From: Eduardo DAVILA Date: Wed, 5 Jun 2013 14:24:21 +0000 (+0200) Subject: 2018 BUG Take out the SQLite(dll lib h) from source and put it in creaThirdPartyLib... X-Git-Url: https://git.creatis.insa-lyon.fr/pubgit/?p=creaImageIO.git;a=commitdiff_plain;h=8ef5e3c50a34b84d6097e994e5d21ff99f081ece 2018 BUG Take out the SQLite(dll lib h) from source and put it in creaThirdPartyLibrary mechanism --- diff --git a/win32/CMakeLists.txt b/win32/CMakeLists.txt deleted file mode 100644 index 0903896..0000000 --- a/win32/CMakeLists.txt +++ /dev/null @@ -1,30 +0,0 @@ -# --------------------------------------------------------------------- -# -# Copyright (c) CREATIS (Centre de Recherche en Acquisition et Traitement de l'Image -# pour la Santé) -# Authors : Eduardo Davila, Frederic Cervenansky, Claire Mouton -# Previous Authors : Laurent Guigues, Jean-Pierre Roux -# CreaTools website : www.creatis.insa-lyon.fr/site/fr/creatools_accueil -# -# This software is governed by the CeCILL-B license under French law and -# abiding by the rules of distribution of free software. You can use, -# modify and/ or redistribute the software under the terms of the CeCILL-B -# license as circulated by CEA, CNRS and INRIA at the following URL -# http://www.cecill.info/licences/Licence_CeCILL-B_V1-en.html -# or in the file LICENSE.txt. -# -# As a counterpart to the access to the source code and rights to copy, -# modify and redistribute granted by the license, users are provided only -# with a limited warranty and the software's author, the holder of the -# economic rights, and the successive licensors have only limited -# liability. -# -# The fact that you are presently reading this means that you have had -# knowledge of the CeCILL-B license and that you accept its terms. -# ------------------------------------------------------------------------ - -IF (WIN32) - configure_file(sqlite3.dll ${PROJECT_BINARY_DIR}/Debug/sqlite3.dll COPYONLY) - configure_file(sqlite3.dll ${PROJECT_BINARY_DIR}/Release/sqlite3.dll COPYONLY) - configure_file(sqlite3.dll ${PROJECT_BINARY_DIR}/RelWithDebInfo/sqlite3.dll COPYONLY) -ENDIF(WIN32) \ No newline at end of file diff --git a/win32/sqlite3.dll b/win32/sqlite3.dll deleted file mode 100644 index 7b07c55..0000000 Binary files a/win32/sqlite3.dll and /dev/null differ diff --git a/win32/sqlite3.h b/win32/sqlite3.h deleted file mode 100644 index d72fdbd..0000000 --- a/win32/sqlite3.h +++ /dev/null @@ -1,5734 +0,0 @@ -/* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This header file defines the interface that the SQLite library -** presents to client programs. If a C-function, structure, datatype, -** or constant definition does not appear in this file, then it is -** not a published API of SQLite, is subject to change without -** notice, and should not be referenced by programs that use SQLite. -** -** Some of the definitions that are in this file are marked as -** "experimental". Experimental interfaces are normally new -** features recently added to SQLite. We do not anticipate changes -** to experimental interfaces but reserve the right to make minor changes -** if experience from use "in the wild" suggest such changes are prudent. -** -** The official C-language API documentation for SQLite is derived -** from comments in this file. This file is the authoritative source -** on how SQLite interfaces are suppose to operate. -** -** The name of this file under configuration management is "sqlite.h.in". -** The makefile makes some minor changes to this file (such as inserting -** the version number) and changes its name to "sqlite3.h" as -** part of the build process. -*/ -#ifndef _SQLITE3_H_ -#define _SQLITE3_H_ -#include /* Needed for the definition of va_list */ - -/* -** Make sure we can call this stuff from C++. -*/ -#ifdef __cplusplus -extern "C" { -#endif - - -/* -** Add the ability to override 'extern' -*/ -#ifndef SQLITE_EXTERN -# define SQLITE_EXTERN extern -#endif - -#ifndef SQLITE_API -# define SQLITE_API -#endif - - -/* -** These no-op macros are used in front of interfaces to mark those -** interfaces as either deprecated or experimental. New applications -** should not use deprecated interfaces - they are support for backwards -** compatibility only. Application writers should be aware that -** experimental interfaces are subject to change in point releases. -** -** These macros used to resolve to various kinds of compiler magic that -** would generate warning messages when they were used. But that -** compiler magic ended up generating such a flurry of bug reports -** that we have taken it all out and gone back to using simple -** noop macros. -*/ -#define SQLITE_DEPRECATED -#define SQLITE_EXPERIMENTAL - -/* -** Ensure these symbols were not defined by some previous header file. -*/ -#ifdef SQLITE_VERSION -# undef SQLITE_VERSION -#endif -#ifdef SQLITE_VERSION_NUMBER -# undef SQLITE_VERSION_NUMBER -#endif - -/* -** CAPI3REF: Compile-Time Library Version Numbers -** -** ^(The [SQLITE_VERSION] C preprocessor macro in the sqlite3.h header -** evaluates to a string literal that is the SQLite version in the -** format "X.Y.Z" where X is the major version number (always 3 for -** SQLite3) and Y is the minor version number and Z is the release number.)^ -** ^(The [SQLITE_VERSION_NUMBER] C preprocessor macro resolves to an integer -** with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z are the same -** numbers used in [SQLITE_VERSION].)^ -** The SQLITE_VERSION_NUMBER for any given release of SQLite will also -** be larger than the release from which it is derived. Either Y will -** be held constant and Z will be incremented or else Y will be incremented -** and Z will be reset to zero. -** -** Since version 3.6.18, SQLite source code has been stored in the -** Fossil configuration management -** system. ^The SQLITE_SOURCE_ID macro evalutes to -** a string which identifies a particular check-in of SQLite -** within its configuration management system. ^The SQLITE_SOURCE_ID -** string contains the date and time of the check-in (UTC) and an SHA1 -** hash of the entire source tree. -** -** See also: [sqlite3_libversion()], -** [sqlite3_libversion_number()], [sqlite3_sourceid()], -** [sqlite_version()] and [sqlite_source_id()]. -*/ -#define SQLITE_VERSION "3.6.23.1" -#define SQLITE_VERSION_NUMBER 3006023 -#define SQLITE_SOURCE_ID "2010-03-26 22:28:06 b078b588d617e07886ad156e9f54ade6d823568e" - -/* -** CAPI3REF: Run-Time Library Version Numbers -** KEYWORDS: sqlite3_version, sqlite3_sourceid -** -** These interfaces provide the same information as the [SQLITE_VERSION], -** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros -** but are associated with the library instead of the header file. ^(Cautious -** programmers might include assert() statements in their application to -** verify that values returned by these interfaces match the macros in -** the header, and thus insure that the application is -** compiled with matching library and header files. -** -** 
-** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
-** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 );
-** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 );
-**
)^ -** -** ^The sqlite3_version[] string constant contains the text of [SQLITE_VERSION] -** macro. ^The sqlite3_libversion() function returns a pointer to the -** to the sqlite3_version[] string constant. The sqlite3_libversion() -** function is provided for use in DLLs since DLL users usually do not have -** direct access to string constants within the DLL. ^The -** sqlite3_libversion_number() function returns an integer equal to -** [SQLITE_VERSION_NUMBER]. ^The sqlite3_sourceid() function returns -** a pointer to a string constant whose value is the same as the -** [SQLITE_SOURCE_ID] C preprocessor macro. -** -** See also: [sqlite_version()] and [sqlite_source_id()]. -*/ -SQLITE_API SQLITE_EXTERN const char sqlite3_version[]; -SQLITE_API const char *sqlite3_libversion(void); -SQLITE_API const char *sqlite3_sourceid(void); -SQLITE_API int sqlite3_libversion_number(void); - -#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS -/* -** CAPI3REF: Run-Time Library Compilation Options Diagnostics -** -** ^The sqlite3_compileoption_used() function returns 0 or 1 -** indicating whether the specified option was defined at -** compile time. ^The SQLITE_ prefix may be omitted from the -** option name passed to sqlite3_compileoption_used(). -** -** ^The sqlite3_compileoption_get() function allows interating -** over the list of options that were defined at compile time by -** returning the N-th compile time option string. ^If N is out of range, -** sqlite3_compileoption_get() returns a NULL pointer. ^The SQLITE_ -** prefix is omitted from any strings returned by -** sqlite3_compileoption_get(). -** -** ^Support for the diagnostic functions sqlite3_compileoption_used() -** and sqlite3_compileoption_get() may be omitted by specifing the -** [SQLITE_OMIT_COMPILEOPTION_DIAGS] option at compile time. -** -** See also: SQL functions [sqlite_compileoption_used()] and -** [sqlite_compileoption_get()] and the [compile_options pragma]. -*/ -SQLITE_API int sqlite3_compileoption_used(const char *zOptName); -SQLITE_API const char *sqlite3_compileoption_get(int N); -#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ - -/* -** CAPI3REF: Test To See If The Library Is Threadsafe -** -** ^The sqlite3_threadsafe() function returns zero if and only if -** SQLite was compiled mutexing code omitted due to the -** [SQLITE_THREADSAFE] compile-time option being set to 0. -** -** SQLite can be compiled with or without mutexes. When -** the [SQLITE_THREADSAFE] C preprocessor macro is 1 or 2, mutexes -** are enabled and SQLite is threadsafe. When the -** [SQLITE_THREADSAFE] macro is 0, -** the mutexes are omitted. Without the mutexes, it is not safe -** to use SQLite concurrently from more than one thread. -** -** Enabling mutexes incurs a measurable performance penalty. -** So if speed is of utmost importance, it makes sense to disable -** the mutexes. But for maximum safety, mutexes should be enabled. -** ^The default behavior is for mutexes to be enabled. -** -** This interface can be used by an application to make sure that the -** version of SQLite that it is linking against was compiled with -** the desired setting of the [SQLITE_THREADSAFE] macro. -** -** This interface only reports on the compile-time mutex setting -** of the [SQLITE_THREADSAFE] flag. If SQLite is compiled with -** SQLITE_THREADSAFE=1 or =2 then mutexes are enabled by default but -** can be fully or partially disabled using a call to [sqlite3_config()] -** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD], -** or [SQLITE_CONFIG_MUTEX]. ^(The return value of the -** sqlite3_threadsafe() function shows only the compile-time setting of -** thread safety, not any run-time changes to that setting made by -** sqlite3_config(). In other words, the return value from sqlite3_threadsafe() -** is unchanged by calls to sqlite3_config().)^ -** -** See the [threading mode] documentation for additional information. -*/ -SQLITE_API int sqlite3_threadsafe(void); - -/* -** CAPI3REF: Database Connection Handle -** KEYWORDS: {database connection} {database connections} -** -** Each open SQLite database is represented by a pointer to an instance of -** the opaque structure named "sqlite3". It is useful to think of an sqlite3 -** pointer as an object. The [sqlite3_open()], [sqlite3_open16()], and -** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()] -** is its destructor. There are many other interfaces (such as -** [sqlite3_prepare_v2()], [sqlite3_create_function()], and -** [sqlite3_busy_timeout()] to name but three) that are methods on an -** sqlite3 object. -*/ -typedef struct sqlite3 sqlite3; - -/* -** CAPI3REF: 64-Bit Integer Types -** KEYWORDS: sqlite_int64 sqlite_uint64 -** -** Because there is no cross-platform way to specify 64-bit integer types -** SQLite includes typedefs for 64-bit signed and unsigned integers. -** -** The sqlite3_int64 and sqlite3_uint64 are the preferred type definitions. -** The sqlite_int64 and sqlite_uint64 types are supported for backwards -** compatibility only. -** -** ^The sqlite3_int64 and sqlite_int64 types can store integer values -** between -9223372036854775808 and +9223372036854775807 inclusive. ^The -** sqlite3_uint64 and sqlite_uint64 types can store integer values -** between 0 and +18446744073709551615 inclusive. -*/ -#ifdef SQLITE_INT64_TYPE - typedef SQLITE_INT64_TYPE sqlite_int64; - typedef unsigned SQLITE_INT64_TYPE sqlite_uint64; -#elif defined(_MSC_VER) || defined(__BORLANDC__) - typedef __int64 sqlite_int64; - typedef unsigned __int64 sqlite_uint64; -#else - typedef long long int sqlite_int64; - typedef unsigned long long int sqlite_uint64; -#endif -typedef sqlite_int64 sqlite3_int64; -typedef sqlite_uint64 sqlite3_uint64; - -/* -** If compiling for a processor that lacks floating point support, -** substitute integer for floating-point. -*/ -#ifdef SQLITE_OMIT_FLOATING_POINT -# define double sqlite3_int64 -#endif - -/* -** CAPI3REF: Closing A Database Connection -** -** ^The sqlite3_close() routine is the destructor for the [sqlite3] object. -** ^Calls to sqlite3_close() return SQLITE_OK if the [sqlite3] object is -** successfullly destroyed and all associated resources are deallocated. -** -** Applications must [sqlite3_finalize | finalize] all [prepared statements] -** and [sqlite3_blob_close | close] all [BLOB handles] associated with -** the [sqlite3] object prior to attempting to close the object. ^If -** sqlite3_close() is called on a [database connection] that still has -** outstanding [prepared statements] or [BLOB handles], then it returns -** SQLITE_BUSY. -** -** ^If [sqlite3_close()] is invoked while a transaction is open, -** the transaction is automatically rolled back. -** -** The C parameter to [sqlite3_close(C)] must be either a NULL -** pointer or an [sqlite3] object pointer obtained -** from [sqlite3_open()], [sqlite3_open16()], or -** [sqlite3_open_v2()], and not previously closed. -** ^Calling sqlite3_close() with a NULL pointer argument is a -** harmless no-op. -*/ -SQLITE_API int sqlite3_close(sqlite3 *); - -/* -** The type for a callback function. -** This is legacy and deprecated. It is included for historical -** compatibility and is not documented. -*/ -typedef int (*sqlite3_callback)(void*,int,char**, char**); - -/* -** CAPI3REF: One-Step Query Execution Interface -** -** The sqlite3_exec() interface is a convenience wrapper around -** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()], -** that allows an application to run multiple statements of SQL -** without having to use a lot of C code. -** -** ^The sqlite3_exec() interface runs zero or more UTF-8 encoded, -** semicolon-separate SQL statements passed into its 2nd argument, -** in the context of the [database connection] passed in as its 1st -** argument. ^If the callback function of the 3rd argument to -** sqlite3_exec() is not NULL, then it is invoked for each result row -** coming out of the evaluated SQL statements. ^The 4th argument to -** to sqlite3_exec() is relayed through to the 1st argument of each -** callback invocation. ^If the callback pointer to sqlite3_exec() -** is NULL, then no callback is ever invoked and result rows are -** ignored. -** -** ^If an error occurs while evaluating the SQL statements passed into -** sqlite3_exec(), then execution of the current statement stops and -** subsequent statements are skipped. ^If the 5th parameter to sqlite3_exec() -** is not NULL then any error message is written into memory obtained -** from [sqlite3_malloc()] and passed back through the 5th parameter. -** To avoid memory leaks, the application should invoke [sqlite3_free()] -** on error message strings returned through the 5th parameter of -** of sqlite3_exec() after the error message string is no longer needed. -** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors -** occur, then sqlite3_exec() sets the pointer in its 5th parameter to -** NULL before returning. -** -** ^If an sqlite3_exec() callback returns non-zero, the sqlite3_exec() -** routine returns SQLITE_ABORT without invoking the callback again and -** without running any subsequent SQL statements. -** -** ^The 2nd argument to the sqlite3_exec() callback function is the -** number of columns in the result. ^The 3rd argument to the sqlite3_exec() -** callback is an array of pointers to strings obtained as if from -** [sqlite3_column_text()], one for each column. ^If an element of a -** result row is NULL then the corresponding string pointer for the -** sqlite3_exec() callback is a NULL pointer. ^The 4th argument to the -** sqlite3_exec() callback is an array of pointers to strings where each -** entry represents the name of corresponding result column as obtained -** from [sqlite3_column_name()]. -** -** ^If the 2nd parameter to sqlite3_exec() is a NULL pointer, a pointer -** to an empty string, or a pointer that contains only whitespace and/or -** SQL comments, then no SQL statements are evaluated and the database -** is not changed. -** -** Restrictions: -** -** -*/ -SQLITE_API int sqlite3_exec( - sqlite3*, /* An open database */ - const char *sql, /* SQL to be evaluated */ - int (*callback)(void*,int,char**,char**), /* Callback function */ - void *, /* 1st argument to callback */ - char **errmsg /* Error msg written here */ -); - -/* -** CAPI3REF: Result Codes -** KEYWORDS: SQLITE_OK {error code} {error codes} -** KEYWORDS: {result code} {result codes} -** -** Many SQLite functions return an integer result code from the set shown -** here in order to indicates success or failure. -** -** New error codes may be added in future versions of SQLite. -** -** See also: [SQLITE_IOERR_READ | extended result codes] -*/ -#define SQLITE_OK 0 /* Successful result */ -/* beginning-of-error-codes */ -#define SQLITE_ERROR 1 /* SQL error or missing database */ -#define SQLITE_INTERNAL 2 /* Internal logic error in SQLite */ -#define SQLITE_PERM 3 /* Access permission denied */ -#define SQLITE_ABORT 4 /* Callback routine requested an abort */ -#define SQLITE_BUSY 5 /* The database file is locked */ -#define SQLITE_LOCKED 6 /* A table in the database is locked */ -#define SQLITE_NOMEM 7 /* A malloc() failed */ -#define SQLITE_READONLY 8 /* Attempt to write a readonly database */ -#define SQLITE_INTERRUPT 9 /* Operation terminated by sqlite3_interrupt()*/ -#define SQLITE_IOERR 10 /* Some kind of disk I/O error occurred */ -#define SQLITE_CORRUPT 11 /* The database disk image is malformed */ -#define SQLITE_NOTFOUND 12 /* NOT USED. Table or record not found */ -#define SQLITE_FULL 13 /* Insertion failed because database is full */ -#define SQLITE_CANTOPEN 14 /* Unable to open the database file */ -#define SQLITE_PROTOCOL 15 /* NOT USED. Database lock protocol error */ -#define SQLITE_EMPTY 16 /* Database is empty */ -#define SQLITE_SCHEMA 17 /* The database schema changed */ -#define SQLITE_TOOBIG 18 /* String or BLOB exceeds size limit */ -#define SQLITE_CONSTRAINT 19 /* Abort due to constraint violation */ -#define SQLITE_MISMATCH 20 /* Data type mismatch */ -#define SQLITE_MISUSE 21 /* Library used incorrectly */ -#define SQLITE_NOLFS 22 /* Uses OS features not supported on host */ -#define SQLITE_AUTH 23 /* Authorization denied */ -#define SQLITE_FORMAT 24 /* Auxiliary database format error */ -#define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */ -#define SQLITE_NOTADB 26 /* File opened that is not a database file */ -#define SQLITE_ROW 100 /* sqlite3_step() has another row ready */ -#define SQLITE_DONE 101 /* sqlite3_step() has finished executing */ -/* end-of-error-codes */ - -/* -** CAPI3REF: Extended Result Codes -** KEYWORDS: {extended error code} {extended error codes} -** KEYWORDS: {extended result code} {extended result codes} -** -** In its default configuration, SQLite API routines return one of 26 integer -** [SQLITE_OK | result codes]. However, experience has shown that many of -** these result codes are too coarse-grained. They do not provide as -** much information about problems as programmers might like. In an effort to -** address this, newer versions of SQLite (version 3.3.8 and later) include -** support for additional result codes that provide more detailed information -** about errors. The extended result codes are enabled or disabled -** on a per database connection basis using the -** [sqlite3_extended_result_codes()] API. -** -** Some of the available extended result codes are listed here. -** One may expect the number of extended result codes will be expand -** over time. Software that uses extended result codes should expect -** to see new result codes in future releases of SQLite. -** -** The SQLITE_OK result code will never be extended. It will always -** be exactly zero. -*/ -#define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8)) -#define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8)) -#define SQLITE_IOERR_WRITE (SQLITE_IOERR | (3<<8)) -#define SQLITE_IOERR_FSYNC (SQLITE_IOERR | (4<<8)) -#define SQLITE_IOERR_DIR_FSYNC (SQLITE_IOERR | (5<<8)) -#define SQLITE_IOERR_TRUNCATE (SQLITE_IOERR | (6<<8)) -#define SQLITE_IOERR_FSTAT (SQLITE_IOERR | (7<<8)) -#define SQLITE_IOERR_UNLOCK (SQLITE_IOERR | (8<<8)) -#define SQLITE_IOERR_RDLOCK (SQLITE_IOERR | (9<<8)) -#define SQLITE_IOERR_DELETE (SQLITE_IOERR | (10<<8)) -#define SQLITE_IOERR_BLOCKED (SQLITE_IOERR | (11<<8)) -#define SQLITE_IOERR_NOMEM (SQLITE_IOERR | (12<<8)) -#define SQLITE_IOERR_ACCESS (SQLITE_IOERR | (13<<8)) -#define SQLITE_IOERR_CHECKRESERVEDLOCK (SQLITE_IOERR | (14<<8)) -#define SQLITE_IOERR_LOCK (SQLITE_IOERR | (15<<8)) -#define SQLITE_IOERR_CLOSE (SQLITE_IOERR | (16<<8)) -#define SQLITE_IOERR_DIR_CLOSE (SQLITE_IOERR | (17<<8)) -#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8) ) - -/* -** CAPI3REF: Flags For File Open Operations -** -** These bit values are intended for use in the -** 3rd parameter to the [sqlite3_open_v2()] interface and -** in the 4th parameter to the xOpen method of the -** [sqlite3_vfs] object. -*/ -#define SQLITE_OPEN_READONLY 0x00000001 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_READWRITE 0x00000002 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_CREATE 0x00000004 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_DELETEONCLOSE 0x00000008 /* VFS only */ -#define SQLITE_OPEN_EXCLUSIVE 0x00000010 /* VFS only */ -#define SQLITE_OPEN_AUTOPROXY 0x00000020 /* VFS only */ -#define SQLITE_OPEN_MAIN_DB 0x00000100 /* VFS only */ -#define SQLITE_OPEN_TEMP_DB 0x00000200 /* VFS only */ -#define SQLITE_OPEN_TRANSIENT_DB 0x00000400 /* VFS only */ -#define SQLITE_OPEN_MAIN_JOURNAL 0x00000800 /* VFS only */ -#define SQLITE_OPEN_TEMP_JOURNAL 0x00001000 /* VFS only */ -#define SQLITE_OPEN_SUBJOURNAL 0x00002000 /* VFS only */ -#define SQLITE_OPEN_MASTER_JOURNAL 0x00004000 /* VFS only */ -#define SQLITE_OPEN_NOMUTEX 0x00008000 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_FULLMUTEX 0x00010000 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_SHAREDCACHE 0x00020000 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_PRIVATECACHE 0x00040000 /* Ok for sqlite3_open_v2() */ - -/* -** CAPI3REF: Device Characteristics -** -** The xDeviceCapabilities method of the [sqlite3_io_methods] -** object returns an integer which is a vector of the these -** bit values expressing I/O characteristics of the mass storage -** device that holds the file that the [sqlite3_io_methods] -** refers to. -** -** The SQLITE_IOCAP_ATOMIC property means that all writes of -** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values -** mean that writes of blocks that are nnn bytes in size and -** are aligned to an address which is an integer multiple of -** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means -** that when data is appended to a file, the data is appended -** first then the size of the file is extended, never the other -** way around. The SQLITE_IOCAP_SEQUENTIAL property means that -** information is written to disk in the same order as calls -** to xWrite(). -*/ -#define SQLITE_IOCAP_ATOMIC 0x00000001 -#define SQLITE_IOCAP_ATOMIC512 0x00000002 -#define SQLITE_IOCAP_ATOMIC1K 0x00000004 -#define SQLITE_IOCAP_ATOMIC2K 0x00000008 -#define SQLITE_IOCAP_ATOMIC4K 0x00000010 -#define SQLITE_IOCAP_ATOMIC8K 0x00000020 -#define SQLITE_IOCAP_ATOMIC16K 0x00000040 -#define SQLITE_IOCAP_ATOMIC32K 0x00000080 -#define SQLITE_IOCAP_ATOMIC64K 0x00000100 -#define SQLITE_IOCAP_SAFE_APPEND 0x00000200 -#define SQLITE_IOCAP_SEQUENTIAL 0x00000400 - -/* -** CAPI3REF: File Locking Levels -** -** SQLite uses one of these integer values as the second -** argument to calls it makes to the xLock() and xUnlock() methods -** of an [sqlite3_io_methods] object. -*/ -#define SQLITE_LOCK_NONE 0 -#define SQLITE_LOCK_SHARED 1 -#define SQLITE_LOCK_RESERVED 2 -#define SQLITE_LOCK_PENDING 3 -#define SQLITE_LOCK_EXCLUSIVE 4 - -/* -** CAPI3REF: Synchronization Type Flags -** -** When SQLite invokes the xSync() method of an -** [sqlite3_io_methods] object it uses a combination of -** these integer values as the second argument. -** -** When the SQLITE_SYNC_DATAONLY flag is used, it means that the -** sync operation only needs to flush data to mass storage. Inode -** information need not be flushed. If the lower four bits of the flag -** equal SQLITE_SYNC_NORMAL, that means to use normal fsync() semantics. -** If the lower four bits equal SQLITE_SYNC_FULL, that means -** to use Mac OS X style fullsync instead of fsync(). -*/ -#define SQLITE_SYNC_NORMAL 0x00002 -#define SQLITE_SYNC_FULL 0x00003 -#define SQLITE_SYNC_DATAONLY 0x00010 - -/* -** CAPI3REF: OS Interface Open File Handle -** -** An [sqlite3_file] object represents an open file in the -** [sqlite3_vfs | OS interface layer]. Individual OS interface -** implementations will -** want to subclass this object by appending additional fields -** for their own use. The pMethods entry is a pointer to an -** [sqlite3_io_methods] object that defines methods for performing -** I/O operations on the open file. -*/ -typedef struct sqlite3_file sqlite3_file; -struct sqlite3_file { - const struct sqlite3_io_methods *pMethods; /* Methods for an open file */ -}; - -/* -** CAPI3REF: OS Interface File Virtual Methods Object -** -** Every file opened by the [sqlite3_vfs] xOpen method populates an -** [sqlite3_file] object (or, more commonly, a subclass of the -** [sqlite3_file] object) with a pointer to an instance of this object. -** This object defines the methods used to perform various operations -** against the open file represented by the [sqlite3_file] object. -** -** If the xOpen method sets the sqlite3_file.pMethods element -** to a non-NULL pointer, then the sqlite3_io_methods.xClose method -** may be invoked even if the xOpen reported that it failed. The -** only way to prevent a call to xClose following a failed xOpen -** is for the xOpen to set the sqlite3_file.pMethods element to NULL. -** -** The flags argument to xSync may be one of [SQLITE_SYNC_NORMAL] or -** [SQLITE_SYNC_FULL]. The first choice is the normal fsync(). -** The second choice is a Mac OS X style fullsync. The [SQLITE_SYNC_DATAONLY] -** flag may be ORed in to indicate that only the data of the file -** and not its inode needs to be synced. -** -** The integer values to xLock() and xUnlock() are one of -** -** xLock() increases the lock. xUnlock() decreases the lock. -** The xCheckReservedLock() method checks whether any database connection, -** either in this process or in some other process, is holding a RESERVED, -** PENDING, or EXCLUSIVE lock on the file. It returns true -** if such a lock exists and false otherwise. -** -** The xFileControl() method is a generic interface that allows custom -** VFS implementations to directly control an open file using the -** [sqlite3_file_control()] interface. The second "op" argument is an -** integer opcode. The third argument is a generic pointer intended to -** point to a structure that may contain arguments or space in which to -** write return values. Potential uses for xFileControl() might be -** functions to enable blocking locks with timeouts, to change the -** locking strategy (for example to use dot-file locks), to inquire -** about the status of a lock, or to break stale locks. The SQLite -** core reserves all opcodes less than 100 for its own use. -** A [SQLITE_FCNTL_LOCKSTATE | list of opcodes] less than 100 is available. -** Applications that define a custom xFileControl method should use opcodes -** greater than 100 to avoid conflicts. -** -** The xSectorSize() method returns the sector size of the -** device that underlies the file. The sector size is the -** minimum write that can be performed without disturbing -** other bytes in the file. The xDeviceCharacteristics() -** method returns a bit vector describing behaviors of the -** underlying device: -** -** -** -** The SQLITE_IOCAP_ATOMIC property means that all writes of -** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values -** mean that writes of blocks that are nnn bytes in size and -** are aligned to an address which is an integer multiple of -** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means -** that when data is appended to a file, the data is appended -** first then the size of the file is extended, never the other -** way around. The SQLITE_IOCAP_SEQUENTIAL property means that -** information is written to disk in the same order as calls -** to xWrite(). -** -** If xRead() returns SQLITE_IOERR_SHORT_READ it must also fill -** in the unread portions of the buffer with zeros. A VFS that -** fails to zero-fill short reads might seem to work. However, -** failure to zero-fill short reads will eventually lead to -** database corruption. -*/ -typedef struct sqlite3_io_methods sqlite3_io_methods; -struct sqlite3_io_methods { - int iVersion; - int (*xClose)(sqlite3_file*); - int (*xRead)(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst); - int (*xWrite)(sqlite3_file*, const void*, int iAmt, sqlite3_int64 iOfst); - int (*xTruncate)(sqlite3_file*, sqlite3_int64 size); - int (*xSync)(sqlite3_file*, int flags); - int (*xFileSize)(sqlite3_file*, sqlite3_int64 *pSize); - int (*xLock)(sqlite3_file*, int); - int (*xUnlock)(sqlite3_file*, int); - int (*xCheckReservedLock)(sqlite3_file*, int *pResOut); - int (*xFileControl)(sqlite3_file*, int op, void *pArg); - int (*xSectorSize)(sqlite3_file*); - int (*xDeviceCharacteristics)(sqlite3_file*); - /* Additional methods may be added in future releases */ -}; - -/* -** CAPI3REF: Standard File Control Opcodes -** -** These integer constants are opcodes for the xFileControl method -** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()] -** interface. -** -** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging. This -** opcode causes the xFileControl method to write the current state of -** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED], -** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE]) -** into an integer that the pArg argument points to. This capability -** is used during testing and only needs to be supported when SQLITE_TEST -** is defined. -*/ -#define SQLITE_FCNTL_LOCKSTATE 1 -#define SQLITE_GET_LOCKPROXYFILE 2 -#define SQLITE_SET_LOCKPROXYFILE 3 -#define SQLITE_LAST_ERRNO 4 - -/* -** CAPI3REF: Mutex Handle -** -** The mutex module within SQLite defines [sqlite3_mutex] to be an -** abstract type for a mutex object. The SQLite core never looks -** at the internal representation of an [sqlite3_mutex]. It only -** deals with pointers to the [sqlite3_mutex] object. -** -** Mutexes are created using [sqlite3_mutex_alloc()]. -*/ -typedef struct sqlite3_mutex sqlite3_mutex; - -/* -** CAPI3REF: OS Interface Object -** -** An instance of the sqlite3_vfs object defines the interface between -** the SQLite core and the underlying operating system. The "vfs" -** in the name of the object stands for "virtual file system". -** -** The value of the iVersion field is initially 1 but may be larger in -** future versions of SQLite. Additional fields may be appended to this -** object when the iVersion value is increased. Note that the structure -** of the sqlite3_vfs object changes in the transaction between -** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not -** modified. -** -** The szOsFile field is the size of the subclassed [sqlite3_file] -** structure used by this VFS. mxPathname is the maximum length of -** a pathname in this VFS. -** -** Registered sqlite3_vfs objects are kept on a linked list formed by -** the pNext pointer. The [sqlite3_vfs_register()] -** and [sqlite3_vfs_unregister()] interfaces manage this list -** in a thread-safe way. The [sqlite3_vfs_find()] interface -** searches the list. Neither the application code nor the VFS -** implementation should use the pNext pointer. -** -** The pNext field is the only field in the sqlite3_vfs -** structure that SQLite will ever modify. SQLite will only access -** or modify this field while holding a particular static mutex. -** The application should never modify anything within the sqlite3_vfs -** object once the object has been registered. -** -** The zName field holds the name of the VFS module. The name must -** be unique across all VFS modules. -** -** SQLite will guarantee that the zFilename parameter to xOpen -** is either a NULL pointer or string obtained -** from xFullPathname(). SQLite further guarantees that -** the string will be valid and unchanged until xClose() is -** called. Because of the previous sentence, -** the [sqlite3_file] can safely store a pointer to the -** filename if it needs to remember the filename for some reason. -** If the zFilename parameter is xOpen is a NULL pointer then xOpen -** must invent its own temporary name for the file. Whenever the -** xFilename parameter is NULL it will also be the case that the -** flags parameter will include [SQLITE_OPEN_DELETEONCLOSE]. -** -** The flags argument to xOpen() includes all bits set in -** the flags argument to [sqlite3_open_v2()]. Or if [sqlite3_open()] -** or [sqlite3_open16()] is used, then flags includes at least -** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]. -** If xOpen() opens a file read-only then it sets *pOutFlags to -** include [SQLITE_OPEN_READONLY]. Other bits in *pOutFlags may be set. -** -** SQLite will also add one of the following flags to the xOpen() -** call, depending on the object being opened: -** -** -** -** The file I/O implementation can use the object type flags to -** change the way it deals with files. For example, an application -** that does not care about crash recovery or rollback might make -** the open of a journal file a no-op. Writes to this journal would -** also be no-ops, and any attempt to read the journal would return -** SQLITE_IOERR. Or the implementation might recognize that a database -** file will be doing page-aligned sector reads and writes in a random -** order and set up its I/O subsystem accordingly. -** -** SQLite might also add one of the following flags to the xOpen method: -** -** -** -** The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be -** deleted when it is closed. The [SQLITE_OPEN_DELETEONCLOSE] -** will be set for TEMP databases, journals and for subjournals. -** -** The [SQLITE_OPEN_EXCLUSIVE] flag is always used in conjunction -** with the [SQLITE_OPEN_CREATE] flag, which are both directly -** analogous to the O_EXCL and O_CREAT flags of the POSIX open() -** API. The SQLITE_OPEN_EXCLUSIVE flag, when paired with the -** SQLITE_OPEN_CREATE, is used to indicate that file should always -** be created, and that it is an error if it already exists. -** It is not used to indicate the file should be opened -** for exclusive access. -** -** At least szOsFile bytes of memory are allocated by SQLite -** to hold the [sqlite3_file] structure passed as the third -** argument to xOpen. The xOpen method does not have to -** allocate the structure; it should just fill it in. Note that -** the xOpen method must set the sqlite3_file.pMethods to either -** a valid [sqlite3_io_methods] object or to NULL. xOpen must do -** this even if the open fails. SQLite expects that the sqlite3_file.pMethods -** element will be valid after xOpen returns regardless of the success -** or failure of the xOpen call. -** -** The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS] -** to test for the existence of a file, or [SQLITE_ACCESS_READWRITE] to -** test whether a file is readable and writable, or [SQLITE_ACCESS_READ] -** to test whether a file is at least readable. The file can be a -** directory. -** -** SQLite will always allocate at least mxPathname+1 bytes for the -** output buffer xFullPathname. The exact size of the output buffer -** is also passed as a parameter to both methods. If the output buffer -** is not large enough, [SQLITE_CANTOPEN] should be returned. Since this is -** handled as a fatal error by SQLite, vfs implementations should endeavor -** to prevent this by setting mxPathname to a sufficiently large value. -** -** The xRandomness(), xSleep(), and xCurrentTime() interfaces -** are not strictly a part of the filesystem, but they are -** included in the VFS structure for completeness. -** The xRandomness() function attempts to return nBytes bytes -** of good-quality randomness into zOut. The return value is -** the actual number of bytes of randomness obtained. -** The xSleep() method causes the calling thread to sleep for at -** least the number of microseconds given. The xCurrentTime() -** method returns a Julian Day Number for the current date and time. -** -*/ -typedef struct sqlite3_vfs sqlite3_vfs; -struct sqlite3_vfs { - int iVersion; /* Structure version number */ - int szOsFile; /* Size of subclassed sqlite3_file */ - int mxPathname; /* Maximum file pathname length */ - sqlite3_vfs *pNext; /* Next registered VFS */ - const char *zName; /* Name of this virtual file system */ - void *pAppData; /* Pointer to application-specific data */ - int (*xOpen)(sqlite3_vfs*, const char *zName, sqlite3_file*, - int flags, int *pOutFlags); - int (*xDelete)(sqlite3_vfs*, const char *zName, int syncDir); - int (*xAccess)(sqlite3_vfs*, const char *zName, int flags, int *pResOut); - int (*xFullPathname)(sqlite3_vfs*, const char *zName, int nOut, char *zOut); - void *(*xDlOpen)(sqlite3_vfs*, const char *zFilename); - void (*xDlError)(sqlite3_vfs*, int nByte, char *zErrMsg); - void (*(*xDlSym)(sqlite3_vfs*,void*, const char *zSymbol))(void); - void (*xDlClose)(sqlite3_vfs*, void*); - int (*xRandomness)(sqlite3_vfs*, int nByte, char *zOut); - int (*xSleep)(sqlite3_vfs*, int microseconds); - int (*xCurrentTime)(sqlite3_vfs*, double*); - int (*xGetLastError)(sqlite3_vfs*, int, char *); - /* New fields may be appended in figure versions. The iVersion - ** value will increment whenever this happens. */ -}; - -/* -** CAPI3REF: Flags for the xAccess VFS method -** -** These integer constants can be used as the third parameter to -** the xAccess method of an [sqlite3_vfs] object. They determine -** what kind of permissions the xAccess method is looking for. -** With SQLITE_ACCESS_EXISTS, the xAccess method -** simply checks whether the file exists. -** With SQLITE_ACCESS_READWRITE, the xAccess method -** checks whether the file is both readable and writable. -** With SQLITE_ACCESS_READ, the xAccess method -** checks whether the file is readable. -*/ -#define SQLITE_ACCESS_EXISTS 0 -#define SQLITE_ACCESS_READWRITE 1 -#define SQLITE_ACCESS_READ 2 - -/* -** CAPI3REF: Initialize The SQLite Library -** -** ^The sqlite3_initialize() routine initializes the -** SQLite library. ^The sqlite3_shutdown() routine -** deallocates any resources that were allocated by sqlite3_initialize(). -** These routines are designed to aid in process initialization and -** shutdown on embedded systems. Workstation applications using -** SQLite normally do not need to invoke either of these routines. -** -** A call to sqlite3_initialize() is an "effective" call if it is -** the first time sqlite3_initialize() is invoked during the lifetime of -** the process, or if it is the first time sqlite3_initialize() is invoked -** following a call to sqlite3_shutdown(). ^(Only an effective call -** of sqlite3_initialize() does any initialization. All other calls -** are harmless no-ops.)^ -** -** A call to sqlite3_shutdown() is an "effective" call if it is the first -** call to sqlite3_shutdown() since the last sqlite3_initialize(). ^(Only -** an effective call to sqlite3_shutdown() does any deinitialization. -** All other valid calls to sqlite3_shutdown() are harmless no-ops.)