-
-#include <stdio.h>
+/*=========================================================================
+
+ Program: gdcm
+ Module: $RCSfile: gdcmJpeg.cxx,v $
+ Language: C++
+ Date: $Date: 2005/01/12 19:02:13 $
+ Version: $Revision: 1.31 $
+
+ Copyright (c) CREATIS (Centre de Recherche et d'Applications en Traitement de
+ l'Image). All rights reserved. See Doc/License.txt or
+ http://www.creatis.insa-lyon.fr/Public/Gdcm/License.html for details.
+
+ This software is distributed WITHOUT ANY WARRANTY; without even
+ the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ PURPOSE. See the above copyright notices for more information.
+
+=========================================================================*/
#include "gdcmFile.h"
-#define BITS_IN_JSAMPLE 8
-
-#define DEBUG 0
-
/*
DICOM provides a mechanism for supporting the use of JPEG Image Compression
through the Encapsulated Format (see PS 3.3 of the DICOM Standard).
* You may also wish to include "jerror.h".
*/
-extern "C" {
-#include "jpeglib.h"
#include <setjmp.h>
+#include <fstream>
+#include "jdatasrc.cxx"
+#include "jdatadst.cxx"
+
+namespace gdcm
+{
+/******************** JPEG COMPRESSION SAMPLE INTERFACE *******************/
+
+/* This half of the example shows how to feed data into the JPEG compressor.
+ * We present a minimal version that does not worry about refinements such
+ * as error recovery (the JPEG code will just exit() if it gets an error).
+ */
+
+/*
+ * IMAGE DATA FORMATS:
+ *
+ * The standard input image format is a rectangular array of pixels, with
+ * each pixel having the same number of "component" values (color channels).
+ * Each pixel row is an array of JSAMPLEs (which typically are unsigned chars).
+ * If you are working with color data, then the color values for each pixel
+ * must be adjacent in the row; for example, R,G,B,R,G,B,R,G,B,... for 24-bit
+ * RGB color.
+ *
+ * For this example, we'll assume that this data structure matches the way
+ * our application has stored the image in memory, so we can just pass a
+ * pointer to our image buffer. In particular, let's say that the image is
+ * RGB color and is described by:
+ */
+
+
+//extern JSAMPLE * image_buffer; /* Points to large array of R,G,B-order data */
+//extern int image_height; /* Number of rows in image */
+//extern int image_width; /* Number of columns in image */
+
+
+
+/*
+ * Sample routine for JPEG compression. We assume that the target file name
+ * and a compression quality factor are passed in.
+ */
+
+ /**
+ * \ingroup File
+ * \brief routine for JPEG decompression
+ * @param fp pointer to an already open file descriptor
+ * 8 significant bits per pixel
+ * @param im_buf Points to array (of R,G,B-order) data to compress
+ * @param quality compression quality
+ * @param image_height Number of rows in image
+ * @param image_width Number of columns in image
+ * @return 1 on success, 0 on error
+ */
+
+bool gdcm_write_JPEG_file (std::ofstream* fp, void* im_buf,
+ int image_width, int image_height, int quality)
+{
+
+ JSAMPLE* image_buffer = (JSAMPLE*) im_buf;
+
+ /* This struct contains the JPEG compression parameters and pointers to
+ * working space (which is allocated as needed by the JPEG library).
+ * It is possible to have several such structures, representing multiple
+ * compression/decompression processes, in existence at once. We refer
+ * to any one struct (and its associated working data) as a "JPEG object".
+ */
+ struct jpeg_compress_struct cinfo;
+ /* This struct represents a JPEG error handler. It is declared separately
+ * because applications often want to supply a specialized error handler
+ * (see the second half of this file for an example). But here we just
+ * take the easy way out and use the standard error handler, which will
+ * print a message on stderr and call exit() if compression fails.
+ * Note that this struct must live as long as the main JPEG parameter
+ * struct, to avoid dangling-pointer problems.
+ */
+ struct jpeg_error_mgr jerr;
+ /* More stuff */
+ //FILE* outfile; /* target FILE* /
+ JSAMPROW row_pointer[1]; /* pointer to JSAMPLE row[s] */
+ int row_stride; /* physical row width in image buffer */
+
+ /* Step 1: allocate and initialize JPEG compression object */
+
+ /* We have to set up the error handler first, in case the initialization
+ * step fails. (Unlikely, but it could happen if you are out of memory.)
