INCLUDE_DIRECTORIES(
${GDCM_SOURCE_DIR}/src
+ ${GDCM_SOURCE_DIR}/gdcmPython
${PYTHON_INCLUDE_PATH}
${GDCM_BINARY_DIR}/
)
# CMake 2.0 will fully support Swig wrapping so split based on cmake version:
-IF(${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION} GREATER 1.9)
+# We need to pass that to swig to be sure all modules are generated in the proper dir
+SET(CMAKE_SWIG_FLAGS "-outdir \"${GDCM_BINARY_DIR}/gdcmPython\"")
+#SET(CMAKE_SWIG_OUTDIR "${GDCM_BINARY_DIR}/gdcmPython")
+# Looks like a bug to me in cmake 2.0.x:
+SEPARATE_ARGUMENTS(CMAKE_SWIG_FLAGS)
- # We need to pass that to swig to be sure all modules are generated in the proper dir
- SET(CMAKE_SWIG_FLAGS "-outdir ${GDCM_BINARY_DIR}/gdcmPython")
- # Looks like a bug to me in cmake 2.0.x:
- SEPARATE_ARGUMENTS(CMAKE_SWIG_FLAGS)
-
- FIND_PACKAGE(SWIG REQUIRED)
+FIND_PACKAGE(SWIG REQUIRED)
+IF(SWIG_FOUND)
INCLUDE(${SWIG_USE_FILE})
-
- #SET_SOURCE_FILES_PROPERTIES(gdcm.i PROPERTIES PYTHON ON)
- SET_SOURCE_FILES_PROPERTIES(gdcm.i PROPERTIES CPLUSPLUS ON)
- # Setting SWIG_FLAGS to "-includeall" at the following line looks like
- # a bad idea since swig tries to recursively include all the referenced
- # files, "including" the C++ <sstream>, <list>, <map>... Of course swig
- # has no way of finding the path to those files (unless it is told by
- # cmake) since they are related to the compiler installation layout.
- # Anyhow, since this inclusion recursion is not necessary, just don't
- # do it.
- # Note: apparently the line is required in order to avoid a NOTFOUND
- # as argument of swig on invocation of make.
- SET_SOURCE_FILES_PROPERTIES(gdcm.i PROPERTIES SWIG_FLAGS "")
- SWIG_ADD_MODULE(gdcm python gdcm.i) #gdcm_wrap.cxx
- SWIG_LINK_LIBRARIES(gdcm gdcm ${PYTHON_LIBRARIES})
-
- SET(GDCM_CXX_FLAGS ${CMAKE_SWIG_FLAGS})
- # Get rid of -Wall / -W / -pedantic if exist
- SET(CMAKE_CXX_FLAGS "")
- # I guess I need to put them back on the this file:
- SET_SOURCE_FILES_PROPERTIES(${GDCM_BINARY_DIR}/gdcmPython/gdcm_wrap.cxx
- PROPERTIES COMPILE_FLAGS "")
-# SET_TARGET_PROPERTIES(${GDCM_BINARY_DIR}/gdcmPython/gdcm_wrap.cxx
-# PROPERTIES CMAKE_CXX_FLAGS "-foo")
-
-ELSE(${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION} GREATER 1.9)
-
- # As of 09/10/2003 there was no FindSWIG.cmake
- # later we should use SWIG instead of swig
- FIND_PROGRAM(SWIG_EXECUTABLE
- NAMES swig-1.3 swig
- )
-
- IF(NOT SWIG_EXECUTABLE)
- MESSAGE(FATAL_ERROR "Swig could not be found wrapping is impossible")
- ENDIF(NOT SWIG_EXECUTABLE)
-
- # Build our custom command :
- ADD_CUSTOM_COMMAND(
- OUTPUT ${GDCM_BINARY_DIR}/gdcmPython/gdcm_wrap.cxx
- COMMAND ${SWIG_EXECUTABLE}
- ARGS -python -c++ -I${GDCM_SOURCE_DIR}/src -o
- ${GDCM_BINARY_DIR}/gdcmPython/gdcm_wrap.cxx
- ${GDCM_SOURCE_DIR}/gdcmPython/gdcm.i
- DEPENDS ${GDCM_SOURCE_DIR}/gdcmPython/gdcm.i
- COMMENT "Generating gdcm_wrap.cxx/gdcm.py based on gdcm.i"
- )
- # Since the file gdcm_wrap.cxx does not exist, mark it as GENERATED:
- SET_SOURCE_FILES_PROPERTIES(${GDCM_BINARY_DIR}/gdcmPython/gdcm_wrap.cxx GENERATED)
-
- ADD_LIBRARY(pygdcm gdcm_wrap.cxx)
- TARGET_LINK_LIBRARIES(pygdcm
- ${PYTHON_LIBRARY}
- gdcm
- )
- # http://www.cmake.org/pipermail/cmake/2003-August/004190.html