^ -** -** The sqlite3_initialize() interface is threadsafe, but sqlite3_shutdown() -** is not. The sqlite3_shutdown() interface must only be called from a -** single thread. All open [database connections] must be closed and all -** other SQLite resources must be deallocated prior to invoking -** sqlite3_shutdown(). -** -** Among other things, ^sqlite3_initialize() will invoke -** sqlite3_os_init(). Similarly, ^sqlite3_shutdown() -** will invoke sqlite3_os_end(). -** -** ^The sqlite3_initialize() routine returns [SQLITE_OK] on success. -** ^If for some reason, sqlite3_initialize() is unable to initialize -** the library (perhaps it is unable to allocate a needed resource such -** as a mutex) it returns an [error code] other than [SQLITE_OK]. -** -** ^The sqlite3_initialize() routine is called internally by many other -** SQLite interfaces so that an application usually does not need to -** invoke sqlite3_initialize() directly. For example, [sqlite3_open()] -** calls sqlite3_initialize() so the SQLite library will be automatically -** initialized when [sqlite3_open()] is called if it has not be initialized -** already. ^However, if SQLite is compiled with the [SQLITE_OMIT_AUTOINIT] -** compile-time option, then the automatic calls to sqlite3_initialize() -** are omitted and the application must call sqlite3_initialize() directly -** prior to using any other SQLite interface. For maximum portability, -** it is recommended that applications always invoke sqlite3_initialize() -** directly prior to using any other SQLite interface. Future releases -** of SQLite may require this. In other words, the behavior exhibited -** when SQLite is compiled with [SQLITE_OMIT_AUTOINIT] might become the -** default behavior in some future release of SQLite. -** -** The sqlite3_os_init() routine does operating-system specific -** initialization of the SQLite library. The sqlite3_os_end() -** routine undoes the effect of sqlite3_os_init(). Typical tasks -** performed by these routines include allocation or deallocation -** of static resources, initialization of global variables, -** setting up a default [sqlite3_vfs] module, or setting up -** a default configuration using [sqlite3_config()]. -** -** The application should never invoke either sqlite3_os_init() -** or sqlite3_os_end() directly. The application should only invoke -** sqlite3_initialize() and sqlite3_shutdown(). The sqlite3_os_init() -** interface is called automatically by sqlite3_initialize() and -** sqlite3_os_end() is called by sqlite3_shutdown(). Appropriate -** implementations for sqlite3_os_init() and sqlite3_os_end() -** are built into SQLite when it is compiled for Unix, Windows, or OS/2. -** When [custom builds | built for other platforms] -** (using the [SQLITE_OS_OTHER=1] compile-time -** option) the application must supply a suitable implementation for -** sqlite3_os_init() and sqlite3_os_end(). An application-supplied -** implementation of sqlite3_os_init() or sqlite3_os_end() -** must return [SQLITE_OK] on success and some other [error code] upon -** failure. -*/ -SQLITE_API int sqlite3_initialize(void); -SQLITE_API int sqlite3_shutdown(void); -SQLITE_API int sqlite3_os_init(void); -SQLITE_API int sqlite3_os_end(void); - -/* -** CAPI3REF: Configuring The SQLite Library -** -** The sqlite3_config() interface is used to make global configuration -** changes to SQLite in order to tune SQLite to the specific needs of -** the application. The default configuration is recommended for most -** applications and so this routine is usually not necessary. It is -** provided to support rare applications with unusual needs. -** -** The sqlite3_config() interface is not threadsafe. The application -** must insure that no other SQLite interfaces are invoked by other -** threads while sqlite3_config() is running. Furthermore, sqlite3_config() -** may only be invoked prior to library initialization using -** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()]. -** ^If sqlite3_config() is called after [sqlite3_initialize()] and before -** [sqlite3_shutdown()] then it will return SQLITE_MISUSE. -** Note, however, that ^sqlite3_config() can be called as part of the -** implementation of an application-defined [sqlite3_os_init()]. -** -** The first argument to sqlite3_config() is an integer -** [SQLITE_CONFIG_SINGLETHREAD | configuration option] that determines -** what property of SQLite is to be configured. Subsequent arguments -** vary depending on the [SQLITE_CONFIG_SINGLETHREAD | configuration option] -** in the first argument. -** -** ^When a configuration option is set, sqlite3_config() returns [SQLITE_OK]. -** ^If the option is unknown or SQLite is unable to set the option -** then this routine returns a non-zero [error code]. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_config(int, ...); - -/* -** CAPI3REF: Configure database connections -** EXPERIMENTAL -** -** The sqlite3_db_config() interface is used to make configuration -** changes to a [database connection]. The interface is similar to -** [sqlite3_config()] except that the changes apply to a single -** [database connection] (specified in the first argument). The -** sqlite3_db_config() interface should only be used immediately after -** the database connection is created using [sqlite3_open()], -** [sqlite3_open16()], or [sqlite3_open_v2()]. -** -** The second argument to sqlite3_db_config(D,V,...) is the -** configuration verb - an integer code that indicates what -** aspect of the [database connection] is being configured. -** The only choice for this value is [SQLITE_DBCONFIG_LOOKASIDE]. -** New verbs are likely to be added in future releases of SQLite. -** Additional arguments depend on the verb. -** -** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if -** the call is considered successful. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_db_config(sqlite3*, int op, ...); - -/* -** CAPI3REF: Memory Allocation Routines -** EXPERIMENTAL -** -** An instance of this object defines the interface between SQLite -** and low-level memory allocation routines. -** -** This object is used in only one place in the SQLite interface. -** A pointer to an instance of this object is the argument to -** [sqlite3_config()] when the configuration option is -** [SQLITE_CONFIG_MALLOC] or [SQLITE_CONFIG_GETMALLOC]. -** By creating an instance of this object -** and passing it to [sqlite3_config]([SQLITE_CONFIG_MALLOC]) -** during configuration, an application can specify an alternative -** memory allocation subsystem for SQLite to use for all of its -** dynamic memory needs. -** -** Note that SQLite comes with several [built-in memory allocators] -** that are perfectly adequate for the overwhelming majority of applications -** and that this object is only useful to a tiny minority of applications -** with specialized memory allocation requirements. This object is -** also used during testing of SQLite in order to specify an alternative -** memory allocator that simulates memory out-of-memory conditions in -** order to verify that SQLite recovers gracefully from such -** conditions. -** -** The xMalloc and xFree methods must work like the -** malloc() and free() functions from the standard C library. -** The xRealloc method must work like realloc() from the standard C library -** with the exception that if the second argument to xRealloc is zero, -** xRealloc must be a no-op - it must not perform any allocation or -** deallocation. ^SQLite guarantees that the second argument to -** xRealloc is always a value returned by a prior call to xRoundup. -** And so in cases where xRoundup always returns a positive number, -** xRealloc can perform exactly as the standard library realloc() and -** still be in compliance with this specification. -** -** xSize should return the allocated size of a memory allocation -** previously obtained from xMalloc or xRealloc. The allocated size -** is always at least as big as the requested size but may be larger. -** -** The xRoundup method returns what would be the allocated size of -** a memory allocation given a particular requested size. Most memory -** allocators round up memory allocations at least to the next multiple -** of 8. Some allocators round up to a larger multiple or to a power of 2. -** Every memory allocation request coming in through [sqlite3_malloc()] -** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0, -** that causes the corresponding memory allocation to fail. -** -** The xInit method initializes the memory allocator. (For example, -** it might allocate any require mutexes or initialize internal data -** structures. The xShutdown method is invoked (indirectly) by -** [sqlite3_shutdown()] and should deallocate any resources acquired -** by xInit. The pAppData pointer is used as the only parameter to -** xInit and xShutdown. -** -** SQLite holds the [SQLITE_MUTEX_STATIC_MASTER] mutex when it invokes -** the xInit method, so the xInit method need not be threadsafe. The -** xShutdown method is only called from [sqlite3_shutdown()] so it does -** not need to be threadsafe either. For all other methods, SQLite -** holds the [SQLITE_MUTEX_STATIC_MEM] mutex as long as the -** [SQLITE_CONFIG_MEMSTATUS] configuration option is turned on (which -** it is by default) and so the methods are automatically serialized. -** However, if [SQLITE_CONFIG_MEMSTATUS] is disabled, then the other -** methods must be threadsafe or else make their own arrangements for -** serialization. -** -** SQLite will never invoke xInit() more than once without an intervening -** call to xShutdown(). -*/ -typedef struct sqlite3_mem_methods sqlite3_mem_methods; -struct sqlite3_mem_methods { - void *(*xMalloc)(int); /* Memory allocation function */ - void (*xFree)(void*); /* Free a prior allocation */ - void *(*xRealloc)(void*,int); /* Resize an allocation */ - int (*xSize)(void*); /* Return the size of an allocation */ - int (*xRoundup)(int); /* Round up request size to allocation size */ - int (*xInit)(void*); /* Initialize the memory allocator */ - void (*xShutdown)(void*); /* Deinitialize the memory allocator */ - void *pAppData; /* Argument to xInit() and xShutdown() */ -}; - -/* -** CAPI3REF: Configuration Options -** EXPERIMENTAL -** -** These constants are the available integer configuration options that -** can be passed as the first argument to the [sqlite3_config()] interface. -** -** New configuration options may be added in future releases of SQLite. -** Existing configuration options might be discontinued. Applications -** should check the return code from [sqlite3_config()] to make sure that -** the call worked. The [sqlite3_config()] interface will return a -** non-zero [error code] if a discontinued or unsupported configuration option -** is invoked. -** -**
-**
SQLITE_CONFIG_SINGLETHREAD
-**
There are no arguments to this option. ^This option sets the -** [threading mode] to Single-thread. In other words, it disables -** all mutexing and puts SQLite into a mode where it can only be used -** by a single thread. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** it is not possible to change the [threading mode] from its default -** value of Single-thread and so [sqlite3_config()] will return -** [SQLITE_ERROR] if called with the SQLITE_CONFIG_SINGLETHREAD -** configuration option.
-** -**
SQLITE_CONFIG_MULTITHREAD
-**
There are no arguments to this option. ^This option sets the -** [threading mode] to Multi-thread. In other words, it disables -** mutexing on [database connection] and [prepared statement] objects. -** The application is responsible for serializing access to -** [database connections] and [prepared statements]. But other mutexes -** are enabled so that SQLite will be safe to use in a multi-threaded -** environment as long as no two threads attempt to use the same -** [database connection] at the same time. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** it is not possible to set the Multi-thread [threading mode] and -** [sqlite3_config()] will return [SQLITE_ERROR] if called with the -** SQLITE_CONFIG_MULTITHREAD configuration option.
-** -**
SQLITE_CONFIG_SERIALIZED
-**
There are no arguments to this option. ^This option sets the -** [threading mode] to Serialized. In other words, this option enables -** all mutexes including the recursive -** mutexes on [database connection] and [prepared statement] objects. -** In this mode (which is the default when SQLite is compiled with -** [SQLITE_THREADSAFE=1]) the SQLite library will itself serialize access -** to [database connections] and [prepared statements] so that the -** application is free to use the same [database connection] or the -** same [prepared statement] in different threads at the same time. -** ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** it is not possible to set the Serialized [threading mode] and -** [sqlite3_config()] will return [SQLITE_ERROR] if called with the -** SQLITE_CONFIG_SERIALIZED configuration option.
-** -**
SQLITE_CONFIG_MALLOC
-**
^(This option takes a single argument which is a pointer to an -** instance of the [sqlite3_mem_methods] structure. The argument specifies -** alternative low-level memory allocation routines to be used in place of -** the memory allocation routines built into SQLite.)^ ^SQLite makes -** its own private copy of the content of the [sqlite3_mem_methods] structure -** before the [sqlite3_config()] call returns.
-** -**
SQLITE_CONFIG_GETMALLOC
-**
^(This option takes a single argument which is a pointer to an -** instance of the [sqlite3_mem_methods] structure. The [sqlite3_mem_methods] -** structure is filled with the currently defined memory allocation routines.)^ -** This option can be used to overload the default memory allocation -** routines with a wrapper that simulations memory allocation failure or -** tracks memory usage, for example.
-** -**
SQLITE_CONFIG_MEMSTATUS
-**
^This option takes single argument of type int, interpreted as a -** boolean, which enables or disables the collection of memory allocation -** statistics. ^(When memory allocation statistics are disabled, the -** following SQLite interfaces become non-operational: -**
    -**
  • [sqlite3_memory_used()] -**
  • [sqlite3_memory_highwater()] -**
  • [sqlite3_soft_heap_limit()] -**
  • [sqlite3_status()] -**
)^ -** ^Memory allocation statistics are enabled by default unless SQLite is -** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory -** allocation statistics are disabled by default. -**
-** -**
SQLITE_CONFIG_SCRATCH
-**
^This option specifies a static memory buffer that SQLite can use for -** scratch memory. There are three arguments: A pointer an 8-byte -** aligned memory buffer from which the scrach allocations will be -** drawn, the size of each scratch allocation (sz), -** and the maximum number of scratch allocations (N). The sz -** argument must be a multiple of 16. The sz parameter should be a few bytes -** larger than the actual scratch space required due to internal overhead. -** The first argument must be a pointer to an 8-byte aligned buffer -** of at least sz*N bytes of memory. -** ^SQLite will use no more than one scratch buffer per thread. So -** N should be set to the expected maximum number of threads. ^SQLite will -** never require a scratch buffer that is more than 6 times the database -** page size. ^If SQLite needs needs additional scratch memory beyond -** what is provided by this configuration option, then -** [sqlite3_malloc()] will be used to obtain the memory needed.
-** -**
SQLITE_CONFIG_PAGECACHE
-**
^This option specifies a static memory buffer that SQLite can use for -** the database page cache with the default page cache implemenation. -** This configuration should not be used if an application-define page -** cache implementation is loaded using the SQLITE_CONFIG_PCACHE option. -** There are three arguments to this option: A pointer to 8-byte aligned -** memory, the size of each page buffer (sz), and the number of pages (N). -** The sz argument should be the size of the largest database page -** (a power of two between 512 and 32768) plus a little extra for each -** page header. ^The page header size is 20 to 40 bytes depending on -** the host architecture. ^It is harmless, apart from the wasted memory, -** to make sz a little too large. The first -** argument should point to an allocation of at least sz*N bytes of memory. -** ^SQLite will use the memory provided by the first argument to satisfy its -** memory needs for the first N pages that it adds to cache. ^If additional -** page cache memory is needed beyond what is provided by this option, then -** SQLite goes to [sqlite3_malloc()] for the additional storage space. -** ^The implementation might use one or more of the N buffers to hold -** memory accounting information. The pointer in the first argument must -** be aligned to an 8-byte boundary or subsequent behavior of SQLite -** will be undefined.
-** -**
SQLITE_CONFIG_HEAP
-**
^This option specifies a static memory buffer that SQLite will use -** for all of its dynamic memory allocation needs beyond those provided -** for by [SQLITE_CONFIG_SCRATCH] and [SQLITE_CONFIG_PAGECACHE]. -** There are three arguments: An 8-byte aligned pointer to the memory, -** the number of bytes in the memory buffer, and the minimum allocation size. -** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts -** to using its default memory allocator (the system malloc() implementation), -** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. ^If the -** memory pointer is not NULL and either [SQLITE_ENABLE_MEMSYS3] or -** [SQLITE_ENABLE_MEMSYS5] are defined, then the alternative memory -** allocator is engaged to handle all of SQLites memory allocation needs. -** The first pointer (the memory pointer) must be aligned to an 8-byte -** boundary or subsequent behavior of SQLite will be undefined.
-** -**
SQLITE_CONFIG_MUTEX
-**
^(This option takes a single argument which is a pointer to an -** instance of the [sqlite3_mutex_methods] structure. The argument specifies -** alternative low-level mutex routines to be used in place -** the mutex routines built into SQLite.)^ ^SQLite makes a copy of the -** content of the [sqlite3_mutex_methods] structure before the call to -** [sqlite3_config()] returns. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** the entire mutexing subsystem is omitted from the build and hence calls to -** [sqlite3_config()] with the SQLITE_CONFIG_MUTEX configuration option will -** return [SQLITE_ERROR].
-** -**
SQLITE_CONFIG_GETMUTEX
-**
^(This option takes a single argument which is a pointer to an -** instance of the [sqlite3_mutex_methods] structure. The -** [sqlite3_mutex_methods] -** structure is filled with the currently defined mutex routines.)^ -** This option can be used to overload the default mutex allocation -** routines with a wrapper used to track mutex usage for performance -** profiling or testing, for example. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** the entire mutexing subsystem is omitted from the build and hence calls to -** [sqlite3_config()] with the SQLITE_CONFIG_GETMUTEX configuration option will -** return [SQLITE_ERROR].
-** -**
SQLITE_CONFIG_LOOKASIDE
-**
^(This option takes two arguments that determine the default -** memory allocation for the lookaside memory allocator on each -** [database connection]. The first argument is the -** size of each lookaside buffer slot and the second is the number of -** slots allocated to each database connection.)^ ^(This option sets the -** default lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE] -** verb to [sqlite3_db_config()] can be used to change the lookaside -** configuration on individual connections.)^
-** -**
SQLITE_CONFIG_PCACHE
-**
^(This option takes a single argument which is a pointer to -** an [sqlite3_pcache_methods] object. This object specifies the interface -** to a custom page cache implementation.)^ ^SQLite makes a copy of the -** object and uses it for page cache memory allocations.
-** -**
SQLITE_CONFIG_GETPCACHE
-**
^(This option takes a single argument which is a pointer to an -** [sqlite3_pcache_methods] object. SQLite copies of the current -** page cache implementation into that object.)^
-** -**
-*/ -#define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */ -#define SQLITE_CONFIG_MULTITHREAD 2 /* nil */ -#define SQLITE_CONFIG_SERIALIZED 3 /* nil */ -#define SQLITE_CONFIG_MALLOC 4 /* sqlite3_mem_methods* */ -#define SQLITE_CONFIG_GETMALLOC 5 /* sqlite3_mem_methods* */ -#define SQLITE_CONFIG_SCRATCH 6 /* void*, int sz, int N */ -#define SQLITE_CONFIG_PAGECACHE 7 /* void*, int sz, int N */ -#define SQLITE_CONFIG_HEAP 8 /* void*, int nByte, int min */ -#define SQLITE_CONFIG_MEMSTATUS 9 /* boolean */ -#define SQLITE_CONFIG_MUTEX 10 /* sqlite3_mutex_methods* */ -#define SQLITE_CONFIG_GETMUTEX 11 /* sqlite3_mutex_methods* */ -/* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */ -#define SQLITE_CONFIG_LOOKASIDE 13 /* int int */ -#define SQLITE_CONFIG_PCACHE 14 /* sqlite3_pcache_methods* */ -#define SQLITE_CONFIG_GETPCACHE 15 /* sqlite3_pcache_methods* */ -#define SQLITE_CONFIG_LOG 16 /* xFunc, void* */ - -/* -** CAPI3REF: Configuration Options -** EXPERIMENTAL -** -** These constants are the available integer configuration options that -** can be passed as the second argument to the [sqlite3_db_config()] interface. -** -** New configuration options may be added in future releases of SQLite. -** Existing configuration options might be discontinued. Applications -** should check the return code from [sqlite3_db_config()] to make sure that -** the call worked. ^The [sqlite3_db_config()] interface will return a -** non-zero [error code] if a discontinued or unsupported configuration option -** is invoked. -** -**
-**
SQLITE_DBCONFIG_LOOKASIDE
-**
^This option takes three additional arguments that determine the -** [lookaside memory allocator] configuration for the [database connection]. -** ^The first argument (the third parameter to [sqlite3_db_config()] is a -** pointer to an memory buffer to use for lookaside memory. -** ^The first argument after the SQLITE_DBCONFIG_LOOKASIDE verb -** may be NULL in which case SQLite will allocate the -** lookaside buffer itself using [sqlite3_malloc()]. ^The second argument is the -** size of each lookaside buffer slot. ^The third argument is the number of -** slots. The size of the buffer in the first argument must be greater than -** or equal to the product of the second and third arguments. The buffer -** must be aligned to an 8-byte boundary. ^If the second argument to -** SQLITE_DBCONFIG_LOOKASIDE is not a multiple of 8, it is internally -** rounded down to the next smaller -** multiple of 8. See also: [SQLITE_CONFIG_LOOKASIDE]
-** -**
-*/ -#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */ - - -/* -** CAPI3REF: Enable Or Disable Extended Result Codes -** -** ^The sqlite3_extended_result_codes() routine enables or disables the -** [extended result codes] feature of SQLite. ^The extended result -** codes are disabled by default for historical compatibility. -*/ -SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff); - -/* -** CAPI3REF: Last Insert Rowid -** -** ^Each entry in an SQLite table has a unique 64-bit signed -** integer key called the [ROWID | "rowid"]. ^The rowid is always available -** as an undeclared column named ROWID, OID, or _ROWID_ as long as those -** names are not also used by explicitly declared columns. ^If -** the table has a column of type [INTEGER PRIMARY KEY] then that column -** is another alias for the rowid. -** -** ^This routine returns the [rowid] of the most recent -** successful [INSERT] into the database from the [database connection] -** in the first argument. ^If no successful [INSERT]s -** have ever occurred on that database connection, zero is returned. -** -** ^(If an [INSERT] occurs within a trigger, then the [rowid] of the inserted -** row is returned by this routine as long as the trigger is running. -** But once the trigger terminates, the value returned by this routine -** reverts to the last value inserted before the trigger fired.)^ -** -** ^An [INSERT] that fails due to a constraint violation is not a -** successful [INSERT] and does not change the value returned by this -** routine. ^Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK, -** and INSERT OR ABORT make no changes to the return value of this -** routine when their insertion fails. ^(When INSERT OR REPLACE -** encounters a constraint violation, it does not fail. The -** INSERT continues to completion after deleting rows that caused -** the constraint problem so INSERT OR REPLACE will always change -** the return value of this interface.)^ -** -** ^For the purposes of this routine, an [INSERT] is considered to -** be successful even if it is subsequently rolled back. -** -** This function is accessible to SQL statements via the -** [last_insert_rowid() SQL function]. -** -** If a separate thread performs a new [INSERT] on the same -** database connection while the [sqlite3_last_insert_rowid()] -** function is running and thus changes the last insert [rowid], -** then the value returned by [sqlite3_last_insert_rowid()] is -** unpredictable and might not equal either the old or the new -** last insert [rowid]. -*/ -SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*); - -/* -** CAPI3REF: Count The Number Of Rows Modified -** -** ^This function returns the number of database rows that were changed -** or inserted or deleted by the most recently completed SQL statement -** on the [database connection] specified by the first parameter. -** ^(Only changes that are directly specified by the [INSERT], [UPDATE], -** or [DELETE] statement are counted. Auxiliary changes caused by -** triggers or [foreign key actions] are not counted.)^ Use the -** [sqlite3_total_changes()] function to find the total number of changes -** including changes caused by triggers and foreign key actions. -** -** ^Changes to a view that are simulated by an [INSTEAD OF trigger] -** are not counted. Only real table changes are counted. -** -** ^(A "row change" is a change to a single row of a single table -** caused by an INSERT, DELETE, or UPDATE statement. Rows that -** are changed as side effects of [REPLACE] constraint resolution, -** rollback, ABORT processing, [DROP TABLE], or by any other -** mechanisms do not count as direct row changes.)^ -** -** A "trigger context" is a scope of execution that begins and -** ends with the script of a [CREATE TRIGGER | trigger]. -** Most SQL statements are -** evaluated outside of any trigger. This is the "top level" -** trigger context. If a trigger fires from the top level, a -** new trigger context is entered for the duration of that one -** trigger. Subtriggers create subcontexts for their duration. -** -** ^Calling [sqlite3_exec()] or [sqlite3_step()] recursively does -** not create a new trigger context. -** -** ^This function returns the number of direct row changes in the -** most recent INSERT, UPDATE, or DELETE statement within the same -** trigger context. -** -** ^Thus, when called from the top level, this function returns the -** number of changes in the most recent INSERT, UPDATE, or DELETE -** that also occurred at the top level. ^(Within the body of a trigger, -** the sqlite3_changes() interface can be called to find the number of -** changes in the most recently completed INSERT, UPDATE, or DELETE -** statement within the body of the same trigger. -** However, the number returned does not include changes -** caused by subtriggers since those have their own context.)^ -** -** See also the [sqlite3_total_changes()] interface, the -** [count_changes pragma], and the [changes() SQL function]. -** -** If a separate thread makes changes on the same database connection -** while [sqlite3_changes()] is running then the value returned -** is unpredictable and not meaningful. -*/ -SQLITE_API int sqlite3_changes(sqlite3*); - -/* -** CAPI3REF: Total Number Of Rows Modified -** -** ^This function returns the number of row changes caused by [INSERT], -** [UPDATE] or [DELETE] statements since the [database connection] was opened. -** ^(The count returned by sqlite3_total_changes() includes all changes -** from all [CREATE TRIGGER | trigger] contexts and changes made by -** [foreign key actions]. However, -** the count does not include changes used to implement [REPLACE] constraints, -** do rollbacks or ABORT processing, or [DROP TABLE] processing. The -** count does not include rows of views that fire an [INSTEAD OF trigger], -** though if the INSTEAD OF trigger makes changes of its own, those changes -** are counted.)^ -** ^The sqlite3_total_changes() function counts the changes as soon as -** the statement that makes them is completed (when the statement handle -** is passed to [sqlite3_reset()] or [sqlite3_finalize()]). -** -** See also the [sqlite3_changes()] interface, the -** [count_changes pragma], and the [total_changes() SQL function]. -** -** If a separate thread makes changes on the same database connection -** while [sqlite3_total_changes()] is running then the value -** returned is unpredictable and not meaningful. -*/ -SQLITE_API int sqlite3_total_changes(sqlite3*); - -/* -** CAPI3REF: Interrupt A Long-Running Query -** -** ^This function causes any pending database operation to abort and -** return at its earliest opportunity. This routine is typically -** called in response to a user action such as pressing "Cancel" -** or Ctrl-C where the user wants a long query operation to halt -** immediately. -** -** ^It is safe to call this routine from a thread different from the -** thread that is currently running the database operation. But it -** is not safe to call this routine with a [database connection] that -** is closed or might close before sqlite3_interrupt() returns. -** -** ^If an SQL operation is very nearly finished at the time when -** sqlite3_interrupt() is called, then it might not have an opportunity -** to be interrupted and might continue to completion. -** -** ^An SQL operation that is interrupted will return [SQLITE_INTERRUPT]. -** ^If the interrupted SQL operation is an INSERT, UPDATE, or DELETE -** that is inside an explicit transaction, then the entire transaction -** will be rolled back automatically. -** -** ^The sqlite3_interrupt(D) call is in effect until all currently running -** SQL statements on [database connection] D complete. ^Any new SQL statements -** that are started after the sqlite3_interrupt() call and before the -** running statements reaches zero are interrupted as if they had been -** running prior to the sqlite3_interrupt() call. ^New SQL statements -** that are started after the running statement count reaches zero are -** not effected by the sqlite3_interrupt(). -** ^A call to sqlite3_interrupt(D) that occurs when there are no running -** SQL statements is a no-op and has no effect on SQL statements -** that are started after the sqlite3_interrupt() call returns. -** -** If the database connection closes while [sqlite3_interrupt()] -** is running then bad things will likely happen. -*/ -SQLITE_API void sqlite3_interrupt(sqlite3*); - -/* -** CAPI3REF: Determine If An SQL Statement Is Complete -** -** These routines are useful during command-line input to determine if the -** currently entered text seems to form a complete SQL statement or -** if additional input is needed before sending the text into -** SQLite for parsing. ^These routines return 1 if the input string -** appears to be a complete SQL statement. ^A statement is judged to be -** complete if it ends with a semicolon token and is not a prefix of a -** well-formed CREATE TRIGGER statement. ^Semicolons that are embedded within -** string literals or quoted identifier names or comments are not -** independent tokens (they are part of the token in which they are -** embedded) and thus do not count as a statement terminator. ^Whitespace -** and comments that follow the final semicolon are ignored. -** -** ^These routines return 0 if the statement is incomplete. ^If a -** memory allocation fails, then SQLITE_NOMEM is returned. -** -** ^These routines do not parse the SQL statements thus -** will not detect syntactically incorrect SQL. -** -** ^(If SQLite has not been initialized using [sqlite3_initialize()] prior -** to invoking sqlite3_complete16() then sqlite3_initialize() is invoked -** automatically by sqlite3_complete16(). If that initialization fails, -** then the return value from sqlite3_complete16() will be non-zero -** regardless of whether or not the input SQL is complete.)^ -** -** The input to [sqlite3_complete()] must be a zero-terminated -** UTF-8 string. -** -** The input to [sqlite3_complete16()] must be a zero-terminated -** UTF-16 string in native byte order. -*/ -SQLITE_API int sqlite3_complete(const char *sql); -SQLITE_API int sqlite3_complete16(const void *sql); - -/* -** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors -** -** ^This routine sets a callback function that might be invoked whenever -** an attempt is made to open a database table that another thread -** or process has locked. -** -** ^If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] -** is returned immediately upon encountering the lock. ^If the busy callback -** is not NULL, then the callback might be invoked with two arguments. -** -** ^The first argument to the busy handler is a copy of the void* pointer which -** is the third argument to sqlite3_busy_handler(). ^The second argument to -** the busy handler callback is the number of times that the busy handler has -** been invoked for this locking event. ^If the -** busy callback returns 0, then no additional attempts are made to -** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned. -** ^If the callback returns non-zero, then another attempt -** is made to open the database for reading and the cycle repeats. -** -** The presence of a busy handler does not guarantee that it will be invoked -** when there is lock contention. ^If SQLite determines that invoking the busy -** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY] -** or [SQLITE_IOERR_BLOCKED] instead of invoking the busy handler. -** Consider a scenario where one process is holding a read lock that -** it is trying to promote to a reserved lock and -** a second process is holding a reserved lock that it is trying -** to promote to an exclusive lock. The first process cannot proceed -** because it is blocked by the second and the second process cannot -** proceed because it is blocked by the first. If both processes -** invoke the busy handlers, neither will make any progress. Therefore, -** SQLite returns [SQLITE_BUSY] for the first process, hoping that this -** will induce the first process to release its read lock and allow -** the second process to proceed. -** -** ^The default busy callback is NULL. -** -** ^The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED] -** when SQLite is in the middle of a large transaction where all the -** changes will not fit into the in-memory cache. SQLite will -** already hold a RESERVED lock on the database file, but it needs -** to promote this lock to EXCLUSIVE so that it can spill cache -** pages into the database file without harm to concurrent -** readers. ^If it is unable to promote the lock, then the in-memory -** cache will be left in an inconsistent state and so the error -** code is promoted from the relatively benign [SQLITE_BUSY] to -** the more severe [SQLITE_IOERR_BLOCKED]. ^This error code promotion -** forces an automatic rollback of the changes. See the -** -** CorruptionFollowingBusyError wiki page for a discussion of why -** this is important. -** -** ^(There can only be a single busy handler defined for each -** [database connection]. Setting a new busy handler clears any -** previously set handler.)^ ^Note that calling [sqlite3_busy_timeout()] -** will also set or clear the busy handler. -** -** The busy callback should not take any actions which modify the -** database connection that invoked the busy handler. Any such actions -** result in undefined behavior. -** -** A busy handler must not close the database connection -** or [prepared statement] that invoked the busy handler. -*/ -SQLITE_API int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*); - -/* -** CAPI3REF: Set A Busy Timeout -** -** ^This routine sets a [sqlite3_busy_handler | busy handler] that sleeps -** for a specified amount of time when a table is locked. ^The handler -** will sleep multiple times until at least "ms" milliseconds of sleeping -** have accumulated. ^After at least "ms" milliseconds of sleeping, -** the handler returns 0 which causes [sqlite3_step()] to return -** [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]. -** -** ^Calling this routine with an argument less than or equal to zero -** turns off all busy handlers. -** -** ^(There can only be a single busy handler for a particular -** [database connection] any any given moment. If another busy handler -** was defined (using [sqlite3_busy_handler()]) prior to calling -** this routine, that other busy handler is cleared.)^ -*/ -SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms); - -/* -** CAPI3REF: Convenience Routines For Running Queries -** -** Definition: A result table is memory data structure created by the -** [sqlite3_get_table()] interface. A result table records the -** complete query results from one or more queries. -** -** The table conceptually has a number of rows and columns. But -** these numbers are not part of the result table itself. These -** numbers are obtained separately. Let N be the number of rows -** and M be the number of columns. -** -** A result table is an array of pointers to zero-terminated UTF-8 strings. -** There are (N+1)*M elements in the array. The first M pointers point -** to zero-terminated strings that contain the names of the columns. -** The remaining entries all point to query results. NULL values result -** in NULL pointers. All other values are in their UTF-8 zero-terminated -** string representation as returned by [sqlite3_column_text()]. -** -** A result table might consist of one or more memory allocations. -** It is not safe to pass a result table directly to [sqlite3_free()]. -** A result table should be deallocated using [sqlite3_free_table()]. -** -** As an example of the result table format, suppose a query result -** is as follows: -** -** 
-**        Name        | Age
-**        -----------------------
-**        Alice       | 43
-**        Bob         | 28
-**        Cindy       | 21
-**
-** -** There are two column (M==2) and three rows (N==3). Thus the -** result table has 8 entries. Suppose the result table is stored -** in an array names azResult. Then azResult holds this content: -** -** 
-**        azResult[0] = "Name";
-**        azResult[1] = "Age";
-**        azResult[2] = "Alice";
-**        azResult[3] = "43";
-**        azResult[4] = "Bob";
-**        azResult[5] = "28";
-**        azResult[6] = "Cindy";
-**        azResult[7] = "21";
-**
-** -** ^The sqlite3_get_table() function evaluates one or more -** semicolon-separated SQL statements in the zero-terminated UTF-8 -** string of its 2nd parameter and returns a result table to the -** pointer given in its 3rd parameter. -** -** After the application has finished with the result from sqlite3_get_table(), -** it should pass the result table pointer to sqlite3_free_table() in order to -** release the memory that was malloced. Because of the way the -** [sqlite3_malloc()] happens within sqlite3_get_table(), the calling -** function must not try to call [sqlite3_free()] directly. Only -** [sqlite3_free_table()] is able to release the memory properly and safely. -** -** ^(The sqlite3_get_table() interface is implemented as a wrapper around -** [sqlite3_exec()]. The sqlite3_get_table() routine does not have access -** to any internal data structures of SQLite. It uses only the public -** interface defined here. As a consequence, errors that occur in the -** wrapper layer outside of the internal [sqlite3_exec()] call are not -** reflected in subsequent calls to [sqlite3_errcode()] or -** [sqlite3_errmsg()].)^ -*/ -SQLITE_API int sqlite3_get_table( - sqlite3 *db, /* An open database */ - const char *zSql, /* SQL to be evaluated */ - char ***pazResult, /* Results of the query */ - int *pnRow, /* Number of result rows written here */ - int *pnColumn, /* Number of result columns written here */ - char **pzErrmsg /* Error msg written here */ -); -SQLITE_API void sqlite3_free_table(char **result); - -/* -** CAPI3REF: Formatted String Printing Functions -** -** These routines are work-alikes of the "printf()" family of functions -** from the standard C library. -** -** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their -** results into memory obtained from [sqlite3_malloc()]. -** The strings returned by these two routines should be -** released by [sqlite3_free()]. ^Both routines return a -** NULL pointer if [sqlite3_malloc()] is unable to allocate enough -** memory to hold the resulting string. -** -** ^(In sqlite3_snprintf() routine is similar to "snprintf()" from -** the standard C library. The result is written into the -** buffer supplied as the second parameter whose size is given by -** the first parameter. Note that the order of the -** first two parameters is reversed from snprintf().)^ This is an -** historical accident that cannot be fixed without breaking -** backwards compatibility. ^(Note also that sqlite3_snprintf() -** returns a pointer to its buffer instead of the number of -** characters actually written into the buffer.)^ We admit that -** the number of characters written would be a more useful return -** value but we cannot change the implementation of sqlite3_snprintf() -** now without breaking compatibility. -** -** ^As long as the buffer size is greater than zero, sqlite3_snprintf() -** guarantees that the buffer is always zero-terminated. ^The first -** parameter "n" is the total size of the buffer, including space for -** the zero terminator. So the longest string that can be completely -** written will be n-1 characters. -** -** These routines all implement some additional formatting -** options that are useful for constructing SQL statements. -** All of the usual printf() formatting options apply. In addition, there -** is are "%q", "%Q", and "%z" options. -** -** ^(The %q option works like %s in that it substitutes a null-terminated -** string from the argument list. But %q also doubles every '\'' character. -** %q is designed for use inside a string literal.)^ By doubling each '\'' -** character it escapes that character and allows it to be inserted into -** the string. -** -** For example, assume the string variable zText contains text as follows: -** -** 
-**  char *zText = "It's a happy day!";
-**
-** -** One can use this text in an SQL statement as follows: -** -** 
-**  char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES('%q')", zText);
-**  sqlite3_exec(db, zSQL, 0, 0, 0);
-**  sqlite3_free(zSQL);
-**
-** -** Because the %q format string is used, the '\'' character in zText -** is escaped and the SQL generated is as follows: -** -** 
-**  INSERT INTO table1 VALUES('It''s a happy day!')
