/*=========================================================================
-Program: bbtk
-Module: $RCSfile$
-Language: C++
-Date: $Date$
-Version: $Revision$
-=========================================================================*/
+ Program: bbtk
+ Module: $RCSfile$
+ Language: C++
+ Date: $Date$
+ Version: $Revision$
+ =========================================================================*/
/* ---------------------------------------------------------------------
-* Copyright (c) CREATIS-LRMN (Centre de Recherche en Imagerie Medicale)
-* Authors : Eduardo Davila, Laurent Guigues, Jean-Pierre Roux
-*
-* This software is governed by the CeCILL-B license under French law and
-* abiding by the rules of distribution of free software. You can use,
-* modify and/ or redistribute the software under the terms of the CeCILL-B
-* license as circulated by CEA, CNRS and INRIA at the following URL
-* http://www.cecill.info/licences/Licence_CeCILL-B_V1-en.html
-* or in the file LICENSE.txt.
-*
-* As a counterpart to the access to the source code and rights to copy,
-* modify and redistribute granted by the license, users are provided only
-* with a limited warranty and the software's author, the holder of the
-* economic rights, and the successive licensors have only limited
-* liability.
-*
-* The fact that you are presently reading this means that you have had
-* knowledge of the CeCILL-B license and that you accept its terms.
-* ------------------------------------------------------------------------ */
+ * Copyright (c) CREATIS-LRMN (Centre de Recherche en Imagerie Medicale)
+ * Authors : Eduardo Davila, Laurent Guigues, Jean-Pierre Roux
+ *
+ * This software is governed by the CeCILL-B license under French law and
+ * abiding by the rules of distribution of free software. You can use,
+ * modify and/ or redistribute the software under the terms of the CeCILL-B
+ * license as circulated by CEA, CNRS and INRIA at the following URL
+ * http://www.cecill.info/licences/Licence_CeCILL-B_V1-en.html
+ * or in the file LICENSE.txt.
+ *
+ * As a counterpart to the access to the source code and rights to copy,
+ * modify and redistribute granted by the license, users are provided only
+ * with a limited warranty and the software's author, the holder of the
+ * economic rights, and the successive licensors have only limited
+ * liability.
+ *
+ * The fact that you are presently reading this means that you have had
+ * knowledge of the CeCILL-B license and that you accept its terms.
+ * ------------------------------------------------------------------------ */
/**
-* \file
-* \brief Class bbtk::WxInterfaceEditorGraphicBBS .
-*/
+ * \file
+ * \brief Class bbtk::WxInterfaceEditorGraphicBBS .
+ */
#include "bbtkwxGUIEditorGraphicBBS.h"
#include "creaWx.h"
#include <InterpreterBBS.h>
-namespace bbtk
-{
-
-
- //=========================================================================
- wxGUIEditorGraphicBBS::wxGUIEditorGraphicBBS(wxFrame *parent)
- : wxFrame(parent, -1, _T("bbtkGEditor"),wxDefaultPosition, wxSize(1200,800))
- {
-
- _frameAUIMgr = new wxAuiManager(this);
-
-
- /*std::string datadir( crea::System::GetExecutablePath() );
- std::string datadir (".");
- cout<<"RaC //------------------"<<endl;
- cout<<"RaC //TODO wxGUIEditorGraphicBBS constructor.Initialize datadir with crea::System::GetExecutablePath() ."<<endl;
- cout<<"RaC //------------------"<<endl;
-
- #ifdef LINUX // assume this is OSX
- datadir=datadir+"/../share/creaContours";
- #endif // MACOSX
+namespace bbtk {
+
+//=========================================================================
+wxGUIEditorGraphicBBS::wxGUIEditorGraphicBBS(wxFrame *parent) :
+ wxFrame(parent, -1, _T("bbtkGEditor"), wxDefaultPosition, wxSize(
+ 1200, 800)) {
+
+ _frameAUIMgr = new wxAuiManager(this);
+
+ /*std::string datadir( crea::System::GetExecutablePath() );
+ std::string datadir (".");
+ cout<<"RaC //------------------"<<endl;
+ cout<<"RaC //TODO wxGUIEditorGraphicBBS constructor.Initialize datadir with crea::System::GetExecutablePath() ."<<endl;
+ cout<<"RaC //------------------"<<endl;
+
+ #ifdef LINUX // assume this is OSX
+ datadir=datadir+"/../share/creaContours";
+ #endif // MACOSX
+
+ #ifdef MACOSX // assume this is OSX
+ datadir=datadir+"/../../../../share/creaContours";
+ #endif // MACOSX
+
+ _dataDir = datadir;*/
+
+ initMenu();
+ initToolbar();
+ initTabPanelsManager();
+ initPackageBrowser();
+ initHelpHTMLBrowser();
+
+ CreateStatusBar();
+ _frameAUIMgr->Update();
+ _actualPkgBrowserBoxName = "";
+ _actualPkgBrowserPkgName = "";
+ refreshGUIControls();
+}
+
+//=========================================================================
+wxGUIEditorGraphicBBS::~wxGUIEditorGraphicBBS() {
+ printf("EED %p ~wxGUIEditorGraphicBBS()\n", this);
+
+ //EED02JUIN2010 delete _tabsMgr;
+
+ _frameAUIMgr->UnInit();
+ // FCY memory leaks
+ delete _frameAUIMgr;
+ delete _notebook;
+ delete _tabsMgr;
+
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::initToolbar() {
+ wxBitmap bmp_new(new_xpm);
+ wxBitmap bmp_open(open_xpm);
+ wxBitmap bmp_save(save_xpm);
+ wxBitmap bmp_run(run_xpm);
+ wxBitmap bmp_delete(delete_xpm);
+ wxBitmap bmp_centerview(centerview_xpm);
+ wxBitmap bmp_box(box_xpm);
+ wxBitmap bmp_executablebox(executablebox_xpm);
+ wxBitmap bmp_complexbox(complexbox_xpm);
+ wxBitmap bmp_complexinputport(complexinputport_xpm);
+ wxBitmap bmp_complexoutputport(complexoutputport_xpm);
+
+ wxToolBar *toolbar = new wxToolBar(this, wxID_ANY);
+
+ //Adds a tool btn to the toolbar
+ toolbar->AddTool(ID_NEW, _T("New"), bmp_new, wxNullBitmap, wxITEM_NORMAL,
+ _T("New tab"), _T("Create a new panel tab"));
+ toolbar->AddTool(ID_OPEN, _T("Open diagram"), bmp_open, wxNullBitmap,
+ wxITEM_NORMAL, _T("Open a diagram"), _T("Open a diagram"));
+ toolbar->AddTool(ID_SAVE_DIAGRAM, _T("Save Diagram"), bmp_save,
+ wxNullBitmap, wxITEM_NORMAL, _T("Saves the current diagram"),
+ _T("Saves the current diagram")); //DFCH
+ //toolbar->AddTool(ID_SAVE_AS_DIAGRAM,_T("Save Diagram As"),bmp_save, wxNullBitmap, wxITEM_NORMAL,_T("Saves the current diagram"), _T("Saves the current diagram")); //DFCH
+ toolbar->AddTool(ID_RUN, _T("Run"), bmp_run, wxNullBitmap, wxITEM_NORMAL,
+ _T("Execute actual diagram"), _T("Execute actual diagram"));
+ toolbar->AddTool(ID_DELETEALL, _T("Delete all"), bmp_delete, wxNullBitmap,
+ wxITEM_NORMAL, _T("Delete all boxes"), _T("Delete all boxes"));
+ toolbar->AddTool(ID_CENTERVIEW, _T("Center view"), bmp_centerview,
+ wxNullBitmap, wxITEM_NORMAL, _T("Center view"), _T("Center view"));
+ toolbar->AddSeparator();
+ toolbar->AddTool(ID_BTNBOX, _T("New Box"), bmp_box, wxNullBitmap,
+ wxITEM_NORMAL, _T("New Box"), _T("Nex Box"));
+ toolbar->AddSeparator();
+ toolbar->AddTool(ID_BTEXECUTABLEBOX, _T("Select as executable Box"),
+ bmp_executablebox, wxNullBitmap, wxITEM_NORMAL,
+ _T("Select as executable Box"), _T("Select as executable Box"));
+ toolbar->AddSeparator();
+ toolbar->AddTool(ID_BTNCOMPLEXBOX, _T("Complex box"), complexbox_xpm,
+ wxNullBitmap, wxITEM_NORMAL, _T("Complex box"), _T("Complex box"));
+ toolbar->SetToggle(ID_BTNCOMPLEXBOX, true);
+ toolbar->AddTool(ID_ADDCOMPLEXBOXINPUT, _T("Add input to Complex box"),
+ bmp_complexinputport, wxNullBitmap, wxITEM_NORMAL,
+ _T("Add input to Complex box"), _T("Add input to Complex box"));
+ toolbar->AddTool(ID_ADDCOMPLEXBOXOUTPUT, _T("Add output to Complex box"),
