/*
* jdmaster.c
*
- * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
typedef struct {
struct jpeg_decomp_master pub; /* public fields */
- int pass_number; /* # of passes completed */
+ int pass_number; /* # of passes completed */
boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */
cinfo->comp_info[1].v_samp_factor != 1 ||
cinfo->comp_info[2].v_samp_factor != 1)
return FALSE;
- /* furthermore, it doesn't work if we've scaled the IDCTs differently */
- if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
- cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
- cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size)
+ /* furthermore, it doesn't work if each component has been
+ processed differently */
+ if (cinfo->comp_info[0].codec_data_unit != cinfo->min_codec_data_unit ||
+ cinfo->comp_info[1].codec_data_unit != cinfo->min_codec_data_unit ||
+ cinfo->comp_info[2].codec_data_unit != cinfo->min_codec_data_unit)
return FALSE;
/* ??? also need to test for upsample-time rescaling, when & if supported */
- return TRUE; /* by golly, it'll work... */
+ return TRUE; /* by golly, it'll work... */
#else
return FALSE;
#endif
jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
/* Do computations that are needed before master selection phase */
{
-#ifdef IDCT_SCALING_SUPPORTED
- int ci;
- jpeg_component_info *compptr;
-#endif
-
/* Prevent application from calling me at wrong times */
if (cinfo->global_state != DSTATE_READY)
ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-#ifdef IDCT_SCALING_SUPPORTED
-
- /* Compute actual output image dimensions and DCT scaling choices. */
- if (cinfo->scale_num * 8 <= cinfo->scale_denom) {
- /* Provide 1/8 scaling */
- cinfo->output_width = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width, 8L);
- cinfo->output_height = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height, 8L);
- cinfo->min_DCT_scaled_size = 1;
- } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) {
- /* Provide 1/4 scaling */
- cinfo->output_width = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width, 4L);
- cinfo->output_height = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height, 4L);
- cinfo->min_DCT_scaled_size = 2;
- } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) {
- /* Provide 1/2 scaling */
- cinfo->output_width = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width, 2L);
- cinfo->output_height = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height, 2L);
- cinfo->min_DCT_scaled_size = 4;
- } else {
- /* Provide 1/1 scaling */
- cinfo->output_width = cinfo->image_width;
- cinfo->output_height = cinfo->image_height;
- cinfo->min_DCT_scaled_size = DCTSIZE;
- }
- /* In selecting the actual DCT scaling for each component, we try to
- * scale up the chroma components via IDCT scaling rather than upsampling.
- * This saves time if the upsampler gets to use 1:1 scaling.
- * Note this code assumes that the supported DCT scalings are powers of 2.
- */
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- int ssize = cinfo->min_DCT_scaled_size;
- while (ssize < DCTSIZE &&
- (compptr->h_samp_factor * ssize * 2 <=
- cinfo->max_h_samp_factor * cinfo->min_DCT_scaled_size) &&
- (compptr->v_samp_factor * ssize * 2 <=
- cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size)) {
- ssize = ssize * 2;
- }
- compptr->DCT_scaled_size = ssize;
- }
-
- /* Recompute downsampled dimensions of components;
- * application needs to know these if using raw downsampled data.
- */
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- /* Size in samples, after IDCT scaling */
- compptr->downsampled_width = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width *
- (long) (compptr->h_samp_factor * compptr->DCT_scaled_size),
- (long) (cinfo->max_h_samp_factor * DCTSIZE));
- compptr->downsampled_height = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height *
- (long) (compptr->v_samp_factor * compptr->DCT_scaled_size),
- (long) (cinfo->max_v_samp_factor * DCTSIZE));
- }
-
-#else /* !IDCT_SCALING_SUPPORTED */
-
- /* Hardwire it to "no scaling" */
- cinfo->output_width = cinfo->image_width;
- cinfo->output_height = cinfo->image_height;
- /* jdinput.c has already initialized DCT_scaled_size to DCTSIZE,
- * and has computed unscaled downsampled_width and downsampled_height.
- */
-
-#endif /* IDCT_SCALING_SUPPORTED */
+ (*cinfo->codec->calc_output_dimensions) (cinfo);
/* Report number of components in selected colorspace. */
/* Probably this should be in the color conversion module... */
case JCS_YCCK:
cinfo->out_color_components = 4;
break;
- default: /* else must be same colorspace as in file */
+ default: /* else must be same colorspace as in file */
cinfo->out_color_components = cinfo->num_components;
break;
}
cinfo->output_components = (cinfo->quantize_colors ? 1 :
- cinfo->out_color_components);
+ cinfo->out_color_components);
/* See if upsampler will want to emit more than one row at a time */
if (use_merged_upsample(cinfo))
* processes are inner loops and need to be as fast as possible. On most
* machines, particularly CPUs with pipelines or instruction prefetch,
* a (subscript-check-less) C table lookup
- * x = sample_range_limit[x];
+ * x = sample_range_limit[x];
* is faster than explicit tests
- * if (x < 0) x = 0;
- * else if (x > MAXJSAMPLE) x = MAXJSAMPLE;
+ * if (x < 0) x = 0;
+ * else if (x > MAXJSAMPLE) x = MAXJSAMPLE;
* These processes all use a common table prepared by the routine below.