-**
-** -** This is correct. Had we used %s instead of %q, the generated SQL -** would have looked like this: -** -** 
-**  INSERT INTO table1 VALUES('It's a happy day!');
-**
-** -** This second example is an SQL syntax error. As a general rule you should -** always use %q instead of %s when inserting text into a string literal. -** -** ^(The %Q option works like %q except it also adds single quotes around -** the outside of the total string. Additionally, if the parameter in the -** argument list is a NULL pointer, %Q substitutes the text "NULL" (without -** single quotes).)^ So, for example, one could say: -** -** 
-**  char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText);
-**  sqlite3_exec(db, zSQL, 0, 0, 0);
-**  sqlite3_free(zSQL);
-**
-** -** The code above will render a correct SQL statement in the zSQL -** variable even if the zText variable is a NULL pointer. -** -** ^(The "%z" formatting option works like "%s" but with the -** addition that after the string has been read and copied into -** the result, [sqlite3_free()] is called on the input string.)^ -*/ -SQLITE_API char *sqlite3_mprintf(const char*,...); -SQLITE_API char *sqlite3_vmprintf(const char*, va_list); -SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...); - -/* -** CAPI3REF: Memory Allocation Subsystem -** -** The SQLite core uses these three routines for all of its own -** internal memory allocation needs. "Core" in the previous sentence -** does not include operating-system specific VFS implementation. The -** Windows VFS uses native malloc() and free() for some operations. -** -** ^The sqlite3_malloc() routine returns a pointer to a block -** of memory at least N bytes in length, where N is the parameter. -** ^If sqlite3_malloc() is unable to obtain sufficient free -** memory, it returns a NULL pointer. ^If the parameter N to -** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns -** a NULL pointer. -** -** ^Calling sqlite3_free() with a pointer previously returned -** by sqlite3_malloc() or sqlite3_realloc() releases that memory so -** that it might be reused. ^The sqlite3_free() routine is -** a no-op if is called with a NULL pointer. Passing a NULL pointer -** to sqlite3_free() is harmless. After being freed, memory -** should neither be read nor written. Even reading previously freed -** memory might result in a segmentation fault or other severe error. -** Memory corruption, a segmentation fault, or other severe error -** might result if sqlite3_free() is called with a non-NULL pointer that -** was not obtained from sqlite3_malloc() or sqlite3_realloc(). -** -** ^(The sqlite3_realloc() interface attempts to resize a -** prior memory allocation to be at least N bytes, where N is the -** second parameter. The memory allocation to be resized is the first -** parameter.)^ ^ If the first parameter to sqlite3_realloc() -** is a NULL pointer then its behavior is identical to calling -** sqlite3_malloc(N) where N is the second parameter to sqlite3_realloc(). -** ^If the second parameter to sqlite3_realloc() is zero or -** negative then the behavior is exactly the same as calling -** sqlite3_free(P) where P is the first parameter to sqlite3_realloc(). -** ^sqlite3_realloc() returns a pointer to a memory allocation -** of at least N bytes in size or NULL if sufficient memory is unavailable. -** ^If M is the size of the prior allocation, then min(N,M) bytes -** of the prior allocation are copied into the beginning of buffer returned -** by sqlite3_realloc() and the prior allocation is freed. -** ^If sqlite3_realloc() returns NULL, then the prior allocation -** is not freed. -** -** ^The memory returned by sqlite3_malloc() and sqlite3_realloc() -** is always aligned to at least an 8 byte boundary. -** -** In SQLite version 3.5.0 and 3.5.1, it was possible to define -** the SQLITE_OMIT_MEMORY_ALLOCATION which would cause the built-in -** implementation of these routines to be omitted. That capability -** is no longer provided. Only built-in memory allocators can be used. -** -** The Windows OS interface layer calls -** the system malloc() and free() directly when converting -** filenames between the UTF-8 encoding used by SQLite -** and whatever filename encoding is used by the particular Windows -** installation. Memory allocation errors are detected, but -** they are reported back as [SQLITE_CANTOPEN] or -** [SQLITE_IOERR] rather than [SQLITE_NOMEM]. -** -** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()] -** must be either NULL or else pointers obtained from a prior -** invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that have -** not yet been released. -** -** The application must not read or write any part of -** a block of memory after it has been released using -** [sqlite3_free()] or [sqlite3_realloc()]. -*/ -SQLITE_API void *sqlite3_malloc(int); -SQLITE_API void *sqlite3_realloc(void*, int); -SQLITE_API void sqlite3_free(void*); - -/* -** CAPI3REF: Memory Allocator Statistics -** -** SQLite provides these two interfaces for reporting on the status -** of the [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()] -** routines, which form the built-in memory allocation subsystem. -** -** ^The [sqlite3_memory_used()] routine returns the number of bytes -** of memory currently outstanding (malloced but not freed). -** ^The [sqlite3_memory_highwater()] routine returns the maximum -** value of [sqlite3_memory_used()] since the high-water mark -** was last reset. ^The values returned by [sqlite3_memory_used()] and -** [sqlite3_memory_highwater()] include any overhead -** added by SQLite in its implementation of [sqlite3_malloc()], -** but not overhead added by the any underlying system library -** routines that [sqlite3_malloc()] may call. -** -** ^The memory high-water mark is reset to the current value of -** [sqlite3_memory_used()] if and only if the parameter to -** [sqlite3_memory_highwater()] is true. ^The value returned -** by [sqlite3_memory_highwater(1)] is the high-water mark -** prior to the reset. -*/ -SQLITE_API sqlite3_int64 sqlite3_memory_used(void); -SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag); - -/* -** CAPI3REF: Pseudo-Random Number Generator -** -** SQLite contains a high-quality pseudo-random number generator (PRNG) used to -** select random [ROWID | ROWIDs] when inserting new records into a table that -** already uses the largest possible [ROWID]. The PRNG is also used for -** the build-in random() and randomblob() SQL functions. This interface allows -** applications to access the same PRNG for other purposes. -** -** ^A call to this routine stores N bytes of randomness into buffer P. -** -** ^The first time this routine is invoked (either internally or by -** the application) the PRNG is seeded using randomness obtained -** from the xRandomness method of the default [sqlite3_vfs] object. -** ^On all subsequent invocations, the pseudo-randomness is generated -** internally and without recourse to the [sqlite3_vfs] xRandomness -** method. -*/ -SQLITE_API void sqlite3_randomness(int N, void *P); - -/* -** CAPI3REF: Compile-Time Authorization Callbacks -** -** ^This routine registers a authorizer callback with a particular -** [database connection], supplied in the first argument. -** ^The authorizer callback is invoked as SQL statements are being compiled -** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()], -** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()]. ^At various -** points during the compilation process, as logic is being created -** to perform various actions, the authorizer callback is invoked to -** see if those actions are allowed. ^The authorizer callback should -** return [SQLITE_OK] to allow the action, [SQLITE_IGNORE] to disallow the -** specific action but allow the SQL statement to continue to be -** compiled, or [SQLITE_DENY] to cause the entire SQL statement to be -** rejected with an error. ^If the authorizer callback returns -** any value other than [SQLITE_IGNORE], [SQLITE_OK], or [SQLITE_DENY] -** then the [sqlite3_prepare_v2()] or equivalent call that triggered -** the authorizer will fail with an error message. -** -** When the callback returns [SQLITE_OK], that means the operation -** requested is ok. ^When the callback returns [SQLITE_DENY], the -** [sqlite3_prepare_v2()] or equivalent call that triggered the -** authorizer will fail with an error message explaining that -** access is denied. -** -** ^The first parameter to the authorizer callback is a copy of the third -** parameter to the sqlite3_set_authorizer() interface. ^The second parameter -** to the callback is an integer [SQLITE_COPY | action code] that specifies -** the particular action to be authorized. ^The third through sixth parameters -** to the callback are zero-terminated strings that contain additional -** details about the action to be authorized. -** -** ^If the action code is [SQLITE_READ] -** and the callback returns [SQLITE_IGNORE] then the -** [prepared statement] statement is constructed to substitute -** a NULL value in place of the table column that would have -** been read if [SQLITE_OK] had been returned. The [SQLITE_IGNORE] -** return can be used to deny an untrusted user access to individual -** columns of a table. -** ^If the action code is [SQLITE_DELETE] and the callback returns -** [SQLITE_IGNORE] then the [DELETE] operation proceeds but the -** [truncate optimization] is disabled and all rows are deleted individually. -** -** An authorizer is used when [sqlite3_prepare | preparing] -** SQL statements from an untrusted source, to ensure that the SQL statements -** do not try to access data they are not allowed to see, or that they do not -** try to execute malicious statements that damage the database. For -** example, an application may allow a user to enter arbitrary -** SQL queries for evaluation by a database. But the application does -** not want the user to be able to make arbitrary changes to the -** database. An authorizer could then be put in place while the -** user-entered SQL is being [sqlite3_prepare | prepared] that -** disallows everything except [SELECT] statements. -** -** Applications that need to process SQL from untrusted sources -** might also consider lowering resource limits using [sqlite3_limit()] -** and limiting database size using the [max_page_count] [PRAGMA] -** in addition to using an authorizer. -** -** ^(Only a single authorizer can be in place on a database connection -** at a time. Each call to sqlite3_set_authorizer overrides the -** previous call.)^ ^Disable the authorizer by installing a NULL callback. -** The authorizer is disabled by default. -** -** The authorizer callback must not do anything that will modify -** the database connection that invoked the authorizer callback. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -** ^When [sqlite3_prepare_v2()] is used to prepare a statement, the -** statement might be re-prepared during [sqlite3_step()] due to a -** schema change. Hence, the application should ensure that the -** correct authorizer callback remains in place during the [sqlite3_step()]. -** -** ^Note that the authorizer callback is invoked only during -** [sqlite3_prepare()] or its variants. Authorization is not -** performed during statement evaluation in [sqlite3_step()], unless -** as stated in the previous paragraph, sqlite3_step() invokes -** sqlite3_prepare_v2() to reprepare a statement after a schema change. -*/ -SQLITE_API int sqlite3_set_authorizer( - sqlite3*, - int (*xAuth)(void*,int,const char*,const char*,const char*,const char*), - void *pUserData -); - -/* -** CAPI3REF: Authorizer Return Codes -** -** The [sqlite3_set_authorizer | authorizer callback function] must -** return either [SQLITE_OK] or one of these two constants in order -** to signal SQLite whether or not the action is permitted. See the -** [sqlite3_set_authorizer | authorizer documentation] for additional -** information. -*/ -#define SQLITE_DENY 1 /* Abort the SQL statement with an error */ -#define SQLITE_IGNORE 2 /* Don't allow access, but don't generate an error */ - -/* -** CAPI3REF: Authorizer Action Codes -** -** The [sqlite3_set_authorizer()] interface registers a callback function -** that is invoked to authorize certain SQL statement actions. The -** second parameter to the callback is an integer code that specifies -** what action is being authorized. These are the integer action codes that -** the authorizer callback may be passed. -** -** These action code values signify what kind of operation is to be -** authorized. The 3rd and 4th parameters to the authorization -** callback function will be parameters or NULL depending on which of these -** codes is used as the second parameter. ^(The 5th parameter to the -** authorizer callback is the name of the database ("main", "temp", -** etc.) if applicable.)^ ^The 6th parameter to the authorizer callback -** is the name of the inner-most trigger or view that is responsible for -** the access attempt or NULL if this access attempt is directly from -** top-level SQL code. -*/ -/******************************************* 3rd ************ 4th ***********/ -#define SQLITE_CREATE_INDEX 1 /* Index Name Table Name */ -#define SQLITE_CREATE_TABLE 2 /* Table Name NULL */ -#define SQLITE_CREATE_TEMP_INDEX 3 /* Index Name Table Name */ -#define SQLITE_CREATE_TEMP_TABLE 4 /* Table Name NULL */ -#define SQLITE_CREATE_TEMP_TRIGGER 5 /* Trigger Name Table Name */ -#define SQLITE_CREATE_TEMP_VIEW 6 /* View Name NULL */ -#define SQLITE_CREATE_TRIGGER 7 /* Trigger Name Table Name */ -#define SQLITE_CREATE_VIEW 8 /* View Name NULL */ -#define SQLITE_DELETE 9 /* Table Name NULL */ -#define SQLITE_DROP_INDEX 10 /* Index Name Table Name */ -#define SQLITE_DROP_TABLE 11 /* Table Name NULL */ -#define SQLITE_DROP_TEMP_INDEX 12 /* Index Name Table Name */ -#define SQLITE_DROP_TEMP_TABLE 13 /* Table Name NULL */ -#define SQLITE_DROP_TEMP_TRIGGER 14 /* Trigger Name Table Name */ -#define SQLITE_DROP_TEMP_VIEW 15 /* View Name NULL */ -#define SQLITE_DROP_TRIGGER 16 /* Trigger Name Table Name */ -#define SQLITE_DROP_VIEW 17 /* View Name NULL */ -#define SQLITE_INSERT 18 /* Table Name NULL */ -#define SQLITE_PRAGMA 19 /* Pragma Name 1st arg or NULL */ -#define SQLITE_READ 20 /* Table Name Column Name */ -#define SQLITE_SELECT 21 /* NULL NULL */ -#define SQLITE_TRANSACTION 22 /* Operation NULL */ -#define SQLITE_UPDATE 23 /* Table Name Column Name */ -#define SQLITE_ATTACH 24 /* Filename NULL */ -#define SQLITE_DETACH 25 /* Database Name NULL */ -#define SQLITE_ALTER_TABLE 26 /* Database Name Table Name */ -#define SQLITE_REINDEX 27 /* Index Name NULL */ -#define SQLITE_ANALYZE 28 /* Table Name NULL */ -#define SQLITE_CREATE_VTABLE 29 /* Table Name Module Name */ -#define SQLITE_DROP_VTABLE 30 /* Table Name Module Name */ -#define SQLITE_FUNCTION 31 /* NULL Function Name */ -#define SQLITE_SAVEPOINT 32 /* Operation Savepoint Name */ -#define SQLITE_COPY 0 /* No longer used */ - -/* -** CAPI3REF: Tracing And Profiling Functions -** EXPERIMENTAL -** -** These routines register callback functions that can be used for -** tracing and profiling the execution of SQL statements. -** -** ^The callback function registered by sqlite3_trace() is invoked at -** various times when an SQL statement is being run by [sqlite3_step()]. -** ^The sqlite3_trace() callback is invoked with a UTF-8 rendering of the -** SQL statement text as the statement first begins executing. -** ^(Additional sqlite3_trace() callbacks might occur -** as each triggered subprogram is entered. The callbacks for triggers -** contain a UTF-8 SQL comment that identifies the trigger.)^ -** -** ^The callback function registered by sqlite3_profile() is invoked -** as each SQL statement finishes. ^The profile callback contains -** the original statement text and an estimate of wall-clock time -** of how long that statement took to run. -*/ -SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*); -SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_profile(sqlite3*, - void(*xProfile)(void*,const char*,sqlite3_uint64), void*); - -/* -** CAPI3REF: Query Progress Callbacks -** -** ^This routine configures a callback function - the -** progress callback - that is invoked periodically during long -** running calls to [sqlite3_exec()], [sqlite3_step()] and -** [sqlite3_get_table()]. An example use for this -** interface is to keep a GUI updated during a large query. -** -** ^If the progress callback returns non-zero, the operation is -** interrupted. This feature can be used to implement a -** "Cancel" button on a GUI progress dialog box. -** -** The progress handler must not do anything that will modify -** the database connection that invoked the progress handler. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -*/ -SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); - -/* -** CAPI3REF: Opening A New Database Connection -** -** ^These routines open an SQLite database file whose name is given by the -** filename argument. ^The filename argument is interpreted as UTF-8 for -** sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte -** order for sqlite3_open16(). ^(A [database connection] handle is usually -** returned in *ppDb, even if an error occurs. The only exception is that -** if SQLite is unable to allocate memory to hold the [sqlite3] object, -** a NULL will be written into *ppDb instead of a pointer to the [sqlite3] -** object.)^ ^(If the database is opened (and/or created) successfully, then -** [SQLITE_OK] is returned. Otherwise an [error code] is returned.)^ ^The -** [sqlite3_errmsg()] or [sqlite3_errmsg16()] routines can be used to obtain -** an English language description of the error following a failure of any -** of the sqlite3_open() routines. -** -** ^The default encoding for the database will be UTF-8 if -** sqlite3_open() or sqlite3_open_v2() is called and -** UTF-16 in the native byte order if sqlite3_open16() is used. -** -** Whether or not an error occurs when it is opened, resources -** associated with the [database connection] handle should be released by -** passing it to [sqlite3_close()] when it is no longer required. -** -** The sqlite3_open_v2() interface works like sqlite3_open() -** except that it accepts two additional parameters for additional control -** over the new database connection. ^(The flags parameter to -** sqlite3_open_v2() can take one of -** the following three values, optionally combined with the -** [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX], [SQLITE_OPEN_SHAREDCACHE], -** and/or [SQLITE_OPEN_PRIVATECACHE] flags:)^ -** -**
-** ^(
[SQLITE_OPEN_READONLY]
-**
The database is opened in read-only mode. If the database does not -** already exist, an error is returned.
)^ -** -** ^(
[SQLITE_OPEN_READWRITE]
-**
The database is opened for reading and writing if possible, or reading -** only if the file is write protected by the operating system. In either -** case the database must already exist, otherwise an error is returned.
)^ -** -** ^(
[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]
-**
The database is opened for reading and writing, and is creates it if -** it does not already exist. This is the behavior that is always used for -** sqlite3_open() and sqlite3_open16().
)^ -**
-** -** If the 3rd parameter to sqlite3_open_v2() is not one of the -** combinations shown above or one of the combinations shown above combined -** with the [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX], -** [SQLITE_OPEN_SHAREDCACHE] and/or [SQLITE_OPEN_SHAREDCACHE] flags, -** then the behavior is undefined. -** -** ^If the [SQLITE_OPEN_NOMUTEX] flag is set, then the database connection -** opens in the multi-thread [threading mode] as long as the single-thread -** mode has not been set at compile-time or start-time. ^If the -** [SQLITE_OPEN_FULLMUTEX] flag is set then the database connection opens -** in the serialized [threading mode] unless single-thread was -** previously selected at compile-time or start-time. -** ^The [SQLITE_OPEN_SHAREDCACHE] flag causes the database connection to be -** eligible to use [shared cache mode], regardless of whether or not shared -** cache is enabled using [sqlite3_enable_shared_cache()]. ^The -** [SQLITE_OPEN_PRIVATECACHE] flag causes the database connection to not -** participate in [shared cache mode] even if it is enabled. -** -** ^If the filename is ":memory:", then a private, temporary in-memory database -** is created for the connection. ^This in-memory database will vanish when -** the database connection is closed. Future versions of SQLite might -** make use of additional special filenames that begin with the ":" character. -** It is recommended that when a database filename actually does begin with -** a ":" character you should prefix the filename with a pathname such as -** "./" to avoid ambiguity. -** -** ^If the filename is an empty string, then a private, temporary -** on-disk database will be created. ^This private database will be -** automatically deleted as soon as the database connection is closed. -** -** ^The fourth parameter to sqlite3_open_v2() is the name of the -** [sqlite3_vfs] object that defines the operating system interface that -** the new database connection should use. ^If the fourth parameter is -** a NULL pointer then the default [sqlite3_vfs] object is used. -** -** Note to Windows users: The encoding used for the filename argument -** of sqlite3_open() and sqlite3_open_v2() must be UTF-8, not whatever -** codepage is currently defined. Filenames containing international -** characters must be converted to UTF-8 prior to passing them into -** sqlite3_open() or sqlite3_open_v2(). -*/ -SQLITE_API int sqlite3_open( - const char *filename, /* Database filename (UTF-8) */ - sqlite3 **ppDb /* OUT: SQLite db handle */ -); -SQLITE_API int sqlite3_open16( - const void *filename, /* Database filename (UTF-16) */ - sqlite3 **ppDb /* OUT: SQLite db handle */ -); -SQLITE_API int sqlite3_open_v2( - const char *filename, /* Database filename (UTF-8) */ - sqlite3 **ppDb, /* OUT: SQLite db handle */ - int flags, /* Flags */ - const char *zVfs /* Name of VFS module to use */ -); - -/* -** CAPI3REF: Error Codes And Messages -** -** ^The sqlite3_errcode() interface returns the numeric [result code] or -** [extended result code] for the most recent failed sqlite3_* API call -** associated with a [database connection]. If a prior API call failed -** but the most recent API call succeeded, the return value from -** sqlite3_errcode() is undefined. ^The sqlite3_extended_errcode() -** interface is the same except that it always returns the -** [extended result code] even when extended result codes are -** disabled. -** -** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language -** text that describes the error, as either UTF-8 or UTF-16 respectively. -** ^(Memory to hold the error message string is managed internally. -** The application does not need to worry about freeing the result. -** However, the error string might be overwritten or deallocated by -** subsequent calls to other SQLite interface functions.)^ -** -** When the serialized [threading mode] is in use, it might be the -** case that a second error occurs on a separate thread in between -** the time of the first error and the call to these interfaces. -** When that happens, the second error will be reported since these -** interfaces always report the most recent result. To avoid -** this, each thread can obtain exclusive use of the [database connection] D -** by invoking [sqlite3_mutex_enter]([sqlite3_db_mutex](D)) before beginning -** to use D and invoking [sqlite3_mutex_leave]([sqlite3_db_mutex](D)) after -** all calls to the interfaces listed here are completed. -** -** If an interface fails with SQLITE_MISUSE, that means the interface -** was invoked incorrectly by the application. In that case, the -** error code and message may or may not be set. -*/ -SQLITE_API int sqlite3_errcode(sqlite3 *db); -SQLITE_API int sqlite3_extended_errcode(sqlite3 *db); -SQLITE_API const char *sqlite3_errmsg(sqlite3*); -SQLITE_API const void *sqlite3_errmsg16(sqlite3*); - -/* -** CAPI3REF: SQL Statement Object -** KEYWORDS: {prepared statement} {prepared statements} -** -** An instance of this object represents a single SQL statement. -** This object is variously known as a "prepared statement" or a -** "compiled SQL statement" or simply as a "statement". -** -** The life of a statement object goes something like this: -** -**
    -**
  1. Create the object using [sqlite3_prepare_v2()] or a related -** function. -**
  2. Bind values to [host parameters] using the sqlite3_bind_*() -** interfaces. -**
  3. Run the SQL by calling [sqlite3_step()] one or more times. -**
  4. Reset the statement using [sqlite3_reset()] then go back -** to step 2. Do this zero or more times. -**
  5. Destroy the object using [sqlite3_finalize()]. -**
-** -** Refer to documentation on individual methods above for additional -** information. -*/ -typedef struct sqlite3_stmt sqlite3_stmt; - -/* -** CAPI3REF: Run-time Limits -** -** ^(This interface allows the size of various constructs to be limited -** on a connection by connection basis. The first parameter is the -** [database connection] whose limit is to be set or queried. The -** second parameter is one of the [limit categories] that define a -** class of constructs to be size limited. The third parameter is the -** new limit for that construct. The function returns the old limit.)^ -** -** ^If the new limit is a negative number, the limit is unchanged. -** ^(For the limit category of SQLITE_LIMIT_XYZ there is a -** [limits | hard upper bound] -** set by a compile-time C preprocessor macro named -** [limits | SQLITE_MAX_XYZ]. -** (The "_LIMIT_" in the name is changed to "_MAX_".))^ -** ^Attempts to increase a limit above its hard upper bound are -** silently truncated to the hard upper bound. -** -** Run-time limits are intended for use in applications that manage -** both their own internal database and also databases that are controlled -** by untrusted external sources. An example application might be a -** web browser that has its own databases for storing history and -** separate databases controlled by JavaScript applications downloaded -** off the Internet. The internal databases can be given the -** large, default limits. Databases managed by external sources can -** be given much smaller limits designed to prevent a denial of service -** attack. Developers might also want to use the [sqlite3_set_authorizer()] -** interface to further control untrusted SQL. The size of the database -** created by an untrusted script can be contained using the -** [max_page_count] [PRAGMA]. -** -** New run-time limit categories may be added in future releases. -*/ -SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); - -/* -** CAPI3REF: Run-Time Limit Categories -** KEYWORDS: {limit category} {*limit categories} -** -** These constants define various performance limits -** that can be lowered at run-time using [sqlite3_limit()]. -** The synopsis of the meanings of the various limits is shown below. -** Additional information is available at [limits | Limits in SQLite]. -** -**
-** ^(
SQLITE_LIMIT_LENGTH
-**
The maximum size of any string or BLOB or table row.
)^ -** -** ^(
SQLITE_LIMIT_SQL_LENGTH
-**
The maximum length of an SQL statement, in bytes.
)^ -** -** ^(
SQLITE_LIMIT_COLUMN
-**
The maximum number of columns in a table definition or in the -** result set of a [SELECT] or the maximum number of columns in an index -** or in an ORDER BY or GROUP BY clause.
)^ -** -** ^(
SQLITE_LIMIT_EXPR_DEPTH
-**
The maximum depth of the parse tree on any expression.
)^ -** -** ^(
SQLITE_LIMIT_COMPOUND_SELECT
-**
The maximum number of terms in a compound SELECT statement.
)^ -** -** ^(
SQLITE_LIMIT_VDBE_OP
-**
The maximum number of instructions in a virtual machine program -** used to implement an SQL statement.
)^ -** -** ^(
SQLITE_LIMIT_FUNCTION_ARG
-**
The maximum number of arguments on a function.
)^ -** -** ^(
SQLITE_LIMIT_ATTACHED
-**
The maximum number of [ATTACH | attached databases].)^
-** -** ^(
SQLITE_LIMIT_LIKE_PATTERN_LENGTH
-**
The maximum length of the pattern argument to the [LIKE] or -** [GLOB] operators.
)^ -** -** ^(
SQLITE_LIMIT_VARIABLE_NUMBER
-**
The maximum number of variables in an SQL statement that can -** be bound.
)^ -** -** ^(
SQLITE_LIMIT_TRIGGER_DEPTH
-**
The maximum depth of recursion for triggers.