+ bmp_complexoutputport, wxNullBitmap, wxITEM_NORMAL,
+ _T("Add output Complex box"), _T("Add output Complex box"));
+ toolbar->EnableTool(ID_ADDCOMPLEXBOXINPUT, false);
+ toolbar->EnableTool(ID_ADDCOMPLEXBOXOUTPUT, false);
+
+ toolbar->SetMargins(2, 2);
+ toolbar->Realize();
+ SetToolBar(toolbar);
+
+ // connect command event handlers
+ Connect(ID_NEW, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreateNewTab));
+ Connect(ID_OPEN, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnOpenDiagram));
+ Connect(ID_SAVE_DIAGRAM, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveActualDiagram)); //DFCH
+ Connect(ID_SAVE_AS_DIAGRAM, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveAsActualDiagram)); //DFCH
+ Connect(
+ ID_RUN,
+ wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnExecuteActualDiagram));
+ Connect(
+ ID_DELETEALL,
+ wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnDeleteAllBoxesActualDiagram));
+ Connect(
+ ID_CENTERVIEW,
+ wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCenterViewActualDiagram));
+ Connect(ID_BTNBOX, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnClickBtnBox));
+ Connect(
+ ID_BTEXECUTABLEBOX,
+ wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnClickBtnExecutableBox));
+ Connect(ID_BTNCOMPLEXBOX, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnClickBtnComplexBox));
+ Connect(ID_ADDCOMPLEXBOXINPUT, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnAddComplexBoxInput));
+ Connect(ID_ADDCOMPLEXBOXOUTPUT, wxEVT_COMMAND_TOOL_CLICKED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnAddComplexBoxOutput));
+
+}
+//=========================================================================
+void wxGUIEditorGraphicBBS::initHelpHTMLBrowser() {
+ //TO FIX THE PATH OF BBTK BIN IN ORDER TO USE REGENERATE EXECUTABLES
+ //RegenerateAll();
+ _helpHtmlBrowser = new WxGUIHtmlBrowser(this, wxSize(200, 0));
+ _frameAUIMgr->AddPane(_helpHtmlBrowser, wxAuiPaneInfo().Right().MinSize(
+ 200, 200));
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::initMenu() {
+ // Create File menu and its items
+ wxMenu *fileMenu = new wxMenu();
+ fileMenu->Append(ID_NEW, _T("New diagram"), _T("New"));
+ fileMenu->Append(ID_SAVE_DIAGRAM, _T("Save Diagram"), _T("Save Diagram")); //DFCH
+ fileMenu->Append(ID_SAVE_AS_DIAGRAM, _T("Save Diagram As"),
+ _T("Save Diagram As")); //DFCH
+ fileMenu->Append(ID_OPEN_BBS, _T("Open BBS"), _T("Open BBS"));
+ fileMenu->Append(ID_SAVE_AS_BBS, _T("Save BBS"), _T("Save BBS"));
+ fileMenu->Append(ID_SAVE_AS_COMPLEXBOX, _T("Save complex box"),
+ _T("Save complex box"));
+ fileMenu->Append(wxID_EXIT, _T("E&xit"), _T("Exit"));
+
+ Connect(ID_NEW, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreateNewTab));
+ Connect(ID_SAVE_DIAGRAM, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveActualDiagram)); //DFCH
+ Connect(ID_SAVE_AS_DIAGRAM, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveAsActualDiagram));
+ Connect(ID_OPEN_BBS, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnOpenBBS));
+ Connect(ID_SAVE_AS_BBS, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveActualBBS));
+ Connect(
+ ID_SAVE_AS_COMPLEXBOX,
+ wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveActualComplexBox));
+ Connect(wxID_EXIT, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnExit));
+
+ // Create Help menu and its items
+ wxMenu *editMenu = new wxMenu;
+ editMenu->Append(ID_COPY_TO_COMPLEXDIAGRAM,
+ _T("Copy selected to complex box"),
+ _T("Creates a new complex box diagram with selected boxes"));
+
+ Connect(
+ ID_COPY_TO_COMPLEXDIAGRAM,
+ wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCopySelectedToComplexDiagram));
+
+ // Create Help menu and its items
+ wxMenu *helpMenu = new wxMenu;
+ helpMenu->Append(wxID_ABOUT, _T("&About..."), _T("About"));
+ helpMenu->Append(ID_HELP_BBEDITOR, _T("&Help..."), _T("Help"));
+ Connect(ID_HELP_BBEDITOR, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnHelpBBeditor));
+
+ // Create Tool menu
+ wxMenu *menuTools = new wxMenu;
+ menuTools->Append(ID_bbEditor_Tool_Menu_CreatePackage,
+ _T("Create &package") );
+ menuTools->Append(ID_bbEditor_Tool_Menu_CreateBlackBox,
+ _T("Create &blackbox") );
+ menuTools->Append(ID_bbEditor_Tool_Menu_PlugPackage, _T("Plug package") );
+ menuTools->Append(ID_bbEditor_Tool_Menu_EditConfig, _T("&Edit bbtk config") );
+ menuTools->Append(ID_bbEditor_Tool_Menu_ShowHTMLDoc,
+ _T("Show &HTML documentation") );
+ menuTools->Append(ID_bbEditor_Tool_Menu_CreateIndex, _T("&Generate index") );
+
+ Connect(ID_bbEditor_Tool_Menu_CreatePackage, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreatePackage));
+ Connect(ID_bbEditor_Tool_Menu_CreateBlackBox, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreateBlackBox));
+ Connect(ID_bbEditor_Tool_Menu_PlugPackage, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnPlugPackage));
+ Connect(ID_bbEditor_Tool_Menu_EditConfig, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnEditConfig));
+ Connect(ID_bbEditor_Tool_Menu_ShowHTMLDoc, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnShowHTMLDoc));
+ Connect(ID_bbEditor_Tool_Menu_CreateIndex, wxEVT_COMMAND_MENU_SELECTED,
+ wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreateIndex));
+
+ // Append the created menu to the menu bar
+ wxMenuBar *menuBar = new wxMenuBar();
+ menuBar->Append(fileMenu, _T("&File") );
+ menuBar->Append(editMenu, _T("&Edit") );
+ menuBar->Append(menuTools, _T("&Tool") );
+ menuBar->Append(helpMenu, _T("&Help") );
+
+ // Attach this menu bar to the frame
+ SetMenuBar(menuBar);
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::initTabPanelsManager() {
+ _notebook = new wxAuiNotebook(this, wxID_NOTEBOOK, wxDefaultPosition,
+ wxDefaultSize, wxAUI_NB_TOP | wxAUI_NB_TAB_MOVE
+ | wxAUI_NB_CLOSE_ON_ACTIVE_TAB | wxAUI_NB_TAB_FIXED_WIDTH
+ | wxAUI_NB_WINDOWLIST_BUTTON);
+ _tabsMgr = new wxTabPanelsManager(this);
+ _frameAUIMgr->AddPane(_notebook, wxAuiPaneInfo().CenterPane());
+
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::initPackageBrowser() {
+ _pkgBrowser = new WxGUIPackageBrowser2(this);
+ _pkgBrowser->IncludeAll();
+ _frameAUIMgr->AddPane(_pkgBrowser,
+ wxAuiPaneInfo().Left().MinSize(200, 200).CloseButton(false));
+}
+
+//================================================================
+
+void wxGUIEditorGraphicBBS::DoRegeneratePackageDoc(const std::string& pack) {
+ std::string mess("Regenerating doc for package '");
+ if (pack != "-a") {
+ mess += pack + "'";
+ } else {
+ mess = "Regenerating doc for all packages";
+ }
+
+ mess += " ... please wait";
+
+ SetStatusText(std2wx(mess));
+
+ //BBTK_BUSY_CURSOR;
+
+ std::string command;
+#if defined(WIN32)
+ command = "\"";
+#endif
+ command += ConfigurationFile::GetInstance().Get_bin_path();
+ command += ConfigurationFile::GetInstance().Get_file_separator();
+ command += "bbRegeneratePackageDoc";
+#if defined(WIN32)
+ command += "\"";
+#endif
- #ifdef MACOSX // assume this is OSX
- datadir=datadir+"/../../../../share/creaContours";
- #endif // MACOSX
+ command += " " + pack + " -q";
+ bbtkMessage("debug",1,"Executing system command '"<<command<<"'"<<std::endl);
+
+ if (!system(command.c_str())) {
+ SetStatusText(_T("Done !"));
+ /*
+ wxMessageBox(_T("Done !"),_T("Regenerate package '")
+ +std2wx(pack)+_T("' doc"),
+ wxOK | wxICON_INFORMATION);
+ */
+ } else {
+ SetStatusText(_T("Done !"));
