-/*=========================================================================
-Program: bbtk
-Module: $RCSfile$
-Language: C++
-Date: $Date$
-Version: $Revision$
-=========================================================================*/
+/*
+# ---------------------------------------------------------------------
+#
+# Copyright (c) CREATIS (Centre de Recherche en Acquisition et Traitement de l'Image
+# pour la Santé)
+# Authors : Eduardo Davila, Frederic Cervenansky, Claire Mouton
+#
+# This software is governed by the CeCILL-B license under French law and
+# abiding by the rules of distribution of free software. You can use,
+# modify and/ or redistribute the software under the terms of the CeCILL-B
+# license as circulated by CEA, CNRS and INRIA at the following URL
+# http://www.cecill.info/licences/Licence_CeCILL-B_V1-en.html
+# or in the file LICENSE.txt.
+#
+# As a counterpart to the access to the source code and rights to copy,
+# modify and redistribute granted by the license, users are provided only
+# with a limited warranty and the software's author, the holder of the
+# economic rights, and the successive licensors have only limited
+# liability.
+#
+# The fact that you are presently reading this means that you have had
+# knowledge of the CeCILL-B license and that you accept its terms.
+# ------------------------------------------------------------------------
+*/
+
+/*=========================================================================
+ Program: bbtk
+ Module: $RCSfile$
+ Language: C++
+ Date: $Date$
+ Version: $Revision$
+ =========================================================================*/
/* ---------------------------------------------------------------------
-* Copyright (c) CREATIS-LRMN (Centre de Recherche en Imagerie Medicale)
-* Authors : Eduardo Davila, Laurent Guigues, Jean-Pierre Roux
-*
-* This software is governed by the CeCILL-B license under French law and
-* abiding by the rules of distribution of free software. You can use,
-* modify and/ or redistribute the software under the terms of the CeCILL-B
-* license as circulated by CEA, CNRS and INRIA at the following URL
-* http://www.cecill.info/licences/Licence_CeCILL-B_V1-en.html
-* or in the file LICENSE.txt.
-*
-* As a counterpart to the access to the source code and rights to copy,
-* modify and redistribute granted by the license, users are provided only
-* with a limited warranty and the software's author, the holder of the
-* economic rights, and the successive licensors have only limited
-* liability.
-*
-* The fact that you are presently reading this means that you have had
-* knowledge of the CeCILL-B license and that you accept its terms.
-* ------------------------------------------------------------------------ */
+ * Copyright (c) CREATIS-LRMN (Centre de Recherche en Imagerie Medicale)
+ * Authors : Eduardo Davila, Laurent Guigues, Jean-Pierre Roux
+ *
+ * This software is governed by the CeCILL-B license under French law and
+ * abiding by the rules of distribution of free software. You can use,
+ * modify and/ or redistribute the software under the terms of the CeCILL-B
+ * license as circulated by CEA, CNRS and INRIA at the following URL
+ * http://www.cecill.info/licences/Licence_CeCILL-B_V1-en.html
+ * or in the file LICENSE.txt.
+ *
+ * As a counterpart to the access to the source code and rights to copy,
+ * modify and redistribute granted by the license, users are provided only
+ * with a limited warranty and the software's author, the holder of the
+ * economic rights, and the successive licensors have only limited
+ * liability.
+ *
+ * The fact that you are presently reading this means that you have had
+ * knowledge of the CeCILL-B license and that you accept its terms.
+ * ------------------------------------------------------------------------ */
/**
-* \file
-* \brief Class bbtk::WxInterfaceEditorGraphicBBS .
-*/
+ * \file
+ * \brief Class bbtk::WxInterfaceEditorGraphicBBS .
+ */
#include "bbtkwxGUIEditorGraphicBBS.h"
#include "creaWx.h"
+#include "creaSystem.h"
+//must go #include "bbtkUtilities.h"
+//must go #include "bbtkConfigurationFile.h"
+#include <wx/defs.h>
-namespace bbtk
-{
+#include <InterpreterBBS.h>
+namespace bbtk {
- //=========================================================================
- wxGUIEditorGraphicBBS::wxGUIEditorGraphicBBS(wxFrame *parent)
- : wxFrame(parent, -1, _T("bbtkGEditor"),wxDefaultPosition, wxSize(1200,800))
- {
- _frameAUIMgr = new wxAuiManager(this);
-
+//=========================================================================
+wxGUIEditorGraphicBBS::wxGUIEditorGraphicBBS(wxFrame *parent)
+ : wxFrame( parent, -1, _T("bbtkGEditor"), wxDefaultPosition, wxSize(1200,800) )
+{
+ _pkgBrowser = NULL;
+ _frameAUIMgr = new wxAuiManager(this);
+
+ /*std::string datadir( crea::System::GetExecutablePath() );
+ std::string datadir (".");
+ cout<<"RaC //------------------"<<endl;
+ cout<<"RaC //TODO wxGUIEditorGraphicBBS constructor.Initialize datadir with crea::System::GetExecutablePath() ."<<endl;
+ cout<<"RaC //------------------"<<endl;
+
+ #ifdef LINUX // assume this is OSX
+ datadir=datadir+"/../share/creaContours";
+ #endif // MACOSX
+
+ #ifdef MACOSX // assume this is OSX
+ datadir=datadir+"/../../../../share/creaContours";
+ #endif // MACOSX
+
+ _dataDir = datadir;*/
+
+ initMenu();
+ initToolbar();
+ initPackageBrowser();
+ initTabPanelsManager();
+ // JGGR & CM initHelpHTMLBrowser();
+ _helpHtmlBrowser = NULL;
+ CreateStatusBar();
+ _frameAUIMgr->Update();
+ _actualPkgBrowserBoxName = "";
+ _actualPkgBrowserPkgName = "";
+ refreshGUIControls();
+
+ /////////////////////////////////
+ /// IMPORTANT!! FOR SAVE&LOAD PROCESSES THE VERSION IS VERY IMPORTANT.
+ /// RaC 2012 2nd Hackfest
+ _currentBBGversion="1.4";
+}
+
+//=========================================================================
+wxGUIEditorGraphicBBS::~wxGUIEditorGraphicBBS()
+{
+ //EED02JUIN2010 delete _tabsMgr;
+ _frameAUIMgr->UnInit();
+ // FCY memory leaks
+ delete _frameAUIMgr;
+ delete _notebook;
+ delete _tabsMgr;
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::initToolbar()
+{
+ wxBitmap bmp_new(new_xpm);
+ wxBitmap bmp_open(open_xpm);
+ wxBitmap bmp_save(save_xpm);
+ wxBitmap bmp_run(run_xpm);
+ wxBitmap bmp_delete(delete_xpm);
+ wxBitmap bmp_centerview(centerview_xpm);
+ wxBitmap bmp_box(box_xpm);
+ wxBitmap bmp_executablebox(executablebox_xpm);
+ wxBitmap bmp_complexbox(complexbox_xpm);
+ wxBitmap bmp_complexinputport(complexinputport_xpm);
+ wxBitmap bmp_complexoutputport(complexoutputport_xpm);
+ wxBitmap bmp_undo(undo_xpm);
+ wxBitmap bmp_redo(redo_xpm);
+ wxBitmap bmp_editProperties(editProperties_xpm);
+ wxBitmap bmp_showTree(showTree_xpm);
+
+// wxToolBar *toolbar = new wxToolBar(this, wxID_ANY);
+ wxToolBar *toolbar = CreateToolBar();
+
+ //Adds a tool btn to the toolbar
+ toolbar->AddTool(ID_NEW, _T("New"), bmp_new, wxNullBitmap, wxITEM_NORMAL,
+ _T("New tab"), _T("Create a new panel tab"));
+
+ toolbar->AddTool(ID_OPEN, _T("Open diagram"), bmp_open, wxNullBitmap,
+ wxITEM_NORMAL, _T("Open a diagram"), _T("Open a diagram"));
+
+ toolbar->AddTool(ID_SAVE_DIAGRAM, _T("Save Diagram"), bmp_save,
+ wxNullBitmap, wxITEM_NORMAL, _T("Saves the current diagram"),
+ _T("Saves the current diagram")); //DFCH
+ //toolbar->AddTool(ID_SAVE_AS_DIAGRAM,_T("Save Diagram As"),bmp_save, wxNullBitmap, wxITEM_NORMAL,_T("Saves the current diagram"), _T("Saves the current diagram")); //DFCH
+ toolbar->AddTool(ID_RUN, _T("Run"), bmp_run, wxNullBitmap, wxITEM_NORMAL,
+ _T("Execute actual diagram"), _T("Execute actual diagram"));
+ toolbar->AddTool(ID_DELETEALL, _T("Delete all"), bmp_delete, wxNullBitmap,
+ wxITEM_NORMAL, _T("Delete all boxes"), _T("Delete all boxes"));
+ toolbar->AddTool(ID_CENTERVIEW, _T("Center view"), bmp_centerview,
+ wxNullBitmap, wxITEM_NORMAL, _T("Center view"), _T("Center view"));
+ toolbar->AddSeparator();
+ toolbar->AddTool(ID_BTNBOX, _T("New Box"), bmp_box, wxNullBitmap,
+ wxITEM_NORMAL, _T("New Box"), _T("Nex Box"));
+ toolbar->AddSeparator();
+ toolbar->AddTool(ID_BTEXECUTABLEBOX, _T("Select as executable Box"),
+ bmp_executablebox, wxNullBitmap, wxITEM_NORMAL,
+ _T("Select as executable Box"), _T("Select as executable Box"));
+ toolbar->AddSeparator();
+ toolbar->AddTool(ID_BTNCOMPLEXBOX, _T("Complex box"), complexbox_xpm,
+ wxNullBitmap, wxITEM_NORMAL, _T("Complex box"), _T("Complex box"));
+
+//EED 2017-09-16 Migration wxWidgets 2.8 to 3.0
+#if wxMAJOR_VERSION <= 2
+ toolbar->SetToggle(ID_BTNCOMPLEXBOX, true);
+#else
+ printf ("EED Warnning. wxGUIEditorGraphicBBS::initToolbar >>> toolbar->SetToggle \n ");
+ // ..