)^ -**
-*/ -#define SQLITE_LIMIT_LENGTH 0 -#define SQLITE_LIMIT_SQL_LENGTH 1 -#define SQLITE_LIMIT_COLUMN 2 -#define SQLITE_LIMIT_EXPR_DEPTH 3 -#define SQLITE_LIMIT_COMPOUND_SELECT 4 -#define SQLITE_LIMIT_VDBE_OP 5 -#define SQLITE_LIMIT_FUNCTION_ARG 6 -#define SQLITE_LIMIT_ATTACHED 7 -#define SQLITE_LIMIT_LIKE_PATTERN_LENGTH 8 -#define SQLITE_LIMIT_VARIABLE_NUMBER 9 -#define SQLITE_LIMIT_TRIGGER_DEPTH 10 - -/* -** CAPI3REF: Compiling An SQL Statement -** KEYWORDS: {SQL statement compiler} -** -** To execute an SQL query, it must first be compiled into a byte-code -** program using one of these routines. -** -** The first argument, "db", is a [database connection] obtained from a -** prior successful call to [sqlite3_open()], [sqlite3_open_v2()] or -** [sqlite3_open16()]. The database connection must not have been closed. -** -** The second argument, "zSql", is the statement to be compiled, encoded -** as either UTF-8 or UTF-16. The sqlite3_prepare() and sqlite3_prepare_v2() -** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2() -** use UTF-16. -** -** ^If the nByte argument is less than zero, then zSql is read up to the -** first zero terminator. ^If nByte is non-negative, then it is the maximum -** number of bytes read from zSql. ^When nByte is non-negative, the -** zSql string ends at either the first '\000' or '\u0000' character or -** the nByte-th byte, whichever comes first. If the caller knows -** that the supplied string is nul-terminated, then there is a small -** performance advantage to be gained by passing an nByte parameter that -** is equal to the number of bytes in the input string including -** the nul-terminator bytes. -** -** ^If pzTail is not NULL then *pzTail is made to point to the first byte -** past the end of the first SQL statement in zSql. These routines only -** compile the first statement in zSql, so *pzTail is left pointing to -** what remains uncompiled. -** -** ^*ppStmt is left pointing to a compiled [prepared statement] that can be -** executed using [sqlite3_step()]. ^If there is an error, *ppStmt is set -** to NULL. ^If the input text contains no SQL (if the input is an empty -** string or a comment) then *ppStmt is set to NULL. -** The calling procedure is responsible for deleting the compiled -** SQL statement using [sqlite3_finalize()] after it has finished with it. -** ppStmt may not be NULL. -** -** ^On success, the sqlite3_prepare() family of routines return [SQLITE_OK]; -** otherwise an [error code] is returned. -** -** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are -** recommended for all new programs. The two older interfaces are retained -** for backwards compatibility, but their use is discouraged. -** ^In the "v2" interfaces, the prepared statement -** that is returned (the [sqlite3_stmt] object) contains a copy of the -** original SQL text. This causes the [sqlite3_step()] interface to -** behave differently in three ways: -** -**
    -**
  1. -** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it -** always used to do, [sqlite3_step()] will automatically recompile the SQL -** statement and try to run it again. ^If the schema has changed in -** a way that makes the statement no longer valid, [sqlite3_step()] will still -** return [SQLITE_SCHEMA]. But unlike the legacy behavior, [SQLITE_SCHEMA] is -** now a fatal error. Calling [sqlite3_prepare_v2()] again will not make the -** error go away. Note: use [sqlite3_errmsg()] to find the text -** of the parsing error that results in an [SQLITE_SCHEMA] return. -**
    2. -** -**
  2. -** ^When an error occurs, [sqlite3_step()] will return one of the detailed -** [error codes] or [extended error codes]. ^The legacy behavior was that -** [sqlite3_step()] would only return a generic [SQLITE_ERROR] result code -** and the application would have to make a second call to [sqlite3_reset()] -** in order to find the underlying cause of the problem. With the "v2" prepare -** interfaces, the underlying reason for the error is returned immediately. -**
    3. -** -**
  3. -** ^If the value of a [parameter | host parameter] in the WHERE clause might -** change the query plan for a statement, then the statement may be -** automatically recompiled (as if there had been a schema change) on the first -** [sqlite3_step()] call following any change to the -** [sqlite3_bind_text | bindings] of the [parameter]. -**
    4. -**
-*/ -SQLITE_API int sqlite3_prepare( - sqlite3 *db, /* Database handle */ - const char *zSql, /* SQL statement, UTF-8 encoded */ - int nByte, /* Maximum length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: Statement handle */ - const char **pzTail /* OUT: Pointer to unused portion of zSql */ -); -SQLITE_API int sqlite3_prepare_v2( - sqlite3 *db, /* Database handle */ - const char *zSql, /* SQL statement, UTF-8 encoded */ - int nByte, /* Maximum length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: Statement handle */ - const char **pzTail /* OUT: Pointer to unused portion of zSql */ -); -SQLITE_API int sqlite3_prepare16( - sqlite3 *db, /* Database handle */ - const void *zSql, /* SQL statement, UTF-16 encoded */ - int nByte, /* Maximum length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: Statement handle */ - const void **pzTail /* OUT: Pointer to unused portion of zSql */ -); -SQLITE_API int sqlite3_prepare16_v2( - sqlite3 *db, /* Database handle */ - const void *zSql, /* SQL statement, UTF-16 encoded */ - int nByte, /* Maximum length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: Statement handle */ - const void **pzTail /* OUT: Pointer to unused portion of zSql */ -); - -/* -** CAPI3REF: Retrieving Statement SQL -** -** ^This interface can be used to retrieve a saved copy of the original -** SQL text used to create a [prepared statement] if that statement was -** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()]. -*/ -SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Dynamically Typed Value Object -** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value} -** -** SQLite uses the sqlite3_value object to represent all values -** that can be stored in a database table. SQLite uses dynamic typing -** for the values it stores. ^Values stored in sqlite3_value objects -** can be integers, floating point values, strings, BLOBs, or NULL. -** -** An sqlite3_value object may be either "protected" or "unprotected". -** Some interfaces require a protected sqlite3_value. Other interfaces -** will accept either a protected or an unprotected sqlite3_value. -** Every interface that accepts sqlite3_value arguments specifies -** whether or not it requires a protected sqlite3_value. -** -** The terms "protected" and "unprotected" refer to whether or not -** a mutex is held. A internal mutex is held for a protected -** sqlite3_value object but no mutex is held for an unprotected -** sqlite3_value object. If SQLite is compiled to be single-threaded -** (with [SQLITE_THREADSAFE=0] and with [sqlite3_threadsafe()] returning 0) -** or if SQLite is run in one of reduced mutex modes -** [SQLITE_CONFIG_SINGLETHREAD] or [SQLITE_CONFIG_MULTITHREAD] -** then there is no distinction between protected and unprotected -** sqlite3_value objects and they can be used interchangeably. However, -** for maximum code portability it is recommended that applications -** still make the distinction between between protected and unprotected -** sqlite3_value objects even when not strictly required. -** -** ^The sqlite3_value objects that are passed as parameters into the -** implementation of [application-defined SQL functions] are protected. -** ^The sqlite3_value object returned by -** [sqlite3_column_value()] is unprotected. -** Unprotected sqlite3_value objects may only be used with -** [sqlite3_result_value()] and [sqlite3_bind_value()]. -** The [sqlite3_value_blob | sqlite3_value_type()] family of -** interfaces require protected sqlite3_value objects. -*/ -typedef struct Mem sqlite3_value; - -/* -** CAPI3REF: SQL Function Context Object -** -** The context in which an SQL function executes is stored in an -** sqlite3_context object. ^A pointer to an sqlite3_context object -** is always first parameter to [application-defined SQL functions]. -** The application-defined SQL function implementation will pass this -** pointer through into calls to [sqlite3_result_int | sqlite3_result()], -** [sqlite3_aggregate_context()], [sqlite3_user_data()], -** [sqlite3_context_db_handle()], [sqlite3_get_auxdata()], -** and/or [sqlite3_set_auxdata()]. -*/ -typedef struct sqlite3_context sqlite3_context; - -/* -** CAPI3REF: Binding Values To Prepared Statements -** KEYWORDS: {host parameter} {host parameters} {host parameter name} -** KEYWORDS: {SQL parameter} {SQL parameters} {parameter binding} -** -** ^(In the SQL statement text input to [sqlite3_prepare_v2()] and its variants, -** literals may be replaced by a [parameter] that matches one of following -** templates: -** -** -** -** In the templates above, NNN represents an integer literal, -** and VVV represents an alphanumeric identifer.)^ ^The values of these -** parameters (also called "host parameter names" or "SQL parameters") -** can be set using the sqlite3_bind_*() routines defined here. -** -** ^The first argument to the sqlite3_bind_*() routines is always -** a pointer to the [sqlite3_stmt] object returned from -** [sqlite3_prepare_v2()] or its variants. -** -** ^The second argument is the index of the SQL parameter to be set. -** ^The leftmost SQL parameter has an index of 1. ^When the same named -** SQL parameter is used more than once, second and subsequent -** occurrences have the same index as the first occurrence. -** ^The index for named parameters can be looked up using the -** [sqlite3_bind_parameter_index()] API if desired. ^The index -** for "?NNN" parameters is the value of NNN. -** ^The NNN value must be between 1 and the [sqlite3_limit()] -** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999). -** -** ^The third argument is the value to bind to the parameter. -** -** ^(In those routines that have a fourth argument, its value is the -** number of bytes in the parameter. To be clear: the value is the -** number of bytes in the value, not the number of characters.)^ -** ^If the fourth parameter is negative, the length of the string is -** the number of bytes up to the first zero terminator. -** -** ^The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and -** sqlite3_bind_text16() is a destructor used to dispose of the BLOB or -** string after SQLite has finished with it. ^If the fifth argument is -** the special value [SQLITE_STATIC], then SQLite assumes that the -** information is in static, unmanaged space and does not need to be freed. -** ^If the fifth argument has the value [SQLITE_TRANSIENT], then -** SQLite makes its own private copy of the data immediately, before -** the sqlite3_bind_*() routine returns. -** -** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that -** is filled with zeroes. ^A zeroblob uses a fixed amount of memory -** (just an integer to hold its size) while it is being processed. -** Zeroblobs are intended to serve as placeholders for BLOBs whose -** content is later written using -** [sqlite3_blob_open | incremental BLOB I/O] routines. -** ^A negative value for the zeroblob results in a zero-length BLOB. -** -** ^If any of the sqlite3_bind_*() routines are called with a NULL pointer -** for the [prepared statement] or with a prepared statement for which -** [sqlite3_step()] has been called more recently than [sqlite3_reset()], -** then the call will return [SQLITE_MISUSE]. If any sqlite3_bind_() -** routine is passed a [prepared statement] that has been finalized, the -** result is undefined and probably harmful. -** -** ^Bindings are not cleared by the [sqlite3_reset()] routine. -** ^Unbound parameters are interpreted as NULL. -** -** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an -** [error code] if anything goes wrong. -** ^[SQLITE_RANGE] is returned if the parameter -** index is out of range. ^[SQLITE_NOMEM] is returned if malloc() fails. -** -** See also: [sqlite3_bind_parameter_count()], -** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()]. -*/ -SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*)); -SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double); -SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int); -SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64); -SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int); -SQLITE_API int sqlite3_bind_text(sqlite3_stmt*, int, const char*, int n, void(*)(void*)); -SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*)); -SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*); -SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n); - -/* -** CAPI3REF: Number Of SQL Parameters -** -** ^This routine can be used to find the number of [SQL parameters] -** in a [prepared statement]. SQL parameters are tokens of the -** form "?", "?NNN", ":AAA", "$AAA", or "@AAA" that serve as -** placeholders for values that are [sqlite3_bind_blob | bound] -** to the parameters at a later time. -** -** ^(This routine actually returns the index of the largest (rightmost) -** parameter. For all forms except ?NNN, this will correspond to the -** number of unique parameters. If parameters of the ?NNN form are used, -** there may be gaps in the list.)^ -** -** See also: [sqlite3_bind_blob|sqlite3_bind()], -** [sqlite3_bind_parameter_name()], and -** [sqlite3_bind_parameter_index()]. -*/ -SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*); - -/* -** CAPI3REF: Name Of A Host Parameter -** -** ^The sqlite3_bind_parameter_name(P,N) interface returns -** the name of the N-th [SQL parameter] in the [prepared statement] P. -** ^(SQL parameters of the form "?NNN" or ":AAA" or "@AAA" or "$AAA" -** have a name which is the string "?NNN" or ":AAA" or "@AAA" or "$AAA" -** respectively. -** In other words, the initial ":" or "$" or "@" or "?" -** is included as part of the name.)^ -** ^Parameters of the form "?" without a following integer have no name -** and are referred to as "nameless" or "anonymous parameters". -** -** ^The first host parameter has an index of 1, not 0. -** -** ^If the value N is out of range or if the N-th parameter is -** nameless, then NULL is returned. ^The returned string is -** always in UTF-8 encoding even if the named parameter was -** originally specified as UTF-16 in [sqlite3_prepare16()] or -** [sqlite3_prepare16_v2()]. -** -** See also: [sqlite3_bind_blob|sqlite3_bind()], -** [sqlite3_bind_parameter_count()], and -** [sqlite3_bind_parameter_index()]. -*/ -SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int); - -/* -** CAPI3REF: Index Of A Parameter With A Given Name -** -** ^Return the index of an SQL parameter given its name. ^The -** index value returned is suitable for use as the second -** parameter to [sqlite3_bind_blob|sqlite3_bind()]. ^A zero -** is returned if no matching parameter is found. ^The parameter -** name must be given in UTF-8 even if the original statement -** was prepared from UTF-16 text using [sqlite3_prepare16_v2()]. -** -** See also: [sqlite3_bind_blob|sqlite3_bind()], -** [sqlite3_bind_parameter_count()], and -** [sqlite3_bind_parameter_index()]. -*/ -SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName); - -/* -** CAPI3REF: Reset All Bindings On A Prepared Statement -** -** ^Contrary to the intuition of many, [sqlite3_reset()] does not reset -** the [sqlite3_bind_blob | bindings] on a [prepared statement]. -** ^Use this routine to reset all host parameters to NULL. -*/ -SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*); - -/* -** CAPI3REF: Number Of Columns In A Result Set -** -** ^Return the number of columns in the result set returned by the -** [prepared statement]. ^This routine returns 0 if pStmt is an SQL -** statement that does not return data (for example an [UPDATE]). -*/ -SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Column Names In A Result Set -** -** ^These routines return the name assigned to a particular column -** in the result set of a [SELECT] statement. ^The sqlite3_column_name() -** interface returns a pointer to a zero-terminated UTF-8 string -** and sqlite3_column_name16() returns a pointer to a zero-terminated -** UTF-16 string. ^The first parameter is the [prepared statement] -** that implements the [SELECT] statement. ^The second parameter is the -** column number. ^The leftmost column is number 0. -** -** ^The returned string pointer is valid until either the [prepared statement] -** is destroyed by [sqlite3_finalize()] or until the next call to -** sqlite3_column_name() or sqlite3_column_name16() on the same column. -** -** ^If sqlite3_malloc() fails during the processing of either routine -** (for example during a conversion from UTF-8 to UTF-16) then a -** NULL pointer is returned. -** -** ^The name of a result column is the value of the "AS" clause for -** that column, if there is an AS clause. If there is no AS clause -** then the name of the column is unspecified and may change from -** one release of SQLite to the next. -*/ -SQLITE_API const char *sqlite3_column_name(sqlite3_stmt*, int N); -SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt*, int N); - -/* -** CAPI3REF: Source Of Data In A Query Result -** -** ^These routines provide a means to determine the database, table, and -** table column that is the origin of a particular result column in -** [SELECT] statement. -** ^The name of the database or table or column can be returned as -** either a UTF-8 or UTF-16 string. ^The _database_ routines return -** the database name, the _table_ routines return the table name, and -** the origin_ routines return the column name. -** ^The returned string is valid until the [prepared statement] is destroyed -** using [sqlite3_finalize()] or until the same information is requested -** again in a different encoding. -** -** ^The names returned are the original un-aliased names of the -** database, table, and column. -** -** ^The first argument to these interfaces is a [prepared statement]. -** ^These functions return information about the Nth result column returned by -** the statement, where N is the second function argument. -** ^The left-most column is column 0 for these routines. -** -** ^If the Nth column returned by the statement is an expression or -** subquery and is not a column value, then all of these functions return -** NULL. ^These routine might also return NULL if a memory allocation error -** occurs. ^Otherwise, they return the name of the attached database, table, -** or column that query result column was extracted from. -** -** ^As with all other SQLite APIs, those whose names end with "16" return -** UTF-16 encoded strings and the other functions return UTF-8. -** -** ^These APIs are only available if the library was compiled with the -** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol. -** -** If two or more threads call one or more of these routines against the same -** prepared statement and column at the same time then the results are -** undefined. -** -** If two or more threads call one or more -** [sqlite3_column_database_name | column metadata interfaces] -** for the same [prepared statement] and result column -** at the same time then the results are undefined. -*/ -SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt*,int); -SQLITE_API const void *sqlite3_column_database_name16(sqlite3_stmt*,int); -SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt*,int); -SQLITE_API const void *sqlite3_column_table_name16(sqlite3_stmt*,int); -SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt*,int); -SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt*,int); - -/* -** CAPI3REF: Declared Datatype Of A Query Result -** -** ^(The first parameter is a [prepared statement]. -** If this statement is a [SELECT] statement and the Nth column of the -** returned result set of that [SELECT] is a table column (not an -** expression or subquery) then the declared type of the table -** column is returned.)^ ^If the Nth column of the result set is an -** expression or subquery, then a NULL pointer is returned. -** ^The returned string is always UTF-8 encoded. -** -** ^(For example, given the database schema: -** -** CREATE TABLE t1(c1 VARIANT); -** -** and the following statement to be compiled: -** -** SELECT c1 + 1, c1 FROM t1; -** -** this routine would return the string "VARIANT" for the second result -** column (i==1), and a NULL pointer for the first result column (i==0).)^ -** -** ^SQLite uses dynamic run-time typing. ^So just because a column -** is declared to contain a particular type does not mean that the -** data stored in that column is of the declared type. SQLite is -** strongly typed, but the typing is dynamic not static. ^Type -** is associated with individual values, not with the containers -** used to hold those values. -*/ -SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt*,int); -SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int); - -/* -** CAPI3REF: Evaluate An SQL Statement -** -** After a [prepared statement] has been prepared using either -** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy -** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this function -** must be called one or more times to evaluate the statement. -** -** The details of the behavior of the sqlite3_step() interface depend -** on whether the statement was prepared using the newer "v2" interface -** [sqlite3_prepare_v2()] and [sqlite3_prepare16_v2()] or the older legacy -** interface [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the -** new "v2" interface is recommended for new applications but the legacy -** interface will continue to be supported. -** -** ^In the legacy interface, the return value will be either [SQLITE_BUSY], -** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE]. -** ^With the "v2" interface, any of the other [result codes] or -** [extended result codes] might be returned as well. -** -** ^[SQLITE_BUSY] means that the database engine was unable to acquire the -** database locks it needs to do its job. ^If the statement is a [COMMIT] -** or occurs outside of an explicit transaction, then you can retry the -** statement. If the statement is not a [COMMIT] and occurs within a -** explicit transaction then you should rollback the transaction before -** continuing. -** -** ^[SQLITE_DONE] means that the statement has finished executing -** successfully. sqlite3_step() should not be called again on this virtual -** machine without first calling [sqlite3_reset()] to reset the virtual -** machine back to its initial state. -** -** ^If the SQL statement being executed returns any data, then [SQLITE_ROW] -** is returned each time a new row of data is ready for processing by the -** caller. The values may be accessed using the [column access functions]. -** sqlite3_step() is called again to retrieve the next row of data. -** -** ^[SQLITE_ERROR] means that a run-time error (such as a constraint -** violation) has occurred. sqlite3_step() should not be called again on -** the VM. More information may be found by calling [sqlite3_errmsg()]. -** ^With the legacy interface, a more specific error code (for example, -** [SQLITE_INTERRUPT], [SQLITE_SCHEMA], [SQLITE_CORRUPT], and so forth) -** can be obtained by calling [sqlite3_reset()] on the -** [prepared statement]. ^In the "v2" interface, -** the more specific error code is returned directly by sqlite3_step(). -** -** [SQLITE_MISUSE] means that the this routine was called inappropriately. -** Perhaps it was called on a [prepared statement] that has -** already been [sqlite3_finalize | finalized] or on one that had -** previously returned [SQLITE_ERROR] or [SQLITE_DONE]. Or it could -** be the case that the same database connection is being used by two or -** more threads at the same moment in time. -** -** Goofy Interface Alert: In the legacy interface, the sqlite3_step() -** API always returns a generic error code, [SQLITE_ERROR], following any -** error other than [SQLITE_BUSY] and [SQLITE_MISUSE]. You must call -** [sqlite3_reset()] or [sqlite3_finalize()] in order to find one of the -** specific [error codes] that better describes the error. -** We admit that this is a goofy design. The problem has been fixed -** with the "v2" interface. If you prepare all of your SQL statements -** using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] instead -** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces, -** then the more specific [error codes] are returned directly -** by sqlite3_step(). The use of the "v2" interface is recommended. -*/ -SQLITE_API int sqlite3_step(sqlite3_stmt*); - -/* -** CAPI3REF: Number of columns in a result set -** -** ^The sqlite3_data_count(P) the number of columns in the -** of the result set of [prepared statement] P. -*/ -SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Fundamental Datatypes -** KEYWORDS: SQLITE_TEXT -** -** ^(Every value in SQLite has one of five fundamental datatypes: -** -** )^ -** -** These constants are codes for each of those types. -** -** Note that the SQLITE_TEXT constant was also used in SQLite version 2 -** for a completely different meaning. Software that links against both -** SQLite version 2 and SQLite version 3 should use SQLITE3_TEXT, not -** SQLITE_TEXT. -*/ -#define SQLITE_INTEGER 1 -#define SQLITE_FLOAT 2 -#define SQLITE_BLOB 4 -#define SQLITE_NULL 5 -#ifdef SQLITE_TEXT -# undef SQLITE_TEXT -#else -# define SQLITE_TEXT 3 -#endif -#define SQLITE3_TEXT 3 - -/* -** CAPI3REF: Result Values From A Query -** KEYWORDS: {column access functions} -** -** These routines form the "result set" interface. -** -** ^These routines return information about a single column of the current -** result row of a query. ^In every case the first argument is a pointer -** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*] -** that was returned from [sqlite3_prepare_v2()] or one of its variants) -** and the second argument is the index of the column for which information -** should be returned. ^The leftmost column of the result set has the index 0. -** ^The number of columns in the result can be determined using -** [sqlite3_column_count()]. -** -** If the SQL statement does not currently point to a valid row, or if the -** column index is out of range, the result is undefined. -** These routines may only be called when the most recent call to -** [sqlite3_step()] has returned [SQLITE_ROW] and neither -** [sqlite3_reset()] nor [sqlite3_finalize()] have been called subsequently. -** If any of these routines are called after [sqlite3_reset()] or -** [sqlite3_finalize()] or after [sqlite3_step()] has returned -** something other than [SQLITE_ROW], the results are undefined. -** If [sqlite3_step()] or [sqlite3_reset()] or [sqlite3_finalize()] -** are called from a different thread while any of these routines -** are pending, then the results are undefined. -** -** ^The sqlite3_column_type() routine returns the -** [SQLITE_INTEGER | datatype code] for the initial data type -** of the result column. ^The returned value is one of [SQLITE_INTEGER], -** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL]. The value -** returned by sqlite3_column_type() is only meaningful if no type -** conversions have occurred as described below. After a type conversion, -** the value returned by sqlite3_column_type() is undefined. Future -** versions of SQLite may change the behavior of sqlite3_column_type() -** following a type conversion. -** -** ^If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes() -** routine returns the number of bytes in that BLOB or string. -** ^If the result is a UTF-16 string, then sqlite3_column_bytes() converts -** the string to UTF-8 and then returns the number of bytes. -** ^If the result is a numeric value then sqlite3_column_bytes() uses -** [sqlite3_snprintf()] to convert that value to a UTF-8 string and returns -** the number of bytes in that string. -** ^The value returned does not include the zero terminator at the end -** of the string. ^For clarity: the value returned is the number of -** bytes in the string, not the number of characters. -** -** ^Strings returned by sqlite3_column_text() and sqlite3_column_text16(), -** even empty strings, are always zero terminated. ^The return -** value from sqlite3_column_blob() for a zero-length BLOB is an arbitrary -** pointer, possibly even a NULL pointer. -** -** ^The sqlite3_column_bytes16() routine is similar to sqlite3_column_bytes() -** but leaves the result in UTF-16 in native byte order instead of UTF-8. -** ^The zero terminator is not included in this count. -** -** ^The object returned by [sqlite3_column_value()] is an -** [unprotected sqlite3_value] object. An unprotected sqlite3_value object -** may only be used with [sqlite3_bind_value()] and [sqlite3_result_value()]. -** If the [unprotected sqlite3_value] object returned by -** [sqlite3_column_value()] is used in any other way, including calls -** to routines like [sqlite3_value_int()], [sqlite3_value_text()], -** or [sqlite3_value_bytes()], then the behavior is undefined. -** -** These routines attempt to convert the value where appropriate. ^For -** example, if the internal representation is FLOAT and a text result -** is requested, [sqlite3_snprintf()] is used internally to perform the -** conversion automatically. ^(The following table details the conversions -** that are applied: -** -**
-** -**
Internal
Type 		Requested
Type 		Conversion -** -**
NULL INTEGER Result is 0 -**
NULL FLOAT Result is 0.0 -**
NULL TEXT Result is NULL pointer -**
NULL BLOB Result is NULL pointer -**
INTEGER FLOAT Convert from integer to float -**
INTEGER TEXT ASCII rendering of the integer -**
INTEGER BLOB Same as INTEGER->TEXT -**
FLOAT INTEGER Convert from float to integer -**
FLOAT TEXT ASCII rendering of the float -**
FLOAT BLOB Same as FLOAT->TEXT -**
TEXT INTEGER Use atoi() -**
TEXT FLOAT Use atof() -**
TEXT BLOB No change -**
BLOB INTEGER Convert to TEXT then use atoi() -**
BLOB FLOAT Convert to TEXT then use atof() -**
BLOB TEXT Add a zero terminator if needed -**
-**
)^ -** -** The table above makes reference to standard C library functions atoi() -** and atof(). SQLite does not really use these functions. It has its -** own equivalent internal routines. The atoi() and atof() names are -** used in the table for brevity and because they are familiar to most -** C programmers. -** -** ^Note that when type conversions occur, pointers returned by prior -** calls to sqlite3_column_blob(), sqlite3_column_text(), and/or -** sqlite3_column_text16() may be invalidated. -** ^(Type conversions and pointer invalidations might occur -** in the following cases: -** -** )^ -** -** ^Conversions between UTF-16be and UTF-16le are always done in place and do -** not invalidate a prior pointer, though of course the content of the buffer -** that the prior pointer points to will have been modified. Other kinds -** of conversion are done in place when it is possible, but sometimes they -** are not possible and in those cases prior pointers are invalidated. -** -** ^(The safest and easiest to remember policy is to invoke these routines -** in one of the following ways: -** -** )^ -** -** In other words, you should call sqlite3_column_text(), -** sqlite3_column_blob(), or sqlite3_column_text16() first to force the result -** into the desired format, then invoke sqlite3_column_bytes() or -** sqlite3_column_bytes16() to find the size of the result. Do not mix calls -** to sqlite3_column_text() or sqlite3_column_blob() with calls to -** sqlite3_column_bytes16(), and do not mix calls to sqlite3_column_text16() -** with calls to sqlite3_column_bytes(). -** -** ^The pointers returned are valid until a type conversion occurs as -** described above, or until [sqlite3_step()] or [sqlite3_reset()] or -** [sqlite3_finalize()] is called. ^The memory space used to hold strings -** and BLOBs is freed automatically. Do not pass the pointers returned -** [sqlite3_column_blob()], [sqlite3_column_text()], etc. into -** [sqlite3_free()]. -** -** ^(If a memory allocation error occurs during the evaluation of any -** of these routines, a default value is returned. The default value -** is either the integer 0, the floating point number 0.0, or a NULL -** pointer. Subsequent calls to [sqlite3_errcode()] will return -** [SQLITE_NOMEM].)^ -*/ -SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol); -SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_int(sqlite3_stmt*, int iCol); -SQLITE_API sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol); -SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol); -SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol); -SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol); - -/* -** CAPI3REF: Destroy A Prepared Statement Object -** -** ^The sqlite3_finalize() function is called to delete a [prepared statement]. -** ^If the statement was executed successfully or not executed at all, then -** SQLITE_OK is returned. ^If execution of the statement failed then an -** [error code] or [extended error code] is returned. -** -** ^This routine can be called at any point during the execution of the -** [prepared statement]. ^If the virtual machine has not -** completed execution when this routine is called, that is like -** encountering an error or an [sqlite3_interrupt | interrupt]. -** ^Incomplete updates may be rolled back and transactions canceled, -** depending on the circumstances, and the -** [error code] returned will be [SQLITE_ABORT]. -*/ -SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Reset A Prepared Statement Object -** -** The sqlite3_reset() function is called to reset a [prepared statement] -** object back to its initial state, ready to be re-executed. -** ^Any SQL statement variables that had values bound to them using -** the [sqlite3_bind_blob | sqlite3_bind_*() API] retain their values. -** Use [sqlite3_clear_bindings()] to reset the bindings. -** -** ^The [sqlite3_reset(S)] interface resets the [prepared statement] S -** back to the beginning of its program. -** -** ^If the most recent call to [sqlite3_step(S)] for the -** [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE], -** or if [sqlite3_step(S)] has never before been called on S, -** then [sqlite3_reset(S)] returns [SQLITE_OK]. -** -** ^If the most recent call to [sqlite3_step(S)] for the -** [prepared statement] S indicated an error, then -** [sqlite3_reset(S)] returns an appropriate [error code]. -** -** ^The [sqlite3_reset(S)] interface does not change the values -** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S. -*/ -SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Create Or Redefine SQL Functions -** KEYWORDS: {function creation routines} -** KEYWORDS: {application-defined SQL function} -** KEYWORDS: {application-defined SQL functions} -** -** ^These two functions (collectively known as "function creation routines") -** are used to add SQL functions or aggregates or to redefine the behavior -** of existing SQL functions or aggregates. The only difference between the -** two is that the second parameter, the name of the (scalar) function or -** aggregate, is encoded in UTF-8 for sqlite3_create_function() and UTF-16 -** for sqlite3_create_function16(). -** -** ^The first parameter is the [database connection] to which the SQL -** function is to be added. ^If an application uses more than one database -** connection then application-defined SQL functions must be added -** to each database connection separately. -** -** The second parameter is the name of the SQL function to be created or -** redefined. ^The length of the name is limited to 255 bytes, exclusive of -** the zero-terminator. Note that the name length limit is in bytes, not -** characters. ^Any attempt to create a function with a longer name -** will result in [SQLITE_ERROR] being returned. -** -** ^The third parameter (nArg) -** is the number of arguments that the SQL function or -** aggregate takes. ^If this parameter is -1, then the SQL function or -** aggregate may take any number of arguments between 0 and the limit -** set by [sqlite3_limit]([SQLITE_LIMIT_FUNCTION_ARG]). If the third -** parameter is less than -1 or greater than 127 then the behavior is -** undefined. -** -** The fourth parameter, eTextRep, specifies what -** [SQLITE_UTF8 | text encoding] this SQL function prefers for -** its parameters. Any SQL function implementation should be able to work -** work with UTF-8, UTF-16le, or UTF-16be. But some implementations may be -** more efficient with one encoding than another. ^An application may -** invoke sqlite3_create_function() or sqlite3_create_function16() multiple -** times with the same function but with different values of eTextRep. -** ^When multiple implementations of the same function are available, SQLite -** will pick the one that involves the least amount of data conversion. -** If there is only a single implementation which does not care what text -** encoding is used, then the fourth argument should be [SQLITE_ANY]. -** -** ^(The fifth parameter is an arbitrary pointer. The implementation of the -** function can gain access to this pointer using [sqlite3_user_data()].)^ -** -** The seventh, eighth and ninth parameters, xFunc, xStep and xFinal, are -** pointers to C-language functions that implement the SQL function or -** aggregate. ^A scalar SQL function requires an implementation of the xFunc -** callback only; NULL pointers should be passed as the xStep and xFinal -** parameters. ^An aggregate SQL function requires an implementation of xStep -** and xFinal and NULL should be passed for xFunc. ^To delete an existing -** SQL function or aggregate, pass NULL for all three function callbacks. -** -** ^It is permitted to register multiple implementations of the same -** functions with the same name but with either differing numbers of -** arguments or differing preferred text encodings. ^SQLite will use -** the implementation that most closely matches the way in which the -** SQL function is used. ^A function implementation with a non-negative -** nArg parameter is a better match than a function implementation with -** a negative nArg. ^A function where the preferred text encoding -** matches the database encoding is a better -** match than a function where the encoding is different. -** ^A function where the encoding difference is between UTF16le and UTF16be -** is a closer match than a function where the encoding difference is -** between UTF8 and UTF16. -** -** ^Built-in functions may be overloaded by new application-defined functions. -** ^The first application-defined function with a given name overrides all -** built-in functions in the same [database connection] with the same name. -** ^Subsequent application-defined functions of the same name only override -** prior application-defined functions that are an exact match for the -** number of parameters and preferred encoding. -** -** ^An application-defined function is permitted to call other -** SQLite interfaces. However, such calls must not -** close the database connection nor finalize or reset the prepared -** statement in which the function is running. -*/ -SQLITE_API int sqlite3_create_function( - sqlite3 *db, - const char *zFunctionName, - int nArg, - int eTextRep, - void *pApp, - void (*xFunc)(sqlite3_context*,int,sqlite3_value**), - void (*xStep)(sqlite3_context*,int,sqlite3_value**), - void (*xFinal)(sqlite3_context*) -); -SQLITE_API int sqlite3_create_function16( - sqlite3 *db, - const void *zFunctionName, - int nArg, - int eTextRep, - void *pApp, - void (*xFunc)(sqlite3_context*,int,sqlite3_value**), - void (*xStep)(sqlite3_context*,int,sqlite3_value**), - void (*xFinal)(sqlite3_context*) -); - -/* -** CAPI3REF: Text Encodings -** -** These constant define integer codes that represent the various -** text encodings supported by SQLite. -*/ -#define SQLITE_UTF8 1 -#define SQLITE_UTF16LE 2 -#define SQLITE_UTF16BE 3 -#define SQLITE_UTF16 4 /* Use native byte order */ -#define SQLITE_ANY 5 /* sqlite3_create_function only */ -#define SQLITE_UTF16_ALIGNED 8 /* sqlite3_create_collation only */ - -/* -** CAPI3REF: Deprecated Functions -** DEPRECATED -** -** These functions are [deprecated]. In order to maintain -** backwards compatibility with older code, these functions continue -** to be supported. However, new applications should avoid -** the use of these functions. To help encourage people to avoid -** using these functions, we are not going to tell you what they do. -*/ -#ifndef SQLITE_OMIT_DEPRECATED -SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*); -SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*); -SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*); -SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void); -SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void); -SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),void*,sqlite3_int64); -#endif - -/* -** CAPI3REF: Obtaining SQL Function Parameter Values -** -** The C-language implementation of SQL functions and aggregates uses -** this set of interface routines to access the parameter values on -** the function or aggregate. -** -** The xFunc (for scalar functions) or xStep (for aggregates) parameters -** to [sqlite3_create_function()] and [sqlite3_create_function16()] -** define callbacks that implement the SQL functions and aggregates. -** The 4th parameter to these callbacks is an array of pointers to -** [protected sqlite3_value] objects. There is one [sqlite3_value] object for -** each parameter to the SQL function. These routines are used to -** extract values from the [sqlite3_value] objects. -** -** These routines work only with [protected sqlite3_value] objects. -** Any attempt to use these routines on an [unprotected sqlite3_value] -** object results in undefined behavior. -** -** ^These routines work just like the corresponding [column access functions] -** except that these routines take a single [protected sqlite3_value] object -** pointer instead of a [sqlite3_stmt*] pointer and an integer column number. -** -** ^The sqlite3_value_text16() interface extracts a UTF-16 string -** in the native byte-order of the host machine. ^The -** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces -** extract UTF-16 strings as big-endian and little-endian respectively. -** -** ^(The sqlite3_value_numeric_type() interface attempts to apply -** numeric affinity to the value. This means that an attempt is -** made to convert the value to an integer or floating point. If -** such a conversion is possible without loss of information (in other -** words, if the value is a string that looks like a number) -** then the conversion is performed. Otherwise no conversion occurs. -** The [SQLITE_INTEGER | datatype] after conversion is returned.)