+ wxString err(_T("An error occured while running '"));
+ err += bbtk::std2wx(command) + _T("'");
+ wxMessageBox(err, _T("Regenerate package doc"), wxOK | wxICON_ERROR);
+ }
+}
+
+//================================================================
+void wxGUIEditorGraphicBBS::DoRegenerateBoxesLists() {
+ SetStatusText(_T("Regenerating boxes lists ... please wait"));
+ //BBTK_BUSY_CURSOR ;
+
+ std::string command;
+#if defined(WIN32)
+ command = "\"";
+#endif
+ command += ConfigurationFile::GetInstance().Get_bin_path();
+ command += ConfigurationFile::GetInstance().Get_file_separator();
+ command += "bbRegenerateBoxesLists";
- _dataDir = datadir;*/
+#if defined(WIN32)
+ command += "\"";
+#endif
+ command += " -q";
- initMenu();
- initToolbar();
- initTabPanelsManager();
- initPackageBrowser();
- initHelpHTMLBrowser();
+ bbtkMessage("debug",1,"Executing system command '"<<command<<"'"<<std::endl);
- CreateStatusBar();
- _frameAUIMgr->Update();
- _actualPkgBrowserBoxName="";
- _actualPkgBrowserPkgName="";
- refreshGUIControls();
+ if (!system(command.c_str())) {
+ SetStatusText(_T("Done !"));
+ /*
+ wxMessageBox(_T("Done !"),_T("Regenerate boxes lists"),
+ wxOK | wxICON_INFORMATION);
+ */
+ } else {
+ SetStatusText(_T("Done !"));
+ wxString err(_T("An error occured while running '"));
+ err += bbtk::std2wx(command) + _T("'");
+ wxMessageBox(err, _T("Regenerate boxes lists"), wxOK | wxICON_ERROR);
}
+}
+//================================================================
+void wxGUIEditorGraphicBBS::RegenerateAll() {
+ DoRegeneratePackageDoc("-a");
+ DoRegenerateBoxesLists();
+}
- //=========================================================================
- wxGUIEditorGraphicBBS::~wxGUIEditorGraphicBBS()
- {
- printf ("EED %p ~wxGUIEditorGraphicBBS()\n" , this );
+//================================================================
-//EED02JUIN2010 delete _tabsMgr;
+wxAuiNotebook* wxGUIEditorGraphicBBS::getAuiNotebook() {
+ return _notebook;
+}
- _frameAUIMgr->UnInit();
- // FCY memory leaks
- delete _frameAUIMgr;
- delete _notebook;
- delete _tabsMgr;
+//================================================================
+void wxGUIEditorGraphicBBS::displayBlackBoxInfo(std::string packageName,
+ std::string boxName) {
+ if (_actualPkgBrowserPkgName != packageName || _actualPkgBrowserBoxName
+ != boxName) {
+ _actualPkgBrowserPkgName = packageName;
+ _actualPkgBrowserBoxName = boxName;
+ BlackBoxDescriptor::Pointer descriptor =
+ GObjectsMVCFactory::getInstance()->getBlackBoxDescriptor(
+ packageName, boxName);
+ _pkgBrowser->WxGUIBlackBoxListUserOnSelected(descriptor.get());
}
+}
- //=========================================================================
- void wxGUIEditorGraphicBBS::initToolbar()
- {
- wxBitmap bmp_new(new_xpm);
- wxBitmap bmp_open(open_xpm);
- wxBitmap bmp_save(save_xpm);
- wxBitmap bmp_run(run_xpm);
- wxBitmap bmp_delete(delete_xpm);
- wxBitmap bmp_centerview(centerview_xpm);
- wxBitmap bmp_box(box_xpm);
- wxBitmap bmp_executablebox(executablebox_xpm);
- wxBitmap bmp_complexbox(complexbox_xpm);
- wxBitmap bmp_complexinputport(complexinputport_xpm);
- wxBitmap bmp_complexoutputport(complexoutputport_xpm);
-
- wxToolBar *toolbar = new wxToolBar(this, wxID_ANY);
-
- //Adds a tool btn to the toolbar
- toolbar->AddTool(ID_NEW,_T("New"),bmp_new, wxNullBitmap, wxITEM_NORMAL,_T("New tab"), _T("Create a new panel tab"));
- toolbar->AddTool(ID_OPEN,_T("Open diagram"),bmp_open, wxNullBitmap, wxITEM_NORMAL,_T("Open a diagram"), _T("Open a diagram"));
- toolbar->AddTool(ID_SAVE_DIAGRAM,_T("Save Diagram"),bmp_save, wxNullBitmap, wxITEM_NORMAL,_T("Saves the current diagram"), _T("Saves the current diagram")); //DFCH
- //toolbar->AddTool(ID_SAVE_AS_DIAGRAM,_T("Save Diagram As"),bmp_save, wxNullBitmap, wxITEM_NORMAL,_T("Saves the current diagram"), _T("Saves the current diagram")); //DFCH
- toolbar->AddTool(ID_RUN,_T("Run"),bmp_run, wxNullBitmap, wxITEM_NORMAL,_T("Execute actual diagram"), _T("Execute actual diagram"));
- toolbar->AddTool(ID_DELETEALL,_T("Delete all"),bmp_delete, wxNullBitmap, wxITEM_NORMAL,_T("Delete all boxes"), _T("Delete all boxes"));
- toolbar->AddTool(ID_CENTERVIEW,_T("Center view"),bmp_centerview, wxNullBitmap, wxITEM_NORMAL,_T("Center view"), _T("Center view"));
- toolbar->AddSeparator();
- toolbar->AddTool(ID_BTNBOX,_T("New Box"),bmp_box, wxNullBitmap, wxITEM_NORMAL,_T("New Box"), _T("Nex Box"));
- toolbar->AddSeparator();
- toolbar->AddTool(ID_BTEXECUTABLEBOX,_T("Select as executable Box"),bmp_executablebox, wxNullBitmap, wxITEM_NORMAL,_T("Select as executable Box"), _T("Select as executable Box"));
- toolbar->AddSeparator();
- toolbar->AddTool(ID_BTNCOMPLEXBOX,_T("Complex box"),complexbox_xpm, wxNullBitmap, wxITEM_NORMAL,_T("Complex box"), _T("Complex box"));
- toolbar->SetToggle(ID_BTNCOMPLEXBOX,true);
- toolbar->AddTool(ID_ADDCOMPLEXBOXINPUT,_T("Add input to Complex box"),bmp_complexinputport, wxNullBitmap, wxITEM_NORMAL,_T("Add input to Complex box"), _T("Add input to Complex box"));
- toolbar->AddTool(ID_ADDCOMPLEXBOXOUTPUT,_T("Add output to Complex box"),bmp_complexoutputport, wxNullBitmap, wxITEM_NORMAL,_T("Add output Complex box"), _T("Add output Complex box"));
- toolbar->EnableTool(ID_ADDCOMPLEXBOXINPUT,false);
- toolbar->EnableTool(ID_ADDCOMPLEXBOXOUTPUT,false);
-
- toolbar->SetMargins( 2, 2 );
- toolbar->Realize();
- SetToolBar(toolbar);
-
- // connect command event handlers
- Connect(ID_NEW,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreateNewTab));
- Connect(ID_OPEN,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnOpenDiagram));
- Connect(ID_SAVE_DIAGRAM,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveActualDiagram)); //DFCH
- Connect(ID_SAVE_AS_DIAGRAM,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveAsActualDiagram)); //DFCH
- Connect(ID_RUN,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnExecuteActualDiagram));
- Connect(ID_DELETEALL,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnDeleteAllBoxesActualDiagram));
- Connect(ID_CENTERVIEW,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCenterViewActualDiagram));
- Connect(ID_BTNBOX,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnClickBtnBox));
- Connect(ID_BTEXECUTABLEBOX,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnClickBtnExecutableBox));
- Connect(ID_BTNCOMPLEXBOX,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnClickBtnComplexBox));
- Connect(ID_ADDCOMPLEXBOXINPUT,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnAddComplexBoxInput));
- Connect(ID_ADDCOMPLEXBOXOUTPUT,wxEVT_COMMAND_TOOL_CLICKED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnAddComplexBoxOutput));
+//=========================================================================
- }
- //=========================================================================
- void wxGUIEditorGraphicBBS::initHelpHTMLBrowser()
- {
- //TO FIX THE PATH OF BBTK BIN IN ORDER TO USE REGENERATE EXECUTABLES
- //RegenerateAll();
- _helpHtmlBrowser = new WxGUIHtmlBrowser(this,wxSize(200,0));
- _frameAUIMgr->AddPane(_helpHtmlBrowser,wxAuiPaneInfo().Right().MinSize(200,200));
- }
+void wxGUIEditorGraphicBBS::editBlackBox(GBlackBoxModel *bbmodel) {
+ wxBlackBoxEditionDialog* dialog =
+ new wxBlackBoxEditionDialog(this, bbmodel);
+ dialog->Show();
+}
- //=========================================================================
- void wxGUIEditorGraphicBBS::initMenu()