+#endif
+
+ // RaC 2012 2nd HackFest - Now Complex inputs are any external input
+ // toolbar->AddTool(ID_ADDCOMPLEXBOXINPUT, _T("Add input to Complex box"),
+ // bmp_complexinputport, wxNullBitmap, wxITEM_NORMAL,
+ // _T("Add input to Complex box"), _T("Add input to Complex box"));
+ toolbar->AddTool(ID_ADDCOMPLEXBOXINPUT, _T("Add external input (Complex box or console app)"),
+ bmp_complexinputport, wxNullBitmap, wxITEM_NORMAL,
+ _T("Add external input (Complex box or console app)"), _T("Add external input (Complex box or console app)"));
+
+ toolbar->AddTool(ID_ADDCOMPLEXBOXOUTPUT, _T("Add output to Complex box"),
+ bmp_complexoutputport, wxNullBitmap, wxITEM_NORMAL,
+ _T("Add output Complex box"), _T("Add output Complex box"));
+
+ // toolbar->EnableTool(ID_ADDCOMPLEXBOXINPUT, false); RaC2012 2nd HackFest
+ toolbar->EnableTool(ID_ADDCOMPLEXBOXINPUT, true);
+
+ toolbar->EnableTool(ID_ADDCOMPLEXBOXOUTPUT, false);
+ toolbar->AddSeparator();
+ toolbar->AddTool(ID_UNDO, _T("Undo"),bmp_undo, wxNullBitmap, wxITEM_NORMAL, _T("Undo"), _T("Undo"));
+ toolbar->AddTool(ID_REDO, _T("Redo"),bmp_redo, wxNullBitmap, wxITEM_NORMAL, _T("Redo"), _T("Redo"));
+ toolbar->AddSeparator();
+ toolbar->AddTool(ID_EDITPROPERTIES, _T("Edit diagram properties"),bmp_editProperties, wxNullBitmap, wxITEM_NORMAL, _T("Edit diagram properties"), _T("Edit diagram properties"));
+ toolbar->EnableTool(ID_EDITPROPERTIES, false);
+
+ toolbar->AddTool(ID_SHOWTREE, _T("Show tree"),bmp_showTree, wxNullBitmap, wxITEM_NORMAL, _T("Show tree"), _T("Show tree"));
+
+
+ toolbar->EnableTool(ID_UNDO, false);
+ toolbar->EnableTool(ID_REDO, false);
+ toolbar->SetMargins(2, 2);
+ toolbar->Realize();
+ SetToolBar(toolbar);
- /*std::string datadir( crea::System::GetExecutablePath() );
- std::string datadir (".");
- cout<<"RaC //------------------"<<endl;
- cout<<"RaC //TODO wxGUIEditorGraphicBBS constructor.Initialize datadir with crea::System::GetExecutablePath() ."<<endl;
- cout<<"RaC //------------------"<<endl;
- #ifdef LINUX // assume this is OSX
- datadir=datadir+"/../share/creaContours";
- #endif // MACOSX
- #ifdef MACOSX // assume this is OSX
- datadir=datadir+"/../../../../share/creaContours";
- #endif // MACOSX
-
- _dataDir = datadir;*/
-
- initMenu();
- initToolbar();
- initTabPanelsManager();
- initPackageBrowser();
- initHelpHTMLBrowser();
-
- CreateStatusBar();
- _frameAUIMgr->Update();
- _actualPkgBrowserBoxName="";
- _actualPkgBrowserPkgName="";
- }
+ // connect command event handlers
+
+ Connect(ID_NEW, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreateNewTab));
+ Connect(ID_OPEN, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnOpenDiagram));
+ Connect(ID_SAVE_DIAGRAM, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveActualDiagram)); //DFCH
+ Connect(ID_SAVE_AS_DIAGRAM, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveAsActualDiagram)); //DFCH
+ Connect(
+ ID_RUN,
+ wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnExecuteActualDiagram));
+ Connect(
+ ID_DELETEALL,
+ wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnDeleteAllBoxesActualDiagram));
+ Connect(
+ ID_CENTERVIEW,
+ wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCenterViewActualDiagram));
+ Connect(ID_BTNBOX, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnClickBtnBox));
+ Connect(
+ ID_BTEXECUTABLEBOX,
+ wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnClickBtnExecutableBox));
+ Connect(ID_BTNCOMPLEXBOX, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnClickBtnComplexBox));
+ Connect(ID_ADDCOMPLEXBOXINPUT, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnAddComplexBoxInput));
+ Connect(ID_ADDCOMPLEXBOXOUTPUT, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnAddComplexBoxOutput));
+ Connect(ID_UNDO,wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler(wxGUIEditorGraphicBBS::OnUndo));
+ Connect(ID_REDO,wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler(wxGUIEditorGraphicBBS::OnRedo));
+ Connect(ID_CHANGENAME, wxEVT_COMMAND_RIGHT_CLICK, wxCommandEventHandler(wxGUIEditorGraphicBBS::OnChangeName));
+ Connect(ID_EDITPROPERTIES,wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler(wxGUIEditorGraphicBBS::OnEditDiagramProperties));
+ Connect(ID_SHOWTREE,wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler(wxGUIEditorGraphicBBS::OnShowTree));
+
+
+}
+//=========================================================================
+void wxGUIEditorGraphicBBS::initHelpHTMLBrowser() {
+ // JGRR & CM
+ _helpHtmlBrowser = new WxGUIHtmlBrowser(this, wxSize(200, 0));
+
+ // EO JGRR & CM
+
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::initMenu() {
+ // Create File menu and its items
+ wxMenu *fileMenu = new wxMenu();
+ fileMenu->Append(ID_NEW, _T("New diagram"), _T("New"));
+ fileMenu->Append(ID_SAVE_DIAGRAM, _T("Save Diagram"), _T("Save Diagram")); //DFCH
+ fileMenu->Append(ID_SAVE_AS_DIAGRAM, _T("Save Diagram As"),
+ _T("Save Diagram As")); //DFCH
+ fileMenu->Append(ID_OPEN_BBS, _T("Open BBS"), _T("Open BBS"));
+ // CM
+ fileMenu->Append(ID_OPEN, _T("Open a diagram"), _T("Open a diagram"));
+ fileMenu->Append(ID_SAVE_AS_BBS, _T("Save BBS"), _T("Save BBS"));
+ fileMenu->Append(ID_SAVE_AS_COMPLEXBOX, _T("Save complex box"),
+ _T("Save complex box"));
+ fileMenu->Append(ID_EXPORT_CONSOLEAPP, _T("Export console commands"),
+ _T("Export console execution commands"));
+ fileMenu->Append(wxID_EXIT, _T("E&xit"), _T("Exit"));
+
+ Connect(ID_NEW, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreateNewTab));
+ Connect(ID_SAVE_DIAGRAM, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveActualDiagram)); //DFCH
+ Connect(ID_SAVE_AS_DIAGRAM, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveAsActualDiagram));
+ Connect(ID_OPEN_BBS, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnOpenBBS));
+ Connect(ID_SAVE_AS_BBS, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveActualBBS));
+ Connect( ID_SAVE_AS_COMPLEXBOX, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveActualComplexBox));
+ Connect( ID_EXPORT_CONSOLEAPP, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnExportConsoleExecCommand));
+ Connect(wxID_EXIT, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnExit));
+
+ // Create Edit menu and its items
+ wxMenu *editMenu = new wxMenu;
+ editMenu->Append(ID_COPY_TO_COMPLEXDIAGRAM, _T("Copy selected to complex box"), _T("Creates a new complex box diagram with selected boxes"));
+ editMenu->Append(ID_EDIT_COMPLEXBOX_SCRIPT, _T("Edit Complex Box"), _T("Edit Complex Box"));
+ Connect( ID_COPY_TO_COMPLEXDIAGRAM, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCopySelectedToComplexDiagram));
+ Connect( ID_EDIT_COMPLEXBOX_SCRIPT, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnEditComplexBoxScript));
+
+ // Create Help menu and its items
+ wxMenu *helpMenu = new wxMenu;
+ helpMenu->Append(wxID_ABOUT, _T("&About..."), _T("About"));
+ helpMenu->Append(ID_HELP_BBEDITOR, _T("&Help..."), _T("Help"));
+ Connect(ID_HELP_BBEDITOR, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnHelpBBeditor));
+
+ // Create Tool menu
+ wxMenu *menuTools = new wxMenu;
+ menuTools->Append(ID_bbEditor_Tool_Menu_CreatePackage,
+ _T("Create &package") );
+ menuTools->Append(ID_bbEditor_Tool_Menu_CreateBlackBox,
+ _T("Create &blackbox") );
+ menuTools->Append(ID_bbEditor_Tool_Menu_PlugPackage, _T("Plug package") );
+ menuTools->Append(ID_bbEditor_Tool_Menu_EditConfig, _T("&Edit bbtk config") );
+ menuTools->Append(ID_bbEditor_Tool_Menu_ShowHTMLDoc,
+ _T("Show &HTML documentation") );
+ menuTools->Append(ID_bbEditor_Tool_Menu_CreateIndex, _T("&Generate index") );
+
+ Connect(ID_bbEditor_Tool_Menu_CreatePackage, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreatePackage));
+ Connect(ID_bbEditor_Tool_Menu_CreateBlackBox, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreateBlackBox));
+ Connect(ID_bbEditor_Tool_Menu_PlugPackage, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnPlugPackage));
+ Connect(ID_bbEditor_Tool_Menu_EditConfig, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnEditConfig));