^ -** -** Please pay particular attention to the fact that the pointer returned -** from [sqlite3_value_blob()], [sqlite3_value_text()], or -** [sqlite3_value_text16()] can be invalidated by a subsequent call to -** [sqlite3_value_bytes()], [sqlite3_value_bytes16()], [sqlite3_value_text()], -** or [sqlite3_value_text16()]. -** -** These routines must be called from the same thread as -** the SQL function that supplied the [sqlite3_value*] parameters. -*/ -SQLITE_API const void *sqlite3_value_blob(sqlite3_value*); -SQLITE_API int sqlite3_value_bytes(sqlite3_value*); -SQLITE_API int sqlite3_value_bytes16(sqlite3_value*); -SQLITE_API double sqlite3_value_double(sqlite3_value*); -SQLITE_API int sqlite3_value_int(sqlite3_value*); -SQLITE_API sqlite3_int64 sqlite3_value_int64(sqlite3_value*); -SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value*); -SQLITE_API const void *sqlite3_value_text16(sqlite3_value*); -SQLITE_API const void *sqlite3_value_text16le(sqlite3_value*); -SQLITE_API const void *sqlite3_value_text16be(sqlite3_value*); -SQLITE_API int sqlite3_value_type(sqlite3_value*); -SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*); - -/* -** CAPI3REF: Obtain Aggregate Function Context -** -** Implementions of aggregate SQL functions use this -** routine to allocate memory for storing their state. -** -** ^The first time the sqlite3_aggregate_context(C,N) routine is called -** for a particular aggregate function, SQLite -** allocates N of memory, zeroes out that memory, and returns a pointer -** to the new memory. ^On second and subsequent calls to -** sqlite3_aggregate_context() for the same aggregate function instance, -** the same buffer is returned. Sqlite3_aggregate_context() is normally -** called once for each invocation of the xStep callback and then one -** last time when the xFinal callback is invoked. ^(When no rows match -** an aggregate query, the xStep() callback of the aggregate function -** implementation is never called and xFinal() is called exactly once. -** In those cases, sqlite3_aggregate_context() might be called for the -** first time from within xFinal().)^ -** -** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer if N is -** less than or equal to zero or if a memory allocate error occurs. -** -** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is -** determined by the N parameter on first successful call. Changing the -** value of N in subsequent call to sqlite3_aggregate_context() within -** the same aggregate function instance will not resize the memory -** allocation.)^ -** -** ^SQLite automatically frees the memory allocated by -** sqlite3_aggregate_context() when the aggregate query concludes. -** -** The first parameter must be a copy of the -** [sqlite3_context | SQL function context] that is the first parameter -** to the xStep or xFinal callback routine that implements the aggregate -** function. -** -** This routine must be called from the same thread in which -** the aggregate SQL function is running. -*/ -SQLITE_API void *sqlite3_aggregate_context(sqlite3_context*, int nBytes); - -/* -** CAPI3REF: User Data For Functions -** -** ^The sqlite3_user_data() interface returns a copy of -** the pointer that was the pUserData parameter (the 5th parameter) -** of the [sqlite3_create_function()] -** and [sqlite3_create_function16()] routines that originally -** registered the application defined function. -** -** This routine must be called from the same thread in which -** the application-defined function is running. -*/ -SQLITE_API void *sqlite3_user_data(sqlite3_context*); - -/* -** CAPI3REF: Database Connection For Functions -** -** ^The sqlite3_context_db_handle() interface returns a copy of -** the pointer to the [database connection] (the 1st parameter) -** of the [sqlite3_create_function()] -** and [sqlite3_create_function16()] routines that originally -** registered the application defined function. -*/ -SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*); - -/* -** CAPI3REF: Function Auxiliary Data -** -** The following two functions may be used by scalar SQL functions to -** associate metadata with argument values. If the same value is passed to -** multiple invocations of the same SQL function during query execution, under -** some circumstances the associated metadata may be preserved. This may -** be used, for example, to add a regular-expression matching scalar -** function. The compiled version of the regular expression is stored as -** metadata associated with the SQL value passed as the regular expression -** pattern. The compiled regular expression can be reused on multiple -** invocations of the same function so that the original pattern string -** does not need to be recompiled on each invocation. -** -** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata -** associated by the sqlite3_set_auxdata() function with the Nth argument -** value to the application-defined function. ^If no metadata has been ever -** been set for the Nth argument of the function, or if the corresponding -** function parameter has changed since the meta-data was set, -** then sqlite3_get_auxdata() returns a NULL pointer. -** -** ^The sqlite3_set_auxdata() interface saves the metadata -** pointed to by its 3rd parameter as the metadata for the N-th -** argument of the application-defined function. Subsequent -** calls to sqlite3_get_auxdata() might return this data, if it has -** not been destroyed. -** ^If it is not NULL, SQLite will invoke the destructor -** function given by the 4th parameter to sqlite3_set_auxdata() on -** the metadata when the corresponding function parameter changes -** or when the SQL statement completes, whichever comes first. -** -** SQLite is free to call the destructor and drop metadata on any -** parameter of any function at any time. ^The only guarantee is that -** the destructor will be called before the metadata is dropped. -** -** ^(In practice, metadata is preserved between function calls for -** expressions that are constant at compile time. This includes literal -** values and [parameters].)^ -** -** These routines must be called from the same thread in which -** the SQL function is running. -*/ -SQLITE_API void *sqlite3_get_auxdata(sqlite3_context*, int N); -SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*)); - - -/* -** CAPI3REF: Constants Defining Special Destructor Behavior -** -** These are special values for the destructor that is passed in as the -** final argument to routines like [sqlite3_result_blob()]. ^If the destructor -** argument is SQLITE_STATIC, it means that the content pointer is constant -** and will never change. It does not need to be destroyed. ^The -** SQLITE_TRANSIENT value means that the content will likely change in -** the near future and that SQLite should make its own private copy of -** the content before returning. -** -** The typedef is necessary to work around problems in certain -** C++ compilers. See ticket #2191. -*/ -typedef void (*sqlite3_destructor_type)(void*); -#define SQLITE_STATIC ((sqlite3_destructor_type)0) -#define SQLITE_TRANSIENT ((sqlite3_destructor_type)-1) - -/* -** CAPI3REF: Setting The Result Of An SQL Function -** -** These routines are used by the xFunc or xFinal callbacks that -** implement SQL functions and aggregates. See -** [sqlite3_create_function()] and [sqlite3_create_function16()] -** for additional information. -** -** These functions work very much like the [parameter binding] family of -** functions used to bind values to host parameters in prepared statements. -** Refer to the [SQL parameter] documentation for additional information. -** -** ^The sqlite3_result_blob() interface sets the result from -** an application-defined function to be the BLOB whose content is pointed -** to by the second parameter and which is N bytes long where N is the -** third parameter. -** -** ^The sqlite3_result_zeroblob() interfaces set the result of -** the application-defined function to be a BLOB containing all zero -** bytes and N bytes in size, where N is the value of the 2nd parameter. -** -** ^The sqlite3_result_double() interface sets the result from -** an application-defined function to be a floating point value specified -** by its 2nd argument. -** -** ^The sqlite3_result_error() and sqlite3_result_error16() functions -** cause the implemented SQL function to throw an exception. -** ^SQLite uses the string pointed to by the -** 2nd parameter of sqlite3_result_error() or sqlite3_result_error16() -** as the text of an error message. ^SQLite interprets the error -** message string from sqlite3_result_error() as UTF-8. ^SQLite -** interprets the string from sqlite3_result_error16() as UTF-16 in native -** byte order. ^If the third parameter to sqlite3_result_error() -** or sqlite3_result_error16() is negative then SQLite takes as the error -** message all text up through the first zero character. -** ^If the third parameter to sqlite3_result_error() or -** sqlite3_result_error16() is non-negative then SQLite takes that many -** bytes (not characters) from the 2nd parameter as the error message. -** ^The sqlite3_result_error() and sqlite3_result_error16() -** routines make a private copy of the error message text before -** they return. Hence, the calling function can deallocate or -** modify the text after they return without harm. -** ^The sqlite3_result_error_code() function changes the error code -** returned by SQLite as a result of an error in a function. ^By default, -** the error code is SQLITE_ERROR. ^A subsequent call to sqlite3_result_error() -** or sqlite3_result_error16() resets the error code to SQLITE_ERROR. -** -** ^The sqlite3_result_toobig() interface causes SQLite to throw an error -** indicating that a string or BLOB is too long to represent. -** -** ^The sqlite3_result_nomem() interface causes SQLite to throw an error -** indicating that a memory allocation failed. -** -** ^The sqlite3_result_int() interface sets the return value -** of the application-defined function to be the 32-bit signed integer -** value given in the 2nd argument. -** ^The sqlite3_result_int64() interface sets the return value -** of the application-defined function to be the 64-bit signed integer -** value given in the 2nd argument. -** -** ^The sqlite3_result_null() interface sets the return value -** of the application-defined function to be NULL. -** -** ^The sqlite3_result_text(), sqlite3_result_text16(), -** sqlite3_result_text16le(), and sqlite3_result_text16be() interfaces -** set the return value of the application-defined function to be -** a text string which is represented as UTF-8, UTF-16 native byte order, -** UTF-16 little endian, or UTF-16 big endian, respectively. -** ^SQLite takes the text result from the application from -** the 2nd parameter of the sqlite3_result_text* interfaces. -** ^If the 3rd parameter to the sqlite3_result_text* interfaces -** is negative, then SQLite takes result text from the 2nd parameter -** through the first zero character. -** ^If the 3rd parameter to the sqlite3_result_text* interfaces -** is non-negative, then as many bytes (not characters) of the text -** pointed to by the 2nd parameter are taken as the application-defined -** function result. -** ^If the 4th parameter to the sqlite3_result_text* interfaces -** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that -** function as the destructor on the text or BLOB result when it has -** finished using that result. -** ^If the 4th parameter to the sqlite3_result_text* interfaces or to -** sqlite3_result_blob is the special constant SQLITE_STATIC, then SQLite -** assumes that the text or BLOB result is in constant space and does not -** copy the content of the parameter nor call a destructor on the content -** when it has finished using that result. -** ^If the 4th parameter to the sqlite3_result_text* interfaces -** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT -** then SQLite makes a copy of the result into space obtained from -** from [sqlite3_malloc()] before it returns. -** -** ^The sqlite3_result_value() interface sets the result of -** the application-defined function to be a copy the -** [unprotected sqlite3_value] object specified by the 2nd parameter. ^The -** sqlite3_result_value() interface makes a copy of the [sqlite3_value] -** so that the [sqlite3_value] specified in the parameter may change or -** be deallocated after sqlite3_result_value() returns without harm. -** ^A [protected sqlite3_value] object may always be used where an -** [unprotected sqlite3_value] object is required, so either -** kind of [sqlite3_value] object can be used with this interface. -** -** If these routines are called from within the different thread -** than the one containing the application-defined function that received -** the [sqlite3_context] pointer, the results are undefined. -*/ -SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*)); -SQLITE_API void sqlite3_result_double(sqlite3_context*, double); -SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int); -SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int); -SQLITE_API void sqlite3_result_error_toobig(sqlite3_context*); -SQLITE_API void sqlite3_result_error_nomem(sqlite3_context*); -SQLITE_API void sqlite3_result_error_code(sqlite3_context*, int); -SQLITE_API void sqlite3_result_int(sqlite3_context*, int); -SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64); -SQLITE_API void sqlite3_result_null(sqlite3_context*); -SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*)); -SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*)); -SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*)); -SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*)); -SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*); -SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n); - -/* -** CAPI3REF: Define New Collating Sequences -** -** These functions are used to add new collation sequences to the -** [database connection] specified as the first argument. -** -** ^The name of the new collation sequence is specified as a UTF-8 string -** for sqlite3_create_collation() and sqlite3_create_collation_v2() -** and a UTF-16 string for sqlite3_create_collation16(). ^In all cases -** the name is passed as the second function argument. -** -** ^The third argument may be one of the constants [SQLITE_UTF8], -** [SQLITE_UTF16LE], or [SQLITE_UTF16BE], indicating that the user-supplied -** routine expects to be passed pointers to strings encoded using UTF-8, -** UTF-16 little-endian, or UTF-16 big-endian, respectively. ^The -** third argument might also be [SQLITE_UTF16] to indicate that the routine -** expects pointers to be UTF-16 strings in the native byte order, or the -** argument can be [SQLITE_UTF16_ALIGNED] if the -** the routine expects pointers to 16-bit word aligned strings -** of UTF-16 in the native byte order. -** -** A pointer to the user supplied routine must be passed as the fifth -** argument. ^If it is NULL, this is the same as deleting the collation -** sequence (so that SQLite cannot call it anymore). -** ^Each time the application supplied function is invoked, it is passed -** as its first parameter a copy of the void* passed as the fourth argument -** to sqlite3_create_collation() or sqlite3_create_collation16(). -** -** ^The remaining arguments to the application-supplied routine are two strings, -** each represented by a (length, data) pair and encoded in the encoding -** that was passed as the third argument when the collation sequence was -** registered. The application defined collation routine should -** return negative, zero or positive if the first string is less than, -** equal to, or greater than the second string. i.e. (STRING1 - STRING2). -** -** ^The sqlite3_create_collation_v2() works like sqlite3_create_collation() -** except that it takes an extra argument which is a destructor for -** the collation. ^The destructor is called when the collation is -** destroyed and is passed a copy of the fourth parameter void* pointer -** of the sqlite3_create_collation_v2(). -** ^Collations are destroyed when they are overridden by later calls to the -** collation creation functions or when the [database connection] is closed -** using [sqlite3_close()]. -** -** See also: [sqlite3_collation_needed()] and [sqlite3_collation_needed16()]. -*/ -SQLITE_API int sqlite3_create_collation( - sqlite3*, - const char *zName, - int eTextRep, - void*, - int(*xCompare)(void*,int,const void*,int,const void*) -); -SQLITE_API int sqlite3_create_collation_v2( - sqlite3*, - const char *zName, - int eTextRep, - void*, - int(*xCompare)(void*,int,const void*,int,const void*), - void(*xDestroy)(void*) -); -SQLITE_API int sqlite3_create_collation16( - sqlite3*, - const void *zName, - int eTextRep, - void*, - int(*xCompare)(void*,int,const void*,int,const void*) -); - -/* -** CAPI3REF: Collation Needed Callbacks -** -** ^To avoid having to register all collation sequences before a database -** can be used, a single callback function may be registered with the -** [database connection] to be invoked whenever an undefined collation -** sequence is required. -** -** ^If the function is registered using the sqlite3_collation_needed() API, -** then it is passed the names of undefined collation sequences as strings -** encoded in UTF-8. ^If sqlite3_collation_needed16() is used, -** the names are passed as UTF-16 in machine native byte order. -** ^A call to either function replaces the existing collation-needed callback. -** -** ^(When the callback is invoked, the first argument passed is a copy -** of the second argument to sqlite3_collation_needed() or -** sqlite3_collation_needed16(). The second argument is the database -** connection. The third argument is one of [SQLITE_UTF8], [SQLITE_UTF16BE], -** or [SQLITE_UTF16LE], indicating the most desirable form of the collation -** sequence function required. The fourth parameter is the name of the -** required collation sequence.)^ -** -** The callback function should register the desired collation using -** [sqlite3_create_collation()], [sqlite3_create_collation16()], or -** [sqlite3_create_collation_v2()]. -*/ -SQLITE_API int sqlite3_collation_needed( - sqlite3*, - void*, - void(*)(void*,sqlite3*,int eTextRep,const char*) -); -SQLITE_API int sqlite3_collation_needed16( - sqlite3*, - void*, - void(*)(void*,sqlite3*,int eTextRep,const void*) -); - -#if SQLITE_HAS_CODEC -/* -** Specify the key for an encrypted database. This routine should be -** called right after sqlite3_open(). -** -** The code to implement this API is not available in the public release -** of SQLite. -*/ -SQLITE_API int sqlite3_key( - sqlite3 *db, /* Database to be rekeyed */ - const void *pKey, int nKey /* The key */ -); - -/* -** Change the key on an open database. If the current database is not -** encrypted, this routine will encrypt it. If pNew==0 or nNew==0, the -** database is decrypted. -** -** The code to implement this API is not available in the public release -** of SQLite. -*/ -SQLITE_API int sqlite3_rekey( - sqlite3 *db, /* Database to be rekeyed */ - const void *pKey, int nKey /* The new key */ -); - -/* -** Specify the activation key for a SEE database. Unless -** activated, none of the SEE routines will work. -*/ -SQLITE_API void sqlite3_activate_see( - const char *zPassPhrase /* Activation phrase */ -); -#endif - -#ifdef SQLITE_ENABLE_CEROD -/* -** Specify the activation key for a CEROD database. Unless -** activated, none of the CEROD routines will work. -*/ -SQLITE_API void sqlite3_activate_cerod( - const char *zPassPhrase /* Activation phrase */ -); -#endif - -/* -** CAPI3REF: Suspend Execution For A Short Time -** -** ^The sqlite3_sleep() function causes the current thread to suspend execution -** for at least a number of milliseconds specified in its parameter. -** -** ^If the operating system does not support sleep requests with -** millisecond time resolution, then the time will be rounded up to -** the nearest second. ^The number of milliseconds of sleep actually -** requested from the operating system is returned. -** -** ^SQLite implements this interface by calling the xSleep() -** method of the default [sqlite3_vfs] object. -*/ -SQLITE_API int sqlite3_sleep(int); - -/* -** CAPI3REF: Name Of The Folder Holding Temporary Files -** -** ^(If this global variable is made to point to a string which is -** the name of a folder (a.k.a. directory), then all temporary files -** created by SQLite when using a built-in [sqlite3_vfs | VFS] -** will be placed in that directory.)^ ^If this variable -** is a NULL pointer, then SQLite performs a search for an appropriate -** temporary file directory. -** -** It is not safe to read or modify this variable in more than one -** thread at a time. It is not safe to read or modify this variable -** if a [database connection] is being used at the same time in a separate -** thread. -** It is intended that this variable be set once -** as part of process initialization and before any SQLite interface -** routines have been called and that this variable remain unchanged -** thereafter. -** -** ^The [temp_store_directory pragma] may modify this variable and cause -** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore, -** the [temp_store_directory pragma] always assumes that any string -** that this variable points to is held in memory obtained from -** [sqlite3_malloc] and the pragma may attempt to free that memory -** using [sqlite3_free]. -** Hence, if this variable is modified directly, either it should be -** made NULL or made to point to memory obtained from [sqlite3_malloc] -** or else the use of the [temp_store_directory pragma] should be avoided. -*/ -SQLITE_API SQLITE_EXTERN char *sqlite3_temp_directory; - -/* -** CAPI3REF: Test For Auto-Commit Mode -** KEYWORDS: {autocommit mode} -** -** ^The sqlite3_get_autocommit() interface returns non-zero or -** zero if the given database connection is or is not in autocommit mode, -** respectively. ^Autocommit mode is on by default. -** ^Autocommit mode is disabled by a [BEGIN] statement. -** ^Autocommit mode is re-enabled by a [COMMIT] or [ROLLBACK]. -** -** If certain kinds of errors occur on a statement within a multi-statement -** transaction (errors including [SQLITE_FULL], [SQLITE_IOERR], -** [SQLITE_NOMEM], [SQLITE_BUSY], and [SQLITE_INTERRUPT]) then the -** transaction might be rolled back automatically. The only way to -** find out whether SQLite automatically rolled back the transaction after -** an error is to use this function. -** -** If another thread changes the autocommit status of the database -** connection while this routine is running, then the return value -** is undefined. -*/ -SQLITE_API int sqlite3_get_autocommit(sqlite3*); - -/* -** CAPI3REF: Find The Database Handle Of A Prepared Statement -** -** ^The sqlite3_db_handle interface returns the [database connection] handle -** to which a [prepared statement] belongs. ^The [database connection] -** returned by sqlite3_db_handle is the same [database connection] -** that was the first argument -** to the [sqlite3_prepare_v2()] call (or its variants) that was used to -** create the statement in the first place. -*/ -SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*); - -/* -** CAPI3REF: Find the next prepared statement -** -** ^This interface returns a pointer to the next [prepared statement] after -** pStmt associated with the [database connection] pDb. ^If pStmt is NULL -** then this interface returns a pointer to the first prepared statement -** associated with the database connection pDb. ^If no prepared statement -** satisfies the conditions of this routine, it returns NULL. -** -** The [database connection] pointer D in a call to -** [sqlite3_next_stmt(D,S)] must refer to an open database -** connection and in particular must not be a NULL pointer. -*/ -SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Commit And Rollback Notification Callbacks -** -** ^The sqlite3_commit_hook() interface registers a callback -** function to be invoked whenever a transaction is [COMMIT | committed]. -** ^Any callback set by a previous call to sqlite3_commit_hook() -** for the same database connection is overridden. -** ^The sqlite3_rollback_hook() interface registers a callback -** function to be invoked whenever a transaction is [ROLLBACK | rolled back]. -** ^Any callback set by a previous call to sqlite3_rollback_hook() -** for the same database connection is overridden. -** ^The pArg argument is passed through to the callback. -** ^If the callback on a commit hook function returns non-zero, -** then the commit is converted into a rollback. -** -** ^The sqlite3_commit_hook(D,C,P) and sqlite3_rollback_hook(D,C,P) functions -** return the P argument from the previous call of the same function -** on the same [database connection] D, or NULL for -** the first call for each function on D. -** -** The callback implementation must not do anything that will modify -** the database connection that invoked the callback. Any actions -** to modify the database connection must be deferred until after the -** completion of the [sqlite3_step()] call that triggered the commit -** or rollback hook in the first place. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -** ^Registering a NULL function disables the callback. -** -** ^When the commit hook callback routine returns zero, the [COMMIT] -** operation is allowed to continue normally. ^If the commit hook -** returns non-zero, then the [COMMIT] is converted into a [ROLLBACK]. -** ^The rollback hook is invoked on a rollback that results from a commit -** hook returning non-zero, just as it would be with any other rollback. -** -** ^For the purposes of this API, a transaction is said to have been -** rolled back if an explicit "ROLLBACK" statement is executed, or -** an error or constraint causes an implicit rollback to occur. -** ^The rollback callback is not invoked if a transaction is -** automatically rolled back because the database connection is closed. -** ^The rollback callback is not invoked if a transaction is -** rolled back because a commit callback returned non-zero. -** -** See also the [sqlite3_update_hook()] interface. -*/ -SQLITE_API void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*); -SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*); - -/* -** CAPI3REF: Data Change Notification Callbacks -** -** ^The sqlite3_update_hook() interface registers a callback function -** with the [database connection] identified by the first argument -** to be invoked whenever a row is updated, inserted or deleted. -** ^Any callback set by a previous call to this function -** for the same database connection is overridden. -** -** ^The second argument is a pointer to the function to invoke when a -** row is updated, inserted or deleted. -** ^The first argument to the callback is a copy of the third argument -** to sqlite3_update_hook(). -** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE], -** or [SQLITE_UPDATE], depending on the operation that caused the callback -** to be invoked. -** ^The third and fourth arguments to the callback contain pointers to the -** database and table name containing the affected row. -** ^The final callback parameter is the [rowid] of the row. -** ^In the case of an update, this is the [rowid] after the update takes place. -** -** ^(The update hook is not invoked when internal system tables are -** modified (i.e. sqlite_master and sqlite_sequence).)^ -** -** ^In the current implementation, the update hook -** is not invoked when duplication rows are deleted because of an -** [ON CONFLICT | ON CONFLICT REPLACE] clause. ^Nor is the update hook -** invoked when rows are deleted using the [truncate optimization]. -** The exceptions defined in this paragraph might change in a future -** release of SQLite. -** -** The update hook implementation must not do anything that will modify -** the database connection that invoked the update hook. Any actions -** to modify the database connection must be deferred until after the -** completion of the [sqlite3_step()] call that triggered the update hook. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -** ^The sqlite3_update_hook(D,C,P) function -** returns the P argument from the previous call -** on the same [database connection] D, or NULL for -** the first call on D. -** -** See also the [sqlite3_commit_hook()] and [sqlite3_rollback_hook()] -** interfaces. -*/ -SQLITE_API void *sqlite3_update_hook( - sqlite3*, - void(*)(void *,int ,char const *,char const *,sqlite3_int64), - void* -); - -/* -** CAPI3REF: Enable Or Disable Shared Pager Cache -** KEYWORDS: {shared cache} -** -** ^(This routine enables or disables the sharing of the database cache -** and schema data structures between [database connection | connections] -** to the same database. Sharing is enabled if the argument is true -** and disabled if the argument is false.)^ -** -** ^Cache sharing is enabled and disabled for an entire process. -** This is a change as of SQLite version 3.5.0. In prior versions of SQLite, -** sharing was enabled or disabled for each thread separately. -** -** ^(The cache sharing mode set by this interface effects all subsequent -** calls to [sqlite3_open()], [sqlite3_open_v2()], and [sqlite3_open16()]. -** Existing database connections continue use the sharing mode -** that was in effect at the time they were opened.)^ -** -** ^(This routine returns [SQLITE_OK] if shared cache was enabled or disabled -** successfully. An [error code] is returned otherwise.)^ -** -** ^Shared cache is disabled by default. But this might change in -** future releases of SQLite. Applications that care about shared -** cache setting should set it explicitly. -** -** See Also: [SQLite Shared-Cache Mode] -*/ -SQLITE_API int sqlite3_enable_shared_cache(int); - -/* -** CAPI3REF: Attempt To Free Heap Memory -** -** ^The sqlite3_release_memory() interface attempts to free N bytes -** of heap memory by deallocating non-essential memory allocations -** held by the database library. Memory used to cache database -** pages to improve performance is an example of non-essential memory. -** ^sqlite3_release_memory() returns the number of bytes actually freed, -** which might be more or less than the amount requested. -*/ -SQLITE_API int sqlite3_release_memory(int); - -/* -** CAPI3REF: Impose A Limit On Heap Size -** -** ^The sqlite3_soft_heap_limit() interface places a "soft" limit -** on the amount of heap memory that may be allocated by SQLite. -** ^If an internal allocation is requested that would exceed the -** soft heap limit, [sqlite3_release_memory()] is invoked one or -** more times to free up some space before the allocation is performed. -** -** ^The limit is called "soft" because if [sqlite3_release_memory()] -** cannot free sufficient memory to prevent the limit from being exceeded, -** the memory is allocated anyway and the current operation proceeds. -** -** ^A negative or zero value for N means that there is no soft heap limit and -** [sqlite3_release_memory()] will only be called when memory is exhausted. -** ^The default value for the soft heap limit is zero. -** -** ^(SQLite makes a best effort to honor the soft heap limit. -** But if the soft heap limit cannot be honored, execution will -** continue without error or notification.)^ This is why the limit is -** called a "soft" limit. It is advisory only. -** -** Prior to SQLite version 3.5.0, this routine only constrained the memory -** allocated by a single thread - the same thread in which this routine -** runs. Beginning with SQLite version 3.5.0, the soft heap limit is -** applied to all threads. The value specified for the soft heap limit -** is an upper bound on the total memory allocation for all threads. In -** version 3.5.0 there is no mechanism for limiting the heap usage for -** individual threads. -*/ -SQLITE_API void sqlite3_soft_heap_limit(int); - -/* -** CAPI3REF: Extract Metadata About A Column Of A Table -** -** ^This routine returns metadata about a specific column of a specific -** database table accessible using the [database connection] handle -** passed as the first function argument. -** -** ^The column is identified by the second, third and fourth parameters to -** this function. ^The second parameter is either the name of the database -** (i.e. "main", "temp", or an attached database) containing the specified -** table or NULL. ^If it is NULL, then all attached databases are searched -** for the table using the same algorithm used by the database engine to -** resolve unqualified table references. -** -** ^The third and fourth parameters to this function are the table and column -** name of the desired column, respectively. Neither of these parameters -** may be NULL. -** -** ^Metadata is returned by writing to the memory locations passed as the 5th -** and subsequent parameters to this function. ^Any of these arguments may be -** NULL, in which case the corresponding element of metadata is omitted. -** -** ^(
-** -**
Parameter Output
Type 		Description -** -**
5th const char* Data type -**
6th const char* Name of default collation sequence -**
7th int True if column has a NOT NULL constraint -**
8th int True if column is part of the PRIMARY KEY -**
9th int True if column is [AUTOINCREMENT] -**
-**
)^ -** -** ^The memory pointed to by the character pointers returned for the -** declaration type and collation sequence is valid only until the next -** call to any SQLite API function. -** -** ^If the specified table is actually a view, an [error code] is returned. -** -** ^If the specified column is "rowid", "oid" or "_rowid_" and an -** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output -** parameters are set for the explicitly declared column. ^(If there is no -** explicitly declared [INTEGER PRIMARY KEY] column, then the output -** parameters are set as follows: -** -** 
-**     data type: "INTEGER"
-**     collation sequence: "BINARY"
-**     not null: 0
-**     primary key: 1
-**     auto increment: 0
-**
)^ -** -** ^(This function may load one or more schemas from database files. If an -** error occurs during this process, or if the requested table or column -** cannot be found, an [error code] is returned and an error message left -** in the [database connection] (to be retrieved using sqlite3_errmsg()).)^ -** -** ^This API is only available if the library was compiled with the -** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol defined. -*/ -SQLITE_API int sqlite3_table_column_metadata( - sqlite3 *db, /* Connection handle */ - const char *zDbName, /* Database name or NULL */ - const char *zTableName, /* Table name */ - const char *zColumnName, /* Column name */ - char const **pzDataType, /* OUTPUT: Declared data type */ - char const **pzCollSeq, /* OUTPUT: Collation sequence name */ - int *pNotNull, /* OUTPUT: True if NOT NULL constraint exists */ - int *pPrimaryKey, /* OUTPUT: True if column part of PK */ - int *pAutoinc /* OUTPUT: True if column is auto-increment */ -); - -/* -** CAPI3REF: Load An Extension -** -** ^This interface loads an SQLite extension library from the named file. -** -** ^The sqlite3_load_extension() interface attempts to load an -** SQLite extension library contained in the file zFile. -** -** ^The entry point is zProc. -** ^zProc may be 0, in which case the name of the entry point -** defaults to "sqlite3_extension_init". -** ^The sqlite3_load_extension() interface returns -** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong. -** ^If an error occurs and pzErrMsg is not 0, then the -** [sqlite3_load_extension()] interface shall attempt to -** fill *pzErrMsg with error message text stored in memory -** obtained from [sqlite3_malloc()]. The calling function -** should free this memory by calling [sqlite3_free()]. -** -** ^Extension loading must be enabled using -** [sqlite3_enable_load_extension()] prior to calling this API, -** otherwise an error will be returned. -** -** See also the [load_extension() SQL function]. -*/ -SQLITE_API int sqlite3_load_extension( - sqlite3 *db, /* Load the extension into this database connection */ - const char *zFile, /* Name of the shared library containing extension */ - const char *zProc, /* Entry point. Derived from zFile if 0 */ - char **pzErrMsg /* Put error message here if not 0 */ -); - -/* -** CAPI3REF: Enable Or Disable Extension Loading -** -** ^So as not to open security holes in older applications that are -** unprepared to deal with extension loading, and as a means of disabling -** extension loading while evaluating user-entered SQL, the following API -** is provided to turn the [sqlite3_load_extension()] mechanism on and off. -** -** ^Extension loading is off by default. See ticket #1863. -** ^Call the sqlite3_enable_load_extension() routine with onoff==1 -** to turn extension loading on and call it with onoff==0 to turn -** it back off again. -*/ -SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff); - -/* -** CAPI3REF: Automatically Load An Extensions -** -** ^This API can be invoked at program startup in order to register -** one or more statically linked extensions that will be available -** to all new [database connections]. -** -** ^(This routine stores a pointer to the extension entry point -** in an array that is obtained from [sqlite3_malloc()]. That memory -** is deallocated by [sqlite3_reset_auto_extension()].)^ -** -** ^This function registers an extension entry point that is -** automatically invoked whenever a new [database connection] -** is opened using [sqlite3_open()], [sqlite3_open16()], -** or [sqlite3_open_v2()]. -** ^Duplicate extensions are detected so calling this routine -** multiple times with the same extension is harmless. -** ^Automatic extensions apply across all threads. -*/ -SQLITE_API int sqlite3_auto_extension(void (*xEntryPoint)(void)); - -/* -** CAPI3REF: Reset Automatic Extension Loading -** -** ^(This function disables all previously registered automatic -** extensions. It undoes the effect of all prior -** [sqlite3_auto_extension()] calls.)^ -** -** ^This function disables automatic extensions in all threads. -*/ -SQLITE_API void sqlite3_reset_auto_extension(void); - -/* -****** EXPERIMENTAL - subject to change without notice ************** -** -** The interface to the virtual-table mechanism is currently considered -** to be experimental. The interface might change in incompatible ways. -** If this is a problem for you, do not use the interface at this time. -** -** When the virtual-table mechanism stabilizes, we will declare the -** interface fixed, support it indefinitely, and remove this comment. -*/ - -/* -** Structures used by the virtual table interface -*/ -typedef struct sqlite3_vtab sqlite3_vtab; -typedef struct sqlite3_index_info sqlite3_index_info; -typedef struct sqlite3_vtab_cursor sqlite3_vtab_cursor; -typedef struct sqlite3_module sqlite3_module; - -/* -** CAPI3REF: Virtual Table Object -** KEYWORDS: sqlite3_module {virtual table module} -** EXPERIMENTAL -** -** This structure, sometimes called a a "virtual table module", -** defines the implementation of a [virtual tables]. -** This structure consists mostly of methods for the module. -** -** ^A virtual table module is created by filling in a persistent -** instance of this structure and passing a pointer to that instance -** to [sqlite3_create_module()] or [sqlite3_create_module_v2()]. -** ^The registration remains valid until it is replaced by a different -** module or until the [database connection] closes. The content -** of this structure must not change while it is registered with -** any database connection. -*/ -struct sqlite3_module { - int iVersion; - int (*xCreate)(sqlite3*, void *pAux, - int argc, const char *const*argv, - sqlite3_vtab **ppVTab, char**); - int (*xConnect)(sqlite3*, void *pAux, - int argc, const char *const*argv, - sqlite3_vtab **ppVTab, char**); - int (*xBestIndex)(sqlite3_vtab *pVTab, sqlite3_index_info*); - int (*xDisconnect)(sqlite3_vtab *pVTab); - int (*xDestroy)(sqlite3_vtab *pVTab); - int (*xOpen)(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor); - int (*xClose)(sqlite3_vtab_cursor*); - int (*xFilter)(sqlite3_vtab_cursor*, int idxNum, const char *idxStr, - int argc, sqlite3_value **argv); - int (*xNext)(sqlite3_vtab_cursor*); - int (*xEof)(sqlite3_vtab_cursor*); - int (*xColumn)(sqlite3_vtab_cursor*, sqlite3_context*, int); - int (*xRowid)(sqlite3_vtab_cursor*, sqlite3_int64 *pRowid); - int (*xUpdate)(sqlite3_vtab *, int, sqlite3_value **, sqlite3_int64 *); - int (*xBegin)(sqlite3_vtab *pVTab); - int (*xSync)(sqlite3_vtab *pVTab); - int (*xCommit)(sqlite3_vtab *pVTab); - int (*xRollback)(sqlite3_vtab *pVTab); - int (*xFindFunction)(sqlite3_vtab *pVtab, int nArg, const char *zName, - void (**pxFunc)(sqlite3_context*,int,sqlite3_value**), - void **ppArg); - int (*xRename)(sqlite3_vtab *pVtab, const char *zNew); -}; - -/* -** CAPI3REF: Virtual Table Indexing Information -** KEYWORDS: sqlite3_index_info -** EXPERIMENTAL -** -** The sqlite3_index_info structure and its substructures is used to -** pass information into and receive the reply from the [xBestIndex] -** method of a [virtual table module]. The fields under **Inputs** are the -** inputs to xBestIndex and are read-only. xBestIndex inserts its -** results into the **Outputs** fields. -** -** ^(The aConstraint[] array records WHERE clause constraints of the form: -** -** 