+ * This routine fills in the contents of struct jerr, and returns jerr's
+ * address which we place into the link field in cinfo.
+ */
+ cinfo.err = jpeg_std_error(&jerr);
+ /* Now we can initialize the JPEG compression object. */
+ jpeg_create_compress(&cinfo);
+
+ /* Step 2: specify data destination (eg, a file) */
+ /* Note: steps 2 and 3 can be done in either order. */
+
+ /* Here we use the library-supplied code to send compressed data to a
+ * stdio stream. You can also write your own code to do something else.
+ * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
+ * requires it in order to write binary files.
+ */
+ // if ((outfile = fopen(filename, "wb")) == NULL) {
+ // fprintf(stderr, "can't open %s\n", filename);
+ // exit(1);
+ //
+ // }
+ jpeg_stdio_dest(&cinfo, fp);
+
+ /* Step 3: set parameters for compression */
+
+ /* First we supply a description of the input image.
+ * Four fields of the cinfo struct must be filled in:
+ */
+ cinfo.image_width = image_width;/* image width and height, in pixels */
+ cinfo.image_height = image_height;
+ cinfo.input_components = 3; /* # of color components per pixel */
+ cinfo.in_color_space = JCS_RGB; /* colorspace of input image */
+ /* Now use the library's routine to set default compression parameters.
+ * (You must set at least cinfo.in_color_space before calling this,
+ * since the defaults depend on the source color space.)
+ */
+ jpeg_set_defaults(&cinfo);
+ /* Now you can set any non-default parameters you wish to.
+ * Here we just illustrate the use of quality (quantization table) scaling:
+ */
+ jpeg_set_quality(&cinfo, quality, TRUE /* limit to baseline-JPEG values */);
+
+ /* Step 4: Start compressor */
+
+ /* TRUE ensures that we will write a complete interchange-JPEG file.
+ * Pass TRUE unless you are very sure of what you're doing.
+ */
+ jpeg_start_compress(&cinfo, TRUE);
+
+ /* Step 5: while (scan lines remain to be written) */
+ /* jpeg_write_scanlines(...); */
+
+ /* Here we use the library's state variable cinfo.next_scanline as the
+ * loop counter, so that we don't have to keep track ourselves.
+ * To keep things simple, we pass one scanline per call; you can pass
+ * more if you wish, though.
+ */
+ row_stride = image_width * 3;/* JSAMPLEs per row in image_buffer */
+
+ while (cinfo.next_scanline < cinfo.image_height) {
+ /* jpeg_write_scanlines expects an array of pointers to scanlines.
+ * Here the array is only one element long, but you could pass
+ * more than one scanline at a time if that's more convenient.
+ */
+ row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride];
+
+ (void) jpeg_write_scanlines(&cinfo, row_pointer, 1);
+ }
+
+ /* Step 6: Finish compression */
+
+ jpeg_finish_compress(&cinfo);
+
+ /* After finish_compress, we can close the output file. */
+
+ // fclose(fp); --> the caller will close (multiframe treatement)
+
+ /* Step 7: release JPEG compression object */
+
+ /* This is an important step since it will release a good deal of memory. */
+ jpeg_destroy_compress(&cinfo);
+
+ /* And we're done! */
+
+ return true; //???
}
+
+
+/*
+ * SOME FINE POINTS:
+ *
+ * In the above loop, we ignored the return value of jpeg_write_scanlines,
+ * which is the number of scanlines actually written. We could get away
+ * with this because we were only relying on the value of cinfo.next_scanline,
+ * which will be incremented correctly. If you maintain additional loop
+ * variables then you should be careful to increment them properly.
+ * Actually, for output to a stdio stream you needn't worry, because
+ * then jpeg_write_scanlines will write all the lines passed (or else exit
+ * with a fatal error). Partial writes can only occur if you use a data
+ * destination module that can demand suspension of the compressor.
+ * (If you don't know what that's for, you don't need it.)
+ *
+ * If the compressor requires full-image buffers (for entropy-coding
+ * optimization or a multi-scan JPEG file), it will create temporary
+ * files for anything that doesn't fit within the maximum-memory setting.
+ * (Note that temp files are NOT needed if you use the default parameters.)
+ * On some systems you may need to set up a signal handler to ensure that
+ * temporary files are deleted if the program is interrupted. See libjpeg.doc.
+ *
+ * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG
+ * files to be compatible with everyone else's. If you cannot readily read
+ * your data in that order, you'll need an intermediate array to hold the
+ * image. See rdtarga.c or rdbmp.c for examples of handling bottom-to-top
+ * source data using the JPEG code's internal virtual-array mechanisms.