- {
- // Create File menu and its items
- wxMenu *fileMenu = new wxMenu();
- fileMenu->Append(ID_NEW, _T("New diagram"), _T("New"));
- fileMenu->Append(ID_SAVE_DIAGRAM, _T("Save Diagram"), _T("Save Diagram")); //DFCH
- fileMenu->Append(ID_SAVE_AS_DIAGRAM, _T("Save Diagram As"), _T("Save Diagram As")); //DFCH
- fileMenu->Append(ID_OPEN_BBS, _T("Open BBS"), _T("Open BBS"));
- fileMenu->Append(ID_SAVE_AS_BBS, _T("Save BBS"), _T("Save BBS"));
- fileMenu->Append(ID_SAVE_AS_COMPLEXBOX, _T("Save complex box"), _T("Save complex box"));
- fileMenu->Append(wxID_EXIT, _T("E&xit"), _T("Exit"));
-
- Connect(ID_NEW,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreateNewTab));
- Connect(ID_SAVE_DIAGRAM,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveActualDiagram)); //DFCH
- Connect(ID_SAVE_AS_DIAGRAM,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveAsActualDiagram));
- Connect(ID_OPEN_BBS,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnOpenBBS));
- Connect(ID_SAVE_AS_BBS,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveActualBBS));
- Connect(ID_SAVE_AS_COMPLEXBOX,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnSaveActualComplexBox));
- Connect(wxID_EXIT,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnExit));
-
- // Create Help menu and its items
- wxMenu *editMenu = new wxMenu;
- editMenu->Append(ID_COPY_TO_COMPLEXDIAGRAM, _T("Copy selected to complex box"), _T("Creates a new complex box diagram with selected boxes"));
-
- Connect(ID_COPY_TO_COMPLEXDIAGRAM,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCopySelectedToComplexDiagram));
-
- // Create Help menu and its items
- wxMenu *helpMenu = new wxMenu;
- helpMenu->Append(wxID_ABOUT, _T("&About..."), _T("About"));
- helpMenu->Append(ID_HELP_BBEDITOR, _T("&Help..."), _T("Help"));
- Connect(ID_HELP_BBEDITOR,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnHelpBBeditor));
-
- // Create Tool menu
- wxMenu *menuTools = new wxMenu;
- menuTools->Append( ID_bbEditor_Tool_Menu_CreatePackage, _T("Create &package") );
- menuTools->Append( ID_bbEditor_Tool_Menu_CreateBlackBox, _T("Create &blackbox") );
- menuTools->Append( ID_bbEditor_Tool_Menu_PlugPackage, _T("Plug package") );
- menuTools->Append( ID_bbEditor_Tool_Menu_EditConfig, _T("&Edit bbtk config") );
- menuTools->Append( ID_bbEditor_Tool_Menu_ShowHTMLDoc, _T("Show &HTML documentation") );
- menuTools->Append( ID_bbEditor_Tool_Menu_CreateIndex, _T("&Generate index") );
-
- Connect(ID_bbEditor_Tool_Menu_CreatePackage,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreatePackage));
- Connect(ID_bbEditor_Tool_Menu_CreateBlackBox,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreateBlackBox));
- Connect(ID_bbEditor_Tool_Menu_PlugPackage,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnPlugPackage));
- Connect(ID_bbEditor_Tool_Menu_EditConfig,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnEditConfig));
- Connect(ID_bbEditor_Tool_Menu_ShowHTMLDoc,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnShowHTMLDoc));
- Connect(ID_bbEditor_Tool_Menu_CreateIndex,wxEVT_COMMAND_MENU_SELECTED,wxCommandEventHandler(wxGUIEditorGraphicBBS::OnCreateIndex));
-
- // Append the created menu to the menu bar
- wxMenuBar *menuBar = new wxMenuBar();
- menuBar->Append( fileMenu, _T("&File") );
- menuBar->Append( editMenu, _T("&Edit") );
- menuBar->Append( menuTools, _T("&Tool") );
- menuBar->Append( helpMenu, _T("&Help") );
-
- // Attach this menu bar to the frame
- SetMenuBar(menuBar);
- }
+//=========================================================================
- //=========================================================================
- void wxGUIEditorGraphicBBS::initTabPanelsManager()
- {
- _notebook = new wxAuiNotebook(this,wxID_NOTEBOOK,wxDefaultPosition,wxDefaultSize,wxAUI_NB_TOP|wxAUI_NB_TAB_MOVE|wxAUI_NB_CLOSE_ON_ACTIVE_TAB|wxAUI_NB_TAB_FIXED_WIDTH|wxAUI_NB_WINDOWLIST_BUTTON);
- _tabsMgr = new wxTabPanelsManager(this);
- _frameAUIMgr->AddPane(_notebook,wxAuiPaneInfo().CenterPane());
+void wxGUIEditorGraphicBBS::updateStatusBar(std::string textStatus) {
+ SetStatusText(crea::std2wx(textStatus));
+}
- }
+//=========================================================================
- //=========================================================================
- void wxGUIEditorGraphicBBS::initPackageBrowser()
- {
- _pkgBrowser = new WxGUIPackageBrowser2(this);
- _pkgBrowser->IncludeAll();
- _frameAUIMgr->AddPane(_pkgBrowser,wxAuiPaneInfo().Left().MinSize(200,200).CloseButton(false));
- }
+void wxGUIEditorGraphicBBS::executeScript(std::string script) {
+ std::string separator =
+ ConfigurationFile::GetInstance().Get_file_separator();
+ std::string dir = ConfigurationFile::GetInstance().Get_default_temp_dir();
+ std::string filename = dir + separator + "tmp_bbtk.bbs";
- //================================================================
+ ofstream tempFile;
+ tempFile.open(filename.c_str());
+ tempFile << script;
+ tempFile.close();
- void wxGUIEditorGraphicBBS::DoRegeneratePackageDoc( const std::string& pack )
- {
- std::string mess("Regenerating doc for package '");
- if (pack!="-a"){
- mess += pack + "'";
- }
- else
- {
- mess = "Regenerating doc for all packages";
- }
-
- mess += " ... please wait";
-
- SetStatusText( std2wx(mess) );
-
- //BBTK_BUSY_CURSOR;
-
- std::string command;
- #if defined(WIN32)
- command = "\"";
- #endif
- command += ConfigurationFile::GetInstance().Get_bin_path();
- command += ConfigurationFile::GetInstance().Get_file_separator();
- command += "bbRegeneratePackageDoc";
- #if defined(WIN32)
- command += "\"";
- #endif
-
- command += " " + pack + " -q";
- bbtkMessage("debug",1,"Executing system command '"<<command<<"'"<<std::endl);
-
- if ( ! system ( command.c_str() ) )
- {
- SetStatusText( _T("Done !"));
- /*
- wxMessageBox(_T("Done !"),_T("Regenerate package '")
- +std2wx(pack)+_T("' doc"),
- wxOK | wxICON_INFORMATION);
- */
- }
- else
- {
- SetStatusText( _T("Done !"));
- wxString err(_T("An error occured while running '"));
- err += bbtk::std2wx(command) + _T("'");
- wxMessageBox(err,_T("Regenerate package doc"),wxOK | wxICON_ERROR);
- }
- }
+ std::string command = "";
- //================================================================
- void wxGUIEditorGraphicBBS::DoRegenerateBoxesLists()
- {
- SetStatusText( _T("Regenerating boxes lists ... please wait") );
- //BBTK_BUSY_CURSOR ;
-
- std::string command;
- #if defined(WIN32)
- command = "\"";
- #endif
- command += ConfigurationFile::GetInstance().Get_bin_path();
- command += ConfigurationFile::GetInstance().Get_file_separator();
- command += "bbRegenerateBoxesLists";
-
- #if defined(WIN32)
- command += "\"";
- #endif
- command += " -q";
-
- bbtkMessage("debug",1,"Executing system command '"<<command<<"'"<<std::endl);
-
- if ( ! system ( command.c_str() ) )
- {
- SetStatusText( _T("Done !"));
- /*
- wxMessageBox(_T("Done !"),_T("Regenerate boxes lists"),
- wxOK | wxICON_INFORMATION);
- */
- }
- else
- {
- SetStatusText( _T("Done !"));
- wxString err(_T("An error occured while running '"));
- err += bbtk::std2wx(command) + _T("'");
- wxMessageBox(err,_T("Regenerate boxes lists"),wxOK | wxICON_ERROR);
- }
- }
-
- //================================================================
- void wxGUIEditorGraphicBBS::RegenerateAll()
- {
- DoRegeneratePackageDoc("-a");
- DoRegenerateBoxesLists();
- }
-