- #SET_TARGET_PROPERTIES(pygdcm PROPERTIES PREFIX "_")
-
- # This swig command will also outputs gdcm.py :
- SET_SOURCE_FILES_PROPERTIES(${GDCM_BINARY_DIR}/gdcmPython/gdcm.py GENERATED)
-
- # Instead of a simple copy operation let create our own gdcm.py file:
- # First read what swig dumped:
- IF(EXISTS ${GDCM_BINARY_DIR}/gdcmPython/gdcm.py)
- FILE(READ ${GDCM_BINARY_DIR}/gdcmPython/gdcm.py SWIG_GDCM_PY)
- ENDIF(EXISTS ${GDCM_BINARY_DIR}/gdcmPython/gdcm.py)
-
- # Then create the gdcm.py = gdcmVersion.py + gdcm.py (swig) file:
- FILE(WRITE ${GDCM_BINARY_DIR}/bin/gdcmVersion.py
- "import os\n"
- "gdcmVERSION=\"${GDCM_VERSION}\"\n"
- "GDCM_DATA_PATH=\"${GDCM_DATA_ROOT}\"\n\n"
- ${SWIG_GDCM_PY}
- )
-
- # Seems like they want instead a file called gdcmPython.py
- # Thus add the custom command to copy it to proper location:
-# ADD_CUSTOM_COMMAND(
-# TARGET pygdcm
-# POST_BUILD
-# COMMAND ${CMAKE_COMMAND}
-# ARGS -E copy
-# ${GDCM_BINARY_DIR}/bin/gdcm.py
-# ${GDCM_BINARY_DIR}/bin/gdcmPython.py
-# )
-
- # Here comes the hack to rename the library to a more 'swig' compliant scheme"
- SET(LIB_NAME ${CMAKE_SHARED_LIBRARY_PREFIX}pygdcm${CMAKE_SHARED_LIBRARY_SUFFIX})
- SET(EXE_DIR ${GDCM_BINARY_DIR}/Executable)
- IF(EXECUTABLE_OUTPUT_PATH)
- SET(EXE_DIR ${EXECUTABLE_OUTPUT_PATH})
- ENDIF(EXECUTABLE_OUTPUT_PATH)
- SET(LIB_DIR ${GDCM_BINARY_DIR}/Library/Shared)
- IF(LIBRARY_OUTPUT_PATH)
- SET(LIB_DIR ${LIBRARY_OUTPUT_PATH})
- ENDIF(LIBRARY_OUTPUT_PATH)
-
- IF(WIN32 OR APPLE)
- SET(SHARED_MUST_BE_IN_EXE_DIR 1)
- ENDIF(WIN32 OR APPLE)
-
- IF(NOT SHARED_MUST_BE_IN_EXE_DIR)
- SET(EXE_DIR ${LIB_DIR})
- ENDIF(NOT SHARED_MUST_BE_IN_EXE_DIR)
-
- ADD_CUSTOM_COMMAND(
- TARGET pygdcm
- POST_BUILD
- COMMAND ${CMAKE_COMMAND} ARGS -E copy
- ${LIB_DIR}/${CMAKE_CFG_INTDIR}/${LIB_NAME}
- ${EXE_DIR}/${CMAKE_CFG_INTDIR}/_gdcm${CMAKE_SHARED_LIBRARY_SUFFIX}
- )
-
-ENDIF(${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION} GREATER 1.9)
-
+ENDIF(SWIG_FOUND)
+
+
+SET_SOURCE_FILES_PROPERTIES(gdcm.i PROPERTIES CPLUSPLUS ON)
+# BUG: This is only needed with cmake <= 2.0.5
+SET_SOURCE_FILES_PROPERTIES(gdcm.i PROPERTIES SWIG_FLAGS "")
+# END OF BUG
+#FIXME :
+#where must we put the keyword SHARED
+#- just like in ADD_LIBRARY(vtkgdcmPython SHARED ${gdcmWrapSOURCES}) -
+#to allow use of a static/shared libray ?
+# JPRx
+SWIG_ADD_MODULE(gdcm python gdcm.i) #gdcm_wrap.cxx, or gdcmPYTHON_wrap.cxx
+SWIG_LINK_LIBRARIES(gdcm gdcm ${PYTHON_LIBRARIES})
+
+# Get rid of -Wall / -W / -pedantic if exist
+SET(CMAKE_CXX_FLAGS "")
+# I guess I need to put them back on this file:
+#SET_SOURCE_FILES_PROPERTIES(
+# ${swig_generated_file_fullname}
+# PROPERTIES COMPILE_FLAGS "")
+
+INSTALL_TARGETS(/lib/gdcm/ _gdcm)
#-----------------------------------------------------------------------------
# VTK Wrapping
IF(NOT VTK_WRAP_PYTHON)
MESSAGE(FATAL_ERROR "Can't build gdcm python wrapping if VTK_WRAP_PYTHON is OFF" )
ENDIF(NOT VTK_WRAP_PYTHON)
+ IF("${VTK_MAJOR_VERSION}" GREATER 4)
+ INCLUDE(${VTK_CMAKE_DIR}/vtkWrapPython.cmake)
+ ENDIF("${VTK_MAJOR_VERSION}" GREATER 4)
VTK_WRAP_PYTHON2(vtkgdcmPython gdcmWrapSOURCES
${vtkgdcmPython_la_SOURCES})
# The C++ files must be made into a C++ library
- ADD_LIBRARY(vtkgdcmPython SHARED ${gdcmWrapSOURCES}) #MODULE on apple ?
