-#!/bin/sh
+#!/bin/bash
+ if [ ! -f $PWD/scripts/CreaTools-configure.sh ]
+ then
+ echo
+ echo "..ERROR.."
+ echo "==================================================="
+ echo "REMEMBER !"
+ echo ""
+ echo "YOU NEED TO RUN 'Configure' (0) First !"
+ echo "==================================================="
+ echo
+ echo
+ exit 0
+fi
+echo $loginGroupName
source $PWD/scripts/CreaTools-configure.sh
-echo "------"
-echo $PWD/scripts/CreaTools-configure.sh
-echo generationdir
-echo $generationdir
-echo docgeneration
-echo $docgeneration
-echo installPrefix
-echo $installPrefix
-echo buildType
-echo $buildType
-echo gdcmVersion
-echo $gdcmVersion
-echo sourcesFrom
-echo $sourcesFrom
-echo scriptDir
-echo $scriptDir
-echo start_point
-echo $start_point
-echo "------"
+ echo "------"
+ echo $PWD/scripts/CreaTools-configure.sh
+ echo --generationdir--
+ echo $generationdir
+ echo --corenumber--
+ echo $corenumber
+ echo --docgeneration--
+ echo $docgeneration
+ echo --installPrefix--
+ echo $installPrefix
+ echo --installPrefixThird--
+ echo $installPrefixThird
+ echo --buildType--
+ echo $buildType
+ echo --gdcmVersion--
+ echo $gdcmVersion
+# echo --sourcesFrom--
+# echo $sourcesFrom
+# echo --scriptDir--
+# echo $scriptDir
+# echo --start_point--
+# echo $start_point
+ echo "------"
+
scriptDir=$PWD
sourcesDir=$generationdir/thirdparty_sources
binDir=$generationdir/thirdparty_bin
-mkdir $generationdir
-mkdir $sourcesDir
-mkdir $binDir
-
-rm $installPrefix/share/creatools_third_party_library_config.sh
+if [ ! -e $generationdir ]
+then
+ mkdir $generationdir
+ chown $loginUserName $generationdir
+ chgrp $loginGroupName $generationdir
-# the following stupid test is used at debug time; Please don't remove!
-if [ true = true ]
+fi
+if [ ! -e $sourcesDir ]
then
+ mkdir $sourcesDir
+ #was : (pb on MacOS?)
+ #chown $loginUserName:$loginGroupName $sourcesDir
+ chown $loginUserName $sourcesDir
+ chgrp $loginGroupName $sourcesDir
+fi
- case "$OperatingSystem" in
- Fedora)
- yum install cmake -y
- yum install cmake-gui -y
- yum install doxygen -y
- yum install graphviz -y
- yum install texlive -y
- yum install latex2html -y
- yum install wxGTK-devel wxBase -y
- yum install boost-devel -y
- yum install sqlite-devel -y
- yum install qt-devel -y
- yum install mesa-libOSMesa-devel -y
- ;;
- Ubuntu)
- apt-get --yes install build-essential # esta linea instala las librerias necesarias para compilar en ubuntu, g++ gcc etc etc etc.
- apt-get --yes install cmake
- apt-get --yes install cmake-gui
- apt-get --yes install cmake-curses-gui
- apt-get --yes install doxygen
- apt-get --yes install graphviz
- apt-get --yes install texlive
- apt-get --yes install latex2html
- apt-get --yes install libgtk2.0-dev #GTK
- apt-get --yes install libwxgtk2.8-dev #Wx GTK
- apt-get --yes install libwxbase2.8-dev #Wx solito
- apt-get --yes install libboost-dev #Boost
- apt-get --yes install libboost-all-dev #Boost
- apt-get --yes install libqt4-dev #QT4
- apt-get --yes install sqlite
- apt-get --yes install libsqlite0-dev
- apt-get --yes install libosmesa6-dev #Mesa6
- apt-get --yes install uuid-dev # uuid para la instalacion de itk
- apt-get --yes install libxaw7-dev # X11
- ;;
- MacOS)
-# QUESTION : is -y mandatory?