+ Connect(ID_bbEditor_Tool_Menu_ShowHTMLDoc, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnShowHTMLDoc));
+ Connect(ID_bbEditor_Tool_Menu_CreateIndex, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreateIndex));
+
+ // Append the created menu to the menu bar
+ wxMenuBar *menuBar = new wxMenuBar();
+ menuBar->Append(fileMenu, _T("&File") );
+ menuBar->Append(editMenu, _T("&Edit") );
+ menuBar->Append(menuTools, _T("&Tool") );
+ menuBar->Append(helpMenu, _T("&Help") );
+
+ // Attach this menu bar to the frame
+ SetMenuBar(menuBar);
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::initTabPanelsManager()
+{
+ _notebook = new wxAuiNotebook(this, wxID_NOTEBOOK, wxDefaultPosition,
+ wxDefaultSize, wxAUI_NB_TOP | wxAUI_NB_TAB_MOVE
+ | wxAUI_NB_CLOSE_ON_ACTIVE_TAB | wxAUI_NB_TAB_FIXED_WIDTH
+ | wxAUI_NB_WINDOWLIST_BUTTON);
+ _tabsMgr = new wxTabPanelsManager(this);
+ _frameAUIMgr->AddPane(_notebook, wxAuiPaneInfo().CenterPane());
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::initPackageBrowser()
+{
+ _pkgBrowser = new WxGUIPackageBrowser2(this);
+ _pkgBrowser->IncludeAll();
+ _frameAUIMgr->AddPane(_pkgBrowser, wxAuiPaneInfo().Left().MinSize(30, 500).BestSize(750,500).CloseButton(false));
+}
+//================================================================
- //=========================================================================
- wxGUIEditorGraphicBBS::~wxGUIEditorGraphicBBS()
- {
- _frameAUIMgr->UnInit();
+void wxGUIEditorGraphicBBS::DoRegeneratePackageDoc(const std::string& pack)
+{
+ std::string mess("Regenerating doc for package '");
+ if (pack != "-a") {
+ mess += pack + "'";
+ } else {
+ mess = "Regenerating doc for all packages";
}
- //=========================================================================
- void wxGUIEditorGraphicBBS::initToolbar()
- {
- wxBitmap bmp_new(new_xpm);
- wxBitmap bmp_save(save_xpm);
- wxBitmap bmp_run(run_xpm);
- wxBitmap bmp_delete(delete_xpm);
- wxBitmap bmp_centerview(centerview_xpm);
-
- wxToolBar *_toolbar = new wxToolBar(this, wxID_ANY);
-
- //Adds a tool btn to the toolbar
- _toolbar->AddTool(1000,_T("New"),bmp_new, wxNullBitmap, wxITEM_NORMAL,_T("New tab"), _T("Create a new panel tab"));
- _toolbar->AddTool(1001,_T("Save diagram"),bmp_save, wxNullBitmap, wxITEM_NORMAL,_T("Saves actual diagram"), _T("Saves actual diagram"));
- _toolbar->AddTool(1002,_T("Execute"),bmp_run, wxNullBitmap, wxITEM_NORMAL,_T("Execute actual diagram"), _T("Execute actual diagram"));
- _toolbar->AddTool(1003,_T("Delete all"),bmp_delete, wxNullBitmap, wxITEM_NORMAL,_T("Delete all boxes"), _T("Delete all boxes"));
- _toolbar->AddTool(1004,_T("Center view"),bmp_centerview, wxNullBitmap, wxITEM_NORMAL,_T("Center view"), _T("Center view"));
-
+ mess += " ... please wait";
+
+ SetStatusText(std2wx(mess));
+
+ //BBTK_BUSY_CURSOR;
+
+ std::string command;
+#if defined(WIN32)
+ command = "\"";
+#endif
+ command += ConfigurationFile::GetInstance().Get_bin_path();
+ command += ConfigurationFile::GetInstance().Get_file_separator();
+ command += "bbRegeneratePackageDoc";
+#if defined(WIN32)
+ command += "\"";
+#endif
+
+ command += " " + pack + " -q";
+ bbtkMessage("debug",1,"Executing system command '"<<command<<"'"<<std::endl);
+
+ if (!system(command.c_str())) {
+ SetStatusText(_T("Done !"));
+ /*
+ wxMessageBox(_T("Done !"),_T("Regenerate package '")
+ +std2wx(pack)+_T("' doc"),
+ wxOK | wxICON_INFORMATION);
+ */
+ } else {
+ SetStatusText(_T("Done !"));
+ wxString err(_T("An error occured while running '"));
+ err += bbtk::std2wx(command) + _T("'");
+ wxMessageBox(err, _T("Regenerate package doc"), wxOK | wxICON_ERROR);
+ }
+}
+
+//================================================================
+void wxGUIEditorGraphicBBS::DoRegenerateBoxesLists() {
+ SetStatusText(_T("Regenerating boxes lists ... please wait"));
+ //BBTK_BUSY_CURSOR ;
+
+ std::string command;
+#if defined(WIN32)
+ command = "\"";
+#endif
+ command += ConfigurationFile::GetInstance().Get_bin_path();
+ command += ConfigurationFile::GetInstance().Get_file_separator();
+ command += "bbRegenerateBoxesLists";
+
+#if defined(WIN32)
+ command += "\"";
+#endif
+ command += " -q";
+
+ bbtkMessage("debug",1,"Executing system command '"<<command<<"'"<<std::endl);
+
+ if (!system(command.c_str())) {
+ SetStatusText(_T("Done !"));
+ /*
+ wxMessageBox(_T("Done !"),_T("Regenerate boxes lists"),
+ wxOK | wxICON_INFORMATION);
+ */
+ } else {
+ SetStatusText(_T("Done !"));
+ wxString err(_T("An error occured while running '"));
+ err += bbtk::std2wx(command) + _T("'");
+ wxMessageBox(err, _T("Regenerate boxes lists"), wxOK | wxICON_ERROR);
+ }
+}
- _toolbar->SetMargins( 2, 2 );
- _toolbar->Realize();
- SetToolBar(_toolbar);
+//================================================================
+void wxGUIEditorGraphicBBS::RegenerateAll() {
+ DoRegeneratePackageDoc("-a");
+ DoRegenerateBoxesLists();
+}
- // connect command event handlers
- Connect(1000,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreateNewTab));
- Connect(1001,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveActualDiagram));
- Connect(1002,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnExecuteActualDiagram));
- Connect(1003,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnDeleteAllBoxesActualDiagram));
- Connect(1004,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCenterViewActualDiagram));
+//================================================================
+wxAuiNotebook* wxGUIEditorGraphicBBS::getAuiNotebook() {
+ return _notebook;
+}
+
+//================================================================
+
+void wxGUIEditorGraphicBBS::displayBlackBoxInfo(std::string packageName, std::string boxName)
+{
+ if (_actualPkgBrowserPkgName != packageName || _actualPkgBrowserBoxName != boxName)
+ {
+
+ _actualPkgBrowserPkgName = packageName;
+ _actualPkgBrowserBoxName = boxName;
+
+//EED 15 oct 2012 BlackBoxDescriptor::Pointer descriptor = GObjectsMVCFactory::getInstance()->getBlackBoxDescriptor(packageName, boxName);
+
+ Package::Pointer k;
+//EED ComplexBlackBoxDescriptor::Pointer descriptor;
+ BlackBoxDescriptor::Pointer descriptor;
+
+ std::map< std::string, BlackBoxDescriptor::Pointer> mapDesc;
+ k = _pkgBrowser->GetFactory()->GetPackage(_actualPkgBrowserPkgName);
+ mapDesc = k->GetDescriptorMap();
+ descriptor = mapDesc[_actualPkgBrowserBoxName];
+/*
+ tree.treeTour(0);
+
+ tree.deleteTree();
+
+ descriptor->GetBoxesInside(tree, 0);
+
+ //tree.treeTour(0);
+ //std::vector<std::string> boxesDiagram = _sceneM->boxesDiagram;
+ //for(int i=0;i<boxesDiagram.size();i++){
+ // std::cout<<"caja: "<<boxesDiagram[i]<<std::endl;
+ //}
+
+ _actualPkgBrowserPkgName = "";
+ _actualPkgBrowserBoxName = "";
+*/
+ /*
+ Package::Pointer k;
+ BlackBoxDescriptor::Pointer descriptor;
+ std::map< std::string, BlackBoxDescriptor::Pointer> mapDesc;
+ k = _pkgBrowser->GetFactory()->GetPackage(packageName);
+ std::vector<std::string> temp;
+ _pkgBrowser->GetFactory()->GetPackagesList(temp);
+ for(int ii = 0 ; ii < temp.size() ; ii++)
+ {
+ std::cout << " packs "<< temp[ii]<< std::endl;
+ }
+ mapDesc = k->GetDescriptorMap();
+ descriptor = mapDesc[boxName];
+ */
+ _pkgBrowser->WxGUIBlackBoxListUserOnSelected(descriptor.get());
}
- //=========================================================================
- void wxGUIEditorGraphicBBS::initHelpHTMLBrowser()
+}
+
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::editBlackBox(GBlackBoxModel *bbmodel) {
+ wxBlackBoxEditionDialog* dialog =
+ new wxBlackBoxEditionDialog(this, bbmodel);
+ dialog->Show();
+}
+
+//=========================================================================
+
+bool wxGUIEditorGraphicBBS::boxNameExists(std::string boxname) {
+
+ return this->_tabsMgr->getActualTabPanel()->getSceneManager()->boxExist(boxname);
+}
+
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::updateStatusBar(std::string textStatus) {
+ SetStatusText(crea::std2wx(textStatus));
+}
+
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::executeScript(std::string script) {
+ std::string separator =
+ ConfigurationFile::GetInstance().Get_file_separator();