column OP expr
-** -** where OP is =, <, <=, >, or >=.)^ ^(The particular operator is -** stored in aConstraint[].op.)^ ^(The index of the column is stored in -** aConstraint[].iColumn.)^ ^(aConstraint[].usable is TRUE if the -** expr on the right-hand side can be evaluated (and thus the constraint -** is usable) and false if it cannot.)^ -** -** ^The optimizer automatically inverts terms of the form "expr OP column" -** and makes other simplifications to the WHERE clause in an attempt to -** get as many WHERE clause terms into the form shown above as possible. -** ^The aConstraint[] array only reports WHERE clause terms that are -** relevant to the particular virtual table being queried. -** -** ^Information about the ORDER BY clause is stored in aOrderBy[]. -** ^Each term of aOrderBy records a column of the ORDER BY clause. -** -** The [xBestIndex] method must fill aConstraintUsage[] with information -** about what parameters to pass to xFilter. ^If argvIndex>0 then -** the right-hand side of the corresponding aConstraint[] is evaluated -** and becomes the argvIndex-th entry in argv. ^(If aConstraintUsage[].omit -** is true, then the constraint is assumed to be fully handled by the -** virtual table and is not checked again by SQLite.)^ -** -** ^The idxNum and idxPtr values are recorded and passed into the -** [xFilter] method. -** ^[sqlite3_free()] is used to free idxPtr if and only if -** needToFreeIdxPtr is true. -** -** ^The orderByConsumed means that output from [xFilter]/[xNext] will occur in -** the correct order to satisfy the ORDER BY clause so that no separate -** sorting step is required. -** -** ^The estimatedCost value is an estimate of the cost of doing the -** particular lookup. A full scan of a table with N entries should have -** a cost of N. A binary search of a table of N entries should have a -** cost of approximately log(N). -*/ -struct sqlite3_index_info { - /* Inputs */ - int nConstraint; /* Number of entries in aConstraint */ - struct sqlite3_index_constraint { - int iColumn; /* Column on left-hand side of constraint */ - unsigned char op; /* Constraint operator */ - unsigned char usable; /* True if this constraint is usable */ - int iTermOffset; /* Used internally - xBestIndex should ignore */ - } *aConstraint; /* Table of WHERE clause constraints */ - int nOrderBy; /* Number of terms in the ORDER BY clause */ - struct sqlite3_index_orderby { - int iColumn; /* Column number */ - unsigned char desc; /* True for DESC. False for ASC. */ - } *aOrderBy; /* The ORDER BY clause */ - /* Outputs */ - struct sqlite3_index_constraint_usage { - int argvIndex; /* if >0, constraint is part of argv to xFilter */ - unsigned char omit; /* Do not code a test for this constraint */ - } *aConstraintUsage; - int idxNum; /* Number used to identify the index */ - char *idxStr; /* String, possibly obtained from sqlite3_malloc */ - int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */ - int orderByConsumed; /* True if output is already ordered */ - double estimatedCost; /* Estimated cost of using this index */ -}; -#define SQLITE_INDEX_CONSTRAINT_EQ 2 -#define SQLITE_INDEX_CONSTRAINT_GT 4 -#define SQLITE_INDEX_CONSTRAINT_LE 8 -#define SQLITE_INDEX_CONSTRAINT_LT 16 -#define SQLITE_INDEX_CONSTRAINT_GE 32 -#define SQLITE_INDEX_CONSTRAINT_MATCH 64 - -/* -** CAPI3REF: Register A Virtual Table Implementation -** EXPERIMENTAL -** -** ^These routines are used to register a new [virtual table module] name. -** ^Module names must be registered before -** creating a new [virtual table] using the module and before using a -** preexisting [virtual table] for the module. -** -** ^The module name is registered on the [database connection] specified -** by the first parameter. ^The name of the module is given by the -** second parameter. ^The third parameter is a pointer to -** the implementation of the [virtual table module]. ^The fourth -** parameter is an arbitrary client data pointer that is passed through -** into the [xCreate] and [xConnect] methods of the virtual table module -** when a new virtual table is be being created or reinitialized. -** -** ^The sqlite3_create_module_v2() interface has a fifth parameter which -** is a pointer to a destructor for the pClientData. ^SQLite will -** invoke the destructor function (if it is not NULL) when SQLite -** no longer needs the pClientData pointer. ^The sqlite3_create_module() -** interface is equivalent to sqlite3_create_module_v2() with a NULL -** destructor. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_create_module( - sqlite3 *db, /* SQLite connection to register module with */ - const char *zName, /* Name of the module */ - const sqlite3_module *p, /* Methods for the module */ - void *pClientData /* Client data for xCreate/xConnect */ -); -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_create_module_v2( - sqlite3 *db, /* SQLite connection to register module with */ - const char *zName, /* Name of the module */ - const sqlite3_module *p, /* Methods for the module */ - void *pClientData, /* Client data for xCreate/xConnect */ - void(*xDestroy)(void*) /* Module destructor function */ -); - -/* -** CAPI3REF: Virtual Table Instance Object -** KEYWORDS: sqlite3_vtab -** EXPERIMENTAL -** -** Every [virtual table module] implementation uses a subclass -** of this object to describe a particular instance -** of the [virtual table]. Each subclass will -** be tailored to the specific needs of the module implementation. -** The purpose of this superclass is to define certain fields that are -** common to all module implementations. -** -** ^Virtual tables methods can set an error message by assigning a -** string obtained from [sqlite3_mprintf()] to zErrMsg. The method should -** take care that any prior string is freed by a call to [sqlite3_free()] -** prior to assigning a new string to zErrMsg. ^After the error message -** is delivered up to the client application, the string will be automatically -** freed by sqlite3_free() and the zErrMsg field will be zeroed. -*/ -struct sqlite3_vtab { - const sqlite3_module *pModule; /* The module for this virtual table */ - int nRef; /* NO LONGER USED */ - char *zErrMsg; /* Error message from sqlite3_mprintf() */ - /* Virtual table implementations will typically add additional fields */ -}; - -/* -** CAPI3REF: Virtual Table Cursor Object -** KEYWORDS: sqlite3_vtab_cursor {virtual table cursor} -** EXPERIMENTAL -** -** Every [virtual table module] implementation uses a subclass of the -** following structure to describe cursors that point into the -** [virtual table] and are used -** to loop through the virtual table. Cursors are created using the -** [sqlite3_module.xOpen | xOpen] method of the module and are destroyed -** by the [sqlite3_module.xClose | xClose] method. Cursors are used -** by the [xFilter], [xNext], [xEof], [xColumn], and [xRowid] methods -** of the module. Each module implementation will define -** the content of a cursor structure to suit its own needs. -** -** This superclass exists in order to define fields of the cursor that -** are common to all implementations. -*/ -struct sqlite3_vtab_cursor { - sqlite3_vtab *pVtab; /* Virtual table of this cursor */ - /* Virtual table implementations will typically add additional fields */ -}; - -/* -** CAPI3REF: Declare The Schema Of A Virtual Table -** EXPERIMENTAL -** -** ^The [xCreate] and [xConnect] methods of a -** [virtual table module] call this interface -** to declare the format (the names and datatypes of the columns) of -** the virtual tables they implement. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_declare_vtab(sqlite3*, const char *zSQL); - -/* -** CAPI3REF: Overload A Function For A Virtual Table -** EXPERIMENTAL -** -** ^(Virtual tables can provide alternative implementations of functions -** using the [xFindFunction] method of the [virtual table module]. -** But global versions of those functions -** must exist in order to be overloaded.)^ -** -** ^(This API makes sure a global version of a function with a particular -** name and number of parameters exists. If no such function exists -** before this API is called, a new function is created.)^ ^The implementation -** of the new function always causes an exception to be thrown. So -** the new function is not good for anything by itself. Its only -** purpose is to be a placeholder function that can be overloaded -** by a [virtual table]. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg); - -/* -** The interface to the virtual-table mechanism defined above (back up -** to a comment remarkably similar to this one) is currently considered -** to be experimental. The interface might change in incompatible ways. -** If this is a problem for you, do not use the interface at this time. -** -** When the virtual-table mechanism stabilizes, we will declare the -** interface fixed, support it indefinitely, and remove this comment. -** -****** EXPERIMENTAL - subject to change without notice ************** -*/ - -/* -** CAPI3REF: A Handle To An Open BLOB -** KEYWORDS: {BLOB handle} {BLOB handles} -** -** An instance of this object represents an open BLOB on which -** [sqlite3_blob_open | incremental BLOB I/O] can be performed. -** ^Objects of this type are created by [sqlite3_blob_open()] -** and destroyed by [sqlite3_blob_close()]. -** ^The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces -** can be used to read or write small subsections of the BLOB. -** ^The [sqlite3_blob_bytes()] interface returns the size of the BLOB in bytes. -*/ -typedef struct sqlite3_blob sqlite3_blob; - -/* -** CAPI3REF: Open A BLOB For Incremental I/O -** -** ^(This interfaces opens a [BLOB handle | handle] to the BLOB located -** in row iRow, column zColumn, table zTable in database zDb; -** in other words, the same BLOB that would be selected by: -** -** 
-**     SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow;
-**
)^ -** -** ^If the flags parameter is non-zero, then the BLOB is opened for read -** and write access. ^If it is zero, the BLOB is opened for read access. -** ^It is not possible to open a column that is part of an index or primary -** key for writing. ^If [foreign key constraints] are enabled, it is -** not possible to open a column that is part of a [child key] for writing. -** -** ^Note that the database name is not the filename that contains -** the database but rather the symbolic name of the database that -** appears after the AS keyword when the database is connected using [ATTACH]. -** ^For the main database file, the database name is "main". -** ^For TEMP tables, the database name is "temp". -** -** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is written -** to *ppBlob. Otherwise an [error code] is returned and *ppBlob is set -** to be a null pointer.)^ -** ^This function sets the [database connection] error code and message -** accessible via [sqlite3_errcode()] and [sqlite3_errmsg()] and related -** functions. ^Note that the *ppBlob variable is always initialized in a -** way that makes it safe to invoke [sqlite3_blob_close()] on *ppBlob -** regardless of the success or failure of this routine. -** -** ^(If the row that a BLOB handle points to is modified by an -** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects -** then the BLOB handle is marked as "expired". -** This is true if any column of the row is changed, even a column -** other than the one the BLOB handle is open on.)^ -** ^Calls to [sqlite3_blob_read()] and [sqlite3_blob_write()] for -** a expired BLOB handle fail with an return code of [SQLITE_ABORT]. -** ^(Changes written into a BLOB prior to the BLOB expiring are not -** rolled back by the expiration of the BLOB. Such changes will eventually -** commit if the transaction continues to completion.)^ -** -** ^Use the [sqlite3_blob_bytes()] interface to determine the size of -** the opened blob. ^The size of a blob may not be changed by this -** interface. Use the [UPDATE] SQL command to change the size of a -** blob. -** -** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces -** and the built-in [zeroblob] SQL function can be used, if desired, -** to create an empty, zero-filled blob in which to read or write using -** this interface. -** -** To avoid a resource leak, every open [BLOB handle] should eventually -** be released by a call to [sqlite3_blob_close()]. -*/ -SQLITE_API int sqlite3_blob_open( - sqlite3*, - const char *zDb, - const char *zTable, - const char *zColumn, - sqlite3_int64 iRow, - int flags, - sqlite3_blob **ppBlob -); - -/* -** CAPI3REF: Close A BLOB Handle -** -** ^Closes an open [BLOB handle]. -** -** ^Closing a BLOB shall cause the current transaction to commit -** if there are no other BLOBs, no pending prepared statements, and the -** database connection is in [autocommit mode]. -** ^If any writes were made to the BLOB, they might be held in cache -** until the close operation if they will fit. -** -** ^(Closing the BLOB often forces the changes -** out to disk and so if any I/O errors occur, they will likely occur -** at the time when the BLOB is closed. Any errors that occur during -** closing are reported as a non-zero return value.)^ -** -** ^(The BLOB is closed unconditionally. Even if this routine returns -** an error code, the BLOB is still closed.)^ -** -** ^Calling this routine with a null pointer (such as would be returned -** by a failed call to [sqlite3_blob_open()]) is a harmless no-op. -*/ -SQLITE_API int sqlite3_blob_close(sqlite3_blob *); - -/* -** CAPI3REF: Return The Size Of An Open BLOB -** -** ^Returns the size in bytes of the BLOB accessible via the -** successfully opened [BLOB handle] in its only argument. ^The -** incremental blob I/O routines can only read or overwriting existing -** blob content; they cannot change the size of a blob. -** -** This routine only works on a [BLOB handle] which has been created -** by a prior successful call to [sqlite3_blob_open()] and which has not -** been closed by [sqlite3_blob_close()]. Passing any other pointer in -** to this routine results in undefined and probably undesirable behavior. -*/ -SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *); - -/* -** CAPI3REF: Read Data From A BLOB Incrementally -** -** ^(This function is used to read data from an open [BLOB handle] into a -** caller-supplied buffer. N bytes of data are copied into buffer Z -** from the open BLOB, starting at offset iOffset.)^ -** -** ^If offset iOffset is less than N bytes from the end of the BLOB, -** [SQLITE_ERROR] is returned and no data is read. ^If N or iOffset is -** less than zero, [SQLITE_ERROR] is returned and no data is read. -** ^The size of the blob (and hence the maximum value of N+iOffset) -** can be determined using the [sqlite3_blob_bytes()] interface. -** -** ^An attempt to read from an expired [BLOB handle] fails with an -** error code of [SQLITE_ABORT]. -** -** ^(On success, sqlite3_blob_read() returns SQLITE_OK. -** Otherwise, an [error code] or an [extended error code] is returned.)^ -** -** This routine only works on a [BLOB handle] which has been created -** by a prior successful call to [sqlite3_blob_open()] and which has not -** been closed by [sqlite3_blob_close()]. Passing any other pointer in -** to this routine results in undefined and probably undesirable behavior. -** -** See also: [sqlite3_blob_write()]. -*/ -SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset); - -/* -** CAPI3REF: Write Data Into A BLOB Incrementally -** -** ^This function is used to write data into an open [BLOB handle] from a -** caller-supplied buffer. ^N bytes of data are copied from the buffer Z -** into the open BLOB, starting at offset iOffset. -** -** ^If the [BLOB handle] passed as the first argument was not opened for -** writing (the flags parameter to [sqlite3_blob_open()] was zero), -** this function returns [SQLITE_READONLY]. -** -** ^This function may only modify the contents of the BLOB; it is -** not possible to increase the size of a BLOB using this API. -** ^If offset iOffset is less than N bytes from the end of the BLOB, -** [SQLITE_ERROR] is returned and no data is written. ^If N is -** less than zero [SQLITE_ERROR] is returned and no data is written. -** The size of the BLOB (and hence the maximum value of N+iOffset) -** can be determined using the [sqlite3_blob_bytes()] interface. -** -** ^An attempt to write to an expired [BLOB handle] fails with an -** error code of [SQLITE_ABORT]. ^Writes to the BLOB that occurred -** before the [BLOB handle] expired are not rolled back by the -** expiration of the handle, though of course those changes might -** have been overwritten by the statement that expired the BLOB handle -** or by other independent statements. -** -** ^(On success, sqlite3_blob_write() returns SQLITE_OK. -** Otherwise, an [error code] or an [extended error code] is returned.)^ -** -** This routine only works on a [BLOB handle] which has been created -** by a prior successful call to [sqlite3_blob_open()] and which has not -** been closed by [sqlite3_blob_close()]. Passing any other pointer in -** to this routine results in undefined and probably undesirable behavior. -** -** See also: [sqlite3_blob_read()]. -*/ -SQLITE_API int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset); - -/* -** CAPI3REF: Virtual File System Objects -** -** A virtual filesystem (VFS) is an [sqlite3_vfs] object -** that SQLite uses to interact -** with the underlying operating system. Most SQLite builds come with a -** single default VFS that is appropriate for the host computer. -** New VFSes can be registered and existing VFSes can be unregistered. -** The following interfaces are provided. -** -** ^The sqlite3_vfs_find() interface returns a pointer to a VFS given its name. -** ^Names are case sensitive. -** ^Names are zero-terminated UTF-8 strings. -** ^If there is no match, a NULL pointer is returned. -** ^If zVfsName is NULL then the default VFS is returned. -** -** ^New VFSes are registered with sqlite3_vfs_register(). -** ^Each new VFS becomes the default VFS if the makeDflt flag is set. -** ^The same VFS can be registered multiple times without injury. -** ^To make an existing VFS into the default VFS, register it again -** with the makeDflt flag set. If two different VFSes with the -** same name are registered, the behavior is undefined. If a -** VFS is registered with a name that is NULL or an empty string, -** then the behavior is undefined. -** -** ^Unregister a VFS with the sqlite3_vfs_unregister() interface. -** ^(If the default VFS is unregistered, another VFS is chosen as -** the default. The choice for the new VFS is arbitrary.)^ -*/ -SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName); -SQLITE_API int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt); -SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*); - -/* -** CAPI3REF: Mutexes -** -** The SQLite core uses these routines for thread -** synchronization. Though they are intended for internal -** use by SQLite, code that links against SQLite is -** permitted to use any of these routines. -** -** The SQLite source code contains multiple implementations -** of these mutex routines. An appropriate implementation -** is selected automatically at compile-time. ^(The following -** implementations are available in the SQLite core: -** -** )^ -** -** ^The SQLITE_MUTEX_NOOP implementation is a set of routines -** that does no real locking and is appropriate for use in -** a single-threaded application. ^The SQLITE_MUTEX_OS2, -** SQLITE_MUTEX_PTHREAD, and SQLITE_MUTEX_W32 implementations -** are appropriate for use on OS/2, Unix, and Windows. -** -** ^(If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor -** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex -** implementation is included with the library. In this case the -** application must supply a custom mutex implementation using the -** [SQLITE_CONFIG_MUTEX] option of the sqlite3_config() function -** before calling sqlite3_initialize() or any other public sqlite3_ -** function that calls sqlite3_initialize().)^ -** -** ^The sqlite3_mutex_alloc() routine allocates a new -** mutex and returns a pointer to it. ^If it returns NULL -** that means that a mutex could not be allocated. ^SQLite -** will unwind its stack and return an error. ^(The argument -** to sqlite3_mutex_alloc() is one of these integer constants: -** -** )^ -** -** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) -** cause sqlite3_mutex_alloc() to create -** a new mutex. ^The new mutex is recursive when SQLITE_MUTEX_RECURSIVE -** is used but not necessarily so when SQLITE_MUTEX_FAST is used. -** The mutex implementation does not need to make a distinction -** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does -** not want to. ^SQLite will only request a recursive mutex in -** cases where it really needs one. ^If a faster non-recursive mutex -** implementation is available on the host platform, the mutex subsystem -** might return such a mutex in response to SQLITE_MUTEX_FAST. -** -** ^The other allowed parameters to sqlite3_mutex_alloc() (anything other -** than SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) each return -** a pointer to a static preexisting mutex. ^Six static mutexes are -** used by the current version of SQLite. Future versions of SQLite -** may add additional static mutexes. Static mutexes are for internal -** use by SQLite only. Applications that use SQLite mutexes should -** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or -** SQLITE_MUTEX_RECURSIVE. -** -** ^Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST -** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc() -** returns a different mutex on every call. ^But for the static -** mutex types, the same mutex is returned on every call that has -** the same type number. -** -** ^The sqlite3_mutex_free() routine deallocates a previously -** allocated dynamic mutex. ^SQLite is careful to deallocate every -** dynamic mutex that it allocates. The dynamic mutexes must not be in -** use when they are deallocated. Attempting to deallocate a static -** mutex results in undefined behavior. ^SQLite never deallocates -** a static mutex. -** -** ^The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt -** to enter a mutex. ^If another thread is already within the mutex, -** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return -** SQLITE_BUSY. ^The sqlite3_mutex_try() interface returns [SQLITE_OK] -** upon successful entry. ^(Mutexes created using -** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread. -** In such cases the, -** mutex must be exited an equal number of times before another thread -** can enter.)^ ^(If the same thread tries to enter any other -** kind of mutex more than once, the behavior is undefined. -** SQLite will never exhibit -** such behavior in its own use of mutexes.)^ -** -** ^(Some systems (for example, Windows 95) do not support the operation -** implemented by sqlite3_mutex_try(). On those systems, sqlite3_mutex_try() -** will always return SQLITE_BUSY. The SQLite core only ever uses -** sqlite3_mutex_try() as an optimization so this is acceptable behavior.)^ -** -** ^The sqlite3_mutex_leave() routine exits a mutex that was -** previously entered by the same thread. ^(The behavior -** is undefined if the mutex is not currently entered by the -** calling thread or is not currently allocated. SQLite will -** never do either.)^ -** -** ^If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or -** sqlite3_mutex_leave() is a NULL pointer, then all three routines -** behave as no-ops. -** -** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()]. -*/ -SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int); -SQLITE_API void sqlite3_mutex_free(sqlite3_mutex*); -SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex*); -SQLITE_API int sqlite3_mutex_try(sqlite3_mutex*); -SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*); - -/* -** CAPI3REF: Mutex Methods Object -** EXPERIMENTAL -** -** An instance of this structure defines the low-level routines -** used to allocate and use mutexes. -** -** Usually, the default mutex implementations provided by SQLite are -** sufficient, however the user has the option of substituting a custom -** implementation for specialized deployments or systems for which SQLite -** does not provide a suitable implementation. In this case, the user -** creates and populates an instance of this structure to pass -** to sqlite3_config() along with the [SQLITE_CONFIG_MUTEX] option. -** Additionally, an instance of this structure can be used as an -** output variable when querying the system for the current mutex -** implementation, using the [SQLITE_CONFIG_GETMUTEX] option. -** -** ^The xMutexInit method defined by this structure is invoked as -** part of system initialization by the sqlite3_initialize() function. -** ^The xMutexInit routine is calle by SQLite exactly once for each -** effective call to [sqlite3_initialize()]. -** -** ^The xMutexEnd method defined by this structure is invoked as -** part of system shutdown by the sqlite3_shutdown() function. The -** implementation of this method is expected to release all outstanding -** resources obtained by the mutex methods implementation, especially -** those obtained by the xMutexInit method. ^The xMutexEnd() -** interface is invoked exactly once for each call to [sqlite3_shutdown()]. -** -** ^(The remaining seven methods defined by this structure (xMutexAlloc, -** xMutexFree, xMutexEnter, xMutexTry, xMutexLeave, xMutexHeld and -** xMutexNotheld) implement the following interfaces (respectively): -** -** )^ -** -** The only difference is that the public sqlite3_XXX functions enumerated -** above silently ignore any invocations that pass a NULL pointer instead -** of a valid mutex handle. The implementations of the methods defined -** by this structure are not required to handle this case, the results -** of passing a NULL pointer instead of a valid mutex handle are undefined -** (i.e. it is acceptable to provide an implementation that segfaults if -** it is passed a NULL pointer). -** -** The xMutexInit() method must be threadsafe. ^It must be harmless to -** invoke xMutexInit() mutiple times within the same process and without -** intervening calls to xMutexEnd(). Second and subsequent calls to -** xMutexInit() must be no-ops. -** -** ^xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()] -** and its associates). ^Similarly, xMutexAlloc() must not use SQLite memory -** allocation for a static mutex. ^However xMutexAlloc() may use SQLite -** memory allocation for a fast or recursive mutex. -** -** ^SQLite will invoke the xMutexEnd() method when [sqlite3_shutdown()] is -** called, but only if the prior call to xMutexInit returned SQLITE_OK. -** If xMutexInit fails in any way, it is expected to clean up after itself -** prior to returning. -*/ -typedef struct sqlite3_mutex_methods sqlite3_mutex_methods; -struct sqlite3_mutex_methods { - int (*xMutexInit)(void); - int (*xMutexEnd)(void); - sqlite3_mutex *(*xMutexAlloc)(int); - void (*xMutexFree)(sqlite3_mutex *); - void (*xMutexEnter)(sqlite3_mutex *); - int (*xMutexTry)(sqlite3_mutex *); - void (*xMutexLeave)(sqlite3_mutex *); - int (*xMutexHeld)(sqlite3_mutex *); - int (*xMutexNotheld)(sqlite3_mutex *); -}; - -/* -** CAPI3REF: Mutex Verification Routines -** -** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines -** are intended for use inside assert() statements. ^The SQLite core -** never uses these routines except inside an assert() and applications -** are advised to follow the lead of the core. ^The SQLite core only -** provides implementations for these routines when it is compiled -** with the SQLITE_DEBUG flag. ^External mutex implementations -** are only required to provide these routines if SQLITE_DEBUG is -** defined and if NDEBUG is not defined. -** -** ^These routines should return true if the mutex in their argument -** is held or not held, respectively, by the calling thread. -** -** ^The implementation is not required to provided versions of these -** routines that actually work. If the implementation does not provide working -** versions of these routines, it should at least provide stubs that always -** return true so that one does not get spurious assertion failures. -** -** ^If the argument to sqlite3_mutex_held() is a NULL pointer then -** the routine should return 1. This seems counter-intuitive since -** clearly the mutex cannot be held if it does not exist. But the -** the reason the mutex does not exist is because the build is not -** using mutexes. And we do not want the assert() containing the -** call to sqlite3_mutex_held() to fail, so a non-zero return is -** the appropriate thing to do. ^The sqlite3_mutex_notheld() -** interface should also return 1 when given a NULL pointer. -*/ -#ifndef NDEBUG -SQLITE_API int sqlite3_mutex_held(sqlite3_mutex*); -SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*); -#endif - -/* -** CAPI3REF: Mutex Types -** -** The [sqlite3_mutex_alloc()] interface takes a single argument -** which is one of these integer constants. -** -** The set of static mutexes may change from one SQLite release to the -** next. Applications that override the built-in mutex logic must be -** prepared to accommodate additional static mutexes. -*/ -#define SQLITE_MUTEX_FAST 0 -#define SQLITE_MUTEX_RECURSIVE 1 -#define SQLITE_MUTEX_STATIC_MASTER 2 -#define SQLITE_MUTEX_STATIC_MEM 3 /* sqlite3_malloc() */ -#define SQLITE_MUTEX_STATIC_MEM2 4 /* NOT USED */ -#define SQLITE_MUTEX_STATIC_OPEN 4 /* sqlite3BtreeOpen() */ -#define SQLITE_MUTEX_STATIC_PRNG 5 /* sqlite3_random() */ -#define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */ -#define SQLITE_MUTEX_STATIC_LRU2 7 /* lru page list */ - -/* -** CAPI3REF: Retrieve the mutex for a database connection -** -** ^This interface returns a pointer the [sqlite3_mutex] object that -** serializes access to the [database connection] given in the argument -** when the [threading mode] is Serialized. -** ^If the [threading mode] is Single-thread or Multi-thread then this -** routine returns a NULL pointer. -*/ -SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*); - -/* -** CAPI3REF: Low-Level Control Of Database Files -** -** ^The [sqlite3_file_control()] interface makes a direct call to the -** xFileControl method for the [sqlite3_io_methods] object associated -** with a particular database identified by the second argument. ^The -** name of the database "main" for the main database or "temp" for the -** TEMP database, or the name that appears after the AS keyword for -** databases that are added using the [ATTACH] SQL command. -** ^A NULL pointer can be used in place of "main" to refer to the -** main database file. -** ^The third and fourth parameters to this routine -** are passed directly through to the second and third parameters of -** the xFileControl method. ^The return value of the xFileControl -** method becomes the return value of this routine. -** -** ^If the second parameter (zDbName) does not match the name of any -** open database file, then SQLITE_ERROR is returned. ^This error -** code is not remembered and will not be recalled by [sqlite3_errcode()] -** or [sqlite3_errmsg()]. The underlying xFileControl method might -** also return SQLITE_ERROR. There is no way to distinguish between -** an incorrect zDbName and an SQLITE_ERROR return from the underlying -** xFileControl method. -** -** See also: [SQLITE_FCNTL_LOCKSTATE] -*/ -SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*); - -/* -** CAPI3REF: Testing Interface -** -** ^The sqlite3_test_control() interface is used to read out internal -** state of SQLite and to inject faults into SQLite for testing -** purposes. ^The first parameter is an operation code that determines -** the number, meaning, and operation of all subsequent parameters. -** -** This interface is not for use by applications. It exists solely -** for verifying the correct operation of the SQLite library. Depending -** on how the SQLite library is compiled, this interface might not exist. -** -** The details of the operation codes, their meanings, the parameters -** they take, and what they do are all subject to change without notice. -** Unlike most of the SQLite API, this function is not guaranteed to -** operate consistently from one release to the next. -*/ -SQLITE_API int sqlite3_test_control(int op, ...); - -/* -** CAPI3REF: Testing Interface Operation Codes -** -** These constants are the valid operation code parameters used -** as the first argument to [sqlite3_test_control()]. -** -** These parameters and their meanings are subject to change -** without notice. These values are for testing purposes only. -** Applications should not use any of these parameters or the -** [sqlite3_test_control()] interface. -*/ -#define SQLITE_TESTCTRL_FIRST 5 -#define SQLITE_TESTCTRL_PRNG_SAVE 5 -#define SQLITE_TESTCTRL_PRNG_RESTORE 6 -#define SQLITE_TESTCTRL_PRNG_RESET 7 -#define SQLITE_TESTCTRL_BITVEC_TEST 8 -#define SQLITE_TESTCTRL_FAULT_INSTALL 9 -#define SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS 10 -#define SQLITE_TESTCTRL_PENDING_BYTE 11 -#define SQLITE_TESTCTRL_ASSERT 12 -#define SQLITE_TESTCTRL_ALWAYS 13 -#define SQLITE_TESTCTRL_RESERVE 14 -#define SQLITE_TESTCTRL_OPTIMIZATIONS 15 -#define SQLITE_TESTCTRL_ISKEYWORD 16 -#define SQLITE_TESTCTRL_LAST 16 - -/* -** CAPI3REF: SQLite Runtime Status -** EXPERIMENTAL -** -** ^This interface is used to retrieve runtime status information -** about the preformance of SQLite, and optionally to reset various -** highwater marks. ^The first argument is an integer code for -** the specific parameter to measure. ^(Recognized integer codes -** are of the form [SQLITE_STATUS_MEMORY_USED | SQLITE_STATUS_...].)^ -** ^The current value of the parameter is returned into *pCurrent. -** ^The highest recorded value is returned in *pHighwater. ^If the -** resetFlag is true, then the highest record value is reset after -** *pHighwater is written. ^(Some parameters do not record the highest -** value. For those parameters -** nothing is written into *pHighwater and the resetFlag is ignored.)^ -** ^(Other parameters record only the highwater mark and not the current -** value. For these latter parameters nothing is written into *pCurrent.)^ -** -** ^The sqlite3_db_status() routine returns SQLITE_OK on success and a -** non-zero [error code] on failure. -** -** This routine is threadsafe but is not atomic. This routine can be -** called while other threads are running the same or different SQLite -** interfaces. However the values returned in *pCurrent and -** *pHighwater reflect the status of SQLite at different points in time -** and it is possible that another thread might change the parameter -** in between the times when *pCurrent and *pHighwater are written. -** -** See also: [sqlite3_db_status()] -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag); - - -/* -** CAPI3REF: Status Parameters -** EXPERIMENTAL -** -** These integer constants designate various run-time status parameters -** that can be returned by [sqlite3_status()]. -** -**
-** ^(
SQLITE_STATUS_MEMORY_USED
-**
This parameter is the current amount of memory checked out -** using [sqlite3_malloc()], either directly or indirectly. The -** figure includes calls made to [sqlite3_malloc()] by the application -** and internal memory usage by the SQLite library. Scratch memory -** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache -** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in -** this parameter. The amount returned is the sum of the allocation -** sizes as reported by the xSize method in [sqlite3_mem_methods].
)^ -** -** ^(
SQLITE_STATUS_MALLOC_SIZE
-**
This parameter records the largest memory allocation request -** handed to [sqlite3_malloc()] or [sqlite3_realloc()] (or their -** internal equivalents). Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.
)^ -** -** ^(
SQLITE_STATUS_PAGECACHE_USED
-**
This parameter returns the number of pages used out of the -** [pagecache memory allocator] that was configured using -** [SQLITE_CONFIG_PAGECACHE]. The -** value returned is in pages, not in bytes.
)^ -** -** ^(
SQLITE_STATUS_PAGECACHE_OVERFLOW
-**
This parameter returns the number of bytes of page cache -** allocation which could not be statisfied by the [SQLITE_CONFIG_PAGECACHE] -** buffer and where forced to overflow to [sqlite3_malloc()]. The -** returned value includes allocations that overflowed because they -** where too large (they were larger than the "sz" parameter to -** [SQLITE_CONFIG_PAGECACHE]) and allocations that overflowed because -** no space was left in the page cache.
)^ -** -** ^(
SQLITE_STATUS_PAGECACHE_SIZE
-**
This parameter records the largest memory allocation request -** handed to [pagecache memory allocator]. Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.
)^ -** -** ^(
SQLITE_STATUS_SCRATCH_USED
-**
This parameter returns the number of allocations used out of the -** [scratch memory allocator] configured using -** [SQLITE_CONFIG_SCRATCH]. The value returned is in allocations, not -** in bytes. Since a single thread may only have one scratch allocation -** outstanding at time, this parameter also reports the number of threads -** using scratch memory at the same time.
)^ -** -** ^(
SQLITE_STATUS_SCRATCH_OVERFLOW
-**
This parameter returns the number of bytes of scratch memory -** allocation which could not be statisfied by the [SQLITE_CONFIG_SCRATCH] -** buffer and where forced to overflow to [sqlite3_malloc()]. The values -** returned include overflows because the requested allocation was too -** larger (that is, because the requested allocation was larger than the -** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer -** slots were available. -**
)^ -** -** ^(
SQLITE_STATUS_SCRATCH_SIZE
-**
This parameter records the largest memory allocation request -** handed to [scratch memory allocator]. Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.
)^ -** -** ^(
SQLITE_STATUS_PARSER_STACK
-**
This parameter records the deepest parser stack. It is only -** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].
)^ -**
-** -** New status parameters may be added from time to time. -*/ -#define SQLITE_STATUS_MEMORY_USED 0 -#define SQLITE_STATUS_PAGECACHE_USED 1 -#define SQLITE_STATUS_PAGECACHE_OVERFLOW 2 -#define SQLITE_STATUS_SCRATCH_USED 3 -#define SQLITE_STATUS_SCRATCH_OVERFLOW 4 -#define SQLITE_STATUS_MALLOC_SIZE 5 -#define SQLITE_STATUS_PARSER_STACK 6 -#define SQLITE_STATUS_PAGECACHE_SIZE 7 -#define SQLITE_STATUS_SCRATCH_SIZE 8 - -/* -** CAPI3REF: Database Connection Status -** EXPERIMENTAL -** -** ^This interface is used to retrieve runtime status information -** about a single [database connection]. ^The first argument is the -** database connection object to be interrogated. ^The second argument -** is the parameter to interrogate. ^Currently, the only allowed value -** for the second parameter is [SQLITE_DBSTATUS_LOOKASIDE_USED]. -** Additional options will likely appear in future releases of SQLite. -** -** ^The current value of the requested parameter is written into *pCur -** and the highest instantaneous value is written into *pHiwtr. ^If -** the resetFlg is true, then the highest instantaneous value is -** reset back down to the current value. -** -** See also: [sqlite3_status()] and [sqlite3_stmt_status()]. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg); - -/* -** CAPI3REF: Status Parameters for database connections -** EXPERIMENTAL -** -** These constants are the available integer "verbs" that can be passed as -** the second argument to the [sqlite3_db_status()] interface. -** -** New verbs may be added in future releases of SQLite. Existing verbs -** might be discontinued. Applications should check the return code from -** [sqlite3_db_status()] to make sure that the call worked. -** The [sqlite3_db_status()] interface will return a non-zero error code -** if a discontinued or unsupported verb is invoked. -** -**
-** ^(
SQLITE_DBSTATUS_LOOKASIDE_USED
-**
This parameter returns the number of lookaside memory slots currently -** checked out.
)^ -**
-*/ -#define SQLITE_DBSTATUS_LOOKASIDE_USED 0 - - -/* -** CAPI3REF: Prepared Statement Status -** EXPERIMENTAL -** -** ^(Each prepared statement maintains various -** [SQLITE_STMTSTATUS_SORT | counters] that measure the number -** of times it has performed specific operations.)^ These counters can -** be used to monitor the performance characteristics of the prepared -** statements. For example, if the number of table steps greatly exceeds -** the number of table searches or result rows, that would tend to indicate -** that the prepared statement is using a full table scan rather than -** an index. -** -** ^(This interface is used to retrieve and reset counter values from -** a [prepared statement]. The first argument is the prepared statement -** object to be interrogated. The second argument -** is an integer code for a specific [SQLITE_STMTSTATUS_SORT | counter] -** to be interrogated.)^ -** ^The current value of the requested counter is returned. -** ^If the resetFlg is true, then the counter is reset to zero after this -** interface call returns. -** -** See also: [sqlite3_status()] and [sqlite3_db_status()]. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg); - -/* -** CAPI3REF: Status Parameters for prepared statements -** EXPERIMENTAL -** -** These preprocessor macros define integer codes that name counter -** values associated with the [sqlite3_stmt_status()] interface. -** The meanings of the various counters are as follows: -** -**
-**
SQLITE_STMTSTATUS_FULLSCAN_STEP
-**
^This is the number of times that SQLite has stepped forward in -** a table as part of a full table scan. Large numbers for this counter -** may indicate opportunities for performance improvement through -** careful use of indices.
-** -**
SQLITE_STMTSTATUS_SORT
-**
^This is the number of sort operations that have occurred. -** A non-zero value in this counter may indicate an opportunity to -** improvement performance through careful use of indices.