-
- port install cmake -y
- port install cmake-gui -y
- port install doxygen -y
- port install graphviz -y
- port install texlive -y
- port install latex2html -y
- port install wxGTK-devel wxBase -y
- port install boost-devel -y
- port install sqlite-devel -y
- port install qt-devel -y
- port install mesa-libOSMesa-devel -y
- ;;
- *)
- #echo " '$OperatingSystem' : Unknown (for us...) Operating Sytem "
- echo " Allowed values are (right now) Fedora, Ubuntu, MacOS "
- exit 0
- ;;
- esac
+if [ ! -e $binDir ]
+then
+ mkdir $binDir
+ chown $loginUserName $binDir
+ chgrp $loginGroupName $binDir
fi
+# Third Party base stuff is now installed by ThirdParty-install-Base-Stuff.sh JPR
+
+
+
+
# the following stupid test is used at debug time; Please don't remove!
+#if [ true = false ]
if [ true = true ]
then
- rm -rf $sourcesDir/VTK*
- rm -rf $sourcesDir/vtk*
- rm -rf $sourcesDir/InsightToolkit*
- rm -rf $sourcesDir/gdcm*
- rm -rf $sourcesDir/tth*
- cd $sourcesDir
- wget http://www.creatis.insa-lyon.fr/software/public/creatools/crea_ThirdParty_Libraries/source/vtk-5.6.1.tar.gz
- wget http://www.creatis.insa-lyon.fr/software/public/creatools/crea_ThirdParty_Libraries/source/gdcm_08_Dic_2009.tar.gz
- wget http://www.creatis.insa-lyon.fr/software/public/creatools/crea_ThirdParty_Libraries/source/InsightToolkit-3.20.0.tar.gz
- wget http://www.creatis.insa-lyon.fr/software/public/creatools/crea_Developer_Tools/All_Versions/tth/tth_linux/tth
-
- tar -xvzf vtk-5.6.1.tar.gz
- tar -xvzf gdcm_08_Dic_2009.tar.gz
- tar -xvzf InsightToolkit-3.20.0.tar.gz
-fi
-
+ rm -rf $sourcesDir/tth*
-if [ $buildType = "Debug" ]
-then
-debug="ON"
-else
-debug="OFF"
-fi
+ cd $sourcesDir
+ if [ $OperatingSystem = "MacOS" ]
+ then
+ # curl -O http://www.creatis.insa-lyon.fr/software/public/creatools/crea_ThirdParty_Libraries/source/VTK-5.6.1.patchCreatis.tar.gz
+ # curl -O http://www.creatis.insa-lyon.fr/software/public/creatools/crea_ThirdParty_Libraries/source/gdcm_05_Mai_2011.tar.gz
+ # curl -O http://www.creatis.insa-lyon.fr/software/public/creatools/crea_ThirdParty_Libraries/source/InsightToolkit-3.20.0.tar.gz
+ curl -O http://www.creatis.insa-lyon.fr/software/public/creatools/crea_Developer_Tools/All_Versions/tth/tth_linux/tth
+ # MacOS, clever enough to understand it *has* to uncompress, doesn't understand tar -z :-(
+ # tar -xvf VTK-5.6.1.patchCreatis.tar.gz
+ # tar -xvf gdcm_05_Mai_2011.tar.gz
+ # tar -xvf InsightToolkit-3.20.0.tar.gz
+ else
+ # wget http://www.creatis.insa-lyon.fr/software/public/creatools/crea_ThirdParty_Libraries/source/VTK-5.6.1.patchCreatis.tar.gz
+ # wget http://www.creatis.insa-lyon.fr/software/public/creatools/crea_ThirdParty_Libraries/source/gdcm_05_Mai_2011.tar.gz
+ # wget http://www.creatis.insa-lyon.fr/software/public/creatools/crea_ThirdParty_Libraries/source/InsightToolkit-3.20.0.tar.gz
+ wget http://www.creatis.insa-lyon.fr/software/public/creatools/crea_Developer_Tools/All_Versions/tth/tth_linux/tth
+
+ # tar -xvzf VTK-5.6.1.patchCreatis.tar.gz
+ #tar -xvzf gdcm_05_Mai_2011.tar.gz
+ #tar -xvzf InsightToolkit-3.20.0.tar.gz
+ fi
-if [ true = true ]
-then
- libname=VTK
- dirInstall=$binDir/$libname-Bin
- dirInstallVTK=$dirInstall
- VTK_DIR=$installPrefix/lib/vtk-5.6/
- cd $dirInstall
- cmake -G"Unix Makefiles" -H$sourcesDir/$libname -B$dirInstall/
- ##cmake -G"CodeBlocks - Unix Makefiles" -H$sourcesDir/$libname -B$dirInstall/
- cmake -D USE_DEBUG_LIB:BOOL=$buildType -D CMAKE_INSTALL_PREFIX:PATH=$installPrefix CMakeCache.txt
- cmake -D BUILD_EXAMPLES:BOOL=OFF -D BUILD_TESTING:BOOL=OFF -D BUILD_SHARED_LIBS:BOOL=ON -D VTK_USE_QT:BOOL=ON CMakeCache.txt
- make -j 2
- make install
- cd ..