- //================================================================
-
- wxAuiNotebook* wxGUIEditorGraphicBBS::getAuiNotebook()
- {
- return _notebook;
- }
-
- //================================================================
-
- void wxGUIEditorGraphicBBS::displayBlackBoxInfo(std::string packageName, std::string boxName)
- {
- if(_actualPkgBrowserPkgName != packageName || _actualPkgBrowserBoxName != boxName )
- {
- _actualPkgBrowserPkgName = packageName;
- _actualPkgBrowserBoxName = boxName;
-
- BlackBoxDescriptor::Pointer descriptor = GObjectsMVCFactory::getInstance()->getBlackBoxDescriptor(packageName, boxName);
- _pkgBrowser->WxGUIBlackBoxListUserOnSelected(descriptor.get());
- }
- }
-
- //=========================================================================
-
- void wxGUIEditorGraphicBBS::editBlackBox(GBlackBoxModel *bbmodel)
- {
- wxBlackBoxEditionDialog* dialog = new wxBlackBoxEditionDialog(this,bbmodel);
- dialog->Show();
- }
-
- //=========================================================================
-
- void wxGUIEditorGraphicBBS::updateStatusBar(std::string textStatus)
- {
- SetStatusText(crea::std2wx(textStatus));
- }
-
- //=========================================================================
-
- void wxGUIEditorGraphicBBS::executeScript(std::string script)
- {
- std::string separator = ConfigurationFile::GetInstance().Get_file_separator ();
- std::string dir = ConfigurationFile::GetInstance().Get_default_temp_dir();
- std::string filename = dir + separator + "tmp_bbtk.bbs";
-
- ofstream tempFile;
- tempFile.open(filename.c_str());
- tempFile << script;
- tempFile.close();
-
- std::string command = "";
-
#ifdef WIN32
- command += "start /b ";
+ command += "start /b ";
#endif
-
-
-// command += "\""+ crea::System::GetExecutablePath();
-//#ifdef MACOSX
-// command += separator + "../../../bbi.app/Contents/MacOS";
-//#endif
-
- command += "bbi ";
- command += "\""+filename + "\"";
-
- #ifndef WIN32
- command += " & ";
- #endif
-
- printf ("RaC wxGUIEditorGraphicBBS::executeScript %s \n" , command.c_str() );
- system( command.c_str() );
- }
- //=========================================================================
- // EVENT HANDLERS
- //=========================================================================
+ // command += "\""+ crea::System::GetExecutablePath();
+ //#ifdef MACOSX
+ // command += separator + "../../../bbi.app/Contents/MacOS";
+ //#endif
- void wxGUIEditorGraphicBBS::OnCreateNewTab(wxCommandEvent& event)
- {
- _tabsMgr->addNewTab();
- refreshGUIControls();
- }
+ command += "bbi ";
+ command += "\"" + filename + "\"";
- //=========================================================================
+#ifndef WIN32
+ command += " & ";
+#endif
- void wxGUIEditorGraphicBBS::OnExecuteActualDiagram(wxCommandEvent& event)
- {
- std::string script1 = _tabsMgr->getActualDiagramBBS(true);
- cout<<endl<<"RaC wxGUIEditorGraphicBBS::executeActualDiagram SCRIPT"<<endl<<endl;
- cout<<script1<<endl;
+ printf("RaC wxGUIEditorGraphicBBS::executeScript %s \n", command.c_str());
+ system(command.c_str());
+}
+
+//=========================================================================
+// EVENT HANDLERS
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::OnCreateNewTab(wxCommandEvent& event) {
+ _tabsMgr->addNewTab();
+ refreshGUIControls();
+}
- std::string script2 = _tabsMgr->getActualDiagramBBS(false);
- executeScript(script2);
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::OnExecuteActualDiagram(wxCommandEvent& event) {
+ std::string script1 = _tabsMgr->getActualDiagramBBS(true);
+ cout << endl << "RaC wxGUIEditorGraphicBBS::executeActualDiagram SCRIPT"
+ << endl << endl;
+ cout << script1 << endl;
+
+ std::string script2 = _tabsMgr->getActualDiagramBBS(false);
+ executeScript(script2);
+}
+
+//=========================================================================
+// HANDLERS
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnOpenBBS(wxCommandEvent& event) {
+ wxFileDialog * openFileDialog = new wxFileDialog(this, wxT("Open BBS"),
+ wxEmptyString, wxT("NewBBS"), wxT("*.bbs"), wxOPEN);
+ if (openFileDialog->ShowModal() == wxID_OK) {
+ wxString fileName = openFileDialog->GetPath();
+
+ _tabsMgr->addNewTab(openFileDialog->GetFilename());
+
+ bbtk::InterpreterBBS::Pointer I = bbtk::InterpreterBBS::New(
+ this->_tabsMgr->getActualTabPanel()->getSceneManager(),
+ _pkgBrowser->GetFactory());
+
+ // We tell the interpreter to throw exceptions on error
+ I->SetThrow(true);
+ // Interpret the file supposed to define a box called 'Processing'
+ I->InterpretFile((const char*) (fileName.mb_str()));
+ }
+ refreshGUIControls();
+}
+
+void wxGUIEditorGraphicBBS::SaveActualBBS(std::string filename) {
+ ofstream file;
+
+ //EED file.open(fileName.c_str());
+ file.open(filename.c_str());
+ std::string content = "";
+ // writing file header
+ content += "# ----------------------------------\n";
+ content += "# - BBTKGEditor v 1.2 BBS BlackBox Script\n";
+ content += "# - ";
+ content += filename;
+ content += "\n";
+ content += "# ----------------------------------\n";
+ content += "\n";
+ content += _tabsMgr->getActualDiagramBBS();
+ file << content;
+ file.close();
+}
+
+void wxGUIEditorGraphicBBS::OnSaveActualBBS(wxCommandEvent& event) {
+ wxFileDialog * saveFileDialog = new wxFileDialog(this,
+ wxT("Save actual BBS"), wxEmptyString, wxT("NewBBS"),
+ wxT("*.bbs"), wxSAVE | wxOVERWRITE_PROMPT);
+ if (saveFileDialog->ShowModal() == wxID_OK) {
+ wxString fileName = saveFileDialog->GetPath();
+ SaveActualBBS((const char*) (fileName.mb_str()));
+ }
+
+}
+
+void wxGUIEditorGraphicBBS::AskComplexBoxConfiguration() {
+ std::string cbName = _tabsMgr->GetCbName();
+ std::string paName = _tabsMgr->GetCbPackageName();
+
+ wxTextEntryDialog *cbNameDialog = new wxTextEntryDialog(this,
+ wxT("Complex Box name"));
+ wxTextEntryDialog *paNameDialog = new wxTextEntryDialog(this,
+ wxT("Package name"));
+
+ cbNameDialog->SetValue(wxString(cbName.c_str(), wxConvUTF8));
+ paNameDialog->SetValue(wxString(paName.c_str(), wxConvUTF8));
+
+ if (cbNameDialog->ShowModal() == wxID_OK) {
+ wxString complexboxname = cbNameDialog->GetValue();
+ cbName = (const char*) (complexboxname.mb_str());
+ }
+
+ if (paNameDialog->ShowModal() == wxID_OK) {
+ wxString packagename = paNameDialog->GetValue();
+ paName = (const char*) (packagename.mb_str());
+ }
+
+ _tabsMgr->SetCbName(cbName);
+ _tabsMgr->SetCbPackageName(paName);
+}
+
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::SaveActualComplexBox(std::string filename) {
+ ofstream file;
+ file.open(filename.c_str());
+
+ std::string content = "";
+
+ // writing file header
+ content += "# ----------------------------------\n";
+ content += "# - BBTKGEditor v 1.2 BBS BlackBox Script (Complex Box)\n";
+ content += "# - ";
+ content += filename;
+ content += "\n";
+ content += "# ----------------------------------\n";
+ content += "\n";
+ content += _tabsMgr->getActualComplexBoxBBS();
+ file << content;
+ file.close();
+}
+
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::OnSaveActualComplexBox(wxCommandEvent& event) {
+ wxFileDialog * saveFileDialog = new wxFileDialog(this,
+ wxT("Save Complex Box BBS"), wxEmptyString,
+ _T("ComplexBoxName"), wxT("*.bbs"), wxSAVE
+ | wxOVERWRITE_PROMPT);
+ if (saveFileDialog->ShowModal() == wxID_OK) {
+ wxString fileName = saveFileDialog->GetPath();
+ SaveActualComplexBox((const char*) (fileName.mb_str()));
