creatis.insa-lyon.fr>
entries within the associated public Dicom dictionary resp. the same
information but sorted by the fourth field (PAT, IMG, DIR) of the
dictionary.
- - Dicts/dicomV3.dic Entries which had and unspecified fourth field
+ - Dicts/dicomV3.dic Entries which had an unspecified fourth field
are now in the "???" group.
- python/gdcm.i changed accordingly,
- python/demo/printGroupedPublicDict.py added, that gives an example
2002-11-18 Eric Boix <Eric.Boix@creatis.insa-lyon.fr>
* src/gdcm.h and gdcmHeader.cxx are now "Big Endian transfer syntax"
- aware. See the strategy comments in gdcmHeader::FindeLength().
+ aware. See the strategy comments in gdcmHeader::FindLength().
* Test/test.cxx now accepts a filename as first argument.
* Data/US-PAL-8-10x-echo.dcm and US-RGB-8-epicard.dcm added.
* python/testSuite.py changed to integrate test on above files.
2002-10-31 Eric Boix <Eric.Boix@creatis.insa-lyon.fr>
* Straightforward temporary fixes for swig to build the python wrappers.
src/Makefile now has a python working entry [by working we mean
- that we can import de shadow classes without errors].
+ that we can import the shadow classes without errors].
2002-10-29 Eric Boix <Eric.Boix@creatis.insa-lyon.fr>
* hashtest.cxx removed (since already in Test)