-** -**
-*/ -#define SQLITE_STMTSTATUS_FULLSCAN_STEP 1 -#define SQLITE_STMTSTATUS_SORT 2 - -/* -** CAPI3REF: Custom Page Cache Object -** EXPERIMENTAL -** -** The sqlite3_pcache type is opaque. It is implemented by -** the pluggable module. The SQLite core has no knowledge of -** its size or internal structure and never deals with the -** sqlite3_pcache object except by holding and passing pointers -** to the object. -** -** See [sqlite3_pcache_methods] for additional information. -*/ -typedef struct sqlite3_pcache sqlite3_pcache; - -/* -** CAPI3REF: Application Defined Page Cache. -** KEYWORDS: {page cache} -** EXPERIMENTAL -** -** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE], ...) interface can -** register an alternative page cache implementation by passing in an -** instance of the sqlite3_pcache_methods structure.)^ The majority of the -** heap memory used by SQLite is used by the page cache to cache data read -** from, or ready to be written to, the database file. By implementing a -** custom page cache using this API, an application can control more -** precisely the amount of memory consumed by SQLite, the way in which -** that memory is allocated and released, and the policies used to -** determine exactly which parts of a database file are cached and for -** how long. -** -** ^(The contents of the sqlite3_pcache_methods structure are copied to an -** internal buffer by SQLite within the call to [sqlite3_config]. Hence -** the application may discard the parameter after the call to -** [sqlite3_config()] returns.)^ -** -** ^The xInit() method is called once for each call to [sqlite3_initialize()] -** (usually only once during the lifetime of the process). ^(The xInit() -** method is passed a copy of the sqlite3_pcache_methods.pArg value.)^ -** ^The xInit() method can set up up global structures and/or any mutexes -** required by the custom page cache implementation. -** -** ^The xShutdown() method is called from within [sqlite3_shutdown()], -** if the application invokes this API. It can be used to clean up -** any outstanding resources before process shutdown, if required. -** -** ^SQLite holds a [SQLITE_MUTEX_RECURSIVE] mutex when it invokes -** the xInit method, so the xInit method need not be threadsafe. ^The -** xShutdown method is only called from [sqlite3_shutdown()] so it does -** not need to be threadsafe either. All other methods must be threadsafe -** in multithreaded applications. -** -** ^SQLite will never invoke xInit() more than once without an intervening -** call to xShutdown(). -** -** ^The xCreate() method is used to construct a new cache instance. SQLite -** will typically create one cache instance for each open database file, -** though this is not guaranteed. ^The -** first parameter, szPage, is the size in bytes of the pages that must -** be allocated by the cache. ^szPage will not be a power of two. ^szPage -** will the page size of the database file that is to be cached plus an -** increment (here called "R") of about 100 or 200. ^SQLite will use the -** extra R bytes on each page to store metadata about the underlying -** database page on disk. The value of R depends -** on the SQLite version, the target platform, and how SQLite was compiled. -** ^R is constant for a particular build of SQLite. ^The second argument to -** xCreate(), bPurgeable, is true if the cache being created will -** be used to cache database pages of a file stored on disk, or -** false if it is used for an in-memory database. ^The cache implementation -** does not have to do anything special based with the value of bPurgeable; -** it is purely advisory. ^On a cache where bPurgeable is false, SQLite will -** never invoke xUnpin() except to deliberately delete a page. -** ^In other words, a cache created with bPurgeable set to false will -** never contain any unpinned pages. -** -** ^(The xCachesize() method may be called at any time by SQLite to set the -** suggested maximum cache-size (number of pages stored by) the cache -** instance passed as the first argument. This is the value configured using -** the SQLite "[PRAGMA cache_size]" command.)^ ^As with the bPurgeable -** parameter, the implementation is not required to do anything with this -** value; it is advisory only. -** -** ^The xPagecount() method should return the number of pages currently -** stored in the cache. -** -** ^The xFetch() method is used to fetch a page and return a pointer to it. -** ^A 'page', in this context, is a buffer of szPage bytes aligned at an -** 8-byte boundary. ^The page to be fetched is determined by the key. ^The -** mimimum key value is 1. After it has been retrieved using xFetch, the page -** is considered to be "pinned". -** -** ^If the requested page is already in the page cache, then the page cache -** implementation must return a pointer to the page buffer with its content -** intact. ^(If the requested page is not already in the cache, then the -** behavior of the cache implementation is determined by the value of the -** createFlag parameter passed to xFetch, according to the following table: -** -** -**
createFlag Behaviour when page is not already in cache -**
0 Do not allocate a new page. Return NULL. -**
1 Allocate a new page if it easy and convenient to do so. -** Otherwise return NULL. -**
2 Make every effort to allocate a new page. Only return -** NULL if allocating a new page is effectively impossible. -**
)^ -** -** SQLite will normally invoke xFetch() with a createFlag of 0 or 1. If -** a call to xFetch() with createFlag==1 returns NULL, then SQLite will -** attempt to unpin one or more cache pages by spilling the content of -** pinned pages to disk and synching the operating system disk cache. After -** attempting to unpin pages, the xFetch() method will be invoked again with -** a createFlag of 2. -** -** ^xUnpin() is called by SQLite with a pointer to a currently pinned page -** as its second argument. ^(If the third parameter, discard, is non-zero, -** then the page should be evicted from the cache. In this case SQLite -** assumes that the next time the page is retrieved from the cache using -** the xFetch() method, it will be zeroed.)^ ^If the discard parameter is -** zero, then the page is considered to be unpinned. ^The cache implementation -** may choose to evict unpinned pages at any time. -** -** ^(The cache is not required to perform any reference counting. A single -** call to xUnpin() unpins the page regardless of the number of prior calls -** to xFetch().)^ -** -** ^The xRekey() method is used to change the key value associated with the -** page passed as the second argument from oldKey to newKey. ^If the cache -** previously contains an entry associated with newKey, it should be -** discarded. ^Any prior cache entry associated with newKey is guaranteed not -** to be pinned. -** -** ^When SQLite calls the xTruncate() method, the cache must discard all -** existing cache entries with page numbers (keys) greater than or equal -** to the value of the iLimit parameter passed to xTruncate(). ^If any -** of these pages are pinned, they are implicitly unpinned, meaning that -** they can be safely discarded. -** -** ^The xDestroy() method is used to delete a cache allocated by xCreate(). -** All resources associated with the specified cache should be freed. ^After -** calling the xDestroy() method, SQLite considers the [sqlite3_pcache*] -** handle invalid, and will not use it with any other sqlite3_pcache_methods -** functions. -*/ -typedef struct sqlite3_pcache_methods sqlite3_pcache_methods; -struct sqlite3_pcache_methods { - void *pArg; - int (*xInit)(void*); - void (*xShutdown)(void*); - sqlite3_pcache *(*xCreate)(int szPage, int bPurgeable); - void (*xCachesize)(sqlite3_pcache*, int nCachesize); - int (*xPagecount)(sqlite3_pcache*); - void *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag); - void (*xUnpin)(sqlite3_pcache*, void*, int discard); - void (*xRekey)(sqlite3_pcache*, void*, unsigned oldKey, unsigned newKey); - void (*xTruncate)(sqlite3_pcache*, unsigned iLimit); - void (*xDestroy)(sqlite3_pcache*); -}; - -/* -** CAPI3REF: Online Backup Object -** EXPERIMENTAL -** -** The sqlite3_backup object records state information about an ongoing -** online backup operation. ^The sqlite3_backup object is created by -** a call to [sqlite3_backup_init()] and is destroyed by a call to -** [sqlite3_backup_finish()]. -** -** See Also: [Using the SQLite Online Backup API] -*/ -typedef struct sqlite3_backup sqlite3_backup; - -/* -** CAPI3REF: Online Backup API. -** EXPERIMENTAL -** -** The backup API copies the content of one database into another. -** It is useful either for creating backups of databases or -** for copying in-memory databases to or from persistent files. -** -** See Also: [Using the SQLite Online Backup API] -** -** ^Exclusive access is required to the destination database for the -** duration of the operation. ^However the source database is only -** read-locked while it is actually being read; it is not locked -** continuously for the entire backup operation. ^Thus, the backup may be -** performed on a live source database without preventing other users from -** reading or writing to the source database while the backup is underway. -** -** ^(To perform a backup operation: -**
    -**
  1. sqlite3_backup_init() is called once to initialize the -** backup, -**
  2. sqlite3_backup_step() is called one or more times to transfer -** the data between the two databases, and finally -**
  3. sqlite3_backup_finish() is called to release all resources -** associated with the backup operation. -**
)^ -** There should be exactly one call to sqlite3_backup_finish() for each -** successful call to sqlite3_backup_init(). -** -** sqlite3_backup_init() -** -** ^The D and N arguments to sqlite3_backup_init(D,N,S,M) are the -** [database connection] associated with the destination database -** and the database name, respectively. -** ^The database name is "main" for the main database, "temp" for the -** temporary database, or the name specified after the AS keyword in -** an [ATTACH] statement for an attached database. -** ^The S and M arguments passed to -** sqlite3_backup_init(D,N,S,M) identify the [database connection] -** and database name of the source database, respectively. -** ^The source and destination [database connections] (parameters S and D) -** must be different or else sqlite3_backup_init(D,N,S,M) will file with -** an error. -** -** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is -** returned and an error code and error message are store3d in the -** destination [database connection] D. -** ^The error code and message for the failed call to sqlite3_backup_init() -** can be retrieved using the [sqlite3_errcode()], [sqlite3_errmsg()], and/or -** [sqlite3_errmsg16()] functions. -** ^A successful call to sqlite3_backup_init() returns a pointer to an -** [sqlite3_backup] object. -** ^The [sqlite3_backup] object may be used with the sqlite3_backup_step() and -** sqlite3_backup_finish() functions to perform the specified backup -** operation. -** -** sqlite3_backup_step() -** -** ^Function sqlite3_backup_step(B,N) will copy up to N pages between -** the source and destination databases specified by [sqlite3_backup] object B. -** ^If N is negative, all remaining source pages are copied. -** ^If sqlite3_backup_step(B,N) successfully copies N pages and there -** are still more pages to be copied, then the function resturns [SQLITE_OK]. -** ^If sqlite3_backup_step(B,N) successfully finishes copying all pages -** from source to destination, then it returns [SQLITE_DONE]. -** ^If an error occurs while running sqlite3_backup_step(B,N), -** then an [error code] is returned. ^As well as [SQLITE_OK] and -** [SQLITE_DONE], a call to sqlite3_backup_step() may return [SQLITE_READONLY], -** [SQLITE_NOMEM], [SQLITE_BUSY], [SQLITE_LOCKED], or an -** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX] extended error code. -** -** ^The sqlite3_backup_step() might return [SQLITE_READONLY] if the destination -** database was opened read-only or if -** the destination is an in-memory database with a different page size -** from the source database. -** -** ^If sqlite3_backup_step() cannot obtain a required file-system lock, then -** the [sqlite3_busy_handler | busy-handler function] -** is invoked (if one is specified). ^If the -** busy-handler returns non-zero before the lock is available, then -** [SQLITE_BUSY] is returned to the caller. ^In this case the call to -** sqlite3_backup_step() can be retried later. ^If the source -** [database connection] -** is being used to write to the source database when sqlite3_backup_step() -** is called, then [SQLITE_LOCKED] is returned immediately. ^Again, in this -** case the call to sqlite3_backup_step() can be retried later on. ^(If -** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX], [SQLITE_NOMEM], or -** [SQLITE_READONLY] is returned, then -** there is no point in retrying the call to sqlite3_backup_step(). These -** errors are considered fatal.)^ The application must accept -** that the backup operation has failed and pass the backup operation handle -** to the sqlite3_backup_finish() to release associated resources. -** -** ^The first call to sqlite3_backup_step() obtains an exclusive lock -** on the destination file. ^The exclusive lock is not released until either -** sqlite3_backup_finish() is called or the backup operation is complete -** and sqlite3_backup_step() returns [SQLITE_DONE]. ^Every call to -** sqlite3_backup_step() obtains a [shared lock] on the source database that -** lasts for the duration of the sqlite3_backup_step() call. -** ^Because the source database is not locked between calls to -** sqlite3_backup_step(), the source database may be modified mid-way -** through the backup process. ^If the source database is modified by an -** external process or via a database connection other than the one being -** used by the backup operation, then the backup will be automatically -** restarted by the next call to sqlite3_backup_step(). ^If the source -** database is modified by the using the same database connection as is used -** by the backup operation, then the backup database is automatically -** updated at the same time. -** -** sqlite3_backup_finish() -** -** When sqlite3_backup_step() has returned [SQLITE_DONE], or when the -** application wishes to abandon the backup operation, the application -** should destroy the [sqlite3_backup] by passing it to sqlite3_backup_finish(). -** ^The sqlite3_backup_finish() interfaces releases all -** resources associated with the [sqlite3_backup] object. -** ^If sqlite3_backup_step() has not yet returned [SQLITE_DONE], then any -** active write-transaction on the destination database is rolled back. -** The [sqlite3_backup] object is invalid -** and may not be used following a call to sqlite3_backup_finish(). -** -** ^The value returned by sqlite3_backup_finish is [SQLITE_OK] if no -** sqlite3_backup_step() errors occurred, regardless or whether or not -** sqlite3_backup_step() completed. -** ^If an out-of-memory condition or IO error occurred during any prior -** sqlite3_backup_step() call on the same [sqlite3_backup] object, then -** sqlite3_backup_finish() returns the corresponding [error code]. -** -** ^A return of [SQLITE_BUSY] or [SQLITE_LOCKED] from sqlite3_backup_step() -** is not a permanent error and does not affect the return value of -** sqlite3_backup_finish(). -** -** sqlite3_backup_remaining(), sqlite3_backup_pagecount() -** -** ^Each call to sqlite3_backup_step() sets two values inside -** the [sqlite3_backup] object: the number of pages still to be backed -** up and the total number of pages in the source databae file. -** The sqlite3_backup_remaining() and sqlite3_backup_pagecount() interfaces -** retrieve these two values, respectively. -** -** ^The values returned by these functions are only updated by -** sqlite3_backup_step(). ^If the source database is modified during a backup -** operation, then the values are not updated to account for any extra -** pages that need to be updated or the size of the source database file -** changing. -** -** Concurrent Usage of Database Handles -** -** ^The source [database connection] may be used by the application for other -** purposes while a backup operation is underway or being initialized. -** ^If SQLite is compiled and configured to support threadsafe database -** connections, then the source database connection may be used concurrently -** from within other threads. -** -** However, the application must guarantee that the destination -** [database connection] is not passed to any other API (by any thread) after -** sqlite3_backup_init() is called and before the corresponding call to -** sqlite3_backup_finish(). SQLite does not currently check to see -** if the application incorrectly accesses the destination [database connection] -** and so no error code is reported, but the operations may malfunction -** nevertheless. Use of the destination database connection while a -** backup is in progress might also also cause a mutex deadlock. -** -** If running in [shared cache mode], the application must -** guarantee that the shared cache used by the destination database -** is not accessed while the backup is running. In practice this means -** that the application must guarantee that the disk file being -** backed up to is not accessed by any connection within the process, -** not just the specific connection that was passed to sqlite3_backup_init(). -** -** The [sqlite3_backup] object itself is partially threadsafe. Multiple -** threads may safely make multiple concurrent calls to sqlite3_backup_step(). -** However, the sqlite3_backup_remaining() and sqlite3_backup_pagecount() -** APIs are not strictly speaking threadsafe. If they are invoked at the -** same time as another thread is invoking sqlite3_backup_step() it is -** possible that they return invalid values. -*/ -SQLITE_API sqlite3_backup *sqlite3_backup_init( - sqlite3 *pDest, /* Destination database handle */ - const char *zDestName, /* Destination database name */ - sqlite3 *pSource, /* Source database handle */ - const char *zSourceName /* Source database name */ -); -SQLITE_API int sqlite3_backup_step(sqlite3_backup *p, int nPage); -SQLITE_API int sqlite3_backup_finish(sqlite3_backup *p); -SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p); -SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p); - -/* -** CAPI3REF: Unlock Notification -** EXPERIMENTAL -** -** ^When running in shared-cache mode, a database operation may fail with -** an [SQLITE_LOCKED] error if the required locks on the shared-cache or -** individual tables within the shared-cache cannot be obtained. See -** [SQLite Shared-Cache Mode] for a description of shared-cache locking. -** ^This API may be used to register a callback that SQLite will invoke -** when the connection currently holding the required lock relinquishes it. -** ^This API is only available if the library was compiled with the -** [SQLITE_ENABLE_UNLOCK_NOTIFY] C-preprocessor symbol defined. -** -** See Also: [Using the SQLite Unlock Notification Feature]. -** -** ^Shared-cache locks are released when a database connection concludes -** its current transaction, either by committing it or rolling it back. -** -** ^When a connection (known as the blocked connection) fails to obtain a -** shared-cache lock and SQLITE_LOCKED is returned to the caller, the -** identity of the database connection (the blocking connection) that -** has locked the required resource is stored internally. ^After an -** application receives an SQLITE_LOCKED error, it may call the -** sqlite3_unlock_notify() method with the blocked connection handle as -** the first argument to register for a callback that will be invoked -** when the blocking connections current transaction is concluded. ^The -** callback is invoked from within the [sqlite3_step] or [sqlite3_close] -** call that concludes the blocking connections transaction. -** -** ^(If sqlite3_unlock_notify() is called in a multi-threaded application, -** there is a chance that the blocking connection will have already -** concluded its transaction by the time sqlite3_unlock_notify() is invoked. -** If this happens, then the specified callback is invoked immediately, -** from within the call to sqlite3_unlock_notify().)^ -** -** ^If the blocked connection is attempting to obtain a write-lock on a -** shared-cache table, and more than one other connection currently holds -** a read-lock on the same table, then SQLite arbitrarily selects one of -** the other connections to use as the blocking connection. -** -** ^(There may be at most one unlock-notify callback registered by a -** blocked connection. If sqlite3_unlock_notify() is called when the -** blocked connection already has a registered unlock-notify callback, -** then the new callback replaces the old.)^ ^If sqlite3_unlock_notify() is -** called with a NULL pointer as its second argument, then any existing -** unlock-notify callback is cancelled. ^The blocked connections -** unlock-notify callback may also be canceled by closing the blocked -** connection using [sqlite3_close()]. -** -** The unlock-notify callback is not reentrant. If an application invokes -** any sqlite3_xxx API functions from within an unlock-notify callback, a -** crash or deadlock may be the result. -** -** ^Unless deadlock is detected (see below), sqlite3_unlock_notify() always -** returns SQLITE_OK. -** -** Callback Invocation Details -** -** When an unlock-notify callback is registered, the application provides a -** single void* pointer that is passed to the callback when it is invoked. -** However, the signature of the callback function allows SQLite to pass -** it an array of void* context pointers. The first argument passed to -** an unlock-notify callback is a pointer to an array of void* pointers, -** and the second is the number of entries in the array. -** -** When a blocking connections transaction is concluded, there may be -** more than one blocked connection that has registered for an unlock-notify -** callback. ^If two or more such blocked connections have specified the -** same callback function, then instead of invoking the callback function -** multiple times, it is invoked once with the set of void* context pointers -** specified by the blocked connections bundled together into an array. -** This gives the application an opportunity to prioritize any actions -** related to the set of unblocked database connections. -** -** Deadlock Detection -** -** Assuming that after registering for an unlock-notify callback a -** database waits for the callback to be issued before taking any further -** action (a reasonable assumption), then using this API may cause the -** application to deadlock. For example, if connection X is waiting for -** connection Y's transaction to be concluded, and similarly connection -** Y is waiting on connection X's transaction, then neither connection -** will proceed and the system may remain deadlocked indefinitely. -** -** To avoid this scenario, the sqlite3_unlock_notify() performs deadlock -** detection. ^If a given call to sqlite3_unlock_notify() would put the -** system in a deadlocked state, then SQLITE_LOCKED is returned and no -** unlock-notify callback is registered. The system is said to be in -** a deadlocked state if connection A has registered for an unlock-notify -** callback on the conclusion of connection B's transaction, and connection -** B has itself registered for an unlock-notify callback when connection -** A's transaction is concluded. ^Indirect deadlock is also detected, so -** the system is also considered to be deadlocked if connection B has -** registered for an unlock-notify callback on the conclusion of connection -** C's transaction, where connection C is waiting on connection A. ^Any -** number of levels of indirection are allowed. -** -** The "DROP TABLE" Exception -** -** When a call to [sqlite3_step()] returns SQLITE_LOCKED, it is almost -** always appropriate to call sqlite3_unlock_notify(). There is however, -** one exception. When executing a "DROP TABLE" or "DROP INDEX" statement, -** SQLite checks if there are any currently executing SELECT statements -** that belong to the same connection. If there are, SQLITE_LOCKED is -** returned. In this case there is no "blocking connection", so invoking -** sqlite3_unlock_notify() results in the unlock-notify callback being -** invoked immediately. If the application then re-attempts the "DROP TABLE" -** or "DROP INDEX" query, an infinite loop might be the result. -** -** One way around this problem is to check the extended error code returned -** by an sqlite3_step() call. ^(If there is a blocking connection, then the -** extended error code is set to SQLITE_LOCKED_SHAREDCACHE. Otherwise, in -** the special "DROP TABLE/INDEX" case, the extended error code is just -** SQLITE_LOCKED.)^ -*/ -SQLITE_API int sqlite3_unlock_notify( - sqlite3 *pBlocked, /* Waiting connection */ - void (*xNotify)(void **apArg, int nArg), /* Callback function to invoke */ - void *pNotifyArg /* Argument to pass to xNotify */ -); - - -/* -** CAPI3REF: String Comparison -** EXPERIMENTAL -** -** ^The [sqlite3_strnicmp()] API allows applications and extensions to -** compare the contents of two buffers containing UTF-8 strings in a -** case-indendent fashion, using the same definition of case independence -** that SQLite uses internally when comparing identifiers. -*/ -SQLITE_API int sqlite3_strnicmp(const char *, const char *, int); - -/* -** CAPI3REF: Error Logging Interface -** EXPERIMENTAL -** -** ^The [sqlite3_log()] interface writes a message into the error log -** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()]. -** ^If logging is enabled, the zFormat string and subsequent arguments are -** passed through to [sqlite3_vmprintf()] to generate the final output string. -** -** The sqlite3_log() interface is intended for use by extensions such as -** virtual tables, collating functions, and SQL functions. While there is -** nothing to prevent an application from calling sqlite3_log(), doing so -** is considered bad form. -** -** The zFormat string must not be NULL. -** -** To avoid deadlocks and other threading problems, the sqlite3_log() routine -** will not use dynamically allocated memory. The log message is stored in -** a fixed-length buffer on the stack. If the log message is longer than -** a few hundred characters, it will be truncated to the length of the -** buffer. -*/ -SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...); - -/* -** Undo the hack that converts floating point types to integer for -** builds on processors without floating point support. -*/ -#ifdef SQLITE_OMIT_FLOATING_POINT -# undef double -#endif - -#ifdef __cplusplus -} /* End of the 'extern "C"' block */ -#endif -#endif - diff --git a/win32/sqlite3.lib b/win32/sqlite3.lib deleted file mode 100644 index 160223f..0000000 Binary files a/win32/sqlite3.lib and /dev/null differ diff --git a/win64/CMakeLists.txt b/win64/CMakeLists.txt deleted file mode 100644 index 0903896..0000000 --- a/win64/CMakeLists.txt +++ /dev/null @@ -1,30 +0,0 @@ -# --------------------------------------------------------------------- -# -# Copyright (c) CREATIS (Centre de Recherche en Acquisition et Traitement de l'Image -# pour la Santé) -# Authors : Eduardo Davila, Frederic Cervenansky, Claire Mouton -# Previous Authors : Laurent Guigues, Jean-Pierre Roux -# CreaTools website : www.creatis.insa-lyon.fr/site/fr/creatools_accueil -# -# This software is governed by the CeCILL-B license under French law and -# abiding by the rules of distribution of free software. You can use, -# modify and/ or redistribute the software under the terms of the CeCILL-B -# license as circulated by CEA, CNRS and INRIA at the following URL -# http://www.cecill.info/licences/Licence_CeCILL-B_V1-en.html -# or in the file LICENSE.txt. -# -# As a counterpart to the access to the source code and rights to copy, -# modify and redistribute granted by the license, users are provided only -# with a limited warranty and the software's author, the holder of the -# economic rights, and the successive licensors have only limited -# liability. -# -# The fact that you are presently reading this means that you have had -# knowledge of the CeCILL-B license and that you accept its terms. -# ------------------------------------------------------------------------ - -IF (WIN32) - configure_file(sqlite3.dll ${PROJECT_BINARY_DIR}/Debug/sqlite3.dll COPYONLY) - configure_file(sqlite3.dll ${PROJECT_BINARY_DIR}/Release/sqlite3.dll COPYONLY) - configure_file(sqlite3.dll ${PROJECT_BINARY_DIR}/RelWithDebInfo/sqlite3.dll COPYONLY) -ENDIF(WIN32) \ No newline at end of file diff --git a/win64/sqlite/CMakeLists.txt b/win64/sqlite/CMakeLists.txt deleted file mode 100644 index 558a32e..0000000 --- a/win64/sqlite/CMakeLists.txt +++ /dev/null @@ -1,37 +0,0 @@ -cmake_minimum_required ( VERSION 2.6 FATAL_ERROR ) - -project ( sqlite3 C ) - -SET( CMAKE_INSTALL_PREFIX "" ) - -set ( SOURCES sqlite3.c ) -set ( HEADERS sqlite3.h ) - -if ( WIN32 ) - if ( MSVC ) -# set ( CMAKE_SHARED_LINKER_FLAGS /DEF:sqlite3.def ) -# set ( SQLITE3_DEF_FILE "${CMAKE_CURRENT_BINARY_DIR}/sqlite3.def" ) - add_definitions( "-DSQLITE_API=__declspec(dllexport)" ) - endif ( MSVC ) -endif ( WIN32 ) - - FIND_PACKAGE(GDCM REQUIRED) - INCLUDE_DIRECTORIES(${GDCM_INCLUDE_DIRS}) - - -# ${GDCM_DIR}/bin/Debug/gdcmDSED.lib - # ${GDCM_DIR}/bin/Debug/gdcmMSFF.lib) - -add_library ( sqlite3 SHARED - ${SOURCES} - ${HEADERS} - gdcmDSED.lib -) - -INSTALL ( TARGETS sqlite3 - RUNTIME DESTINATION bin - LIBRARY DESTINATION lib - ARCHIVE DESTINATION lib -) - -INSTALL ( FILES sqlite3.h DESTINATION include ) diff --git a/win64/sqlite/Readme.txt b/win64/sqlite/Readme.txt deleted file mode 100644 index 82ed146..0000000 --- a/win64/sqlite/Readme.txt +++ /dev/null @@ -1,18 +0,0 @@ -//////////////////////////////////////////// -// README // -//////////////////////////////////////////// - -If you need to rebuild sqlite library (.lib and .dll), -Use the associated CMakeLists file to generate a sqlite project with the right compilator (x64 or x86). -Check on SQLITE website if a new version of sqlite is not avaialble. -http://www.sqlite.org/download.html - -!!! IMPORTANT : you just need to download amalgation package and replace files : -shell.c -sqlite3.c -sqlite.h -sqlite3ext.h -sqlite3.def - -(last version 3.6.23.1) - diff --git a/win64/sqlite/shell.c b/win64/sqlite/shell.c deleted file mode 100644 index a1c0b5e..0000000 --- a/win64/sqlite/shell.c +++ /dev/null @@ -1,2635 +0,0 @@ -/* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This file contains code to implement the "sqlite" command line -** utility for accessing SQLite databases. -*/ -#if defined(_WIN32) || defined(WIN32) -/* This needs to come before any includes for MSVC compiler */ -#define _CRT_SECURE_NO_WARNINGS -#endif - -#include -#include -#include -#include -#include "sqlite3.h" -#include -#include - -#if !defined(_WIN32) && !defined(WIN32) && !defined(__OS2__) -# include -# if !defined(__RTP__) && !defined(_WRS_KERNEL) -# include -# endif -# include -# include -#endif - -#ifdef __OS2__ -# include -#endif - -#if defined(HAVE_READLINE) && HAVE_READLINE==1 -# include -# include -#else -# define readline(p) local_getline(p,stdin) -# define add_history(X) -# define read_history(X) -# define write_history(X) -# define stifle_history(X) -#endif - -#if defined(_WIN32) || defined(WIN32) -# include -#define isatty(h) _isatty(h) -#define access(f,m) _access((f),(m)) -#else -/* Make sure isatty() has a prototype. -*/ -extern int isatty(); -#endif - -#if defined(_WIN32_WCE) -/* Windows CE (arm-wince-mingw32ce-gcc) does not provide isatty() - * thus we always assume that we have a console. That can be - * overridden with the -batch command line option. - */ -#define isatty(x) 1 -#endif - -#if !defined(_WIN32) && !defined(WIN32) && !defined(__OS2__) && !defined(__RTP__) && !defined(_WRS_KERNEL) -#include -#include - -/* Saved resource information for the beginning of an operation */ -static struct rusage sBegin; - -/* True if the timer is enabled */ -static int enableTimer = 0; - -/* -** Begin timing an operation -*/ -static void beginTimer(void){ - if( enableTimer ){ - getrusage(RUSAGE_SELF, &sBegin); - } -} - -/* Return the difference of two time_structs in seconds */ -static double timeDiff(struct timeval *pStart, struct timeval *pEnd){ - return (pEnd->tv_usec - pStart->tv_usec)*0.000001 + - (double)(pEnd->tv_sec - pStart->tv_sec); -} - -/* -** Print the timing results. -*/ -static void endTimer(void){ - if( enableTimer ){ - struct rusage sEnd; - getrusage(RUSAGE_SELF, &sEnd); - printf("CPU Time: user %f sys %f\n", - timeDiff(&sBegin.ru_utime, &sEnd.ru_utime), - timeDiff(&sBegin.ru_stime, &sEnd.ru_stime)); - } -} - -#define BEGIN_TIMER beginTimer() -#define END_TIMER endTimer() -#define HAS_TIMER 1 - -#elif (defined(_WIN32) || defined(WIN32)) - -#include - -/* Saved resource information for the beginning of an operation */ -static HANDLE hProcess; -static FILETIME ftKernelBegin; -static FILETIME ftUserBegin; -typedef BOOL (WINAPI *GETPROCTIMES)(HANDLE, LPFILETIME, LPFILETIME, LPFILETIME, LPFILETIME); -static GETPROCTIMES getProcessTimesAddr = NULL; - -/* True if the timer is enabled */ -static int enableTimer = 0; - -/* -** Check to see if we have timer support. Return 1 if necessary -** support found (or found previously). -*/ -static int hasTimer(void){ - if( getProcessTimesAddr ){ - return 1; - } else { - /* GetProcessTimes() isn't supported in WIN95 and some other Windows versions. - ** See if the version we are running on has it, and if it does, save off - ** a pointer to it and the current process handle. - */ - hProcess = GetCurrentProcess(); - if( hProcess ){ - HINSTANCE hinstLib = LoadLibrary(TEXT("Kernel32.dll")); - if( NULL != hinstLib ){ - getProcessTimesAddr = (GETPROCTIMES) GetProcAddress(hinstLib, "GetProcessTimes"); - if( NULL != getProcessTimesAddr ){ - return 1; - } - FreeLibrary(hinstLib); - } - } - } - return 0; -} - -/* -** Begin timing an operation -*/ -static void beginTimer(void){ - if( enableTimer && getProcessTimesAddr ){ - FILETIME ftCreation, ftExit; - getProcessTimesAddr(hProcess, &ftCreation, &ftExit, &ftKernelBegin, &ftUserBegin); - } -} - -/* Return the difference of two FILETIME structs in seconds */ -static double timeDiff(FILETIME *pStart, FILETIME *pEnd){ - sqlite_int64 i64Start = *((sqlite_int64 *) pStart); - sqlite_int64 i64End = *((sqlite_int64 *) pEnd); - return (double) ((i64End - i64Start) / 10000000.0); -} - -/* -** Print the timing results. -*/ -static void endTimer(void){ - if( enableTimer && getProcessTimesAddr){ - FILETIME ftCreation, ftExit, ftKernelEnd, ftUserEnd; - getProcessTimesAddr(hProcess, &ftCreation, &ftExit, &ftKernelEnd, &ftUserEnd); - printf("CPU Time: user %f sys %f\n", - timeDiff(&ftUserBegin, &ftUserEnd), - timeDiff(&ftKernelBegin, &ftKernelEnd)); - } -} - -#define BEGIN_TIMER beginTimer() -#define END_TIMER endTimer() -#define HAS_TIMER hasTimer() - -#else -#define BEGIN_TIMER -#define END_TIMER -#define HAS_TIMER 0 -#endif - -/* -** Used to prevent warnings about unused parameters -*/ -#define UNUSED_PARAMETER(x) (void)(x) - -/* -** If the following flag is set, then command execution stops -** at an error if we are not interactive. -*/ -static int bail_on_error = 0; - -/* -** Threat stdin as an interactive input if the following variable -** is true. Otherwise, assume stdin is connected to a file or pipe. -*/ -static int stdin_is_interactive = 1; - -/* -** The following is the open SQLite database. We make a pointer -** to this database a static variable so that it can be accessed -** by the SIGINT handler to interrupt database processing. -*/ -static sqlite3 *db = 0; - -/* -** True if an interrupt (Control-C) has been received. -*/ -static volatile int seenInterrupt = 0; - -/* -** This is the name of our program. It is set in main(), used -** in a number of other places, mostly for error messages. -*/ -static char *Argv0; - -/* -** Prompt strings. Initialized in main. Settable with -** .prompt main continue -*/ -static char mainPrompt[20]; /* First line prompt. default: "sqlite> "*/ -static char continuePrompt[20]; /* Continuation prompt. default: " ...