+ }
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::SaveActualDiagram(std::string filename) {
+ ofstream file;
+ file.open(filename.c_str());
+
+ std::string content = "";
+
+ // writing file header
+ content += "# ----------------------------------\n";
+ content += "# - BBTKGEditor v 1.2 BBG BlackBox Diagram file\n";
+ content += "# - ";
+
+ content += filename;
+
+ content += "\n";
+ content += "# ----------------------------------\n";
+ content += "\n";
+ content += "APP_START\n";
+ _tabsMgr->saveActualDiagram(content, filename); //DFCH
+ content += "APP_END\n";
+ file << content;
+ file.close();
+}
+
+//=========================================================================
+
+//The following method allows to save the current diagram asking the filename
+//DFCH
+void wxGUIEditorGraphicBBS::SaveCurrentDiagramAs() {
+ wxFileDialog * saveFileDialog = new wxFileDialog(this,
+ wxT("Save current diagram"), wxEmptyString, wxT("NewDiagram"),
+ wxT("*.bbg"), wxSAVE | wxOVERWRITE_PROMPT);
+ if (saveFileDialog->ShowModal() == wxID_OK) {
+ _tabsMgr->SetNameTabPanel(saveFileDialog->GetFilename());
+ wxString pathfileName = saveFileDialog->GetPath();
+ std::string pathfilename = (const char*) (pathfileName.mb_str());
+ std::string pathfilenamebbs = pathfilename;
+ pathfilenamebbs[pathfilenamebbs.length() - 1] = 's';
+ if (_tabsMgr->isActualDiagramComplexBox() == false) {
+ SaveActualDiagram(pathfilename);
+ SaveActualBBS(pathfilenamebbs);
+ } else {
+ AskComplexBoxConfiguration();
+ SaveActualDiagram(pathfilename);
+ SaveActualComplexBox(pathfilenamebbs);
+ } //if isActualDiagramComplexBox
+ } // if saveFileDialog
+}
+//=========================================================================
+//DFCH
+void wxGUIEditorGraphicBBS::OnSaveActualDiagram(wxCommandEvent& event) {
+ std::string pathfilename = _tabsMgr->GetCurrentTabPanelPath();
+ if (pathfilename.empty()) {
+ SaveCurrentDiagramAs();
+ } else {
+ std::string pathfilenamebbs = pathfilename;
+ pathfilenamebbs[pathfilenamebbs.length() - 1] = 's';
+
+ if (_tabsMgr->isActualDiagramComplexBox() == false) {
+ SaveActualDiagram(pathfilename);
+ SaveActualBBS(pathfilenamebbs);
+ } else {
+ AskComplexBoxConfiguration();
+ SaveActualDiagram(pathfilename);
+ SaveActualComplexBox(pathfilenamebbs);
+ } //if isActualDiagramComplexBox
}
+}
+//=========================================================================
+//DFCH
+void wxGUIEditorGraphicBBS::OnSaveAsActualDiagram(wxCommandEvent& event) {
+ SaveCurrentDiagramAs();
+}
+//=========================================================================
+void wxGUIEditorGraphicBBS::refreshGUIControls() {
+ wxToolBar* toolbar = GetToolBar();
+ if (_tabsMgr->isActualDiagramComplexBox()) {
+ toolbar->ToggleTool(ID_BTNCOMPLEXBOX, true);
+ toolbar->EnableTool(ID_ADDCOMPLEXBOXINPUT, true);
+ toolbar->EnableTool(ID_ADDCOMPLEXBOXOUTPUT, true);
- //=========================================================================
- // HANDLERS
- //=========================================================================
- void wxGUIEditorGraphicBBS::OnOpenBBS(wxCommandEvent& event)
- {
- wxFileDialog * openFileDialog = new wxFileDialog(this,wxT("Open BBS"),wxEmptyString,wxT("NewBBS"),wxT("*.bbs"),wxOPEN);
- if (openFileDialog->ShowModal() == wxID_OK)
- {
- wxString fileName = openFileDialog->GetPath( );
+ GetMenuBar()->GetMenu(0)->Enable(ID_SAVE_AS_COMPLEXBOX, true);
+ GetMenuBar()->GetMenu(0)->Enable(ID_SAVE_AS_BBS, false);
+ } else {
+ toolbar->ToggleTool(ID_BTNCOMPLEXBOX, false);
+ toolbar->EnableTool(ID_ADDCOMPLEXBOXINPUT, false);
+ toolbar->EnableTool(ID_ADDCOMPLEXBOXOUTPUT, false);
-
- _tabsMgr->addNewTab( openFileDialog->GetFilename() );
-
- bbtk::InterpreterBBS::Pointer I = bbtk::InterpreterBBS::New( this->_tabsMgr->getActualTabPanel()->getSceneManager() , _pkgBrowser->GetFactory());
-
- // We tell the interpreter to throw exceptions on error
- I->SetThrow(true);
- // Interpret the file supposed to define a box called 'Processing'
- I->InterpretFile( (const char*) (fileName.mb_str()) );
- }
- refreshGUIControls();
+ GetMenuBar()->GetMenu(0)->Enable(ID_SAVE_AS_COMPLEXBOX, false);
+ GetMenuBar()->GetMenu(0)->Enable(ID_SAVE_AS_BBS, true);
}
-
-
- void wxGUIEditorGraphicBBS::SaveActualBBS(std::string filename)
- {
- ofstream file;
-
-//EED file.open(fileName.c_str());
- file.open( filename.c_str() );
- std::string content="";
- // writing file header
- content += "# ----------------------------------\n";
- content += "# - BBTKGEditor v 1.2 BBS BlackBox Script\n";
- content += "# - ";
- content += filename;
- content += "\n";
- content += "# ----------------------------------\n";
- content += "\n";
- content += _tabsMgr->getActualDiagramBBS();
- file << content;
- file.close();
+ if (_tabsMgr->getNumActualSelectedObjects() > 0) {
+ GetMenuBar()->GetMenu(1)->Enable(ID_COPY_TO_COMPLEXDIAGRAM, true);
+ } else {
+ ///TODO Fix the possibility to say from the SceneManager to the GUI to refresh the options
+ GetMenuBar()->GetMenu(1)->Enable(ID_COPY_TO_COMPLEXDIAGRAM, true);
}
+}
- void wxGUIEditorGraphicBBS::OnSaveActualBBS(wxCommandEvent& event)
- {
- wxFileDialog * saveFileDialog = new wxFileDialog(this,wxT("Save actual BBS"),wxEmptyString,wxT("NewBBS"),wxT("*.bbs"),wxSAVE|wxOVERWRITE_PROMPT);
- if (saveFileDialog->ShowModal() == wxID_OK)
- {
- wxString fileName = saveFileDialog->GetPath( );
- SaveActualBBS( (const char*) (fileName.mb_str()) );
- }
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnDeleteAllBoxesActualDiagram(wxCommandEvent& event) {
+ wxMessageDialog *dial = new wxMessageDialog(NULL,
+ wxT("Are you sure to delete all boxes of the diagram?"),
+ wxT("Delete all boxes"), wxYES_NO | wxNO_DEFAULT
+ | wxICON_QUESTION);
+ if (dial->ShowModal() == wxID_YES) {
+ _tabsMgr->deleteAllBoxesActualDiagram();
}
+}
+//=========================================================================
- void wxGUIEditorGraphicBBS::AskComplexBoxConfiguration()
- {
- std::string cbName = _tabsMgr->GetCbName();
- std::string paName = _tabsMgr->GetCbPackageName();
+void wxGUIEditorGraphicBBS::OnCenterViewActualDiagram(wxCommandEvent& event) {
+ _tabsMgr->centerViewActualDiagram();
+}
- wxTextEntryDialog *cbNameDialog = new wxTextEntryDialog(this,wxT("Complex Box name"));
- wxTextEntryDialog *paNameDialog = new wxTextEntryDialog(this,wxT("Package name"));
+//=========================================================================
- cbNameDialog->SetValue( wxString(cbName.c_str(),wxConvUTF8) );
- paNameDialog->SetValue( wxString(paName.c_str(),wxConvUTF8) );
+void wxGUIEditorGraphicBBS::OnOpenDiagram(wxCommandEvent& event) {
+ wxFileDialog * openFileDialog = new wxFileDialog(this, wxT("Open diagram"),
+ wxEmptyString, wxT(""), wxT("*.bbg"), wxOPEN | wxFILE_MUST_EXIST);
+ if (openFileDialog->ShowModal() == wxID_OK) {
+ wxString fileName = openFileDialog->GetPath();
+ ifstream inputStream;
+ std::string fName = (const char*) (fileName.mb_str());
+ inputStream.open(fName.c_str());
+ _tabsMgr->addNewTab(openFileDialog->GetFilename());
- if (cbNameDialog->ShowModal() == wxID_OK)
- {
- wxString complexboxname = cbNameDialog->GetValue();
- cbName=(const char*) (complexboxname.mb_str());
- }
-
-
- if (paNameDialog->ShowModal() == wxID_OK)
- {
- wxString packagename = paNameDialog->GetValue();
- paName=(const char*) (packagename.mb_str());
- }