+ */
+
+
+
/******************** JPEG DECOMPRESSION SAMPLE INTERFACE *******************/
/* This half of the example shows how to read data from the JPEG decompressor.
* Here's the extended error handler struct:
*/
+//-----------------------------------------------------------------------------
struct my_error_mgr {
- struct jpeg_error_mgr pub; /* "public" fields */
- jmp_buf setjmp_buffer; /* for return to caller */
+ struct jpeg_error_mgr pub; /* "public" fields */
+ jmp_buf setjmp_buffer; /* for return to caller */
};
-typedef struct my_error_mgr * my_error_ptr;
+//-----------------------------------------------------------------------------
+typedef struct my_error_mgr* my_error_ptr;
/*
* Here's the routine that will replace the standard error_exit method:
*/
+METHODDEF(void) my_error_exit (j_common_ptr cinfo) {
+ /* cinfo->err really points to a my_error_mgr struct, so coerce pointer */
+ my_error_ptr myerr = (my_error_ptr) cinfo->err;
-METHODDEF(void)
-my_error_exit (j_common_ptr cinfo) {
- /* cinfo->err really points to a my_error_mgr struct, so coerce pointer */
- my_error_ptr myerr = (my_error_ptr) cinfo->err;
-
- /* Always display the message. */
- /* We could postpone this until after returning, if we chose. */
- (*cinfo->err->output_message) (cinfo);
+ /* Always display the message. */
+ /* We could postpone this until after returning, if we chose. */
+ (*cinfo->err->output_message) (cinfo);
- /* Return control to the setjmp point */
- longjmp(myerr->setjmp_buffer, 1);
+ /* Return control to the setjmp point */
+ longjmp(myerr->setjmp_buffer, 1);
}
-
+//-----------------------------------------------------------------------------
/*
* Sample routine for JPEG decompression. We assume that the source file name
* is passed in. We want to return 1 on success, 0 on error.
*/
-//GLOBAL(bool)
-bool gdcmFile::gdcm_read_JPEG_file (FILE *fp,void * image_buffer) {
-
-char *pimage;
-
- /* This struct contains the JPEG decompression parameters and pointers to
- * working space (which is allocated as needed by the JPEG library).
- */
-
- struct jpeg_decompress_struct cinfo;
+
+ /**
+ * \brief routine for JPEG decompression
+ * @param fp pointer to an already open file descriptor
+ * 8 significant bits per pixel
+ * @param image_buffer to receive uncompressed pixels
+ * @return 1 on success, 0 on error
+ */
+
+bool gdcm_read_JPEG_file ( std::ifstream* fp, void* image_buffer )
+{
+ char* pimage;
+
+ /* This struct contains the JPEG decompression parameters and pointers to
+ * working space (which is allocated as needed by the JPEG library).
+ */
+ struct jpeg_decompress_struct cinfo;
+
+ /* -------------- inside, we found :
+ * JDIMENSION image_width; // input image width
+ * JDIMENSION image_height; // input image height
+ * int input_components; // nb of color components in input image
+ * J_COLOR_SPACE in_color_space; // colorspace of input image
+ * double input_gamma; // image gamma of input image
+ * -------------- */
+
+ /* We use our private extension JPEG error handler.
+ * Note that this struct must live as long as the main JPEG parameter
+ * struct, to avoid dangling-pointer problems.
+ */
+ struct my_error_mgr jerr;
+ /* More stuff */
+
+ JSAMPARRAY buffer;/* Output row buffer */
- /* -------------- inside, we found :
- JDIMENSION image_width; // input image width
- JDIMENSION image_height; // input image height
- int input_components; // nb of color components in input image
- J_COLOR_SPACE in_color_space; // colorspace of input image
- double input_gamma; // image gamma of input image
- -------------- */
+ // rappel :
+ // ------
+ // typedef unsigned char JSAMPLE;
+ // typedef JSAMPLE FAR *JSAMPROW;/* ptr to one image row of pixel samples. */
+ // typedef JSAMPROW *JSAMPARRAY;/* ptr to some rows (a 2-D sample array) */
+ // typedef JSAMPARRAY *JSAMPIMAGE;/* a 3-D sample array: top index is color */
+
+ int row_stride;/* physical row width in output buffer */
- /* We use our private extension JPEG error handler.
