+/*# ---------------------------------------------------------------------
+#
+# Copyright (c) CREATIS (Centre de Recherche en Acquisition et Traitement de l'Image
+# pour la Sant�)
+# Authors : Eduardo Davila, Frederic Cervenansky, Claire Mouton
+# Previous Authors : Laurent Guigues, Jean-Pierre Roux
+# CreaTools website : www.creatis.insa-lyon.fr/site/fr/creatools_accueil
+#
+# This software is governed by the CeCILL-B license under French law and
+# abiding by the rules of distribution of free software. You can use,
+# modify and/ or redistribute the software under the terms of the CeCILL-B
+# license as circulated by CEA, CNRS and INRIA at the following URL
+# http://www.cecill.info/licences/Licence_CeCILL-B_V1-en.html
+# or in the file LICENSE.txt.
+#
+# As a counterpart to the access to the source code and rights to copy,
+# modify and redistribute granted by the license, users are provided only
+# with a limited warranty and the software's author, the holder of the
+# economic rights, and the successive licensors have only limited
+# liability.
+#
+# The fact that you are presently reading this means that you have had
+# knowledge of the CeCILL-B license and that you accept its terms.
+# ------------------------------------------------------------------------ */
+
#include "manualContourModel.h"
// ----------------------------------------------------------------------------
_cntSplineX = vtkKochanekSpline::New( );
_cntSplineY = vtkKochanekSpline::New( );
_cntSplineZ = vtkKochanekSpline::New( );
-
this->SetCloseContour(true);
-
_cntSplineX->SetDefaultTension( 0 );
_cntSplineX->SetDefaultBias( 0 );
_cntSplineX->SetDefaultContinuity( 0 );
-
_cntSplineY->SetDefaultTension( 0 );
_cntSplineY->SetDefaultBias( 0 );
_cntSplineY->SetDefaultContinuity( 0 );
-
_cntSplineZ->SetDefaultTension( 0 );
_cntSplineZ->SetDefaultBias( 0 );
_cntSplineZ->SetDefaultContinuity( 0 );
-
//JSTG 25-02-08 -------------------------------------------------------------------------------------------------
-
// this parameter is reset in the VIRTUAL manualContourBaseControler::Configure
_sizePointsContour = 100; //JSTG 25-02-08 The change in the inisialization of these variable is critical.
-
_delta_JSTG = 0.0;
//---------------------------------------------------------------------------------------------------------------
-
//CMRU 17-08-09 -------------------------------------------------------------------------------------------------
_realSize = 0.0;
_label = "";
//---------------------------------------------------------------------------------------------------------------
-
}
// ----------------------------------------------------------------------------
delete _lstPoints[i];
}
_lstPoints.clear();
-
_cntSplineX->RemoveAllPoints();
_cntSplineY->RemoveAllPoints();
_cntSplineZ->RemoveAllPoints();
-
_cntSplineX->Delete();
_cntSplineY->Delete();
_cntSplineZ->Delete();
}
+
// ----------------------------------------------------------------------------
int manualContourModel::AddPoint(double x,double y,double z)
{
mp->SetPoint(x,y,z);
AddManualPoint(mp);
//UpdateSpline();
-
return _lstPoints.size()-1;
}
// ----------------------------------------------------------------------------
void manualContourModel::MovePoint(int i,double dx,double dy,double dz)
{
+printf("EED manualContourModel::MovePoint %p \n", this);
manualPoint *mp=_lstPoints[i];
double x=mp->GetX()+dx;
double y=mp->GetY()+dy;
_sizePointsContour = size;
}
-
// ----------------------------------------------------------------------------
void manualContourModel::SetCloseContour(bool closeContour)
_delta_JSTG = (double) (np) / double (_sizePointsContour - 1); //Without the -1 the curve is not close
} else {
// _delta_JSTG = (double) (np-1) / double (_sizePointsContour ); //Without the -1 the curve is not close
- _delta_JSTG = (double) (np) / double (_sizePointsContour-1 ); //Without the -1 the curve is not close
+//EED 9/7/2016 _delta_JSTG = (double) (np) / double (_sizePointsContour-1 ); //Without the -1 the curve is not close