+ std::string dir = ConfigurationFile::GetInstance().Get_default_temp_dir();
+ std::string filename = dir + separator + "tmp_bbtk.bbs";
+
+ ofstream tempFile;
+ tempFile.open(filename.c_str());
+ tempFile << script;
+ tempFile.close();
+
+ std::string command = "";
+
+#ifdef WIN32
+ command += "start /b ";
+#endif
+
+ // command += "\""+ crea::System::GetExecutablePath();
+ //#ifdef MACOSX
+ // command += separator + "../../../bbi.app/Contents/MacOS";
+ //#endif
+
+ command += "bbi ";
+ command += "\"" + filename + "\"";
+
+#ifndef WIN32
+ command += " & ";
+#endif
+
+#ifdef __APPLE__
+ command = "source ~/.bbtk/profile_creatools; "+command;
+#endif
+
+
+ printf("RaC wxGUIEditorGraphicBBS::executeScript %s \n", command.c_str());
+ system(command.c_str());
+}
+
+//=========================================================================
+std::string wxGUIEditorGraphicBBS::CheckExtension(std::string filename, std::string extension) {
+ if(filename.size() > extension.size() ){
+ if( (filename.compare(filename.size()-extension.size(), extension.size(),extension)) !=0 ){
+ filename.append(extension);
+ }
+ }else{
+ filename.append(extension);
+ }
+ return filename;
+}
+//=========================================================================
+// EVENT HANDLERS
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::OnCreateNewTab(wxCommandEvent& event) {
+ _tabsMgr->addNewTab();
+ refreshGUIControls();
+}
+
+void wxGUIEditorGraphicBBS::OnUndo(wxCommandEvent& event) {
+ unsigned short disable;
+ std::string stundo;
+ std::string stredo;
+
+ _tabsMgr->loadTempDiagram(0);
+ disable = _tabsMgr->getUndoState(stundo);
+ if(disable == 0)
{
- //TO FIX THE PATH OF BBTK BIN IN ORDER TO USE REGENERATE EXECUTABLES
- //RegenerateAll();
- _helpHtmlBrowser = new WxGUIHtmlBrowser(this,wxSize(200,0));
- _frameAUIMgr->AddPane(_helpHtmlBrowser,wxAuiPaneInfo().Right().MinSize(200,200));
+ std::string name = _tabsMgr->GetNameTabPanel();
+ if(name[name.length() - 1] == '*')
+ {
+ name =name.substr(0,name.length()-1);
+ }
+ _tabsMgr->SetNameTabPanel(wxString (name.c_str(), wxConvUTF8));
}
- //=========================================================================
- void wxGUIEditorGraphicBBS::initMenu()
+ GetToolBar()->EnableTool(ID_UNDO,disable);
+ GetToolBar()->SetToolShortHelp(ID_UNDO,crea::std2wx(stundo));
+ GetToolBar()->EnableTool(ID_REDO,_tabsMgr->getRedoState(stredo));
+ GetToolBar()->SetToolShortHelp(ID_REDO,crea::std2wx(stredo));
+ refreshGUIControls();
+}
+
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::OnRedo(wxCommandEvent& event) {
+ unsigned short disable;
+ std::string stundo;
+ std::string stredo;
+
+ _tabsMgr->loadTempDiagram(1);
+ std::string name = _tabsMgr->GetNameTabPanel();
+ if(name[name.length() - 1] != '*')
+ name +="*";
+ _tabsMgr->SetNameTabPanel(wxString (name.c_str(), wxConvUTF8));
+ GetToolBar()->EnableTool(ID_UNDO,_tabsMgr->getUndoState(stundo));
+ GetToolBar()->SetToolShortHelp(ID_UNDO,crea::std2wx(stundo));
+ GetToolBar()->EnableTool(ID_REDO,_tabsMgr->getRedoState(stredo));
+ GetToolBar()->SetToolShortHelp(ID_REDO,crea::std2wx(stredo));
+ refreshGUIControls();
+}
+
+void wxGUIEditorGraphicBBS::OnChangeName(wxCommandEvent& event){
+}
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::OnShowTree(wxCommandEvent& event){
+ std::cout << "wxGUIEditorGraphicBBS::OnShowTree"<<std::endl;
+if (_actualPkgBrowserPkgName !="" || _actualPkgBrowserBoxName != "")
{
- // create a menu bar
- wxMenu *fileMenu = new wxMenu;
+ Package::Pointer k;
+//EED ComplexBlackBoxDescriptor::Pointer descriptor;
+ BlackBoxDescriptor::Pointer descriptor;
- // the "About" item should be in the help menu
- wxMenu *helpMenu = new wxMenu;
- helpMenu->Append(wxID_ABOUT, _T("&About..."), _T("About"));
- fileMenu->Append(wxID_EXIT, _T("E&xit"), _T("Exit"));
+ std::map< std::string, BlackBoxDescriptor::Pointer> mapDesc;
+ k = _pkgBrowser->GetFactory()->GetPackage(_actualPkgBrowserPkgName);
+ mapDesc = k->GetDescriptorMap();
+ descriptor = mapDesc[_actualPkgBrowserBoxName];
- Connect(wxID_EXIT,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnExit));
+ tree.treeTour(0);
- // now append the freshly created menu to the menu bar...
- wxMenuBar *menuBar = new wxMenuBar();
- menuBar->Append(fileMenu, _T("&File"));
- menuBar->Append(helpMenu, _T("&Help"));
+ tree.deleteTree();
- // attach this menu bar to the frame
- SetMenuBar(menuBar);
+ descriptor->GetBoxesInside(tree, 0);
+
+ _actualPkgBrowserPkgName = "";
+ _actualPkgBrowserBoxName = "";
}
-
- //=========================================================================
- void wxGUIEditorGraphicBBS::initTabPanelsManager()
+else
{
- _notebook = new wxAuiNotebook(this,wxID_ANY,wxDefaultPosition,wxDefaultSize,wxAUI_NB_TOP|wxAUI_NB_TAB_MOVE|wxAUI_NB_CLOSE_ON_ACTIVE_TAB|wxAUI_NB_TAB_FIXED_WIDTH|wxAUI_NB_WINDOWLIST_BUTTON);
- _tabsMgr = new wxTabPanelsManager(this);
- _frameAUIMgr->AddPane(_notebook,wxAuiPaneInfo().CenterPane());
+ std::cout<<"Select a Box"<<std::endl;
+ }
+}
+
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::OnEditDiagramProperties(wxCommandEvent& event)
+{
+ wxDiagramPropertiesEditionDialog* dialog =
+ new wxDiagramPropertiesEditionDialog(this, tree);
+ dialog->Show();
+}
+
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::OnExecuteActualDiagram(wxCommandEvent& event) {
+ std::string script1 = _tabsMgr->getActualDiagramBBS(true);
+ cout << endl << "RaC wxGUIEditorGraphicBBS::executeActualDiagram SCRIPT"
+ << endl << endl;
+ cout << script1 << endl;
+ std::string script2 = _tabsMgr->getActualDiagramBBS(false);
+ executeScript(script2);
+}
+
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OpenBBS(std::string filePathName, std::string fileName)
+{
+ _tabsMgr->addNewTab( crea::std2wx(fileName) );
+ bbtk::InterpreterBBS::Pointer I = bbtk::InterpreterBBS::New( this->_tabsMgr->getActualTabPanel()->getSceneManager(), _pkgBrowser->GetFactory());
+ // We tell the interpreter to throw exceptions on error
+ I->SetThrow(true);
+ // Interpret the file supposed to define a box called 'Processing'
+ I->InterpretFile( filePathName );
+ refreshGUIControls();
+}
+
+//=========================================================================
+// HANDLERS
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnOpenBBS(wxCommandEvent& event)
+{
+//EED 2017-09-16 Migration wxWidgets 2.8 to 3.0
+#if wxMAJOR_VERSION <= 2
+ wxFileDialog * openFileDialog = new wxFileDialog(this, wxT("Open BBS"), wxEmptyString, wxT("NewBBS"), wxT("*.bbs"), wxOPEN);
+#else
+ wxFileDialog * openFileDialog = new wxFileDialog(this, wxT("Open BBS"), wxEmptyString, wxT("NewBBS"), wxT("*.bbs"), wxFD_OPEN);
+#endif
+
+ if (openFileDialog->ShowModal() == wxID_OK)
+ {
+ OpenBBS( crea::wx2std(openFileDialog->GetPath()) , crea::wx2std(openFileDialog->GetFilename()) );
}
- //=========================================================================
- void wxGUIEditorGraphicBBS::initPackageBrowser()
+/*EED Borrame
+ if (openFileDialog->ShowModal() == wxID_OK)
{
- _pkgBrowser = new WxGUIPackageBrowser2(this);
- _pkgBrowser->IncludeAll();
- _frameAUIMgr->AddPane(_pkgBrowser,wxAuiPaneInfo().Left().MinSize(200,200).CloseButton(false));
+ wxString fileName = openFileDialog->GetPath();
+ _tabsMgr->addNewTab(openFileDialog->GetFilename());
+ bbtk::InterpreterBBS::Pointer I = bbtk::InterpreterBBS::New( this->_tabsMgr->getActualTabPanel()->getSceneManager(), _pkgBrowser->GetFactory());
+ // We tell the interpreter to throw exceptions on error
+ I->SetThrow(true);
+ // Interpret the file supposed to define a box called 'Processing'
+ I->InterpretFile((const char*) (fileName.mb_str()));
+ }
+ refreshGUIControls();
+*/
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::SaveActualBBS(std::string filename) {
+ ofstream file;
+
+ //EED file.open(fileName.c_str());
+ file.open(filename.c_str());
+ std::string content = "";
+ // writing file header
+ content += "# ----------------------------------\n";
+ content += "# - BBTKGEditor v ";
+ content += _currentBBGversion; //VERSION
+ content += " BBS BlackBox Script\n";
+ content += "# - ";
+ content += filename;
+ content += "\n";