- * Note that this struct must live as long as the main JPEG parameter
- * struct, to avoid dangling-pointer problems.
- */
- struct my_error_mgr jerr;
- /* More stuff */
-
- JSAMPARRAY buffer; /* Output row buffer */
+#ifdef GDCM_JPG_DEBUG
+ printf("entree dans File::gdcm_read_JPEG_file (i.e. 8), depuis gdcmJpeg\n");
+#endif //GDCM_JPG_DEBUG
+
+ /* In this example we want to open the input file before doing anything else,
+ * so that the setjmp() error recovery below can assume the file is open.
+ * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
+ * requires it in order to read binary files.
+ */
+
+ /* Step 1: allocate and initialize JPEG decompression object */
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 1\n");
+#endif //GDCM_JPG_DEBUG
- // rappel :
- // ------
- // typedef unsigned char JSAMPLE;
- // typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */
- // typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */
- // typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */
+ /* We set up the normal JPEG error routines, then override error_exit. */
-
- int row_stride; /* physical row width in output buffer */
+ cinfo.err = jpeg_std_error(&jerr.pub);
+ jerr.pub.error_exit = my_error_exit;
- if (DEBUG) printf("entree dans gdcmFile::gdcm_read_JPEG_file, depuis gdcmJpeg\n");
+ /* Establish the setjmp return context for my_error_exit to use. */
+ if (setjmp(jerr.setjmp_buffer))
+ {
+ /* If we get here, the JPEG code has signaled an error.
+ * We need to clean up the JPEG object, close the input file, and return.
+ */
+ jpeg_destroy_decompress(&cinfo);
+ return 0;
+ }
+ /* Now we can initialize the JPEG decompression object. */
+ jpeg_create_decompress(&cinfo);
+ /* Step 2: specify data source (eg, a file) */
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 2\n");
+#endif //GDCM_JPG_DEBUG
- /* In this example we want to open the input file before doing anything else,
- * so that the setjmp() error recovery below can assume the file is open.
- * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
- * requires it in order to read binary files.
- */
+ jpeg_stdio_src(&cinfo, fp);
+
+ /* Step 3: read file parameters with jpeg_read_header() */
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 3\n");
+#endif //GDCM_JPG_DEBUG
- /* Step 1: allocate and initialize JPEG decompression object */
+ (void) jpeg_read_header(&cinfo, TRUE);
+
+ /* We can ignore the return value from jpeg_read_header since
+ * (a) suspension is not possible with the stdio data source, and
+ * (b) we passed TRUE to reject a tables-only JPEG file as an error.
+ * See libjpeg.doc for more info.
+ */
+
+ // prevent the library from performing any color space conversion
+ if( cinfo.process == JPROC_LOSSLESS )
+ {
+ cinfo.jpeg_color_space = JCS_UNKNOWN;
+ cinfo.out_color_space = JCS_UNKNOWN;
+ }
+
+
+#ifdef GDCM_JPG_DEBUG
+ printf("--------------Header contents :----------------\n");
+ printf("image_width %d image_height %d\n",
+ cinfo.image_width , cinfo.image_height);
+ printf("bits of precision in image data %d \n",
+ cinfo.output_components);
+ printf("nb of color components returned %d \n",
+ cinfo.data_precision);
+#endif //GDCM_JPG_DEBUG
+
+
+ /*
+ * JDIMENSION image_width; // input image width
+ * JDIMENSION image_height; // input image height
+ * int output_components; // # of color components returned
+ * J_COLOR_SPACE in_color_space; // colorspace of input image
+ * double input_gamma; // image gamma of input image
+ * int data_precision; // bits of precision in image data
+ */
+
+ /* Step 4: set parameters for decompression */
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 4\n");
+#endif //GDCM_JPG_DEBUG
+ /* In this example, we don't need to change any of the defaults set by
+ * jpeg_read_header(), so we do nothing here.
+ */
+
+ /* Step 5: Start decompressor */
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 5\n");
+#endif //GDCM_JPG_DEBUG
+
+ (void) jpeg_start_decompress(&cinfo);
+ /* We can ignore the return value since suspension is not possible
+ * with the stdio data source.
+ */
+
+ /* We may need to do some setup of our own at this point before reading
+ * the data. After jpeg_start_decompress() we have the correct scaled
+ * output image dimensions available, as well as the output colormap
+ * if we asked for color quantization.
+ * In this example, we need to make an output work buffer of the right size.
