#-----------------------------------------------------------------------------
# DICOM dictionary stuff
+#-----------------------------------------------------------------------------
+# Generate our own 'DICOM' dictionary, based on the following dictionaries:
+SET(ALL_DICTS
+ dicomV3.dic
+ #Papyrus.dic
+ #NIH.dic #the forbidden one...
+ # SPI.dic
+ # PHILIPS-Intera.dic # uncomment me if you want
+ #GEMS.dic #Commented out to avoid polluting 'non GEMS' images
+ #GEMS-HiSpeed.dic
+ # GEMS-Advance.dic
+ )
+
+# Better solution
+SET(TEST_DICT_BODY)
+FOREACH(dict ${ALL_DICTS})
+ # Properly set dependencies, therefore `touch Philips-Intera.dic` does not rebuild
+ # but adding/removing a line in Philips-Intera.dic rebuild as expected
+ CONFIGURE_FILE("${GDCM_SOURCE_DIR}/Dicts/${dict}"
+ "${GDCM_BINARY_DIR}/Dicts/${dict}" COPYONLY IMMEDIATE)
+ FILE(READ "${GDCM_SOURCE_DIR}/Dicts/${dict}" dict_append)
+ SET(TEST_DICT_BODY "${TEST_DICT_BODY}\n${dict_append}")
+ENDFOREACH(dict)
+CONFIGURE_FILE("${GDCM_SOURCE_DIR}/Dicts/gdcm.dic.in"
+ "${GDCM_BINARY_DIR}/Dicts/gdcm.dic" @ONLY IMMEDIATE)
-INSTALL_FILES(${GDCM_DATA_DIR} .dic
- dicomV3
- dicomVR
- dicomTS
- DicomDir
-)
-
+#-----------------------------------------------------------------------------
# Nice trick to avoid creating a .h file each time we compile gdcm
# Since CONFIGURE_FILE do a 'copy if different'
# We have to write the file here since is contains 'DICOM_DICTIONARY'
# Which is a variable afterward...
# Following code contributing by Andy Cedilnik (Kitware)
-FILE(READ "dicomV3.dic" ENT)
+FILE(READ "${GDCM_BINARY_DIR}/Dicts/gdcm.dic" ENT)
STRING(REGEX REPLACE "\r?\n" ";" ENT "${ENT}")
SET(DICOM_DATA_DICTIONARY "")
SET(DICOM_DATA_DICTIONARY "${DICOM_DATA_DICTIONARY} \n {0,0,0,0,0}")
+#-----------------------------------------------------------------------------
+# ... for DicomTS file
FILE(READ "dicomTS.dic" ENT_TS)
STRING(REGEX REPLACE "\r?\n" ";" ENT_TS "${ENT_TS}")
SET(DICOM_TS_DICTIONARY "")
SET(DICOM_TS_DICTIONARY "${DICOM_TS_DICTIONARY}\n${nline}")
ENDFOREACH(line)
+#-----------------------------------------------------------------------------
+# ... for DicomVR file
FILE(READ "dicomVR.dic" ENT_VR)
STRING(REGEX REPLACE ";" "/" ENT_VR "${ENT_VR}") # CMake doesn't like ';'
STRING(REGEX REPLACE "\r?\n" ";" ENT_VR "${ENT_VR}")
SET(DICOM_VR_DICTIONARY "${DICOM_VR_DICTIONARY}\n${nline}")
ENDFOREACH(line)
+#-----------------------------------------------------------------------------
+# ... for DictGroupName file
+FILE(READ "DictGroupName.dic" ENT_TS)
+STRING(REGEX REPLACE "\r?\n" ";" ENT_TS "${ENT_TS}")
+SET(DICT_GROUP_NAME_DICTIONARY "")
+
+FOREACH(line ${ENT_TS})
+ STRING(REGEX REPLACE
+ "^([0-9a-f]+) +(.*)$"
+ " groupName[0x\\1] = \\2; " nline "${line}")
+ SET(DICT_GROUP_NAME_DICTIONARY "${DICT_GROUP_NAME_DICTIONARY}\n${nline}")
+ENDFOREACH(line)
+
+#-----------------------------------------------------------------------------
+# ... for DicomDir file
FILE(READ "DicomDir.dic" ENT_DIR)
STRING(REGEX REPLACE "\\\\" "\\\\\\\\" ENT_DIR "${ENT_DIR}")