+ ADD_LIBRARY(vtkgdcmPython MODULE ${gdcmWrapSOURCES}) #MODULE on apple ?
+
+ # Python extension modules on Windows must have the extension ".pyd"
+ # instead of ".dll" as of Python 2.5. Older python versions do support
+ # this suffix.
+ IF(WIN32 AND NOT CYGWIN)
+ SET_TARGET_PROPERTIES(vtkgdcmPython PROPERTIES SUFFIX ".pyd")
+ ENDIF(WIN32 AND NOT CYGWIN)
+
# set the libraries to link against
#SET_TARGET_PROPERTIES(${foobar} PROPERTIES PREFIX "")
#GET_TARGET_PROPERTY(swig_gdcm_fullpath "${SWIG_MODULE_gdcm_REAL_NAME}" LOCATION)
- TARGET_LINK_LIBRARIES (vtkgdcmPython
- vtkgdcm
- vtkCommonPython
- vtkIOPython)
+ IF("${VTK_MAJOR_VERSION}" LESS 5)
+ TARGET_LINK_LIBRARIES (vtkgdcmPython
+ vtkgdcm
+ vtkCommonPython
+ vtkIOPython)
+ ELSE("${VTK_MAJOR_VERSION}" LESS 5)
+ TARGET_LINK_LIBRARIES (vtkgdcmPython
+ vtkgdcm
+ vtkCommonPythonD
+ vtkIOPythonD)
+ ENDIF("${VTK_MAJOR_VERSION}" LESS 5)
+ INSTALL_TARGETS(/lib/gdcm/ vtkgdcmPython)
+
ENDIF (GDCM_WRAP_PYTHON)
ENDIF(GDCM_VTK)
#)
#-----------------------------------------------------------------------------
-# Install stuff:
-
-# Cmake cannot handle installing since python wants stuff to be installed
-# in /usr/lib/pythonx.x/site-package and not a a std /usr/lib
-# Thus generate a setup.py file using distutils
-
-# Create a gdcm.pth file:
-
+# Python package configuration
FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/gdcmVersion.py
"gdcmVERSION=\"${GDCM_VERSION}\"\n"
)
-FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/gdcm.pth
- "gdcmPython\n"
- )
-
FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/__init__.py
"__all__ = [\"core\",\n"
" \"vtk\",\n"
)
FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/core.py
+ "from gdcmVersion import *\n"
"import gdcm\n"
- "GDCM_DATA_ROOT =\"${GDCM_DATA_ROOT}\"\n"
+ "GDCM_DATA_ROOT = \"${GDCM_DATA_ROOT}\"\n"
)
IF(GDCM_VTK)
FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/vtk.py
"import os\n"
+ "from gdcmVersion import *\n"
"if os.name == 'posix':\n"
" from libvtkgdcmPython import *\n"
"else:\n"
" from vtkgdcmPython import *\n"
- "GDCM_DATA_ROOT =\"${GDCM_DATA_ROOT}\"\n"
+ "GDCM_DATA_ROOT = \"${GDCM_DATA_ROOT}\"\n"
)
ENDIF(GDCM_VTK)
+#-----------------------------------------------------------------------------
+# Python installation
+IF(WIN32)
+ FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/gdcmPython.pth
+ "${GDCM_BINARY_DIR}\n"
+ "${GDCM_BINARY_DIR}/bin/release\n"
+ )
+ FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/InstallOnly/gdcmPython.pth
+ "${GDCM_SOURCE_DIR}\n"
+ "${GDCM_SOURCE_DIR}/bin\n"
+ )
+ELSE(WIN32)
+ FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/gdcmPython.pth
+ "${CMAKE_INSTALL_PREFIX}/lib/gdcm\n"
+ )
+ FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/InstallOnly/gdcmPython.pth
+ "/usr/lib/gdcm\n"
+ )
+ENDIF(WIN32)
+
+# Install a python path file in site-packages that tells
+# python where to find the gdcmPython module
+IF(UNIX)
+ FIND_PATH(PYTHON_DIR "site-packages"
+ /usr/lib/python2.5
+ /usr/lib/python2.4
+ /usr/lib/python2.3
+ /usr/lib/python2.2
+ /usr/lib/python2.1
+ )
+ STRING(REGEX REPLACE "/usr" "" PYTHON_DIR ${PYTHON_DIR})
+
+ INSTALL_FILES(${PYTHON_DIR}/site-packages FILES
+ "${GDCM_BINARY_DIR}/gdcmPython/InstallOnly/gdcmPython.pth"
+ )
+ INSTALL_FILES(/lib/gdcm/gdcmPython FILES
+ "gdcm.py"
+ "__init__.py"
+ "gdcmVersion.py"
+ "core.py"
+ "vtk.py"
+ )
+ENDIF(UNIX)
+
#-----------------------------------------------------------------------------
# Add test from demo subdir:
git://git.creatis.insa-lyon.fr / gdcm.git / blobdiff