+ */
+
+ /* JSAMPLEs per row in output buffer */
+ row_stride = cinfo.output_width * cinfo.output_components*2;
+
+#ifdef GDCM_JPG_DEBUG
+ printf ("cinfo.output_width %d cinfo.output_components %d row_stride %d\n",
+ cinfo.output_width, cinfo.output_components,row_stride);
+#endif //GDCM_JPG_DEBUG
+
+ /* Make a one-row-high sample array that will go away when done with image */
+ buffer = (*cinfo.mem->alloc_sarray)
+ ((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1);
+
+ /* Step 6: while (scan lines remain to be read) */
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 6\n");
+#endif //GDCM_JPG_DEBUG
+ /* jpeg_read_scanlines(...); */
+
+ /* Here we use the library's state variable cinfo.output_scanline as the
+ * loop counter, so that we don't have to keep track ourselves.
+ */
+#ifdef GDCM_JPG_DEBUG
+ printf ("cinfo.output_height %d cinfo.output_width %d\n",
+ cinfo.output_height,cinfo.output_width);
+#endif //GDCM_JPG_DEBUG
+ pimage=(char *)image_buffer;
- if (DEBUG)printf("Entree Step 1\n");
+ int bufsize = cinfo.output_width * cinfo.output_components;
+ size_t rowsize = bufsize * sizeof(JSAMPLE);
+
+ while (cinfo.output_scanline < cinfo.output_height) {
+ /* jpeg_read_scanlines expects an array of pointers to scanlines.
+ * Here the array is only one element long, but you could ask for
+ * more than one scanline at a time if that's more convenient.
+ */
+
+ //printf( "scanlines: %d\n",cinfo.output_scanline);
+ (void) jpeg_read_scanlines(&cinfo, buffer, 1);
+// The ijg has no notion of big endian, therefore always swap the jpeg stream
+#if defined(GDCM_WORDS_BIGENDIAN) && (CMAKE_BITS_IN_JSAMPLE != 8)
+ uint16_t *buffer16 = (uint16_t*)*buffer;
+ uint16_t *pimage16 = (uint16_t*)pimage;
+ for(int i=0;i<rowsize/2;i++)
+ pimage16[i] = (buffer16[i] >> 8) | (buffer16[i] << 8 );
+#else
+ memcpy( pimage, *buffer,rowsize);
+#endif //GDCM_WORDS_BIGENDIAN
+ pimage+=rowsize;
+ }
+
+ /* Step 7: Finish decompression */
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 7\n");
+#endif //GDCM_JPG_DEBUG
+
+ (void) jpeg_finish_decompress(&cinfo);
+
+ /* We can ignore the return value since suspension is not possible
+ * with the stdio data source.
+ */
+
+ /* Step 8: Release JPEG decompression object */
+
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 8\n");
+#endif //GDCM_JPG_DEBUG
+
+ /* This is an important step since it will release a good deal of memory. */
+
+ jpeg_destroy_decompress(&cinfo);
+
+ /* After finish_decompress, we can close the input file.
+ * Here we postpone it until after no more JPEG errors are possible,
+ * so as to simplify the setjmp error logic above. (Actually, I don't
+ * think that jpeg_destroy can do an error exit, but why assume anything...)
+ */
+
+ /* At this point you may want to check to see whether any corrupt-data
+ * warnings occurred (test whether jerr.pub.num_warnings is nonzero).
+ */
+
+ /* And we're done! */
+
+ return true;
+}
+
+/*
+ * SOME FINE POINTS:
+ *
+ * In the above code, we ignored the return value of jpeg_read_scanlines,
+ * which is the number of scanlines actually read. We could get away with
+ * this because we asked for only one line at a time and we weren't using
+ * a suspending data source. See libjpeg.doc for more info.
+ *
+ * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress();
+ * we should have done it beforehand to ensure that the space would be
+ * counted against the JPEG max_memory setting. In some systems the above
+ * code would risk an out-of-memory error. However, in general we don't
+ * know the output image dimensions before jpeg_start_decompress(), unless we
+ * call jpeg_calc_output_dimensions(). See libjpeg.doc for more about this.
+ *
+ * Scanlines are returned in the same order as they appear in the JPEG file,
+ * which is standardly top-to-bottom. If you must emit data bottom-to-top,
+ * you can use one of the virtual arrays provided by the JPEG memory manager
+ * to invert the data. See wrbmp.c for an example.
+ *
+ * As with compression, some operating modes may require temporary files.