+ content += "# ----------------------------------\n";
+ content += "\n";
+ content += _tabsMgr->getActualDiagramBBS();
+ file << content;
+ file.close();
+}
+
+void wxGUIEditorGraphicBBS::OnSaveActualBBS(wxCommandEvent& event) {
+
+//EED 2017-09-16 Migration wxWidgets 2.8 to 3.0
+#if wxMAJOR_VERSION <= 2
+ wxFileDialog * saveFileDialog = new wxFileDialog(this,
+ wxT("Save actual BBS"), wxEmptyString, wxT("NewBBS"),
+ wxT("*.bbs"), wxSAVE | wxOVERWRITE_PROMPT);
+#else
+ wxFileDialog * saveFileDialog = new wxFileDialog(this,
+ wxT("Save actual BBS"), wxEmptyString, wxT("NewBBS"),
+ wxT("*.bbs"), wxFD_SAVE | wxFD_OVERWRITE_PROMPT);
+#endif
+
+ if (saveFileDialog->ShowModal() == wxID_OK) {
+ wxString fileName = saveFileDialog->GetPath();
+ std::string filename = (const char*) (fileName.mb_str());
+ filename=CheckExtension (filename, ".bbs");
+ SaveActualBBS(filename);
}
- //================================================================
+}
- void wxGUIEditorGraphicBBS::DoRegeneratePackageDoc( const std::string& pack )
- {
- std::string mess("Regenerating doc for package '");
- if (pack!="-a"){
- mess += pack + "'";
- }
- else
- {
- mess = "Regenerating doc for all packages";
- }
-
- mess += " ... please wait";
+void wxGUIEditorGraphicBBS::AskComplexBoxConfiguration() {
+ std::string cbName = _tabsMgr->GetCbName();
+ std::string paName = _tabsMgr->GetCbPackageName();
- SetStatusText( std2wx(mess) );
+ wxTextEntryDialog *cbNameDialog = new wxTextEntryDialog(this,
+ wxT("Complex Box name"));
+ wxTextEntryDialog *paNameDialog = new wxTextEntryDialog(this,
+ wxT("Package name"));
- //BBTK_BUSY_CURSOR;
+ cbNameDialog->SetValue(wxString(cbName.c_str(), wxConvUTF8));
+ paNameDialog->SetValue(wxString(paName.c_str(), wxConvUTF8));
- std::string command;
- #if defined(WIN32)
- command = "\"";
- #endif
- command += ConfigurationFile::GetInstance().Get_bin_path();
- command += ConfigurationFile::GetInstance().Get_file_separator();
- command += "bbRegeneratePackageDoc";
- #if defined(WIN32)
- command += "\"";
- #endif
+ if (cbNameDialog->ShowModal() == wxID_OK) {
+ wxString complexboxname = cbNameDialog->GetValue();
+ cbName = (const char*) (complexboxname.mb_str());
+ }
- command += " " + pack + " -q";
- bbtkMessage("debug",1,"Executing system command '"<<command<<"'"<<std::endl);
+ if (paNameDialog->ShowModal() == wxID_OK) {
+ wxString packagename = paNameDialog->GetValue();
+ paName = (const char*) (packagename.mb_str());
+ }
- if ( ! system ( command.c_str() ) )
- {
- SetStatusText( _T("Done !"));
- /*
- wxMessageBox(_T("Done !"),_T("Regenerate package '")
- +std2wx(pack)+_T("' doc"),
- wxOK | wxICON_INFORMATION);
- */
- }
- else
- {
- SetStatusText( _T("Done !"));
- wxString err(_T("An error occured while running '"));
- err += bbtk::std2wx(command) + _T("'");
- wxMessageBox(err,_T("Regenerate package doc"),wxOK | wxICON_ERROR);
- }
+ _tabsMgr->SetCbName(cbName);
+ _tabsMgr->SetCbPackageName(paName);
+}
+
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::SaveActualComplexBox(std::string filename) {
+ ofstream file;
+ file.open(filename.c_str());
+
+ std::string content = "";
+
+ // writing file header
+ content += "# ----------------------------------\n";
+ content += "# - BBTKGEditor v ";
+ content += _currentBBGversion;//VERSION
+ content += " BBS BlackBox Script (Complex Box)\n";
+ content += "# - ";
+ content += filename;
+ content += "\n";
+ content += "# ----------------------------------\n";
+ content += "\n";
+ content += _tabsMgr->getActualComplexBoxBBS();
+ file << content;
+ file.close();
+}
+
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::OnSaveActualComplexBox(wxCommandEvent& event)
+{
+//EED 2017-09-16 Migration wxWidgets 2.8 to 3.0
+#if wxMAJOR_VERSION <= 2
+ wxFileDialog * saveFileDialog = new wxFileDialog(this,
+ wxT("Save Complex Box BBS"), wxEmptyString,
+ _T("ComplexBoxName"), wxT("*.bbs"), wxSAVE
+ | wxOVERWRITE_PROMPT);
+#else
+ wxFileDialog * saveFileDialog = new wxFileDialog(this,
+ wxT("Save Complex Box BBS"), wxEmptyString,
+ _T("ComplexBoxName"), wxT("*.bbs"), wxFD_SAVE
+ | wxFD_OVERWRITE_PROMPT);
+#endif
+
+ if (saveFileDialog->ShowModal() == wxID_OK) {
+ wxString fileName = saveFileDialog->GetPath();
+ std::string filename = (const char*) (fileName.mb_str());
+ filename=CheckExtension (filename, ".bbs");
+ SaveActualComplexBox(filename);
}
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::SaveActualDiagram(std::string filename) {
+ ofstream file;
+ file.open(filename.c_str());
+
+ std::string content = "";
+
+ // writing file header
+ content += "# ----------------------------------\n";
+ content += "# - BBTKGEditor v ";
+ content += _currentBBGversion; //VERSION
+ content += " BBG BlackBox Diagram file\n";
+ content += "# - ";
+
+ content += filename;
+
+ content += "\n";
+ content += "# ----------------------------------\n";
+ content += "\n";
+ content += "APP_START\n";
+ _tabsMgr->saveActualDiagram(content, filename); //DFCH
+ content += "APP_END\n";
+ file << content;
+ file.close();
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::SaveTempActualDiagram(const std::string &action)
+{
+ std::string stundo;
+ std::string stredo;
+ std::string name = _tabsMgr->GetNameTabPanel();
+ if(name[name.length() - 1] != '*')
+ name +="*";
+ _tabsMgr->SetNameTabPanel(wxString (name.c_str(), wxConvUTF8));
+ _tabsMgr->saveTempActualDiagram(action);
+ GetToolBar()->EnableTool(ID_UNDO,_tabsMgr->getUndoState(stundo));
+ GetToolBar()->SetToolShortHelp(ID_UNDO,crea::std2wx(stundo));
+ GetToolBar()->EnableTool(ID_REDO,_tabsMgr->getRedoState(stredo));
+ GetToolBar()->SetToolShortHelp(ID_REDO,crea::std2wx(stredo));
+}
+
+//=========================================================================
+
+//The following method allows to save the current diagram asking the filename
+//DFCH
+void wxGUIEditorGraphicBBS::SaveCurrentDiagramAs()
+{
- //================================================================
- void wxGUIEditorGraphicBBS::DoRegenerateBoxesLists()
+//EED 2017-09-16 Migration wxWidgets 2.8 to 3.0
+#if wxMAJOR_VERSION <= 2
+ wxFileDialog * saveFileDialog = new wxFileDialog(this,
+ wxT("Save current diagram"), wxEmptyString, wxT("NewDiagram"),
+ wxT("*.bbg"), wxSAVE | wxOVERWRITE_PROMPT);
+#else
+ wxFileDialog * saveFileDialog = new wxFileDialog(this,
+ wxT("Save current diagram"), wxEmptyString, wxT("NewDiagram"),
+ wxT("*.bbg"), wxFD_SAVE | wxFD_OVERWRITE_PROMPT);
+#endif
+
+ if (saveFileDialog->ShowModal() == wxID_OK) {
+ //_tabsMgr->SetNameTabPanel(saveFileDialog->GetFilename());
+ wxString pathfileName = saveFileDialog->GetPath();
+ std::string pathfilename = (const char*) (pathfileName.mb_str());
+ pathfilename=CheckExtension (pathfilename, ".bbg");
+
+ //modify the tab name accordingly
+ wxString fileName = saveFileDialog->GetFilename();
+ std::string filename = (const char*) (fileName.mb_str());
+ filename=CheckExtension (filename, ".bbg");
+ _tabsMgr->SetNameTabPanel( wxString (filename.c_str(), wxConvUTF8) );
+
+ std::string pathfilenamebbs = pathfilename;
+ pathfilenamebbs[pathfilenamebbs.length() - 1] = 's';
+ if (_tabsMgr->isActualDiagramComplexBox() == false) {
+ SaveActualDiagram(pathfilename);
+ SaveActualBBS(pathfilenamebbs);
+ } else {
+ AskComplexBoxConfiguration();
+ SaveActualDiagram(pathfilename);
+ SaveActualComplexBox(pathfilenamebbs);
+ } //if isActualDiagramComplexBox
+ } // if saveFileDialog
+}
+//=========================================================================
+//DFCH
+void wxGUIEditorGraphicBBS::OnSaveActualDiagram(wxCommandEvent& event) {
+ std::string pathfilename = _tabsMgr->GetCurrentTabPanelPath();
+ if (pathfilename.empty()) {
+ SaveCurrentDiagramAs();
+ } else {
+ std::string pathfilenamebbs = pathfilename;
+ pathfilenamebbs[pathfilenamebbs.length() - 1] = 's';
+
+ if (_tabsMgr->isActualDiagramComplexBox() == false) {
+ std::string name = _tabsMgr->GetNameTabPanel();
+ if(name[name.length() - 1] == '*')
+ {
+ name =name.substr(0,name.length()-1);
+ }
+ _tabsMgr->SetNameTabPanel(wxString (name.c_str(), wxConvUTF8));
+ SaveActualDiagram(pathfilename);
