_wxvtk3Dbaseview->GetRenderer()->RemoveActor(actor);
}
-//-------------------------------------------------------------------
-void wxVtkMPR3DView::ResetCamera(int* ext, double* origin,double* spc)
-{
- if(ext == NULL)
- {
-
-//EED 21 mars 2012 FLIP probleme ..PLOP..
-//EED 13 may 2013 FLIP probleme ..PLOP..
- _wxvtk3Dbaseview->GetCamera()->Roll(180);
- _wxvtk3Dbaseview->GetCamera()->Yaw(180+30);
- _wxvtk3Dbaseview->GetCamera()->Pitch(-22);
-
- _wxvtk3Dbaseview->GetRenderer()->ResetCamera ();
- _wxvtk3Dbaseview->GetCamera()->Dolly(2.0);
-
- }else{
-
- /*double x = (spc[0])*(origin[0]+(((double)ext[1]-(double)ext[0])/2.0));
- double y = (spc[1])*(origin[1]+(double)ext[3]);
- double z = (spc[2])*(origin[2]+(((double)ext[5]-(double)ext[4])/2.0));*/
- /*double x0=(spc[0])*((double)ext[0]+origin[0]);
- double x1=(spc[0])*((double)ext[1]+origin[0]);
- double y0=(spc[1])*((double)ext[2]+origin[1]);
- double y1=(spc[1])*((double)ext[3]+origin[1]);
- double z0=(spc[2])*((double)ext[4]+origin[2]);
- double z1=(spc[2])*((double)ext[5]+origin[2]);*/
-
- double x0=(spc[0])*((double)ext[0]);
- double x1=(spc[0])*((double)ext[1]);
- double y0=(spc[1])*((double)ext[2]);
- double y1=(spc[1])*((double)ext[3]);
- double z0=(spc[2])*((double)ext[4]);
- double z1=(spc[2])*((double)ext[5]);
-
- _wxvtk3Dbaseview->GetRenderer()->ResetCamera(x0,x1,y0,y1,z0,z1);
- //_wxvtk3Dbaseview->GetCamera()->SetPosition(x,y,z);
- _wxvtk3Dbaseview->GetCamera()->Dolly(1.5);
- }
-}
+
//-------------------------------------------------------------------
void wxVtkMPR3DView::Configure()
// Actors are added to the renderer.
vtkActor* _outlineActor = _vtkmpr3Ddataviewer->GetOutlineActor();
+
+
_wxvtk3Dbaseview->GetRenderer()->AddActor( _outlineActor );
+
// _wxvtk3Dbaseview->GetRenderer()->AddActor( _vtkmpr3Ddataviewer->GetImageActor(0) ); // _saggital
// _wxvtk3Dbaseview->GetRenderer()->AddActor( _vtkmpr3Ddataviewer->GetImageActor(1) ); // _axial
// _wxvtk3Dbaseview->GetRenderer()->AddActor( _vtkmpr3Ddataviewer->GetImageActor(2) ); // _coronal
// An initial camera view is created. The Dolly() method moves
// the camera towards the FocalPoint, thereby enlarging the image.
- _wxvtk3Dbaseview->GetRenderer()->SetActiveCamera(_wxvtk3Dbaseview->GetCamera());
+// _wxvtk3Dbaseview->GetRenderer()->SetActiveCamera(_wxvtk3Dbaseview->GetCamera());
// Note that when camera movement occurs (as it does in the Dolly()
// method), the clipping planes often need adjusting. Clipping planes
// near plane clips out objects in front of the plane; the far plane
// clips out objects behind the plane. This way only what is drawn
// between the planes is actually rendered.
- _wxvtk3Dbaseview->GetRenderer()->ResetCameraClippingRange();
- this->ResetCamera();
+//EED 27/05/2013
+// _wxvtk3Dbaseview->GetRenderer()->ResetCameraClippingRange();
+//EED 27/05/2013
+// this->ResetCamera();
+ _wxvtk3Dbaseview->ResetCamera();
// Set a background color for the renderer and set the size of the
// render window (expressed in pixels).