+ * On some systems you may need to set up a signal handler to ensure that
+ * temporary files are deleted if the program is interrupted. See libjpeg.doc.
+ */
+
+//----------------------------------------------------------------------------
+
+
+/**
+ * \brief routine for JPEG decompression from a memory buffer.
+ * routine for JPEG decompression from a memory buffer. This routine
+ * only reads one JPEG image at a time, but returns information about
+ * how many bytes have been consumed from the \c input_buffer, and
+ * how many bytes have been written into the output \c image_buffer.
+ *
+ * @param input_buffer pointer to a memory buffer containing the jpeg
+ * compressed data.
+ * @param buflen length of the memory buffer.
+ * @param image_buffer pointer to the location where the decompressed
+ * image will be filled.
+ * @param howManyRead returns how many bytes have been consumed from the
+ * input_buffer.
+ * @param howManyWritten returns how many bytes have been written into
+ * the output image_buffer.
+ * @return 1 on success, 0 on error
+ */
+
+bool gdcm_read_JPEG_memory ( const JOCTET* input_buffer, const size_t buflen,
+ void* image_buffer,
+ size_t *howManyRead, size_t *howManyWritten)
+{
+ char* pimage=(char *)image_buffer;
+ JOCTET* input = (JOCTET*) input_buffer;
+
+ /* This struct contains the JPEG decompression parameters and pointers to
+ * working space (which is allocated as needed by the JPEG library).
+ */
+ struct jpeg_decompress_struct cinfo;
+
+ /* -------------- inside, we found :
+ * JDIMENSION image_width; // input image width
+ * JDIMENSION image_height; // input image height
+ * int input_components; // nb of color components in input image
+ * J_COLOR_SPACE in_color_space; // colorspace of input image
+ * double input_gamma; // image gamma of input image
+ * -------------- */
+
+ /* We use our private extension JPEG error handler.
+ * Note that this struct must live as long as the main JPEG parameter
+ * struct, to avoid dangling-pointer problems.
+ */
+ struct my_error_mgr jerr;
+ /* More stuff */
+
+ JSAMPARRAY buffer;/* Output row buffer */
+
+ // rappel :
+ // ------
+ // typedef unsigned char JSAMPLE;
+ // typedef JSAMPLE FAR *JSAMPROW;/* ptr to one image row of pixel samples. */
+ // typedef JSAMPROW *JSAMPARRAY;/* ptr to some rows (a 2-D sample array) */
+ // typedef JSAMPARRAY *JSAMPIMAGE;/* a 3-D sample array: top index is color */
+
+ int row_stride;/* physical row width in output buffer */
+
+#ifdef GDCM_JPG_DEBUG
+ printf("entree dans File::gdcm_read_JPEG_file (i.e. 8), depuis gdcmJpeg\n");
+#endif //GDCM_JPG_DEBUG
+
+ /* In this example we want to open the input file before doing anything else,
+ * so that the setjmp() error recovery below can assume the file is open.
+ * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
+ * requires it in order to read binary files.
+ */
+
+ /* Step 1: allocate and initialize JPEG decompression object */
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 1\n");
+#endif //GDCM_JPG_DEBUG
+
/* We set up the normal JPEG error routines, then override error_exit. */
cinfo.err = jpeg_std_error(&jerr.pub);
jerr.pub.error_exit = my_error_exit;
- /* Establish the setjmp return context for my_error_exit to use. */
-
- if (setjmp(jerr.setjmp_buffer)) {
+ /* Establish the setjmp return context for my_error_exit to use. */
+ if (setjmp(jerr.setjmp_buffer))
+ {
/* If we get here, the JPEG code has signaled an error.
* We need to clean up the JPEG object, close the input file, and return.
*/
jpeg_destroy_decompress(&cinfo);
+
+ *howManyRead += input - input_buffer;
+ *howManyWritten += pimage - (char *)image_buffer;
return 0;
}
+
/* Now we can initialize the JPEG decompression object. */
jpeg_create_decompress(&cinfo);
/* Step 2: specify data source (eg, a file) */
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 2\n");
+#endif //GDCM_JPG_DEBUG
+
+ jpeg_memory_src(&cinfo, input, buflen);
-if (DEBUG) printf("Entree Step 2\n");
-
- jpeg_stdio_src(&cinfo, fp);
-
/* Step 3: read file parameters with jpeg_read_header() */
-
- if (DEBUG) printf("Entree Step 3\n");
-
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 3\n");
+#endif //GDCM_JPG_DEBUG
+
(void) jpeg_read_header(&cinfo, TRUE);
-
+
/* We can ignore the return value from jpeg_read_header since
* (a) suspension is not possible with the stdio data source, and
* (b) we passed TRUE to reject a tables-only JPEG file as an error.