+ SaveActualBBS(pathfilenamebbs);
+ } else {
+ AskComplexBoxConfiguration();
+ SaveActualDiagram(pathfilename);
+ SaveActualComplexBox(pathfilenamebbs);
+ } //if isActualDiagramComplexBox
+ }
+}
+//=========================================================================
+//DFCH
+void wxGUIEditorGraphicBBS::OnSaveAsActualDiagram(wxCommandEvent& event) {
+ SaveCurrentDiagramAs();
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnExportConsoleExecCommand(wxCommandEvent& event)
+{
+//EED 2017-09-16 Migration wxWidgets 2.8 to 3.0
+#if wxMAJOR_VERSION <= 2
+ wxFileDialog * saveFileDialog = new wxFileDialog(this,
+ wxT("Export console command"), wxEmptyString, wxT("ConsoleApp.txt"),
+ wxT("*.txt;*.bbs;*.bbg;*.sh;*.bat"), wxSAVE | wxOVERWRITE_PROMPT);
+#else
+ wxFileDialog * saveFileDialog = new wxFileDialog(this,
+ wxT("Export console command"), wxEmptyString, wxT("ConsoleApp.txt"),
+ wxT("*.txt;*.bbs;*.bbg;*.sh;*.bat"), wxFD_SAVE | wxFD_OVERWRITE_PROMPT);
+#endif
+
+
+ if (saveFileDialog->ShowModal() == wxID_OK)
{
- SetStatusText( _T("Regenerating boxes lists ... please wait") );
- //BBTK_BUSY_CURSOR ;
-
- std::string command;
- #if defined(WIN32)
- command = "\"";
- #endif
- command += ConfigurationFile::GetInstance().Get_bin_path();
- command += ConfigurationFile::GetInstance().Get_file_separator();
- command += "bbRegenerateBoxesLists";
+ wxString fileName = saveFileDialog->GetPath();
+ std::string filename = (const char*) (fileName.mb_str());
+ filename=CheckExtension (filename, ".txt");
- #if defined(WIN32)
- command += "\"";
- #endif
- command += " -q";
+ ofstream file;
+ file.open(filename.c_str());
- bbtkMessage("debug",1,"Executing system command '"<<command<<"'"<<std::endl);
+ std::vector<std::string> extInputs = _tabsMgr->getActualTabPanel()->getSceneManager()->GetExternalInputsNames();
- if ( ! system ( command.c_str() ) )
+ //TODO PUT IN A METHOD OF A FILES AND TEXT MANAGER CLASS !!!
+ //std::string inputsInCommentsWin="";
+ //std::string inputsInCommentsUnix="";
+ //std::string inputsInOneLineWin="";
+ std::string inputsInOneLineUnix="";
+ for (unsigned int i = 0; i < extInputs.size(); ++i)
{
- SetStatusText( _T("Done !"));
- /*
- wxMessageBox(_T("Done !"),_T("Regenerate boxes lists"),
- wxOK | wxICON_INFORMATION);
+ /* No gusto la idea al jefe pero por si acaso ...
+ * RaC 2012 2nd HackFest
+ *
+ inputsInCommentsWin+="REM ";
+ inputsInCommentsWin+=extInputs[i];
+ inputsInCommentsWin+="=\"value\"\n";
+ inputsInCommentsUnix+="# ";
+ inputsInCommentsUnix+=extInputs[i];
+ inputsInCommentsUnix+="=\"value\"\n";
+
+ char buffer [50];
+ sprintf (buffer, "%d", (i+1));
+ inputsInOneLineWin+=extInputs[i];
+ inputsInOneLineWin+="=\"%";
+ inputsInOneLineWin+=buffer;
+ inputsInOneLineWin+="\" ";
*/
+ inputsInOneLineUnix+=extInputs[i];
+ inputsInOneLineUnix+="=\"<value>\" ";
+
}
- else
- {
- SetStatusText( _T("Done !"));
- wxString err(_T("An error occured while running '"));
- err += bbtk::std2wx(command) + _T("'");
- wxMessageBox(err,_T("Regenerate boxes lists"),wxOK | wxICON_ERROR);
- }
- }
-
- //================================================================
- void wxGUIEditorGraphicBBS::RegenerateAll()
- {
- DoRegeneratePackageDoc("-a");
- DoRegenerateBoxesLists();
+
+
+ std::string content = "";
+ // writing file header
+ content += "# ----------------------------------\n";
+ content += "# - BBTKGEditor v ";
+ content += _currentBBGversion; //VERSION
+ content += " Console Commands to execute BBS application\n";
+ content += "# - ";
+ content += filename;
+ content += "\n";
+ content += "# ----------------------------------\n";
+ content += "\n";
+ content += "\n";
+ content += "# Command to execute bbi\n";
+ content += "bbi <bbs_path> ";
+ content += inputsInOneLineUnix;
+
+ /* No gusto la idea al jefe pero por si acaso ...
+ * RaC 2012 2nd HackFest
+ content += "# For Windows (copy the following lines to a .bat file)\n";
+ content += "REM BBS application\n";
+ content += "REM Inputs:\n";
+ content += inputsInCommentsWin;
+ content += "REM To use previous inputs, put %$inputName% in the corresponding input of the execution bbi line\n";
+ content += "bbi applicationBBS.bbs ";
+ content += inputsInOneLineWin;
+ content += "\n";
+ content += "\n";
+ content += "# For Linux or Mac (copy the following lines to a .sh file)\n";
+ content += "#!/bin/bash\n";
+ content += "# BBS application\n";
+ content += "# Inputs:\n";
+ content += inputsInCommentsUnix;
+ content += "# To use previous inputs, put $inputName in the corresponding input of the execution bbi line\n";
+ content += "bbi applicationBBS.bbs ";
+ content += inputsInOneLineUnix;
+ content += "\n";
+ */
+
+ file << content;
+ file.close();
}
- //================================================================
- wxAuiNotebook* wxGUIEditorGraphicBBS::getAuiNotebook()
+}
+
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::refreshGUIControls()
+{
+ std::string stundo;
+ std::string stredo;
+ //RaC2012 2ndHackFest Next line seems weird ... To keep in mind for other devels
+ wxToolBar* toolbar = GetToolBar();
+ if (_tabsMgr->isActualDiagramComplexBox())
{
- return _notebook;
+ toolbar->ToggleTool(ID_BTNCOMPLEXBOX, true);
+ //toolbar->EnableTool(ID_ADDCOMPLEXBOXINPUT, true); RaC2012 2nd HackFest
+ toolbar->EnableTool(ID_ADDCOMPLEXBOXOUTPUT, true);
+
+ GetMenuBar()->GetMenu(0)->Enable(ID_SAVE_AS_COMPLEXBOX, true);
+ GetMenuBar()->GetMenu(0)->Enable(ID_SAVE_AS_BBS, false);
+ GetMenuBar()->GetMenu(0)->Enable(ID_EXPORT_CONSOLEAPP, false);
+ } else {
+ toolbar->ToggleTool(ID_BTNCOMPLEXBOX, false);
+ //toolbar->EnableTool(ID_ADDCOMPLEXBOXINPUT, false); RaC2012 2nd HackFest
+ toolbar->EnableTool(ID_ADDCOMPLEXBOXOUTPUT, false);
+
+ GetMenuBar()->GetMenu(0)->Enable(ID_SAVE_AS_COMPLEXBOX, false);
+ GetMenuBar()->GetMenu(0)->Enable(ID_SAVE_AS_BBS, true);
+ GetMenuBar()->GetMenu(0)->Enable(ID_EXPORT_CONSOLEAPP, true);
}
- //================================================================
+ //RaC2012 2ndHackFest
+ GetToolBar()->EnableTool(ID_EDITPROPERTIES,true);
- void wxGUIEditorGraphicBBS::displayBlackBoxInfo(std::string packageName, std::string boxName)
- {
- if(_actualPkgBrowserPkgName != packageName || _actualPkgBrowserBoxName != boxName )
- {
- _actualPkgBrowserPkgName = packageName;
- _actualPkgBrowserBoxName = boxName;
+ GetToolBar()->EnableTool(ID_UNDO,_tabsMgr->getUndoState(stundo));
+ GetToolBar()->SetToolShortHelp(ID_UNDO,crea::std2wx(stundo));
+ GetToolBar()->EnableTool(ID_REDO,_tabsMgr->getRedoState(stredo));
+ GetToolBar()->SetToolShortHelp(ID_REDO,crea::std2wx(stredo));
- BlackBoxDescriptor::Pointer descriptor = GObjectsMVCFactory::getInstance()->getBlackBoxDescriptor(packageName, boxName);
- _pkgBrowser->WxGUIBlackBoxListUserOnSelected(descriptor.get());
- }
+ if (_tabsMgr->getNumActualSelectedObjects() > 0) {
+ GetMenuBar()->GetMenu(1)->Enable(ID_COPY_TO_COMPLEXDIAGRAM, true);
+ } else {
+ ///TODO Fix the possibility to say from the SceneManager to the GUI to refresh the options
+ GetMenuBar()->GetMenu(1)->Enable(ID_COPY_TO_COMPLEXDIAGRAM, true);
}
- //=========================================================================
+}
+
+//=========================================================================
- void wxGUIEditorGraphicBBS::editBlackBox(GBlackBoxModel *bbmodel)
+void wxGUIEditorGraphicBBS::OnDeleteAllBoxesActualDiagram(wxCommandEvent& event)
+{
+ wxMessageDialog *dial = new wxMessageDialog(NULL,wxT("Are you sure to delete all boxes of the diagram?"),wxT("Delete all boxes"), wxYES_NO | wxNO_DEFAULT| wxICON_QUESTION);
+ if (dial->ShowModal() == wxID_YES)
{
- wxBlackBoxEditionDialog* dialog = new wxBlackBoxEditionDialog(this,bbmodel);
- dialog->Show();
+ _tabsMgr->deleteAllBoxesActualDiagram();
}
+}
- //=========================================================================
+//=========================================================================
- void wxGUIEditorGraphicBBS::editDiagramParameters(wxVtkSceneManager* scene)
+void wxGUIEditorGraphicBBS::OnCenterViewActualDiagram(wxCommandEvent& event)
+{
+ _tabsMgr->centerViewActualDiagram();
