-# TODO
-# http://www.cmake.org/pipermail/cmake/2003-August/004185.html
-# http://www.cmake.org/pipermail/cmake/2003-January/001092.html
+# gdcm Python wrapping stuff:
INCLUDE_DIRECTORIES(
${GDCM_SOURCE_DIR}/src
+ ${GDCM_SOURCE_DIR}/gdcmPython
${PYTHON_INCLUDE_PATH}
${GDCM_BINARY_DIR}/
)
# SWIG Wrapping
#
-# Since the file gdcm_wrap.cxx does not exist, mark it as GENERATED:
-SET_SOURCE_FILES_PROPERTIES(gdcm_wrap.cxx GENERATED)
-ADD_LIBRARY(pygdcm gdcm_wrap.cxx)
+# CMake 2.0 will fully support Swig wrapping so split based on cmake version:
-TARGET_LINK_LIBRARIES(pygdcm
- ${PYTHON_LIBRARY}
- gdcm
-)
-# http://www.cmake.org/pipermail/cmake/2003-August/004190.html
-# SET_TARGET_PROPERTIES(pygdcm PROPERTIES PREFIX "_")
+# We need to pass that to swig to be sure all modules are generated in the proper dir
+SET(CMAKE_SWIG_FLAGS "-outdir \"${GDCM_BINARY_DIR}/gdcmPython\"")
+#SET(CMAKE_SWIG_OUTDIR "${GDCM_BINARY_DIR}/gdcmPython")
+# Looks like a bug to me in cmake 2.0.x:
+SEPARATE_ARGUMENTS(CMAKE_SWIG_FLAGS)
-#-----------------------------------------------------------------------------
-# SWIG Wrapping
-#
+FIND_PACKAGE(SWIG REQUIRED)
+IF(SWIG_FOUND)
+ INCLUDE(${SWIG_USE_FILE})
+ENDIF(SWIG_FOUND)
-# As of 09/10/2003 there was no FindSWIG.cmake
-# later we should use SWIG instead of swig
-# Build our custom command :
-ADD_CUSTOM_COMMAND(
- TARGET pygdcm
- COMMAND swig
- ARGS -python -c++ -I${GDCM_SOURCE_DIR}/src -o
- ${GDCM_BINARY_DIR}/gdcmPython/gdcm_wrap.cxx
- ${GDCM_SOURCE_DIR}/gdcmPython/gdcm.i
- SOURCE ${GDCM_SOURCE_DIR}/gdcmPython/gdcm.i
- OUTPUTS ${GDCM_BINARY_DIR}/gdcmPython/gdcm_wrap.cxx
- COMMENT "Generating gdcm_wrap.cxx/gdcm.py based on gdcm.i"
-)
-# This swig command will also outputs gdcm.py :
-SET_SOURCE_FILES_PROPERTIES(gdcm.py GENERATED)
+SET_SOURCE_FILES_PROPERTIES(gdcm.i PROPERTIES CPLUSPLUS ON)
+# BUG: This is only needed with cmake <= 2.0.5
+SET_SOURCE_FILES_PROPERTIES(gdcm.i PROPERTIES SWIG_FLAGS "")
+# END OF BUG
+#FIXME :
+#where must we put the keyword SHARED
+#- just like in ADD_LIBRARY(vtkgdcmPython SHARED ${gdcmWrapSOURCES}) -
+#to allow use of a static/shared libray ?