* See libjpeg.doc for more info.
*/
+
+ // prevent the library from performing any color space conversion
+ if( cinfo.process == JPROC_LOSSLESS )
+ {
+ cinfo.jpeg_color_space = JCS_UNKNOWN;
+ cinfo.out_color_space = JCS_UNKNOWN;
+ }
-if (DEBUG) {
- printf("--------------Header contents :----------------\n");
- printf("image_width %d image_height %d\n",
- cinfo.image_width , cinfo.image_height);
- printf("bits of precision in image data %d \n",
- cinfo.output_components);
- printf("nb of color components returned %d \n",
- cinfo.data_precision);
-}
-
-
-/*
- JDIMENSION image_width; // input image width
- JDIMENSION image_height; // input image height
- int output_components; // # of color components returned
- J_COLOR_SPACE in_color_space; // colorspace of input image
- double input_gamma; // image gamma of input image
- int data_precision; // bits of precision in image data
-
-*/
+#ifdef GDCM_JPG_DEBUG
+ printf("--------------Header contents :----------------\n");
+ printf("image_width %d image_height %d\n",
+ cinfo.image_width , cinfo.image_height);
+ printf("bits of precision in image data %d \n",
+ cinfo.output_components);
+ printf("nb of color components returned %d \n",
+ cinfo.data_precision);
+#endif //GDCM_JPG_DEBUG
+
+
+ /*
+ * JDIMENSION image_width; // input image width
+ * JDIMENSION image_height; // input image height
+ * int output_components; // # of color components returned
+ * J_COLOR_SPACE in_color_space; // colorspace of input image
+ * double input_gamma; // image gamma of input image
+ * int data_precision; // bits of precision in image data
+ */
/* Step 4: set parameters for decompression */
-
- if (DEBUG) printf("Entree Step 4\n");
-
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 4\n");
+#endif //GDCM_JPG_DEBUG
/* In this example, we don't need to change any of the defaults set by
* jpeg_read_header(), so we do nothing here.
*/
/* Step 5: Start decompressor */
-
- if (DEBUG) printf("Entree Step 5\n");
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 5\n");
+#endif //GDCM_JPG_DEBUG
(void) jpeg_start_decompress(&cinfo);
/* We can ignore the return value since suspension is not possible
* with the stdio data source.
*/
-
+
/* We may need to do some setup of our own at this point before reading
* the data. After jpeg_start_decompress() we have the correct scaled
* output image dimensions available, as well as the output colormap
* if we asked for color quantization.
* In this example, we need to make an output work buffer of the right size.
*/
-
+
/* JSAMPLEs per row in output buffer */
- row_stride = cinfo.output_width * cinfo.output_components;
+ row_stride = cinfo.output_width * cinfo.output_components*2;
- if (DEBUG) printf ("cinfo.output_width %d cinfo.output_components %d row_stride %d\n",
- cinfo.output_width, cinfo.output_components,row_stride);
-
+#ifdef GDCM_JPG_DEBUG
+ printf ("cinfo.output_width %d cinfo.output_components %d row_stride %d\n",
+ cinfo.output_width, cinfo.output_components,row_stride);
+#endif //GDCM_JPG_DEBUG
+
/* Make a one-row-high sample array that will go away when done with image */
buffer = (*cinfo.mem->alloc_sarray)
- ((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1);
+ ((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1);
+
/* Step 6: while (scan lines remain to be read) */
-
- if (DEBUG) printf("Entree Step 6\n");
-
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 6\n");
+#endif //GDCM_JPG_DEBUG
/* jpeg_read_scanlines(...); */
/* Here we use the library's state variable cinfo.output_scanline as the
* loop counter, so that we don't have to keep track ourselves.
*/
-
- if (DEBUG) printf ("cinfo.output_height %d cinfo.output_width %d\n",
- cinfo.output_height,cinfo.output_width);
-
- pimage=(char *)image_buffer;
-
+#ifdef GDCM_JPG_DEBUG
+ printf ("cinfo.output_height %d cinfo.output_width %d\n",
+ cinfo.output_height,cinfo.output_width);
+#endif //GDCM_JPG_DEBUG
+ int bufsize = cinfo.output_width * cinfo.output_components;
+ size_t rowsize = bufsize * sizeof(JSAMPLE);
+
while (cinfo.output_scanline < cinfo.output_height) {
- /* jpeg_read_scanlines expects an array of pointers to scanlines.