+ _tabsMgr->loadDiagram(inputStream, fName);
- _tabsMgr->SetCbName(cbName);
- _tabsMgr->SetCbPackageName(paName);
- }
-
- //=========================================================================
-
- void wxGUIEditorGraphicBBS::SaveActualComplexBox(std::string filename)
- {
- ofstream file;
- file.open( filename.c_str() );
-
- std::string content="";
-
- // writing file header
- content += "# ----------------------------------\n";
- content += "# - BBTKGEditor v 1.2 BBS BlackBox Script (Complex Box)\n";
- content += "# - ";
- content += filename;
- content += "\n";
- content += "# ----------------------------------\n";
- content += "\n";
- content += _tabsMgr->getActualComplexBoxBBS();
- file << content;
- file.close();
+ inputStream.close();
}
+ refreshGUIControls();
+}
- //=========================================================================
+//=========================================================================
- void wxGUIEditorGraphicBBS::OnSaveActualComplexBox(wxCommandEvent& event)
- {
- wxFileDialog * saveFileDialog = new wxFileDialog(this ,wxT("Save Complex Box BBS") ,wxEmptyString, _T("ComplexBoxName") ,wxT("*.bbs"), wxSAVE | wxOVERWRITE_PROMPT);
- if (saveFileDialog->ShowModal() == wxID_OK)
- {
- wxString fileName = saveFileDialog->GetPath();
- SaveActualComplexBox( (const char*) (fileName.mb_str()) );
- }
- }
-
- //=========================================================================
- void wxGUIEditorGraphicBBS::SaveActualDiagram(std::string filename)
- {
- ofstream file;
- file.open( filename.c_str() );
-
- std::string content="";
-
- // writing file header
- content += "# ----------------------------------\n";
- content += "# - BBTKGEditor v 1.2 BBG BlackBox Diagram file\n";
- content += "# - ";
-
- content += filename;
-
- content += "\n";
- content += "# ----------------------------------\n";
- content += "\n";
- content += "APP_START\n";
- _tabsMgr->saveActualDiagram(content, filename); //DFCH
- content += "APP_END\n";
- file << content;
- file.close();
- }
-
- //=========================================================================
-
- //The following method allows to save the current diagram asking the filename
- //DFCH
- void wxGUIEditorGraphicBBS::SaveCurrentDiagramAs( )
- {
- wxFileDialog * saveFileDialog = new wxFileDialog(this,wxT("Save current diagram"),wxEmptyString,wxT("NewDiagram"),wxT("*.bbg"),wxSAVE|wxOVERWRITE_PROMPT);
- if (saveFileDialog->ShowModal() == wxID_OK)
- {
- _tabsMgr->SetNameTabPanel( saveFileDialog->GetFilename() );
- wxString pathfileName = saveFileDialog->GetPath();
- std::string pathfilename = (const char*) (pathfileName.mb_str());
- std::string pathfilenamebbs = pathfilename;
- pathfilenamebbs[pathfilenamebbs.length()-1]='s';
- if (_tabsMgr->isActualDiagramComplexBox()==false)
- {
- SaveActualDiagram( pathfilename );
- SaveActualBBS(pathfilenamebbs);
- } else {
- AskComplexBoxConfiguration();
- SaveActualDiagram( pathfilename );
- SaveActualComplexBox(pathfilenamebbs);
- } //if isActualDiagramComplexBox
- } // if saveFileDialog
- }
- //=========================================================================
- //DFCH
- void wxGUIEditorGraphicBBS::OnSaveActualDiagram(wxCommandEvent& event)
- {
- std::string pathfilename = _tabsMgr->GetCurrentTabPanelPath();
- if( pathfilename.empty() )
- {
- SaveCurrentDiagramAs();
- }
- else
- {
- std::string pathfilenamebbs = pathfilename;
- pathfilenamebbs[pathfilenamebbs.length()-1]='s';
-
- if (_tabsMgr->isActualDiagramComplexBox()==false)
- {
- SaveActualDiagram( pathfilename );
- SaveActualBBS(pathfilenamebbs);
- } else {
- AskComplexBoxConfiguration();
- SaveActualDiagram( pathfilename );
- SaveActualComplexBox(pathfilenamebbs);
- } //if isActualDiagramComplexBox
- }
- }
- //=========================================================================
- //DFCH
- void wxGUIEditorGraphicBBS::OnSaveAsActualDiagram(wxCommandEvent& event)
- {
- SaveCurrentDiagramAs();
- }
- //=========================================================================
-
- void wxGUIEditorGraphicBBS::refreshGUIControls()
- {
- wxToolBar* toolbar = GetToolBar();
- if(_tabsMgr->isActualDiagramComplexBox())
- {
- toolbar->ToggleTool(ID_BTNCOMPLEXBOX,true);
- toolbar->EnableTool(ID_ADDCOMPLEXBOXINPUT,true);
- toolbar->EnableTool(ID_ADDCOMPLEXBOXOUTPUT,true);
-
- GetMenuBar()->GetMenu(0)->Enable(ID_SAVE_AS_COMPLEXBOX,true);
- GetMenuBar()->GetMenu(0)->Enable(ID_SAVE_AS_BBS,false);
- }
- else
- {
- toolbar->ToggleTool(ID_BTNCOMPLEXBOX,false);
- toolbar->EnableTool(ID_ADDCOMPLEXBOXINPUT,false);
- toolbar->EnableTool(ID_ADDCOMPLEXBOXOUTPUT,false);
-
- GetMenuBar()->GetMenu(0)->Enable(ID_SAVE_AS_COMPLEXBOX,false);
- GetMenuBar()->GetMenu(0)->Enable(ID_SAVE_AS_BBS,true);
- }
- if(_tabsMgr->getNumActualSelectedObjects()>0)
- {
- GetMenuBar()->GetMenu(1)->Enable(ID_COPY_TO_COMPLEXDIAGRAM,true);
- }
- else
- {
- ///TODO Fix the possibility to say from the SceneManager to the GUI to refresh the options
- GetMenuBar()->GetMenu(1)->Enable(ID_COPY_TO_COMPLEXDIAGRAM,true);
- }
-
- }
+void wxGUIEditorGraphicBBS::OnClickBtnBox(wxCommandEvent& event) {
+ BlackBoxDescriptor *bbDes = _pkgBrowser->GetActualSelected();
+ if (bbDes != NULL) {
+ std::string typeName = bbDes->GetTypeName();
+ std::string packageName = bbDes->GetPackage()->GetName();
- //=========================================================================
+ wxGEditorTabPanel *pnl = this->_tabsMgr->getActualTabPanel();
- void wxGUIEditorGraphicBBS::OnDeleteAllBoxesActualDiagram(wxCommandEvent& event)
- {
- wxMessageDialog *dial = new wxMessageDialog(NULL, wxT("Are you sure to delete all boxes of the diagram?"), wxT("Delete all boxes"), wxYES_NO | wxNO_DEFAULT | wxICON_QUESTION);
- if(dial->ShowModal() == wxID_YES)
- {
- _tabsMgr->deleteAllBoxesActualDiagram();
- }
- }
+ if (pnl != NULL) {
+ wxVtkSceneManager *scn = pnl->getSceneManager();
+ scn->createGBlackBox(50, 50, packageName, typeName);
+ scn->refresh();
+ } // if pnl
+ }// if bbDes
+}
- //=========================================================================
+//=========================================================================
- void wxGUIEditorGraphicBBS::OnCenterViewActualDiagram(wxCommandEvent& event)
- {
- _tabsMgr->centerViewActualDiagram();
- }
-
- //=========================================================================
-
- void wxGUIEditorGraphicBBS::OnOpenDiagram(wxCommandEvent& event)
- {
- wxFileDialog * openFileDialog = new wxFileDialog(this,wxT("Open diagram"),wxEmptyString,wxT(""),wxT("*.bbg"),wxOPEN|wxFILE_MUST_EXIST);
- if (openFileDialog->ShowModal() == wxID_OK)
- {
- wxString fileName = openFileDialog->GetPath();
- ifstream inputStream;
- std::string fName=(const char*) (fileName.mb_str());
- inputStream.open( fName.c_str() );
- _tabsMgr->addNewTab( openFileDialog->GetFilename() );
-
- _tabsMgr->loadDiagram(inputStream, fName);
+void wxGUIEditorGraphicBBS::OnClickBtnExecutableBox(wxCommandEvent& event) {
+ //DFCH
+ wxGEditorTabPanel *pnl = this->_tabsMgr->getActualTabPanel();
- inputStream.close();
- }
- refreshGUIControls();
+ if (pnl != NULL) {
+ wxVtkSceneManager *scn = pnl->getSceneManager();
+ if( scn->MakeBoxExecutable() )
+ std::cout<<"DFCH: wxGUIEditorGraphicBBS::OnClickBtnExecutableBox...successful"<<std::endl;
+ else
+ std::cout<<"DFCH: wxGUIEditorGraphicBBS::OnClickBtnExecutableBox...Error!!"<<std::endl;
}
+ //DFCH