STRING(REGEX REPLACE ";" "/" ENT_DIR "${ENT_DIR}") # CMake doesn't like ';'
FOREACH(line ${ENT_DIR})
STRING(REGEX REPLACE
- "^(metaElem|patientElem|studyElem|serieElem|imageElem) *([a-f0-9]+) ([a-f0-9]+) [\"](.*)[\"](.*)$"
- " {\"\\1\" , 0x\\2 , 0x\\3 , \"\\4\"}, \\5" nline "${line}")
+ "^(metaElem|patientElem|studyElem|serieElem|imageElem) *([a-f0-9]+) ([a-f0-9]+) [\"](.*)[\"] [\"](.*)[\"] (.*)$"
+ " {\"\\1\" , 0x\\2 , 0x\\3 , \"\\4\", \"\\5\"}, \\6" nline "${line}")
SET(DICOM_DIR_DICTIONARY "${DICOM_DIR_DICTIONARY}\n${nline}")
ENDFOREACH(line)
-SET(DICOM_DIR_DICTIONARY "${DICOM_DIR_DICTIONARY} \n {0,0,0,0}")
-
-# See above
-FOREACH(file dicomV3.dic dicomTS.dic dicomVR.dic DicomDir.dic)
- CONFIGURE_FILE("${GDCM_SOURCE_DIR}/Dicts/${file}"
- "${GDCM_BINARY_DIR}/Dicts/${file}.out")
-ENDFOREACH(file)
-CONFIGURE_FILE("${GDCM_SOURCE_DIR}/src/gdcmDefaultDicts.cxx.in" "${GDCM_BINARY_DIR}/src/gdcmDefaultDicts.cxx" IMMEDIATE)
-
-
-#FILE(READ "dicomV3VM2004.dic" ENT2)
-#STRING(REGEX REPLACE "\n" ";" ENT2 "${ENT2}")
-#SET(DICOM_DICTIONARY2 "")
-#
-#FOREACH(line ${ENT2})
-# STRING(REGEX REPLACE
-## "^([0-9a-f][0-9a-f][0-9a-f][0-9a-f]) ([0-9a-f][0-9a-f][0-9a-f][0-9a-f]) ([A-Z]+) ([A-Z]+) (.*)([ \(RET\)]*)$"
-# "^([0-9a-f][0-9a-f][0-9a-f][0-9a-f]) ([0-9a-f][0-9a-f][0-9a-f][0-9a-f]) ([A-Z]+) ([0-9]|[1]-[0-9n]|[2]-[2][n]|[3]-[3][n]) (.*)$"
-## " { \\1, \\2, \"\\3\" , \"\\4\" , \"\\5\", \"\\6\"}," nline "${line}")
-# " { \\1, \\2, \"\\3\" , \"\\4\" , \"\\5\"}," nline "${line}")
-# SET(DICOM_DICTIONARY2 "${DICOM_DICTIONARY2}\n${nline}")
-#ENDFOREACH(line)
-#
-#
-#
-##FILE(READ "04_06PU.txt" ENT3)
-#FILE(READ "extract.txt" ENT3)
-#
-#STRING(REGEX REPLACE "\n" ";" ENT3 "${ENT3}")
-#SET(DICOM_DICTIONARY3 "")
-#
-#FOREACH(line ${ENT3})
-# STRING(REGEX REPLACE
-## "^[(]([0-9a-fA-F]+),([0-9a-fA-F]+)[)] (.*) ([A-ZA-Z]*) ([[0-3][-][1-3n]*|[1-]*[0-9]+]*) ?([RET|Retired]*)$"
-# "^[(]([0-9a-fA-F]+),([0-9a-fA-F]+)[)] +(.*) +([A-ZA-Z [[0-3][-][1-3n]*|[1-]*[0-9]+]]*)([ RET]*)$"
-# " { \\1 , \\2, \\3, \\4, \\5 }," nline "${line}")
-# STRING(COMPARE NOTEQUAL "${line}" "${nline}" add)
-# IF(add)
-# #SET(DICOM_DICTIONARY3 "${DICOM_DICTIONARY3}\n${nline}")
-# MESSAGE("${nline}")
-# ELSE(add)
-# MESSAGE("WRONG:${nline}")
-# ENDIF(add)
-#ENDFOREACH(line)
-
-
-# Txt generation:
-# ~/Software/xpdf-3.00-linux/pdftotext -f 9 -l 81 -raw -nopgbrk 04_06PU.PDF 04_06PU-3.txt
+#-----------------------------------------------------------------------------
+# ... Set the dictionnary
+SET(DICOM_DIR_DICTIONARY "${DICOM_DIR_DICTIONARY} \n {0,0,0,0,0}")
+
+CONFIGURE_FILE("${GDCM_SOURCE_DIR}/src/gdcmDefaultDicts.cxx.in"
+ "${GDCM_BINARY_DIR}/src/gdcmDefaultDicts.cxx" IMMEDIATE)
+
+#-----------------------------------------------------------------------------
+# For now GDCM_INSTALL_NO_DICTIONARY is a hidden variables
+IF(NOT GDCM_INSTALL_NO_DICTIONARY)
+ INSTALL_FILES(${GDCM_INSTALL_DATA_DIR} .dic
+ dicomV3
+ dicomVR
+ dicomTS
+ DicomDir
+ DictGroupName
+ gdcm
+ )
+ENDIF(NOT GDCM_INSTALL_NO_DICTIONARY)
+
git://git.creatis.insa-lyon.fr / gdcm.git / blobdiff