+# JPRx
+SWIG_ADD_MODULE(gdcm python gdcm.i) #gdcm_wrap.cxx, or gdcmPYTHON_wrap.cxx
+SWIG_LINK_LIBRARIES(gdcm gdcm ${PYTHON_LIBRARIES})
+
+# Get rid of -Wall / -W / -pedantic if exist
+SET(CMAKE_CXX_FLAGS "")
+# I guess I need to put them back on this file:
+#SET_SOURCE_FILES_PROPERTIES(
+# ${swig_generated_file_fullname}
+# PROPERTIES COMPILE_FLAGS "")
+
+INSTALL_TARGETS(/lib/gdcm/ _gdcm)
#-----------------------------------------------------------------------------
# VTK Wrapping
#
IF(GDCM_VTK)
+ # Include the VTK library
+ INCLUDE(${VTK_USE_FILE})
+
INCLUDE_DIRECTORIES(
${GDCM_SOURCE_DIR}/vtk
)
SET(vtkgdcmPython_la_SOURCES
${GDCM_SOURCE_DIR}/vtk/vtkGdcmReader.cxx
+ ${GDCM_SOURCE_DIR}/vtk/vtkGdcmWriter.cxx
)
SET_SOURCE_FILES_PROPERTIES(vtkGdcmReaderPython.cxx GENERATED)
# Configure Python module, which is the plugin itself
IF (GDCM_WRAP_PYTHON)
- VTK_WRAP_PYTHON2(vtkgdcmPython gdcmfoo
+ IF(NOT VTK_WRAP_PYTHON)
+ MESSAGE(FATAL_ERROR "Can't build gdcm python wrapping if VTK_WRAP_PYTHON is OFF" )
+ ENDIF(NOT VTK_WRAP_PYTHON)
+ IF("${VTK_MAJOR_VERSION}" GREATER 4)
+ INCLUDE(${VTK_CMAKE_DIR}/vtkWrapPython.cmake)
+ ENDIF("${VTK_MAJOR_VERSION}" GREATER 4)
+ VTK_WRAP_PYTHON2(vtkgdcmPython gdcmWrapSOURCES
${vtkgdcmPython_la_SOURCES})
# The C++ files must be made into a C++ library
- ADD_LIBRARY(vtkgdcmPython SHARED ${gdcmfoo})
+ ADD_LIBRARY(vtkgdcmPython MODULE ${gdcmWrapSOURCES}) #MODULE on apple ?
+
+ # Python extension modules on Windows must have the extension ".pyd"
+ # instead of ".dll" as of Python 2.5. Older python versions do support
+ # this suffix.
+ IF(WIN32 AND NOT CYGWIN)
+ SET_TARGET_PROPERTIES(vtkgdcmPython PROPERTIES SUFFIX ".pyd")
+ ENDIF(WIN32 AND NOT CYGWIN)
+
# set the libraries to link against
- TARGET_LINK_LIBRARIES (vtkgdcmPython
- pygdcm
- vtkgdcm
- vtkCommonPython
- vtkIOPython)
+ #SET_TARGET_PROPERTIES(${foobar} PROPERTIES PREFIX "")
+
+ #GET_TARGET_PROPERTY(swig_gdcm_fullpath "${SWIG_MODULE_gdcm_REAL_NAME}" LOCATION)
+ IF("${VTK_MAJOR_VERSION}" LESS 5)
+ TARGET_LINK_LIBRARIES (vtkgdcmPython
+ vtkgdcm
+ vtkCommonPython
+ vtkIOPython)
+ ELSE("${VTK_MAJOR_VERSION}" LESS 5)
+ TARGET_LINK_LIBRARIES (vtkgdcmPython
+ vtkgdcm
+ vtkCommonPythonD
+ vtkIOPythonD)
+ ENDIF("${VTK_MAJOR_VERSION}" LESS 5)
+ INSTALL_TARGETS(/lib/gdcm/ vtkgdcmPython)
+
ENDIF (GDCM_WRAP_PYTHON)
-
- #generate a setup.py according to VTK installation
- #put it in subdir in order to not override old one
- # as it is a pain...override existing file...