- //=========================================================================
-
-
- void wxGUIEditorGraphicBBS::OnClickBtnBox(wxCommandEvent& event)
- {
- BlackBoxDescriptor *bbDes = _pkgBrowser->GetActualSelected();
- if (bbDes!=NULL)
- {
- std::string typeName = bbDes->GetTypeName();
- std::string packageName = bbDes->GetPackage()->GetName();
-
+}
- wxGEditorTabPanel *pnl = this->_tabsMgr->getActualTabPanel();
+//=========================================================================
- if (pnl!=NULL)
- {
- wxVtkSceneManager *scn = pnl->getSceneManager();
- scn->createGBlackBox(50,50,packageName, typeName);
- scn->refresh();
- } // if pnl
- }// if bbDes
+void wxGUIEditorGraphicBBS::OnClickBtnComplexBox(wxCommandEvent& event) {
+ wxToolBar* toolbar = GetToolBar();
+ bool temp = toolbar->GetToolState(ID_BTNCOMPLEXBOX);
+ if (temp) {
+ _tabsMgr->setActualDiagramComplexBox(true);
+ } else {
+ _tabsMgr->setActualDiagramComplexBox(false);
}
+ refreshGUIControls();
+}
- //=========================================================================
+//=========================================================================
- void wxGUIEditorGraphicBBS::OnClickBtnExecutableBox(wxCommandEvent& event)
- {
- printf("EED wxGUIEditorGraphicBBS::OnClickBtnExecutableBox .... not implemented ...\n");
- }
-
- //=========================================================================
-
- void wxGUIEditorGraphicBBS::OnClickBtnComplexBox(wxCommandEvent& event)
- {
- wxToolBar* toolbar = GetToolBar();
- bool temp = toolbar->GetToolState(ID_BTNCOMPLEXBOX);
- if(temp)
- {
- _tabsMgr->setActualDiagramComplexBox(true);
+void wxGUIEditorGraphicBBS::OnAddComplexBoxInput(wxCommandEvent& event) {
+ wxTextEntryDialog *nameDialog = new wxTextEntryDialog(this,
+ wxT("Name of input port"));
+ if (nameDialog->ShowModal() == wxID_OK) {
+ wxString fileName = nameDialog->GetValue();
+ if (!fileName.IsEmpty()) {
+ std::string portName = (const char*) (fileName.mb_str());
+ _tabsMgr->addActualDiagramComplexInputPort(portName);
}
- else
- {
- _tabsMgr->setActualDiagramComplexBox(false);
- }
- refreshGUIControls();
}
+}
- //=========================================================================
-
- void wxGUIEditorGraphicBBS::OnAddComplexBoxInput(wxCommandEvent& event)
- {
- wxTextEntryDialog *nameDialog = new wxTextEntryDialog(this,wxT("Name of input port"));
- if (nameDialog->ShowModal() == wxID_OK)
- {
- wxString fileName = nameDialog->GetValue();
- if(!fileName.IsEmpty())
- {
- std::string portName=(const char*) (fileName.mb_str());
- _tabsMgr->addActualDiagramComplexInputPort(portName);
- }
- }
- }
+//=========================================================================
- //=========================================================================
-
- void wxGUIEditorGraphicBBS::OnAddComplexBoxOutput(wxCommandEvent& event)
- {
- wxTextEntryDialog *nameDialog = new wxTextEntryDialog(this,wxT("Name of output port"));
- if (nameDialog->ShowModal() == wxID_OK)
- {
- wxString fileName = nameDialog->GetValue();
- if(!fileName.IsEmpty())
- {
- std::string portName=(const char*) (fileName.mb_str());
- _tabsMgr->addActualDiagramComplexOutputPort(portName);
- }
+void wxGUIEditorGraphicBBS::OnAddComplexBoxOutput(wxCommandEvent& event) {
+ wxTextEntryDialog *nameDialog = new wxTextEntryDialog(this,
+ wxT("Name of output port"));
+ if (nameDialog->ShowModal() == wxID_OK) {
+ wxString fileName = nameDialog->GetValue();
+ if (!fileName.IsEmpty()) {
+ std::string portName = (const char*) (fileName.mb_str());
+ _tabsMgr->addActualDiagramComplexOutputPort(portName);
}
}
-
- //=========================================================================
-
- void wxGUIEditorGraphicBBS::OnCopySelectedToComplexDiagram(wxCommandEvent& event)
- {
- _tabsMgr->copySelectedBBoxesToComplexDiagram();
- }
-
-
- void wxGUIEditorGraphicBBS::OnHelpBBeditor(wxCommandEvent& event)
- {
- printf("wxGUIEditorGraphicBBS::OnHelpBBeditor ....not implemented..\n");
- }
-
-
- //=========================================================================
- void wxGUIEditorGraphicBBS::OnCreatePackage(wxCommandEvent& event)
- {
- printf("EED wxGUIEditorGraphicBBS::OnCreatePackag ... not implemented ..\n");
- }
-
-
- //=========================================================================
- void wxGUIEditorGraphicBBS::OnCreateBlackBox(wxCommandEvent& event)
- {
- printf("EED wxGUIEditorGraphicBBS::OnCreateBlackBox ... not implemented ..\n");
- }
- //=========================================================================
- void wxGUIEditorGraphicBBS::OnPlugPackage(wxCommandEvent& event)
- {
- printf("EED wxGUIEditorGraphicBBS::OnPlugPackage ... not implemented ..\n");
- }
- //=========================================================================
- void wxGUIEditorGraphicBBS::OnEditConfig(wxCommandEvent& event)
- {
- printf("EED wxGUIEditorGraphicBBS::OnEditConfig ... not implemented ..\n");
- }
- //=========================================================================
- void wxGUIEditorGraphicBBS::OnShowHTMLDoc(wxCommandEvent& event)
- {
- printf("EED wxGUIEditorGraphicBBS::OnShowHTMLDoc ... not implemented ..\n");
- }
- //=========================================================================
- void wxGUIEditorGraphicBBS::OnCreateIndex(wxCommandEvent& event)
- {
- printf("EED wxGUIEditorGraphicBBS::OnCreateIndex ... not implemented ..\n");
- }
-
-
-
-
- //=========================================================================
-
- void wxGUIEditorGraphicBBS::OnExit(wxCommandEvent& event)
- {
- Close(true);
- }
-
-
-
- //=========================================================================
-
-} // EO namespace bbtk
+}
+
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::OnCopySelectedToComplexDiagram(
+ wxCommandEvent& event) {
+ _tabsMgr->copySelectedBBoxesToComplexDiagram();
+}
+
+void wxGUIEditorGraphicBBS::OnHelpBBeditor(wxCommandEvent& event) {
+ printf("wxGUIEditorGraphicBBS::OnHelpBBeditor ....not implemented..\n");
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnCreatePackage(wxCommandEvent& event) {
+ printf("EED wxGUIEditorGraphicBBS::OnCreatePackag ... not implemented ..\n");
+}
+
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnCreateBlackBox(wxCommandEvent& event) {
+ printf(
+ "EED wxGUIEditorGraphicBBS::OnCreateBlackBox ... not implemented ..\n");
+}
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnPlugPackage(wxCommandEvent& event) {
+ printf("EED wxGUIEditorGraphicBBS::OnPlugPackage ... not implemented ..\n");
+}
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnEditConfig(wxCommandEvent& event) {
+ printf("EED wxGUIEditorGraphicBBS::OnEditConfig ... not implemented ..\n");
+}
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnShowHTMLDoc(wxCommandEvent& event) {
+ printf("EED wxGUIEditorGraphicBBS::OnShowHTMLDoc ... not implemented ..\n");
+}
+//=========================================================================
+void wxGUIEditorGraphicBBS::OnCreateIndex(wxCommandEvent& event) {
+ printf("EED wxGUIEditorGraphicBBS::OnCreateIndex ... not implemented ..\n");
+}
+
+//=========================================================================
+
+void wxGUIEditorGraphicBBS::OnExit(wxCommandEvent& event) {
+ Close(true);
+}
+
+//=========================================================================
+
+} // EO namespace bbtk
// EOF
git://git.creatis.insa-lyon.fr / bbtkGEditor.git / blobdiff