_planeWidgetZ->AddObserver(vtkCommand::InteractionEvent, wlipwc );
}
+
+//-------------------------------------------------------------------
+void wxVtkMPR3DView::SetImage()
+{
+ vtkImageData *imageData = GetVtkMPR3DDataViewer()->GetVtkMPRBaseData()->GetImageData();
+ // Orthogonal planes B&W
+ _planeWidgetX->SetInput( imageData );
+ _planeWidgetY->SetInput( imageData );
+ _planeWidgetZ->SetInput( imageData );
+ // -- Plane widget
+ _probe->SetSource( imageData );
+ _vtkmpr3Ddataviewer->SetImage();
+}
+
//-------------------------------------------------------------------
vtkImagePlaneWidget* wxVtkMPR3DView::GetPlaneWidget(unsigned char activationkey, double r, double g, double b, vtkCellPicker* picker)
{
{
if(_planeWidgetX)
{
- if ((plane==1) && (ok==true)) _planeWidgetX->EnabledOn();
- if ((plane==2) && (ok==true)) _planeWidgetY->EnabledOn();
- if ((plane==3) && (ok==true)) _planeWidgetZ->EnabledOn();
+ if (ok==true)
+ {
+//EED 21/07/2013
+// 1. Make backup of actors
+// 2. Putting out all the actors
+// 3. Add vtkImagageActor in first place
+// 4. Putting again the originals actors
+// 5. Refresh
+
+ // step 1, step 2
+ vtkActorCollection *tmpCollection = vtkActorCollection::New();
+ vtkActorCollection *collectionActors = _wxvtk3Dbaseview->GetRenderer()->GetActors();
+ int i,size=collectionActors->GetNumberOfItems();
+ for (i=0; i<size; i++)
+ {
+ tmpCollection->AddItem ( (vtkActor*)collectionActors->GetItemAsObject(0) );
+ _wxvtk3Dbaseview->GetRenderer()->RemoveActor( (vtkProp*)tmpCollection->GetItemAsObject(i) );
+ } // for
+
+ // step 3
+ if ((plane==1) && (ok==true)) _planeWidgetX->EnabledOn();
+ if ((plane==2) && (ok==true)) _planeWidgetY->EnabledOn();
+ if ((plane==3) && (ok==true)) _planeWidgetZ->EnabledOn();
+
+ // step 4
+ for (i=0; i<size; i++)
+ {
+ _wxvtk3Dbaseview->GetRenderer()->AddActor( (vtkProp*)tmpCollection->GetItemAsObject(i) );
+ } // for
+ tmpCollection->Delete();
+
+ // step 5 Refresh
+ _wxvtk3Dbaseview->GetRenderer()->GetRenderWindow()->Render();
+ } // if ok
if ((plane==1) && (ok==false)) _planeWidgetX->EnabledOff();
if ((plane==2) && (ok==false)) _planeWidgetY->EnabledOff();
if ((plane==3) && (ok==false)) _planeWidgetZ->EnabledOff();
- }
+ } // if _planeWidgetX
}
//-------------------------------------------------------------------
//-------------------------------------------------------------------
void wxVtkMPR3DView::Refresh() // virtual
{
- _vtkmpr3Ddataviewer -> Refresh();
+ _vtkmpr3Ddataviewer->Refresh();
if (_wxvtkmpr3DviewCntrlPanel!=NULL)
{
_wxvtkmpr3DviewCntrlPanel->Refresh();
}
-
}
//-------------------------------------------------------------------
double spc[3];
vtkImageData *image = GetVtkMPR3DDataViewer()->GetVtkMPRBaseData()->GetImageData();
- if(image){
+ if(image)
+ {
image->GetSpacing(spc);
}else{
spc[0] = 0;
if ((normal[0]==1)&&(normal[1]==0)&&(normal[2]==0))
{
_planeWidgetX->SetSlicePosition( x*spc[0] );
+//EED 2016/02/19
+// _planeWidgetX->GetReslice()->SetInterpolate( _vtkmpr3Ddataviewer->GetVtkMPRBaseData()->GetInterpolate() );
+ _planeWidgetX->GetTexture()->SetInterpolate( _vtkmpr3Ddataviewer->GetVtkMPRBaseData()->GetInterpolate() );
}
// FreePlaneY
_planeWidgetY->GetNormal(normal);
if ((normal[0]==0)&&(normal[1]==1)&&(normal[2]==0))
{
_planeWidgetY->SetSlicePosition( y*spc[1] );
+//EED 2016/02/19
+ _planeWidgetY->GetReslice()->SetInterpolate( _vtkmpr3Ddataviewer->GetVtkMPRBaseData()->GetInterpolate() );
+ _planeWidgetY->GetTexture()->SetInterpolate( _vtkmpr3Ddataviewer->GetVtkMPRBaseData()->GetInterpolate() );
}
// FreePlaneZ
_planeWidgetZ->GetNormal(normal);
if ((normal[0]==0)&&(normal[1]==0)&&(normal[2]==1))
{
_planeWidgetZ->SetSlicePosition( z*spc[2] );
+//EED 2016/02/19