-
- GET_FILENAME_COMPONENT(VTKPATH ${VTK_DIR}/../../ ABSOLUTE)
- CONFIGURE_FILE(
- ${GDCM_SOURCE_DIR}/gdcmPython/setup.py.in
- ${GDCM_BINARY_DIR}/setup.py
- )
- #MESSAGE(STATUS ${VTKPATH})
ENDIF(GDCM_VTK)
+# generate a setup.py according to VTK installation
+# put it in subdir in order to not override old one
+#
+#GET_FILENAME_COMPONENT(VTKPATH ${VTK_DIR}/../../ ABSOLUTE)
+#CONFIGURE_FILE(
+# ${GDCM_SOURCE_DIR}/gdcmPython/setup.py.in
+# ${GDCM_BINARY_DIR}/setup.py
+#)
+
#-----------------------------------------------------------------------------
-# Install stuff:
-
-#Should install in path of PYTHON_LIBRARY and not the default CMAKE_INSTALL_PREFIX
-
-GET_FILENAME_COMPONENT(PYTHON_LIB_INSTALL ${PYTHON_LIBRARY} PATH)
-GET_FILENAME_COMPONENT(SITEPACKAGE
- ${PYTHON_LIB_INSTALL}/../site-packages ABSOLUTE)
-#MESSAGE(STATUS ${SITEPACKAGE})
-#INSTALL_FILES(/include "\\.h$")
-#INSTALL_TARGETS(/lib/ gdcm)
-
-# gdcm.py is a file generated by swig
-# then from python you can do import gdcm, and it will load _gdcm.so
-#INSTALL_TARGETS(/lib/ gdcm.py)
-#INSTALL_PROGRAMS(/lib/ gdcm.py)
-#INSTALL_FILES(/lib/ .py gdcm.py)
-
-# When installing swig-generated python module one should pay attention
-# to library naming convention, see here for more detail:
-# http://www.swig.org/Doc1.3/Python.html#n6
-# even with the $swig -module mylib, there is always a trailing underscore added
+# Python package configuration
+FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/gdcmVersion.py
+ "gdcmVERSION=\"${GDCM_VERSION}\"\n"
+ )
+
+FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/__init__.py
+ "__all__ = [\"core\",\n"
+ " \"vtk\",\n"
+ " ]\n"
+ )
+
+FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/core.py
+ "from gdcmVersion import *\n"
+ "import gdcm\n"
+ "GDCM_DATA_ROOT = \"${GDCM_DATA_ROOT}\"\n"
+ )
+
+IF(GDCM_VTK)
+ FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/vtk.py
+ "import os\n"
+ "from gdcmVersion import *\n"
+ "if os.name == 'posix':\n"
+ " from libvtkgdcmPython import *\n"
+ "else:\n"
+ " from vtkgdcmPython import *\n"
+ "GDCM_DATA_ROOT = \"${GDCM_DATA_ROOT}\"\n"
+ )
+ENDIF(GDCM_VTK)
+
+#-----------------------------------------------------------------------------
+# Python installation
+IF(WIN32)
+ FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/gdcmPython.pth
+ "${GDCM_BINARY_DIR}\n"
+ "${GDCM_BINARY_DIR}/bin/release\n"
+ )
+ FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/InstallOnly/gdcmPython.pth
+ "${GDCM_SOURCE_DIR}\n"
+ "${GDCM_SOURCE_DIR}/bin\n"
+ )
+ELSE(WIN32)
+ FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/gdcmPython.pth
+ "${CMAKE_INSTALL_PREFIX}/lib/gdcm\n"
+ )
+ FILE(WRITE ${GDCM_BINARY_DIR}/gdcmPython/InstallOnly/gdcmPython.pth
+ "/usr/lib/gdcm\n"
+ )
+ENDIF(WIN32)
+
+# Install a python path file in site-packages that tells
+# python where to find the gdcmPython module
+IF(UNIX)
+ FIND_PATH(PYTHON_DIR "site-packages"
+ /usr/lib/python2.5
+ /usr/lib/python2.4
+ /usr/lib/python2.3
+ /usr/lib/python2.2
+ /usr/lib/python2.1
+ )
+ STRING(REGEX REPLACE "/usr" "" PYTHON_DIR ${PYTHON_DIR})
+
+ INSTALL_FILES(${PYTHON_DIR}/site-packages FILES
+ "${GDCM_BINARY_DIR}/gdcmPython/InstallOnly/gdcmPython.pth"
+ )
+ INSTALL_FILES(/lib/gdcm/gdcmPython FILES
+ "gdcm.py"
+ "__init__.py"
+ "gdcmVersion.py"
+ "core.py"
+ "vtk.py"
+ )
+ENDIF(UNIX)
+
+#-----------------------------------------------------------------------------
+# Add test from demo subdir:
+
+SUBDIRS(demo)
git://git.creatis.insa-lyon.fr / gdcm.git / blobdiff