+ _delta_JSTG = (double) (np-1) / double (_sizePointsContour-1 ); //Without the -1 the curve is not close
}
//-----------------------------------------------------------------------------------------------------------
}
//JSTG 25-02-08 ---------------------------------------------------------------
void manualContourModel::GetSpline_t_Point(double t, double *x, double *y, double *z)
{
- if (_lstPoints.size()==0)
+ if (_lstPoints.size()==0)
{
*x = 0;
*y = 0;
}
// ----------------------------------------------------------------------------
-
-
/*void manualContourModel::GetSplinePoint(double t, double &x, double &y, double &z)
{
if (_lstPoints.size()==0)
z = _cntSplineZ->Evaluate(t);
}
}*/
+
// ----------------------------------------------------------------------------
-double manualContourModel::GetPathSize()
+double manualContourModel::GetPathSize(double *spc)
{
double result = 0;
double x1,y1,z1;
double x2,y2,z2;
-
// JSTG 25-02-08 -----------------------------
//double t,delta;
//int i,np,nps;
int i;
//--------------------------------------------
-
if (_lstPoints.size()==2)
{
- x1=_lstPoints[0]->GetX();
- y1=_lstPoints[0]->GetY();
- z1=_lstPoints[0]->GetZ();
- x2=_lstPoints[1]->GetX();
- y2=_lstPoints[1]->GetY();
- z2=_lstPoints[1]->GetZ();
+ x1 = spc[0] * _lstPoints[0]->GetX();
+ y1 = spc[1] * _lstPoints[0]->GetY();
+ z1 = spc[2] * _lstPoints[0]->GetZ();
+ x2 = spc[0] * _lstPoints[1]->GetX();
+ y2 = spc[1] * _lstPoints[1]->GetY();
+ z2 = spc[2] * _lstPoints[1]->GetZ();
result = sqrt( (x2-x1)*(x2-x1) + (y2-y1)*(y2-y1) + (z2-z1)*(z2-z1) );
}
if (_lstPoints.size()>2)
{
-
// JSTG 25-02-08 ------------------------------------------
//np = _lstPoints.size( );
//nps = 200;
UpdateSpline();
//GetSplinePoint(0,x1,y1,z1);
GetSpline_i_Point(0,&x1,&y1,&z1);
-
+ x1 = spc[0] * x1;
+ y1 = spc[1] * y1;
+ z1 = spc[2] * z1;
//for( i = 1; i < nps; i++ )
for( i = 1; i < GetNumberOfPointsSpline(); i++ )
{
//t = delta * (double)i;
//GetSplinePoint(t,x2,y2,z2);
GetSpline_i_Point(i,&x2,&y2,&z2);
+ x2 = spc[0] * x2;
+ y2 = spc[1] * y2;
+ z2 = spc[2] * z2;
//---------------------------------------------------------
result=result + sqrt( (x2-x1)*(x2-x1) + (y2-y1)*(y2-y1) + (z2-z1)*(z2-z1) );
x1=x2;
z1=z2;
}// for
}
-
return result;
}
+
// ----------------------------------------------------------------------------
-double manualContourModel::GetPathArea()
+double manualContourModel::GetPathArea(double *spc)
{
double result = 555;
if ((_lstPoints.size()>=3) && IfCloseContour()==true )
double x2,y2,z2;
bool okArea=true;
int i, j;
-
// This uses Green's theorem:
// A = 1/2 * sum( xiyi+1 - xi+1yi); pO == pN
// A < 0 -> A = |A| (a negative value could raise because points are
GetSpline_i_Point(i,&x1,&y1,&z1);
GetSpline_i_Point(j,&x2,&y2,&z2);
//----------------------------------------------------------------
- area +=
- (x1 * y2 ) -
- ( x2 * y1 );
+ x1=spc[0]*x1;
+ y1=spc[1]*y1;
+ z1=spc[2]*z1;
+ x2=spc[0]*x2;
+ y2=spc[1]*y2;
+ z2=spc[2]*z2;
+ area += (x1 * y2 ) - ( x2 * y1 );
if (z1!=z2)
{
okArea=false;
// p[x,y,z] : data in
// rp[x,y,z] : data out result point
// rn[x,y,z] : data out result normal
-
void manualContourModel::GetNearestPointAndNormal(double *p, double *rp, double *rn)
{
double distMin=999999999;
rn[0] = x2-x1;
rn[1] = y2-y1;
rn[2] = z2-z1;
- }
- x2=x1;
- y2=y1;
- z2=z1;
+ } // if
+ x2 = x1;
+ y2 = y1;
+ z2 = z1;
}// for
-
// JSTG 25-02-08 ------------------------------------------
//if (tback==0)
if (iback==0)
//GetSplinePoint(t,x1,y1,z1);
GetSpline_i_Point(i,&x1,&y1,&z1);
//----------------------------------------------------------
- rn[0]=rp[0]-x1;
- rn[1]=rp[1]-y1;
- rn[2]=rp[2]-z1;
- }
- }
- else
- {
+ rn[0] = rp[0]-x1;
+ rn[1] = rp[1]-y1;
+ rn[2] = rp[2]-z1;
+ } // if iback
+ } else {
rp[0] = 0;
rp[1] = 0;
rp[2] = 0;
rn[0] = -1;
rn[1] = 0;
rn[2] = 0;
- }
+ } // if np
}
// ----------------------------------------------------------------------------
-manualContourModel * manualContourModel :: Clone() // virtual
+manualContourModel * manualContourModel::Clone() // virtual
{
manualContourModel * clone = new manualContourModel();
CopyAttributesTo(clone);