fi
-if [ true = true ]
-then
- libname=gdcm
- dirInstall=$binDir/$libname-Bin
- GDCM_DIR=$installPrefix/lib/gdcm/
- mkdir $dirInstall
- cd $dirInstall
- cmake -G"Unix Makefiles" -H$sourcesDir/$libname -B$dirInstall/
- ##cmake -G"CodeBlocks - Unix Makefiles" -H$sourcesDir/$libname -B$dirInstall/
- cmake -D USE_DEBUG_LIB:BOOL=$buildType -D CMAKE_INSTALL_PREFIX:PATH=$installPrefix CMakeCache.txt
- cmake -D VTK_DIR:PATH=$dirInstallVTK CMakeCache.txt
- cmake -D GDCM_VTK:BOOL=ON -D GDCM_NAME_SPACE:STRING=gdcm13 CMakeCache.txt
- make -j 2
- make install
- cd ..
-fi
-if [ true = true ]
+if [ $buildType = "Debug" ]
then
- libname=InsightToolkit-3.20.0
- dirInstall=$binDir/$libname-Bin
- ITK_DIR=$installPrefix/lib/InsightToolkit/
- mkdir $dirInstall
- cd $dirInstall
- cmake -G"Unix Makefiles" -H$sourcesDir/$libname -B$dirInstall/
- ##cmake -G"CodeBlocks - Unix Makefiles" -H$sourcesDir/$libname -B$dirInstall/
- cmake -D USE_DEBUG_LIB:BOOL=$buildType -D CMAKE_INSTALL_PREFIX:PATH=$installPrefix CMakeCache.txt
- cmake -D BUILD_EXAMPLES:BOOL=OFF -D BUILD_TESTING:BOOL=OFF -D BUILD_SHARED_LIBS:BOOL=ON -D ITK_USE_REVIEW:BOOL=ON CMakeCache.txt
- cmake CMakeCache.txt
- make -j 2
- make install
- cd ..
+ debug="ON"
+else
+ debug="OFF"
fi
+#if [ true = false ]
if [ true = true ]
then
cd $sourcesDir
- cp tth $installPrefix/bin
+ # pourquoi ne copie-t-on plus? JPR
+ cp tth $installPrefixThird/bin
fi
-
-#deal with create creatools_third_party_libraries_config.sh
-
-touch $installPrefix/share/creatools_third_party_library_config.sh
-chmod 755 $installPrefix/share/creatools_third_party_library_config.sh
-
-echo export PATH='$'PATH:$installPrefix/bin >> $installPrefix/share/creatools_third_party_library_config.sh
-echo export VTK_DIR=$installPrefix/lib/vtk-5.6 >> $installPrefix/share/creatools_third_party_library_config.sh
-echo export ITK_DIR=$installPrefix/lib/InsightToolkit >> $installPrefix/share/creatools_third_party_library_config.sh
-echo export GDCM_DIR=$installPrefix/lib/gdcm >> $installPrefix/share/creatools_third_party_library_config.sh
-echo export TTH=$installPrefix/bin/tth >> $installPrefix/share/creatools_third_party_library_config.sh
-echo export LD_LIBRARY_PATH='$'LD_LIBRARY_PATH:$GDCM_DIR >> $installPrefix/share/creatools_third_party_library_config.sh
-echo export LD_LIBRARY_PATH='$'LD_LIBRARY_PATH:$ITK_DIR >> $installPrefix/share/creatools_third_party_library_config.sh
-echo export LD_LIBRARY_PATH='$'LD_LIBRARY_PATH:$VTK_DIR >> $installPrefix/share/creatools_third_party_library_config.sh
-
-# modify .bashrc
-# - remove line 'sh $installPrefix/share/creatools_third_party_library_config.sh' if any (with accurate value for ???)
-sed -i -e '/.*creatools_third_party_library_config.*/ d' /etc/bashrc
-
-# - add line 'sh $installPrefix/share/creatools_third_party_library_config.sh' (with accurate value for ???)
-echo source $installPrefix/share/creatools_third_party_library_config.sh >> /etc/bashrc
-
-