+ _planeWidgetZ->GetReslice()->SetInterpolate( _vtkmpr3Ddataviewer->GetVtkMPRBaseData()->GetInterpolate() );
+ _planeWidgetZ->GetTexture()->SetInterpolate( _vtkmpr3Ddataviewer->GetVtkMPRBaseData()->GetInterpolate() );
}
x=x*spc[0];
//-------------------------------------------------------------------
wxVtk3DBaseView* wxVtkMPR3DView::GetWxvtk3Dbaseview() throw (char*)
{
- if(_wxvtk3Dbaseview==NULL){
+ if(_wxvtk3Dbaseview==NULL)
+ {
throw "wxVtk3DBaseView* wxVtkMPR3DView::GetWxvtk3Dbaseview() _wxvtk3Dbaseview=NULL";
}
return _wxvtk3Dbaseview;
if (visible==false){
_wxvtk3Dbaseview->GetRenderer()->RemoveActor( _vtkmpr3Ddataviewer->GetImageActor(idPosition) );
} else {
+//EED 21/07/2013
+// 1. Make backup of actors
+// 2. Putting out all the actors
+// 3. Add vtkImagageActor in first place
+// 4. Putting again the originals actors
+// 5. Refresh
+
+//EED 4 nov 2015 (For Estelle)
+// This works in ViewerNV with nTymeView=6
+// Because the others modules (5) generate also more actors with an OutLineFilter -> Actor
+//showOutlineActor(false);
+
+ // step 1, step 2
+ vtkActorCollection *tmpCollection = vtkActorCollection::New();
+ vtkActorCollection *collectionActors = _wxvtk3Dbaseview->GetRenderer()->GetActors();
+ int i,size=collectionActors->GetNumberOfItems();
+ for (i=0; i<size; i++)
+ {
+ printf(" wxVtkMPR3DView::VisibleImageActor %d\n" , i);
+ tmpCollection->AddItem ( (vtkActor*)collectionActors->GetItemAsObject(0) );
+ _wxvtk3Dbaseview->GetRenderer()->RemoveActor( (vtkProp*)tmpCollection->GetItemAsObject(i) );
+ } // for
+
+ // step 3
_wxvtk3Dbaseview->GetRenderer()->AddActor( _vtkmpr3Ddataviewer->GetImageActor(idPosition) );
+
+ // step 4
+ for (i=0; i<size; i++)
+ {
+ _wxvtk3Dbaseview->GetRenderer()->AddActor( (vtkProp*)tmpCollection->GetItemAsObject(i) );
+ } // for
+ tmpCollection->Delete();
+
+ // step 5 Refresh
+ _wxvtk3Dbaseview->GetRenderer()->GetRenderWindow()->Render();
+
}
_vtkmpr3Ddataviewer->SetVisiblePosition(idPosition,visible);
}
//CPR: Method added 30 Nov 2009
void wxVtkMPR3DView::showOutlineActor(bool value)
{
+
vtkActor* _outlineActor = _vtkmpr3Ddataviewer->GetOutlineActor();
if(value == true)
{
{
_wxvtk3Dbaseview->GetRenderer()->RemoveActor( _outlineActor );
}
+
}
//-------------------------------------------------------------------
vtkPlane *slicePlane = vtkPlane::New();
this->_planeWidget->GetPlane( slicePlane );
-
vtkCutter* sliceCutter = vtkCutter::New();
vtkImageData *vtkimagedata = this->GetVtkMPR3DDataViewer()->GetVtkMPRBaseData()->GetImageData();
sliceCutter->SetInput( vtkimagedata );
//EED
// vtkLookupTable *lut = BuildHueWeightBaseMap();
-
vtkPolyDataMapper *slice = vtkPolyDataMapper::New();
slice->SetInput( sliceCutter->GetOutput() );
double range[2];
contourMapper->SetScalarRange( range );
// contourMapper->SetLookupTable( lut );
-
vtkActor *contourActor = vtkActor::New();
contourActor->SetMapper( contourMapper );
-
-
// The usual rendering stuff.
vtkCamera *camera = vtkCamera::New();
camera->SetPosition(1,1,1);
iren->Start();
}
+//-------------------------------------------------------------------
+void wxVtkMPR3DView::SetBackGroundType(int type)
+{
+ if (_wxvtk3Dbaseview!=NULL)
+ {
+ if (type==0)
+ {
+ _wxvtk3Dbaseview->GetRenderer()->GradientBackgroundOff();
+ _wxvtk3Dbaseview->GetRenderer()->SetBackground( 0 , 0 , 0 );
+ } // if type
+ if (type==1)
+ {
+ _wxvtk3Dbaseview->GetRenderer()->GradientBackgroundOn();
+ _wxvtk3Dbaseview->GetRenderer()->SetBackground( 0.33 , 0.33 , 0.33 );
+ _wxvtk3Dbaseview->GetRenderer()->SetBackground2( 0.66 , 0.66 , 0.66 );
+ } // if type
+ _wxvtk3Dbaseview->Refresh();
+ }// if _wxvtk3Dbaseview
+
+}
git://git.creatis.insa-lyon.fr / creaMaracasVisu.git / blobdiff