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OpenDiagram(std::string filePathName, std::string fileName)
+{
+ ifstream inputStream;
+ inputStream.open(filePathName.c_str());
+ assert(inputStream.good()); // fails
+
+ if(_tabsMgr->FindTab(filePathName)!=-1) //RaC2012 avoid opening same diagram twice
{
- wxBlackBoxEditionDialog* dialog = new wxBlackBoxEditionDialog(this,scene);
- dialog->Show();
+ inputStream.close();
+ printf("RaC: Diagram already opened\n");
+ return;
}
+ _tabsMgr->addNewTab( crea::std2wx(fileName) );
+ _tabsMgr->loadDiagram(inputStream, filePathName);
+
+ _tabsMgr->saveTempActualDiagram("load diagram");
+ GetToolBar()->EnableTool(ID_UNDO, false);
+ GetToolBar()->EnableTool(ID_UNDO, false);
+ inputStream.close();
+ refreshGUIControls();
+}
+
+//=========================================================================
- //=========================================================================
+void wxGUIEditorGraphicBBS::OnOpenDiagram(wxCommandEvent& event)
+{
+
+//EED 2017-09-16 Migration wxWidgets 2.8 to 3.0
+#if wxMAJOR_VERSION <= 2
+ wxFileDialog * openFileDialog = new wxFileDialog(this, wxT("Open diagram"), wxEmptyString, wxT(""), wxT("*.bbg"), wxOPEN | wxFILE_MUST_EXIST);
+#else
+ wxFileDialog * openFileDialog = new wxFileDialog(this, wxT("Open diagram"), wxEmptyString, wxT(""), wxT("*.bbg"), wxFD_OPEN | wxFD_FILE_MUST_EXIST);
+#endif
- void wxGUIEditorGraphicBBS::updateStatusBar(std::string textStatus)
+ if (openFileDialog->ShowModal() == wxID_OK)
{
- SetStatusText(crea::std2wx(textStatus));
+ wxString filePath = openFileDialog->GetPath();
+ wxString fileName = openFileDialog->GetFilename();
+ OpenDiagram( crea::wx2std(filePath) , crea::wx2std(fileName) );
}
+}
- //=========================================================================
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnClickBtnBox(wxCommandEvent& event)
+{
+ std::cout<<"wxGUIEditorGraphicBBS::OnClickBtnBox"<<std::endl;
+ BlackBoxDescriptor *bbDes = _pkgBrowser->GetActualSelected();
+ if (bbDes != NULL) {
+ std::string typeName = bbDes->GetTypeName();
+ std::string packageName = bbDes->GetPackage()->GetName();
+ wxGEditorTabPanel *pnl = this->_tabsMgr->getActualTabPanel();
+ if (pnl != NULL) {
+ wxVtkSceneManager *scn = pnl->getSceneManager();
+ scn->createGBlackBox(50, 50, packageName, typeName);
+ scn->refresh();
+ }
+ SaveTempActualDiagram("New Box");
+ // if pnl
+ }// if bbDes
+}
- void wxGUIEditorGraphicBBS::executeScript(std::string script)
- {
- std::string separator = ConfigurationFile::GetInstance().Get_file_separator ();
- std::string dir = ConfigurationFile::GetInstance().Get_default_temp_dir();
- std::string filename = dir + separator + "tmp_bbtk.bbs";
-
- ofstream tempFile;
- tempFile.open(filename.c_str());
- tempFile << script;
- tempFile.close();
-
- std::string command = "\"";
-
- #ifdef WIN32
- command += "\"";
- #endif
-
- //command += ConfigurationFile::GetInstance().Get_bin_path();
- command +="C:/temp/bbtkBIN/RelWithDebInfo//";
-
- #ifdef MACOSX
- command += separator + "bbi.app/Contents/MacOS/bbi\" ";
- #else
- command += separator + "bbi\" ";
- #endif
- command += "\""+filename + "\"";
-
- #ifdef WIN32
- command += "\"";
- #endif
-
- command += " & ";
-
- printf ("RaC wxGUIEditorGraphicBBS::executeScript %s \n" , command.c_str() );
- system( command.c_str() );
- }
+//=========================================================================
- //=========================================================================
- // EVENT HANDLERS
- //=========================================================================
+void wxGUIEditorGraphicBBS::OnClickBtnExecutableBox(wxCommandEvent& event)
+{
+ //DFCH
+ wxGEditorTabPanel *pnl = this->_tabsMgr->getActualTabPanel();
- void wxGUIEditorGraphicBBS::OnCreateNewTab(wxCommandEvent& event)
- {
- _tabsMgr->addNewTab();
+ if (pnl != NULL) {
+ wxVtkSceneManager *scn = pnl->getSceneManager();
+ if( scn->MakeBoxExecutable() )
+ std::cout<<"DFCH: wxGUIEditorGraphicBBS::OnClickBtnExecutableBox...successful"<<std::endl;
+ else
+ std::cout<<"DFCH: wxGUIEditorGraphicBBS::OnClickBtnExecutableBox...Error!!"<<std::endl;
}
+ //DFCH
- //=========================================================================
-
- void wxGUIEditorGraphicBBS::OnExecuteActualDiagram(wxCommandEvent& event)
- {
- std::string script = _tabsMgr->getActualDiagramScript();
- cout<<"RaC wxGUIEditorGraphicBBS::executeActualDiagram SCRIPT"<<endl;
- cout<<script<<endl;
+}
- executeScript(script);
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnClickBtnComplexBox(wxCommandEvent& event)
+{
+ std::cout<<"wxGUIEditorGraphicBBS::OnClickBtnComplexBox"<<std::endl;
+ wxToolBar* toolbar = GetToolBar();
+ bool temp = toolbar->GetToolState(ID_BTNCOMPLEXBOX);
+ if (temp) {
+ enableComplexBox();
+ } else {
+ disableComplexBox();
}
+}
- //=========================================================================
+//=========================================================================
+//EED01
+void wxGUIEditorGraphicBBS::OnAddComplexBoxInput(wxCommandEvent& event)
+{
+ wxTextEntryDialog *nameDialog = new wxTextEntryDialog(this,
+ wxT("Name of input port"));
+ if (nameDialog->ShowModal() == wxID_OK)
+ {
+ wxString fileName = nameDialog->GetValue();
+ if (!fileName.IsEmpty())
+ {
+ std::string portName = (const char*) (fileName.mb_str());
+ if ( !boxNameExists(portName) )
+ {
+ _tabsMgr->addActualDiagramComplexInputPort(portName);
+ } else {
+ wxMessageDialog *dial = new wxMessageDialog(NULL,
+ wxT("Impossible to create Box. The name already exists. Please provide another name"),
+ wxT("Change name: name already exists"), wxOK | wxICON_EXCLAMATION | wxSTAY_ON_TOP);
+ dial->ShowModal();
+ }
+ } // if !fileName
+ } // if namaDialog
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnAddComplexBoxOutput(wxCommandEvent& event)
+{
+ wxTextEntryDialog *nameDialog = new wxTextEntryDialog(this,
+ wxT("Name of output port"));
+ if (nameDialog->ShowModal() == wxID_OK)
+ {
+ wxString fileName = nameDialog->GetValue();
+ if (!fileName.IsEmpty())
+ {
+ std::string portName = (const char*) (fileName.mb_str());
+ if ( !boxNameExists(portName) )
+ {
+ _tabsMgr->addActualDiagramComplexOutputPort(portName);
+ } else {
+ wxMessageDialog *dial = new wxMessageDialog(NULL,
+ wxT("Impossible to create Box. The name already exists. Please provide another name"),
+ wxT("Change name: name already exists"), wxOK | wxICON_EXCLAMATION | wxSTAY_ON_TOP);
+ dial->ShowModal();
+ }
+
+ } // if !filename
+ } // namaDialog
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnCopySelectedToComplexDiagram(
+ wxCommandEvent& event)
+{
+ _tabsMgr->copySelectedBBoxesToComplexDiagram();
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnHelpBBeditor(wxCommandEvent& event)
+{
+ printf("wxGUIEditorGraphicBBS::OnHelpBBeditor ....not implemented..\n");
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnCreatePackage(wxCommandEvent& event)
+{
+ bbtkSystemTools::CreatePackage();
+}
- void wxGUIEditorGraphicBBS::OnSaveActualDiagram(wxCommandEvent& event)
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnCreateBlackBox(wxCommandEvent& event)
+{
+ bbtkSystemTools::CreateBlackBox();
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnPlugPackage(wxCommandEvent& event)
+{
+ //DFGO2012 Plug Package functionnalities
+ long style = wxDD_DEFAULT_STYLE | wxDD_DIR_MUST_EXIST;
+ wxDirDialog* FD =
+ new wxDirDialog( 0,
+ _T("Select package directory"),
+ _T(""),
+ style);
+ long userResponse;
+ do
{
+ userResponse = FD->ShowModal();
+ if(userResponse==wxID_OK)
+ {
+ std::string path = wx2std (FD->GetPath()) ;
+ #ifdef WIN32
+ std::string fname = path + "\\bbtkPackage";
+ #else
+ std::string fname = path + "/bbtkPackage";
+ #endif
- }
+ std::cout << "Path chosen = \"" << FD->GetPath() << "\"" << std::endl;
+ if ( Utilities::FileExists( fname ) )
+ {
+ std::ifstream f;
+ f.open(fname.c_str());
+ std::string pname;
+ f >> pname;
+ while(pname[0] == '#')
+ {
+ getline(f, pname, '\n');
+ f >> pname;
+ }
+ f.close();
+
+ bbtk::ConfigurationFile::GetInstance().AddPackagePathsAndWrite( path );
+