- * Here the array is only one element long, but you could ask for
- * more than one scanline at a time if that's more convenient.
- */
-
- // l'image est deja allouée (et passée en param)
- // on ecrit directement les pixels
- // (on DEVRAIT pouvoir)
-
- //(void) jpeg_read_scanlines(&cinfo, pimage, 1);
-
+ /* jpeg_read_scanlines expects an array of pointers to scanlines.
+ * Here the array is only one element long, but you could ask for
+ * more than one scanline at a time if that's more convenient.
+ */
+
+ //printf( "scanlines: %d\n",cinfo.output_scanline);
(void) jpeg_read_scanlines(&cinfo, buffer, 1);
-
- if ( BITS_IN_JSAMPLE == 8) {
- memcpy( pimage, buffer[0],row_stride);
- pimage+=row_stride;
- } else {
- memcpy( pimage, buffer[0],row_stride*2 ); // FIXME : *2 car 16 bits?!?
- pimage+=row_stride*2; // FIXME : *2 car 16 bits?!?
- }
+#if defined(GDCM_WORDS_BIGENDIAN) && (CMAKE_BITS_IN_JSAMPLE != 8)
+ uint16_t *buffer16 = (uint16_t*)*buffer;
+ uint16_t *pimage16 = (uint16_t*)pimage;
+ for(int i=0;i<rowsize/2;i++)
+ pimage16[i] = (buffer16[i] >> 8) | (buffer16[i] << 8 );
+#else
+ memcpy( pimage, *buffer,rowsize);
+#endif //GDCM_WORDS_BIGENDIAN
+ pimage+=rowsize;
}
-
+
/* Step 7: Finish decompression */
-
-if (DEBUG) printf("Entree Step 7\n");
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 7\n");
+#endif //GDCM_JPG_DEBUG
+
+ input = (JOCTET *)cinfo.src->next_input_byte;
(void) jpeg_finish_decompress(&cinfo);
+
/* We can ignore the return value since suspension is not possible
* with the stdio data source.
*/
-
+
/* Step 8: Release JPEG decompression object */
-
-if (DEBUG) printf("Entree Step 8\n");
+#ifdef GDCM_JPG_DEBUG
+ printf("Entree Step 8\n");
+#endif //GDCM_JPG_DEBUG
+
/* This is an important step since it will release a good deal of memory. */
jpeg_destroy_decompress(&cinfo);
-
+
+
/* After finish_decompress, we can close the input file.
* Here we postpone it until after no more JPEG errors are possible,
* so as to simplify the setjmp error logic above. (Actually, I don't
* think that jpeg_destroy can do an error exit, but why assume anything...)
*/
-
+
/* At this point you may want to check to see whether any corrupt-data
* warnings occurred (test whether jerr.pub.num_warnings is nonzero).
*/
/* And we're done! */
-
- return 1;
-}
+ *howManyRead += input - input_buffer;
+ *howManyWritten += pimage - (char *)image_buffer;
-/*
- * SOME FINE POINTS:
- *
- * In the above code, we ignored the return value of jpeg_read_scanlines,
- * which is the number of scanlines actually read. We could get away with
- * this because we asked for only one line at a time and we weren't using
- * a suspending data source. See libjpeg.doc for more info.
- *
- * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress();
- * we should have done it beforehand to ensure that the space would be
- * counted against the JPEG max_memory setting. In some systems the above
- * code would risk an out-of-memory error. However, in general we don't
- * know the output image dimensions before jpeg_start_decompress(), unless we
- * call jpeg_calc_output_dimensions(). See libjpeg.doc for more about this.
- *
- * Scanlines are returned in the same order as they appear in the JPEG file,
- * which is standardly top-to-bottom. If you must emit data bottom-to-top,
- * you can use one of the virtual arrays provided by the JPEG memory manager
- * to invert the data. See wrbmp.c for an example.
- *
- * As with compression, some operating modes may require temporary files.
- * On some systems you may need to set up a signal handler to ensure that
- * temporary files are deleted if the program is interrupted. See libjpeg.doc.
- */
-
-
-
-
-
-
+ return true;
+}
+} // end namespace gdcm
git://git.creatis.insa-lyon.fr / gdcm.git / blobdiff