*
* For most steps we can mathematically guarantee that the initial value
* possible if the input data is corrupt. To avoid any chance of indexing
* off the end of memory and getting a bad-pointer trap, we perform the
* post-IDCT limiting thus:
- * x = range_limit[x & MASK];
+ * x = range_limit[x & MASK];
* where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit
* samples. Under normal circumstances this is more than enough range and
* a correct output will be generated; with bogus input data the mask will
table = (JSAMPLE *)
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE));
- table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */
+ (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE));
+ table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */
cinfo->sample_range_limit = table;
/* First segment of "simple" table: limit[x] = 0 for x < 0 */
MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE));
/* Main part of "simple" table: limit[x] = x */
for (i = 0; i <= MAXJSAMPLE; i++)
table[i] = (JSAMPLE) i;
- table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */
+ table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */
/* End of simple table, rest of first half of post-IDCT table */
for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++)
table[i] = MAXJSAMPLE;
/* Second half of post-IDCT table */
MEMZERO(table + (2 * (MAXJSAMPLE+1)),
- (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE));
+ (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE));
MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE),
- cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE));
+ cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE));
}
master_selection (j_decompress_ptr cinfo)
{
my_master_ptr master = (my_master_ptr) cinfo->master;
- boolean use_c_buffer;
long samplesperrow;
JDIMENSION jd_samplesperrow;
}
jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant);
}
- /* Inverse DCT */
- jinit_inverse_dct(cinfo);
- /* Entropy decoding: either Huffman or arithmetic coding. */
- if (cinfo->arith_code) {
- ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
- } else {
- if (cinfo->progressive_mode) {
-#ifdef D_PROGRESSIVE_SUPPORTED
- jinit_phuff_decoder(cinfo);
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- } else
- jinit_huff_decoder(cinfo);
- }
/* Initialize principal buffer controllers. */
- use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image;
- jinit_d_coef_controller(cinfo, use_c_buffer);
-
if (! cinfo->raw_data_out)
jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */);
cinfo->inputctl->has_multiple_scans) {
int nscans;
/* Estimate number of scans to set pass_limit. */
- if (cinfo->progressive_mode) {
+ if (cinfo->process == JPROC_PROGRESSIVE) {
/* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */
nscans = 2 + 3 * cinfo->num_components;
} else {
if (cinfo->quantize_colors && cinfo->colormap == NULL) {
/* Select new quantization method */
if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) {
- cinfo->cquantize = master->quantizer_2pass;
- master->pub.is_dummy_pass = TRUE;
+ cinfo->cquantize = master->quantizer_2pass;
+ master->pub.is_dummy_pass = TRUE;
} else if (cinfo->enable_1pass_quant) {
- cinfo->cquantize = master->quantizer_1pass;
+ cinfo->cquantize = master->quantizer_1pass;
} else {
- ERREXIT(cinfo, JERR_MODE_CHANGE);
+ ERREXIT(cinfo, JERR_MODE_CHANGE);
}
}
- (*cinfo->idct->start_pass) (cinfo);
- (*cinfo->coef->start_output_pass) (cinfo);
+ (*cinfo->codec->start_output_pass) (cinfo);
if (! cinfo->raw_data_out) {
if (! master->using_merged_upsample)
- (*cinfo->cconvert->start_pass) (cinfo);
+ (*cinfo->cconvert->start_pass) (cinfo);
(*cinfo->upsample->start_pass) (cinfo);
if (cinfo->quantize_colors)
- (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass);
+ (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass);
(*cinfo->post->start_pass) (cinfo,
- (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU));
+ (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU));
(*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU);
}
}
if (cinfo->progress != NULL) {
cinfo->progress->completed_passes = master->pass_number;
cinfo->progress->total_passes = master->pass_number +
- (master->pub.is_dummy_pass ? 2 : 1);
+ (master->pub.is_dummy_pass ? 2 : 1);
/* In buffered-image mode, we assume one more output pass if EOI not
* yet reached, but no more passes if EOI has been reached.
*/
master = (my_master_ptr)
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_decomp_master));
+ SIZEOF(my_decomp_master));
cinfo->master = (struct jpeg_decomp_master *) master;
master->pub.prepare_for_output_pass = prepare_for_output_pass;
master->pub.finish_output_pass = finish_output_pass;
git://git.creatis.insa-lyon.fr / gdcm.git / blobdiff