+ DoRegeneratePackageDoc(pname);
+ DoRegenerateBoxesLists();
+
+ _pkgBrowser->RebuildList();
+
+ wxMessageBox(_T("Package successfully plugged. Please restart bbEditor to see the new package in the package browser."),_T("Plug package"),wxOK | wxICON_INFORMATION);
+ userResponse = wxID_CANCEL;
+ }
+ else
+ {
+ std::string err = "The directory \"" + path + "\" does not contain a 'bbtkPackage' file.";
+ #ifndef WIN32
+ #ifndef MACOSX
+ err += "\nNote: If you are on Linux please select the folder and click \"Open\", don't enter in it.";
+ #endif
+ #endif
+
+ wxMessageBox(crea::std2wx(err), _T("Plug package"),wxOK | wxICON_ERROR);
+ // THE FOLLOWING LINE GIVES ERRORS BECAUSE IT IS NECESSARY TO USE std2wx
+ //wxMessageBox( _T( err) , _T("Plug package"),wxOK | wxICON_ERROR);
+ }
+ }
+ }while(userResponse != wxID_CANCEL);
- //=========================================================================
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnEditConfig(wxCommandEvent& event)
+{
+ std::string commandStr;
+ std::string configFile = ConfigurationFile::GetInstance().Get_config_xml_full_path();
+ #ifdef WIN32
+ commandStr = "notepad.exe ";
+ #else
+ commandStr = "gedit ";
+ #endif
+ commandStr = commandStr + configFile;
+ std::cout << "system: " << commandStr << std::endl;
+ system ( commandStr.c_str() );
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnShowHTMLDoc(wxCommandEvent& event)
+{
+ // JGRR & CM WH
+ if (_helpHtmlBrowser != NULL){
+ _frameAUIMgr->DetachPane(_helpHtmlBrowser);
+ _helpHtmlBrowser->Destroy();
+ }
+ initHelpHTMLBrowser();
+ _frameAUIMgr->AddPane(_helpHtmlBrowser, wxAuiPaneInfo().Right().MinSize(200, 200));
+ _frameAUIMgr->Update();
+ refreshGUIControls();
+
+ // EO JGRR & CM WH
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnCreateIndex(wxCommandEvent& event)
+{
+ printf("EED wxGUIEditorGraphicBBS::OnCreateIndex ... not implemented ..\n");
+}
- void wxGUIEditorGraphicBBS::OnDeleteAllBoxesActualDiagram(wxCommandEvent& event)
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnEditComplexBoxScript(wxCommandEvent& event)
+{
+ BlackBoxDescriptor *bbDes = _pkgBrowser->GetActualSelected();
+ if (bbDes != NULL)
{
- wxMessageDialog *dial = new wxMessageDialog(NULL, wxT("Are you sure to delete all boxes of the diagram?"), wxT("Delete all boxes"), wxYES_NO | wxNO_DEFAULT | wxICON_QUESTION);
- if(dial->ShowModal() == wxID_YES)
+ std::string packageName = bbDes->GetPackage()->GetName();
+ std::string typeName = bbDes->GetTypeName();
+ if (!TryToOpenScriptComplexBox(packageName ,typeName))
{
- _tabsMgr->deleteAllBoxesActualDiagram();
+ wxMessageDialog windowMessage1(NULL,_T("This is not a ComplexBox script."), _T("Alert !"), wxOK);
+ windowMessage1.ShowModal();
}
- }
+ }// if bbDes
+}
- //=========================================================================
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnExit(wxCommandEvent& event)
+{
+ Close(true);
+}
- void wxGUIEditorGraphicBBS::OnCenterViewActualDiagram(wxCommandEvent& event)
+Factory::Pointer wxGUIEditorGraphicBBS::GetBBTKFactory()
+{
+ if (_pkgBrowser==NULL)
{
- _tabsMgr->centerViewActualDiagram();
+ printf ("EED ERROR! wxGUIEditorGraphicBBS::GetBBTKFactory _pkgBrowser = NULL\n");
}
+ return _pkgBrowser->GetFactory();
+}
- //=========================================================================
+//=========================================================================
+void wxGUIEditorGraphicBBS::enableComplexBox()
+{
+ _tabsMgr->setActualDiagramComplexBox(true);
+ refreshGUIControls();
+}
- void wxGUIEditorGraphicBBS::OnExit(wxCommandEvent& event)
- {
- Close(true);
- }
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::disableComplexBox()
+{
+ _tabsMgr->setActualDiagramComplexBox(false);
+ refreshGUIControls();
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::setCurrentDiagramDescription(std::string description)
+{
+ _tabsMgr->SetDescription(description);
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::setCurrentDiagramAuthor(std::string author)
+{
+ _tabsMgr->SetAuthor(author);
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::setCurrentDiagramCategory(std::string category)
+{
+ _tabsMgr->SetCategory(category);
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::setCurrentDiagramMessageKind(std::string kind){
+ _tabsMgr->SetMessageKind(kind);
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::setCurrentDiagramMessageLevel(std::string level){
+ _tabsMgr->SetMessageLevel(level);
+}
+
+//=========================================================================
+std::string wxGUIEditorGraphicBBS::getCurrentDiagramDescription()
+{
+ return _tabsMgr->GetDescription();
+}
+
+//=========================================================================
+std::string wxGUIEditorGraphicBBS::getCurrentDiagramAuthor()
+{
+ return _tabsMgr->GetAuthor();
+}
+//=========================================================================
+std::string wxGUIEditorGraphicBBS::getCurrentDiagramCategory()
+{
+ return _tabsMgr->GetCategory();
+}
+
+//=========================================================================
+std::string wxGUIEditorGraphicBBS::getCurrentDiagramMessageKind(){
+ return _tabsMgr->GetMessageKind();
+}
+//=========================================================================
+std::string wxGUIEditorGraphicBBS::getCurrentDiagramMessageLevel(){
+ return _tabsMgr->GetMessageLevel();
+}
-} // EO namespace bbtk
+//=========================================================================
+bool wxGUIEditorGraphicBBS::isCurrentDiagramComplexBox()
+{
+ return _tabsMgr->isActualDiagramComplexBox();
+}
+
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OpenScript(std::string filePathNameBBS ,std::string boxType)
+{
+ std::string fileName = boxType+".bbg";
+ std::string filePathNameBBG = filePathNameBBS;
+ filePathNameBBG[ filePathNameBBG.length()-1 ] = 'g';
+
+ wxMessageDialog windowMessage1(NULL,_T("The system is going to open a bbg or bbs for you. Be careful if you save this file."), _T("Alert !"), wxOK);
+ windowMessage1.ShowModal();
+
+ if ( Utilities::FileExists( filePathNameBBG ) )
+ {
+ OpenDiagram( filePathNameBBG , fileName );
+ } else {
+ if ( Utilities::FileExists( filePathNameBBS ) )
+ {
+ OpenBBS( filePathNameBBS , fileName );
+ } else {
+ wxMessageDialog windowMessage1(NULL,_T("..ERROR.. loading script bbg/bbs."), _T("Alert !"), wxOK);
+ windowMessage1.ShowModal();
+ } // FileExists BBS
+ } // FieExists BBG
+} //OpenScript
+
+
+
+//=========================================================================
+bool wxGUIEditorGraphicBBS::TryToOpenScriptApplication(std::string packageName ,std::string boxType)
+{
+ return TryToOpenScript(packageName ,boxType, true, false);
+}
+
+//=========================================================================
+bool wxGUIEditorGraphicBBS::TryToOpenScriptComplexBox(std::string packageName ,std::string boxType)
+{
+ return TryToOpenScript(packageName ,boxType, false, true);
+}
+
+
+//=========================================================================
+bool wxGUIEditorGraphicBBS::TryToOpenScript(std::string packageName ,std::string boxType,bool scriptApplication, bool scriptComplexBox)
+{
+ Package::Pointer k;
+ std::map< std::string, BlackBoxDescriptor::Pointer> mapDesc;
+ BlackBoxDescriptor::Pointer descriptor;
+ k = GetBBTKFactory()->GetPackage(packageName);
+ mapDesc = k->GetDescriptorMap();
+ descriptor = mapDesc[boxType];
+
+ bool result=false;
+ descriptor->IsTypeOfScript_Application();
+ if (descriptor!=NULL)
+ {
+ if (
+ ((descriptor->IsTypeOfScript_Application()==true) && (scriptApplication==true))
+ ||
+ ((descriptor->IsTypeOfScript_ComplexBox()==true) && (scriptComplexBox==true))
+ )
+ {
+ result=true;
+ OpenScript(descriptor->GetScriptFileName(),boxType);
+ } // if descriptor Type
+ } else {
+ printf("EED ERROR wxGUIEditorGraphicBBS::TryToOpenScript >> The descriptor of this box not exists (packageName:%s boxType:%s) this is not normal\n",packageName.c_str(), boxType.c_str() );
+ } // if descriptor NULL
+
+ return result;
+}
+
+} // EO namespace bbtk
// EOF