> " */ - -/* -** Write I/O traces to the following stream. -*/ -#ifdef SQLITE_ENABLE_IOTRACE -static FILE *iotrace = 0; -#endif - -/* -** This routine works like printf in that its first argument is a -** format string and subsequent arguments are values to be substituted -** in place of % fields. The result of formatting this string -** is written to iotrace. -*/ -#ifdef SQLITE_ENABLE_IOTRACE -static void iotracePrintf(const char *zFormat, ...){ - va_list ap; - char *z; - if( iotrace==0 ) return; - va_start(ap, zFormat); - z = sqlite3_vmprintf(zFormat, ap); - va_end(ap); - fprintf(iotrace, "%s", z); - sqlite3_free(z); -} -#endif - - -/* -** Determines if a string is a number of not. -*/ -static int isNumber(const char *z, int *realnum){ - if( *z=='-' || *z=='+' ) z++; - if( !isdigit(*z) ){ - return 0; - } - z++; - if( realnum ) *realnum = 0; - while( isdigit(*z) ){ z++; } - if( *z=='.' ){ - z++; - if( !isdigit(*z) ) return 0; - while( isdigit(*z) ){ z++; } - if( realnum ) *realnum = 1; - } - if( *z=='e' || *z=='E' ){ - z++; - if( *z=='+' || *z=='-' ) z++; - if( !isdigit(*z) ) return 0; - while( isdigit(*z) ){ z++; } - if( realnum ) *realnum = 1; - } - return *z==0; -} - -/* -** A global char* and an SQL function to access its current value -** from within an SQL statement. This program used to use the -** sqlite_exec_printf() API to substitue a string into an SQL statement. -** The correct way to do this with sqlite3 is to use the bind API, but -** since the shell is built around the callback paradigm it would be a lot -** of work. Instead just use this hack, which is quite harmless. -*/ -static const char *zShellStatic = 0; -static void shellstaticFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv -){ - assert( 0==argc ); - assert( zShellStatic ); - UNUSED_PARAMETER(argc); - UNUSED_PARAMETER(argv); - sqlite3_result_text(context, zShellStatic, -1, SQLITE_STATIC); -} - - -/* -** This routine reads a line of text from FILE in, stores -** the text in memory obtained from malloc() and returns a pointer -** to the text. NULL is returned at end of file, or if malloc() -** fails. -** -** The interface is like "readline" but no command-line editing -** is done. -*/ -static char *local_getline(char *zPrompt, FILE *in){ - char *zLine; - int nLine; - int n; - int eol; - - if( zPrompt && *zPrompt ){ - printf("%s",zPrompt); - fflush(stdout); - } - nLine = 100; - zLine = malloc( nLine ); - if( zLine==0 ) return 0; - n = 0; - eol = 0; - while( !eol ){ - if( n+100>nLine ){ - nLine = nLine*2 + 100; - zLine = realloc(zLine, nLine); - if( zLine==0 ) return 0; - } - if( fgets(&zLine[n], nLine - n, in)==0 ){ - if( n==0 ){ - free(zLine); - return 0; - } - zLine[n] = 0; - eol = 1; - break; - } - while( zLine[n] ){ n++; } - if( n>0 && zLine[n-1]=='\n' ){ - n--; - if( n>0 && zLine[n-1]=='\r' ) n--; - zLine[n] = 0; - eol = 1; - } - } - zLine = realloc( zLine, n+1 ); - return zLine; -} - -/* -** Retrieve a single line of input text. -** -** zPrior is a string of prior text retrieved. If not the empty -** string, then issue a continuation prompt. -*/ -static char *one_input_line(const char *zPrior, FILE *in){ - char *zPrompt; - char *zResult; - if( in!=0 ){ - return local_getline(0, in); - } - if( zPrior && zPrior[0] ){ - zPrompt = continuePrompt; - }else{ - zPrompt = mainPrompt; - } - zResult = readline(zPrompt); -#if defined(HAVE_READLINE) && HAVE_READLINE==1 - if( zResult && *zResult ) add_history(zResult); -#endif - return zResult; -} - -struct previous_mode_data { - int valid; /* Is there legit data in here? */ - int mode; - int showHeader; - int colWidth[100]; -}; - -/* -** An pointer to an instance of this structure is passed from -** the main program to the callback. This is used to communicate -** state and mode information. -*/ -struct callback_data { - sqlite3 *db; /* The database */ - int echoOn; /* True to echo input commands */ - int cnt; /* Number of records displayed so far */ - FILE *out; /* Write results here */ - int mode; /* An output mode setting */ - int writableSchema; /* True if PRAGMA writable_schema=ON */ - int showHeader; /* True to show column names in List or Column mode */ - char *zDestTable; /* Name of destination table when MODE_Insert */ - char separator[20]; /* Separator character for MODE_List */ - int colWidth[100]; /* Requested width of each column when in column mode*/ - int actualWidth[100]; /* Actual width of each column */ - char nullvalue[20]; /* The text to print when a NULL comes back from - ** the database */ - struct previous_mode_data explainPrev; - /* Holds the mode information just before - ** .explain ON */ - char outfile[FILENAME_MAX]; /* Filename for *out */ - const char *zDbFilename; /* name of the database file */ - sqlite3_stmt *pStmt; /* Current statement if any. */ - FILE *pLog; /* Write log output here */ -}; - -/* -** These are the allowed modes. -*/ -#define MODE_Line 0 /* One column per line. Blank line between records */ -#define MODE_Column 1 /* One record per line in neat columns */ -#define MODE_List 2 /* One record per line with a separator */ -#define MODE_Semi 3 /* Same as MODE_List but append ";" to each line */ -#define MODE_Html 4 /* Generate an XHTML table */ -#define MODE_Insert 5 /* Generate SQL "insert" statements */ -#define MODE_Tcl 6 /* Generate ANSI-C or TCL quoted elements */ -#define MODE_Csv 7 /* Quote strings, numbers are plain */ -#define MODE_Explain 8 /* Like MODE_Column, but do not truncate data */ - -static const char *modeDescr[] = { - "line", - "column", - "list", - "semi", - "html", - "insert", - "tcl", - "csv", - "explain", -}; - -/* -** Number of elements in an array -*/ -#define ArraySize(X) (int)(sizeof(X)/sizeof(X[0])) - -/* -** Compute a string length that is limited to what can be stored in -** lower 30 bits of a 32-bit signed integer. -*/ -static int strlen30(const char *z){ - const char *z2 = z; - while( *z2 ){ z2++; } - return 0x3fffffff & (int)(z2 - z); -} - -/* -** A callback for the sqlite3_log() interface. -*/ -static void shellLog(void *pArg, int iErrCode, const char *zMsg){ - struct callback_data *p = (struct callback_data*)pArg; - if( p->pLog==0 ) return; - fprintf(p->pLog, "(%d) %s\n", iErrCode, zMsg); - fflush(p->pLog); -} - -/* -** Output the given string as a hex-encoded blob (eg. X'1234' ) -*/ -static void output_hex_blob(FILE *out, const void *pBlob, int nBlob){ - int i; - char *zBlob = (char *)pBlob; - fprintf(out,"X'"); - for(i=0; i0 ){ - fprintf(out,"%.*s",i,z); - } - if( z[i]=='<' ){ - fprintf(out,"<"); - }else if( z[i]=='&' ){ - fprintf(out,"&"); - }else if( z[i]=='>' ){ - fprintf(out,">"); - }else if( z[i]=='\"' ){ - fprintf(out,"""); - }else if( z[i]=='\'' ){ - fprintf(out,"'"); - }else{ - break; - } - z += i + 1; - } -} - -/* -** If a field contains any character identified by a 1 in the following -** array, then the string must be quoted for CSV. -*/ -static const char needCsvQuote[] = { - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 0, 1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, -}; - -/* -** Output a single term of CSV. Actually, p->separator is used for -** the separator, which may or may not be a comma. p->nullvalue is -** the null value. Strings are quoted using ANSI-C rules. Numbers -** appear outside of quotes. -*/ -static void output_csv(struct callback_data *p, const char *z, int bSep){ - FILE *out = p->out; - if( z==0 ){ - fprintf(out,"%s",p->nullvalue); - }else{ - int i; - int nSep = strlen30(p->separator); - for(i=0; z[i]; i++){ - if( needCsvQuote[((unsigned char*)z)[i]] - || (z[i]==p->separator[0] && - (nSep==1 || memcmp(z, p->separator, nSep)==0)) ){ - i = 0; - break; - } - } - if( i==0 ){ - putc('"', out); - for(i=0; z[i]; i++){ - if( z[i]=='"' ) putc('"', out); - putc(z[i], out); - } - putc('"', out); - }else{ - fprintf(out, "%s", z); - } - } - if( bSep ){ - fprintf(p->out, "%s", p->separator); - } -} - -#ifdef SIGINT -/* -** This routine runs when the user presses Ctrl-C -*/ -static void interrupt_handler(int NotUsed){ - UNUSED_PARAMETER(NotUsed); - seenInterrupt = 1; - if( db ) sqlite3_interrupt(db); -} -#endif - -/* -** This is the callback routine that the shell -** invokes for each row of a query result. -*/ -static int shell_callback(void *pArg, int nArg, char **azArg, char **azCol, int *aiType){ - int i; - struct callback_data *p = (struct callback_data*)pArg; - - switch( p->mode ){ - case MODE_Line: { - int w = 5; - if( azArg==0 ) break; - for(i=0; iw ) w = len; - } - if( p->cnt++>0 ) fprintf(p->out,"\n"); - for(i=0; iout,"%*s = %s\n", w, azCol[i], - azArg[i] ? azArg[i] : p->nullvalue); - } - break; - } - case MODE_Explain: - case MODE_Column: { - if( p->cnt++==0 ){ - for(i=0; icolWidth) ){ - w = p->colWidth[i]; - }else{ - w = 0; - } - if( w<=0 ){ - w = strlen30(azCol[i] ? azCol[i] : ""); - if( w<10 ) w = 10; - n = strlen30(azArg && azArg[i] ? azArg[i] : p->nullvalue); - if( wactualWidth) ){ - p->actualWidth[i] = w; - } - if( p->showHeader ){ - fprintf(p->out,"%-*.*s%s",w,w,azCol[i], i==nArg-1 ? "\n": " "); - } - } - if( p->showHeader ){ - for(i=0; iactualWidth) ){ - w = p->actualWidth[i]; - }else{ - w = 10; - } - fprintf(p->out,"%-*.*s%s",w,w,"-----------------------------------" - "----------------------------------------------------------", - i==nArg-1 ? "\n": " "); - } - } - } - if( azArg==0 ) break; - for(i=0; iactualWidth) ){ - w = p->actualWidth[i]; - }else{ - w = 10; - } - if( p->mode==MODE_Explain && azArg[i] && - strlen30(azArg[i])>w ){ - w = strlen30(azArg[i]); - } - fprintf(p->out,"%-*.*s%s",w,w, - azArg[i] ? azArg[i] : p->nullvalue, i==nArg-1 ? "\n": " "); - } - break; - } - case MODE_Semi: - case MODE_List: { - if( p->cnt++==0 && p->showHeader ){ - for(i=0; iout,"%s%s",azCol[i], i==nArg-1 ? "\n" : p->separator); - } - } - if( azArg==0 ) break; - for(i=0; inullvalue; - fprintf(p->out, "%s", z); - if( iout, "%s", p->separator); - }else if( p->mode==MODE_Semi ){ - fprintf(p->out, ";\n"); - }else{ - fprintf(p->out, "\n"); - } - } - break; - } - case MODE_Html: { - if( p->cnt++==0 && p->showHeader ){ - fprintf(p->out,""); - for(i=0; iout,""); - output_html_string(p->out, azCol[i]); - fprintf(p->out,"\n"); - } - fprintf(p->out,"\n"); - } - if( azArg==0 ) break; - fprintf(p->out,""); - for(i=0; iout,""); - output_html_string(p->out, azArg[i] ? azArg[i] : p->nullvalue); - fprintf(p->out,"\n"); - } - fprintf(p->out,"\n"); - break; - } - case MODE_Tcl: { - if( p->cnt++==0 && p->showHeader ){ - for(i=0; iout,azCol[i] ? azCol[i] : ""); - fprintf(p->out, "%s", p->separator); - } - fprintf(p->out,"\n"); - } - if( azArg==0 ) break; - for(i=0; iout, azArg[i] ? azArg[i] : p->nullvalue); - fprintf(p->out, "%s", p->separator); - } - fprintf(p->out,"\n"); - break; - } - case MODE_Csv: { - if( p->cnt++==0 && p->showHeader ){ - for(i=0; iout,"\n"); - } - if( azArg==0 ) break; - for(i=0; iout,"\n"); - break; - } - case MODE_Insert: { - p->cnt++; - if( azArg==0 ) break; - fprintf(p->out,"INSERT INTO %s VALUES(",p->zDestTable); - for(i=0; i0 ? ",": ""; - if( (azArg[i]==0) || (aiType && aiType[i]==SQLITE_NULL) ){ - fprintf(p->out,"%sNULL",zSep); - }else if( aiType && aiType[i]==SQLITE_TEXT ){ - if( zSep[0] ) fprintf(p->out,"%s",zSep); - output_quoted_string(p->out, azArg[i]); - }else if( aiType && (aiType[i]==SQLITE_INTEGER || aiType[i]==SQLITE_FLOAT) ){ - fprintf(p->out,"%s%s",zSep, azArg[i]); - }else if( aiType && aiType[i]==SQLITE_BLOB && p->pStmt ){ - const void *pBlob = sqlite3_column_blob(p->pStmt, i); - int nBlob = sqlite3_column_bytes(p->pStmt, i); - if( zSep[0] ) fprintf(p->out,"%s",zSep); - output_hex_blob(p->out, pBlob, nBlob); - }else if( isNumber(azArg[i], 0) ){ - fprintf(p->out,"%s%s",zSep, azArg[i]); - }else{ - if( zSep[0] ) fprintf(p->out,"%s",zSep); - output_quoted_string(p->out, azArg[i]); - } - } - fprintf(p->out,");\n"); - break; - } - } - return 0; -} - -/* -** This is the callback routine that the SQLite library -** invokes for each row of a query result. -*/ -static int callback(void *pArg, int nArg, char **azArg, char **azCol){ - /* since we don't have type info, call the shell_callback with a NULL value */ - return shell_callback(pArg, nArg, azArg, azCol, NULL); -} - -/* -** Set the destination table field of the callback_data structure to -** the name of the table given. Escape any quote characters in the -** table name. -*/ -static void set_table_name(struct callback_data *p, const char *zName){ - int i, n; - int needQuote; - char *z; - - if( p->zDestTable ){ - free(p->zDestTable); - p->zDestTable = 0; - } - if( zName==0 ) return; - needQuote = !isalpha((unsigned char)*zName) && *zName!='_'; - for(i=n=0; zName[i]; i++, n++){ - if( !isalnum((unsigned char)zName[i]) && zName[i]!='_' ){ - needQuote = 1; - if( zName[i]=='\'' ) n++; - } - } - if( needQuote ) n += 2; - z = p->zDestTable = malloc( n+1 ); - if( z==0 ){ - fprintf(stderr,"Error: out of memory\n"); - exit(1); - } - n = 0; - if( needQuote ) z[n++] = '\''; - for(i=0; zName[i]; i++){ - z[n++] = zName[i]; - if( zName[i]=='\'' ) z[n++] = '\''; - } - if( needQuote ) z[n++] = '\''; - z[n] = 0; -} - -/* zIn is either a pointer to a NULL-terminated string in memory obtained -** from malloc(), or a NULL pointer. The string pointed to by zAppend is -** added to zIn, and the result returned in memory obtained from malloc(). -** zIn, if it was not NULL, is freed. -** -** If the third argument, quote, is not '\0', then it is used as a -** quote character for zAppend. -*/ -static char *appendText(char *zIn, char const *zAppend, char quote){ - int len; - int i; - int nAppend = strlen30(zAppend); - int nIn = (zIn?strlen30(zIn):0); - - len = nAppend+nIn+1; - if( quote ){ - len += 2; - for(i=0; iechoOn ){ - const char *zStmtSql = sqlite3_sql(pStmt); - fprintf(pArg->out,"%s\n", zStmtSql ? zStmtSql : zSql); - } - - /* perform the first step. this will tell us if we - ** have a result set or not and how wide it is. - */ - rc = sqlite3_step(pStmt); - /* if we have a result set... */ - if( SQLITE_ROW == rc ){ - /* if we have a callback... */ - if( xCallback ){ - /* allocate space for col name ptr, value ptr, and type */ - int nCol = sqlite3_column_count(pStmt); - void *pData = sqlite3_malloc(3*nCol*sizeof(const char*) + 1); - if( !pData ){ - rc = SQLITE_NOMEM; - }else{ - char **azCols = (char **)pData; /* Names of result columns */ - char **azVals = &azCols[nCol]; /* Results */ - int *aiTypes = (int *)&azVals[nCol]; /* Result types */ - int i; - assert(sizeof(int) <= sizeof(char *)); - /* save off ptrs to column names */ - for(i=0; ipStmt = pStmt; - pArg->cnt = 0; - } - do{ - /* extract the data and data types */ - for(i=0; ipStmt = NULL; - } - } - }else{ - do{ - rc = sqlite3_step(pStmt); - } while( rc == SQLITE_ROW ); - } - } - - /* Finalize the statement just executed. If this fails, save a - ** copy of the error message. Otherwise, set zSql to point to the - ** next statement to execute. */ - rc = sqlite3_finalize(pStmt); - if( rc==SQLITE_OK ){ - zSql = zLeftover; - while( isspace(zSql[0]) ) zSql++; - }else if( pzErrMsg ){ - *pzErrMsg = save_err_msg(db); - } - } - } /* end while */ - - return rc; -} - - -/* -** This is a different callback routine used for dumping the database. -** Each row received by this callback consists of a table name, -** the table type ("index" or "table") and SQL to create the table. -** This routine should print text sufficient to recreate the table. -*/ -static int dump_callback(void *pArg, int nArg, char **azArg, char **azCol){ - int rc; - const char *zTable; - const char *zType; - const char *zSql; - const char *zPrepStmt = 0; - struct callback_data *p = (struct callback_data *)pArg; - - UNUSED_PARAMETER(azCol); - if( nArg!=3 ) return 1; - zTable = azArg[0]; - zType = azArg[1]; - zSql = azArg[2]; - - if( strcmp(zTable, "sqlite_sequence")==0 ){ - zPrepStmt = "DELETE FROM sqlite_sequence;\n"; - }else if( strcmp(zTable, "sqlite_stat1")==0 ){ - fprintf(p->out, "ANALYZE sqlite_master;\n"); - }else if( strncmp(zTable, "sqlite_", 7)==0 ){ - return 0; - }else if( strncmp(zSql, "CREATE VIRTUAL TABLE", 20)==0 ){ - char *zIns; - if( !p->writableSchema ){ - fprintf(p->out, "PRAGMA writable_schema=ON;\n"); - p->writableSchema = 1; - } - zIns = sqlite3_mprintf( - "INSERT INTO sqlite_master(type,name,tbl_name,rootpage,sql)" - "VALUES('table','%q','%q',0,'%q');", - zTable, zTable, zSql); - fprintf(p->out, "%s\n", zIns); - sqlite3_free(zIns); - return 0; - }else{ - fprintf(p->out, "%s;\n", zSql); - } - - if( strcmp(zType, "table")==0 ){ - sqlite3_stmt *pTableInfo = 0; - char *zSelect = 0; - char *zTableInfo = 0; - char *zTmp = 0; - int nRow = 0; - - zTableInfo = appendText(zTableInfo, "PRAGMA table_info(", 0); - zTableInfo = appendText(zTableInfo, zTable, '"'); - zTableInfo = appendText(zTableInfo, ");", 0); - - rc = sqlite3_prepare(p->db, zTableInfo, -1, &pTableInfo, 0); - free(zTableInfo); - if( rc!=SQLITE_OK || !pTableInfo ){ - return 1; - } - - zSelect = appendText(zSelect, "SELECT 'INSERT INTO ' || ", 0); - zTmp = appendText(zTmp, zTable, '"'); - if( zTmp ){ - zSelect = appendText(zSelect, zTmp, '\''); - } - zSelect = appendText(zSelect, " || ' VALUES(' || ", 0); - rc = sqlite3_step(pTableInfo); - while( rc==SQLITE_ROW ){ - const char *zText = (const char *)sqlite3_column_text(pTableInfo, 1); - zSelect = appendText(zSelect, "quote(", 0); - zSelect = appendText(zSelect, zText, '"'); - rc = sqlite3_step(pTableInfo); - if( rc==SQLITE_ROW ){ - zSelect = appendText(zSelect, ") || ',' || ", 0); - }else{ - zSelect = appendText(zSelect, ") ", 0); - } - nRow++; - } - rc = sqlite3_finalize(pTableInfo); - if( rc!=SQLITE_OK || nRow==0 ){ - free(zSelect); - return 1; - } - zSelect = appendText(zSelect, "|| ')' FROM ", 0); - zSelect = appendText(zSelect, zTable, '"'); - - rc = run_table_dump_query(p->out, p->db, zSelect, zPrepStmt); - if( rc==SQLITE_CORRUPT ){ - zSelect = appendText(zSelect, " ORDER BY rowid DESC", 0); - rc = run_table_dump_query(p->out, p->db, zSelect, 0); - } - if( zSelect ) free(zSelect); - } - return 0; -} - -/* -** Run zQuery. Use dump_callback() as the callback routine so that -** the contents of the query are output as SQL statements. -** -** If we get a SQLITE_CORRUPT error, rerun the query after appending -** "ORDER BY rowid DESC" to the end. -*/ -static int run_schema_dump_query( - struct callback_data *p, - const char *zQuery, - char **pzErrMsg -){ - int rc; - rc = sqlite3_exec(p->db, zQuery, dump_callback, p, pzErrMsg); - if( rc==SQLITE_CORRUPT ){ - char *zQ2; - int len = strlen30(zQuery); - if( pzErrMsg ) sqlite3_free(*pzErrMsg); - zQ2 = malloc( len+100 ); - if( zQ2==0 ) return rc; - sqlite3_snprintf(sizeof(zQ2), zQ2, "%s ORDER BY rowid DESC", zQuery); - rc = sqlite3_exec(p->db, zQ2, dump_callback, p, pzErrMsg); - free(zQ2); - } - return rc; -} - -/* -** Text of a help message -*/ -static char zHelp[] = - ".backup ?DB? FILE Backup DB (default \"main\") to FILE\n" - ".bail ON|OFF Stop after hitting an error. Default OFF\n" - ".databases List names and files of attached databases\n" - ".dump ?TABLE? ... Dump the database in an SQL text format\n" - " If TABLE specified, only dump tables matching\n" - " LIKE pattern TABLE.\n" - ".echo ON|OFF Turn command echo on or off\n" - ".exit Exit this program\n" - ".explain ?ON|OFF? Turn output mode suitable for EXPLAIN on or off.\n" - " With no args, it turns EXPLAIN on.\n" - ".header(s) ON|OFF Turn display of headers on or off\n" - ".help Show this message\n" - ".import FILE TABLE Import data from FILE into TABLE\n" - ".indices ?TABLE? Show names of all indices\n" - " If TABLE specified, only show indices for tables\n" - " matching LIKE pattern TABLE.\n" -#ifdef SQLITE_ENABLE_IOTRACE - ".iotrace FILE Enable I/O diagnostic logging to FILE\n" -#endif -#ifndef SQLITE_OMIT_LOAD_EXTENSION - ".load FILE ?ENTRY? Load an extension library\n" -#endif - ".log FILE|off Turn logging on or off. FILE can be stderr/stdout\n" - ".mode MODE ?TABLE? Set output mode where MODE is one of:\n" - " csv Comma-separated values\n" - " column Left-aligned columns. (See .width)\n" - " html HTML code\n" - " insert SQL insert statements for TABLE\n" - " line One value per line\n" - " list Values delimited by .separator string\n" - " tabs Tab-separated values\n" - " tcl TCL list elements\n" - ".nullvalue STRING Print STRING in place of NULL values\n" - ".output FILENAME Send output to FILENAME\n" - ".output stdout Send output to the screen\n" - ".prompt MAIN CONTINUE Replace the standard prompts\n" - ".quit Exit this program\n" - ".read FILENAME Execute SQL in FILENAME\n" - ".restore ?DB? FILE Restore content of DB (default \"main\") from FILE\n" - ".schema ?TABLE? Show the CREATE statements\n" - " If TABLE specified, only show tables matching\n" - " LIKE pattern TABLE.\n" - ".separator STRING Change separator used by output mode and .import\n" - ".show Show the current values for various settings\n" - ".tables ?TABLE? List names of tables\n" - " If TABLE specified, only list tables matching\n" - " LIKE pattern TABLE.\n" - ".timeout MS Try opening locked tables for MS milliseconds\n" - ".width NUM1 NUM2 ... Set column widths for \"column\" mode\n" -; - -static char zTimerHelp[] = - ".timer ON|OFF Turn the CPU timer measurement on or off\n" -; - -/* Forward reference */ -static int process_input(struct callback_data *p, FILE *in); - -/* -** Make sure the database is open. If it is not, then open it. If -** the database fails to open, print an error message and exit. -*/ -static void open_db(struct callback_data *p){ - if( p->db==0 ){ - sqlite3_open(p->zDbFilename, &p->db); - db = p->db; - if( db && sqlite3_errcode(db)==SQLITE_OK ){ - sqlite3_create_function(db, "shellstatic", 0, SQLITE_UTF8, 0, - shellstaticFunc, 0, 0); - } - if( db==0 || SQLITE_OK!=sqlite3_errcode(db) ){ - fprintf(stderr,"Error: unable to open database \"%s\": %s\n", - p->zDbFilename, sqlite3_errmsg(db)); - exit(1); - } -#ifndef SQLITE_OMIT_LOAD_EXTENSION - sqlite3_enable_load_extension(p->db, 1); -#endif - } -} - -/* -** Do C-language style dequoting. -** -** \t -> tab -** \n -> newline -** \r -> carriage return -** \NNN -> ascii character NNN in octal -** \\ -> backslash -*/ -static void resolve_backslashes(char *z){ - int i, j; - char c; - for(i=j=0; (c = z[i])!=0; i++, j++){ - if( c=='\\' ){ - c = z[++i]; - if( c=='n' ){ - c = '\n'; - }else if( c=='t' ){ - c = '\t'; - }else if( c=='r' ){ - c = '\r'; - }else if( c>='0' && c<='7' ){ - c -= '0'; - if( z[i+1]>='0' && z[i+1]<='7' ){ - i++; - c = (c<<3) + z[i] - '0'; - if( z[i+1]>='0' && z[i+1]<='7' ){ - i++; - c = (c<<3) + z[i] - '0'; - } - } - } - } - z[j] = c; - } - z[j] = 0; -} - -/* -** Interpret zArg as a boolean value. Return either 0 or 1. -*/ -static int booleanValue(char *zArg){ - int val = atoi(zArg); - int j; - for(j=0; zArg[j]; j++){ - zArg[j] = (char)tolower(zArg[j]); - } - if( strcmp(zArg,"on")==0 ){ - val = 1; - }else if( strcmp(zArg,"yes")==0 ){ - val = 1; - } - return val; -} - -/* -** If an input line begins with "." then invoke this routine to -** process that line. -** -** Return 1 on error, 2 to exit, and 0 otherwise. -*/ -static int do_meta_command(char *zLine, struct callback_data *p){ - int i = 1; - int nArg = 0; - int n, c; - int rc = 0; - char *azArg[50]; - - /* Parse the input line into tokens. - */ - while( zLine[i] && nArg=3 && strncmp(azArg[0], "backup", n)==0 && nArg>1 && nArg<4){ - const char *zDestFile; - const char *zDb; - sqlite3 *pDest; - sqlite3_backup *pBackup; - if( nArg==2 ){ - zDestFile = azArg[1]; - zDb = "main"; - }else{ - zDestFile = azArg[2]; - zDb = azArg[1]; - } - rc = sqlite3_open(zDestFile, &pDest); - if( rc!=SQLITE_OK ){ - fprintf(stderr, "Error: cannot open \"%s\"\n", zDestFile); - sqlite3_close(pDest); - return 1; - } - open_db(p); - pBackup = sqlite3_backup_init(pDest, "main", p->db, zDb); - if( pBackup==0 ){ - fprintf(stderr, "Error: %s\n", sqlite3_errmsg(pDest)); - sqlite3_close(pDest); - return 1; - } - while( (rc = sqlite3_backup_step(pBackup,100))==SQLITE_OK ){} - sqlite3_backup_finish(pBackup); - if( rc==SQLITE_DONE ){ - rc = 0; - }else{ - fprintf(stderr, "Error: %s\n", sqlite3_errmsg(pDest)); - rc = 1; - } - sqlite3_close(pDest); - }else - - if( c=='b' && n>=3 && strncmp(azArg[0], "bail", n)==0 && nArg>1 && nArg<3 ){ - bail_on_error = booleanValue(azArg[1]); - }else - - if( c=='d' && n>1 && strncmp(azArg[0], "databases", n)==0 && nArg==1 ){ - struct callback_data data; - char *zErrMsg = 0; - open_db(p); - memcpy(&data, p, sizeof(data)); - data.showHeader = 1; - data.mode = MODE_Column; - data.colWidth[0] = 3; - data.colWidth[1] = 15; - data.colWidth[2] = 58; - data.cnt = 0; - sqlite3_exec(p->db, "PRAGMA database_list; ", callback, &data, &zErrMsg); - if( zErrMsg ){ - fprintf(stderr,"Error: %s\n", zErrMsg); - sqlite3_free(zErrMsg); - rc = 1; - } - }else - - if( c=='d' && strncmp(azArg[0], "dump", n)==0 && nArg<3 ){ - char *zErrMsg = 0; - open_db(p); - /* When playing back a "dump", the content might appear in an order - ** which causes immediate foreign key constraints to be violated. - ** So disable foreign-key constraint enforcement to prevent problems. */ - fprintf(p->out, "PRAGMA foreign_keys=OFF;\n"); - fprintf(p->out, "BEGIN TRANSACTION;\n"); - p->writableSchema = 0; - sqlite3_exec(p->db, "PRAGMA writable_schema=ON", 0, 0, 0); - if( nArg==1 ){ - run_schema_dump_query(p, - "SELECT name, type, sql FROM sqlite_master " - "WHERE sql NOT NULL AND type=='table' AND name!='sqlite_sequence'", 0 - ); - run_schema_dump_query(p, - "SELECT name, type, sql FROM sqlite_master " - "WHERE name=='sqlite_sequence'", 0 - ); - run_table_dump_query(p->out, p->db, - "SELECT sql FROM sqlite_master " - "WHERE sql NOT NULL AND type IN ('index','trigger','view')", 0 - ); - }else{ - int i; - for(i=1; iout, p->db, - "SELECT sql FROM sqlite_master " - "WHERE sql NOT NULL" - " AND type IN ('index','trigger','view')" - " AND tbl_name LIKE shellstatic()", 0 - ); - zShellStatic = 0; - } - } - if( p->writableSchema ){ - fprintf(p->out, "PRAGMA writable_schema=OFF;\n"); - p->writableSchema = 0; - } - sqlite3_exec(p->db, "PRAGMA writable_schema=OFF", 0, 0, 0); - if( zErrMsg ){ - fprintf(stderr,"Error: %s\n", zErrMsg); - sqlite3_free(zErrMsg); - }else{ - fprintf(p->out, "COMMIT;\n"); - } - }else - - if( c=='e' && strncmp(azArg[0], "echo", n)==0 && nArg>1 && nArg<3 ){ - p->echoOn = booleanValue(azArg[1]); - }else - - if( c=='e' && strncmp(azArg[0], "exit", n)==0 && nArg==1 ){ - rc = 2; - }else - - if( c=='e' && strncmp(azArg[0], "explain", n)==0 && nArg<3 ){ - int val = nArg>=2 ? booleanValue(azArg[1]) : 1; - if(val == 1) { - if(!p->explainPrev.valid) { - p->explainPrev.valid = 1; - p->explainPrev.mode = p->mode; - p->explainPrev.showHeader = p->showHeader; - memcpy(p->explainPrev.colWidth,p->colWidth,sizeof(p->colWidth)); - } - /* We could put this code under the !p->explainValid - ** condition so that it does not execute if we are already in - ** explain mode. However, always executing it allows us an easy - ** was to reset to explain mode in case the user previously - ** did an .explain followed by a .width, .mode or .header - ** command. - */ - p->mode = MODE_Explain; - p->showHeader = 1; - memset(p->colWidth,0,ArraySize(p->colWidth)); - p->colWidth[0] = 4; /* addr */ - p->colWidth[1] = 13; /* opcode */ - p->colWidth[2] = 4; /* P1 */ - p->colWidth[3] = 4; /* P2 */ - p->colWidth[4] = 4; /* P3 */ - p->colWidth[5] = 13; /* P4 */ - p->colWidth[6] = 2; /* P5 */ - p->colWidth[7] = 13; /* Comment */ - }else if (p->explainPrev.valid) { - p->explainPrev.valid = 0; - p->mode = p->explainPrev.mode; - p->showHeader = p->explainPrev.showHeader; - memcpy(p->colWidth,p->explainPrev.colWidth,sizeof(p->colWidth)); - } - }else - - if( c=='h' && (strncmp(azArg[0], "header", n)==0 || - strncmp(azArg[0], "headers", n)==0) && nArg>1 && nArg<3 ){ - p->showHeader = booleanValue(azArg[1]); - }else - - if( c=='h' && strncmp(azArg[0], "help", n)==0 ){ - fprintf(stderr,"%s",zHelp); - if( HAS_TIMER ){ - fprintf(stderr,"%s",zTimerHelp); - } - }else - - if( c=='i' && strncmp(azArg[0], "import", n)==0 && nArg==3 ){ - char *zTable = azArg[2]; /* Insert data into this table */ - char *zFile = azArg[1]; /* The file from which to extract data */ - sqlite3_stmt *pStmt = NULL; /* A statement */ - int nCol; /* Number of columns in the table */ - int nByte; /* Number of bytes in an SQL string */ - int i, j; /* Loop counters */ - int nSep; /* Number of bytes in p->separator[] */ - char *zSql; /* An SQL statement */ - char *zLine; /* A single line of input from the file */ - char **azCol; /* zLine[] broken up into columns */ - char *zCommit; /* How to commit changes */ - FILE *in; /* The input file */ - int lineno = 0; /* Line number of input file */ - - open_db(p); - nSep = strlen30(p->separator); - if( nSep==0 ){ - fprintf(stderr, "Error: non-null separator required for import\n"); - return 1; - } - zSql = sqlite3_mprintf("SELECT * FROM '%q'", zTable); - if( zSql==0 ){ - fprintf(stderr, "Error: out of memory\n"); - return 1; - } - nByte = strlen30(zSql); - rc = sqlite3_prepare(p->db, zSql, -1, &pStmt, 0); - sqlite3_free(zSql); - if( rc ){ - if (pStmt) sqlite3_finalize(pStmt); - fprintf(stderr,"Error: %s\n", sqlite3_errmsg(db)); - return 1; - } - nCol = sqlite3_column_count(pStmt); - sqlite3_finalize(pStmt); - pStmt = 0; - if( nCol==0 ) return 0; /* no columns, no error */ - zSql = malloc( nByte + 20 + nCol*2 ); - if( zSql==0 ){ - fprintf(stderr, "Error: out of memory\n"); - return 1; - } - sqlite3_snprintf(nByte+20, zSql, "INSERT INTO '%q' VALUES(?", zTable); - j = strlen30(zSql); - for(i=1; idb, zSql, -1, &pStmt, 0); - free(zSql); - if( rc ){ - fprintf(stderr, "Error: %s\n", sqlite3_errmsg(db)); - if (pStmt) sqlite3_finalize(pStmt); - return 1; - } - in = fopen(zFile, "rb"); - if( in==0 ){ - fprintf(stderr, "Error: cannot open \"%s\"\n", zFile); - sqlite3_finalize(pStmt); - return 1; - } - azCol = malloc( sizeof(azCol[0])*(nCol+1) ); - if( azCol==0 ){ - fprintf(stderr, "Error: out of memory\n"); - fclose(in); - sqlite3_finalize(pStmt); - return 1; - } - sqlite3_exec(p->db, "BEGIN", 0, 0, 0); - zCommit = "COMMIT"; - while( (zLine = local_getline(0, in))!=0 ){ - char *z; - i = 0; - lineno++; - azCol[0] = zLine; - for(i=0, z=zLine; *z && *z!='\n' && *z!='\r'; z++){ - if( *z==p->separator[0] && strncmp(z, p->separator, nSep)==0 ){ - *z = 0; - i++; - if( idb, zCommit, 0, 0, 0); - }else - - if( c=='i' && strncmp(azArg[0], "indices", n)==0 && nArg<3 ){ - struct callback_data data; - char *zErrMsg = 0; - open_db(p); - memcpy(&data, p, sizeof(data)); - data.showHeader = 0; - data.mode = MODE_List; - if( nArg==1 ){ - rc = sqlite3_exec(p->db, - "SELECT name FROM sqlite_master " - "WHERE type='index' AND name NOT LIKE 'sqlite_%' " - "UNION ALL " - "SELECT name FROM sqlite_temp_master " - "WHERE type='index' " - "ORDER BY 1", - callback, &data, &zErrMsg - ); - }else{ - zShellStatic = azArg[1]; - rc = sqlite3_exec(p->db, - "SELECT name FROM sqlite_master " - "WHERE type='index' AND tbl_name LIKE shellstatic() " - "UNION ALL " - "SELECT name FROM sqlite_temp_master " - "WHERE type='index' AND tbl_name LIKE shellstatic() " - "ORDER BY 1", - callback, &data, &zErrMsg - ); - zShellStatic = 0; - } - if( zErrMsg ){ - fprintf(stderr,"Error: %s\n", zErrMsg); - sqlite3_free(zErrMsg); - rc = 1; - }else if( rc != SQLITE_OK ){ - fprintf(stderr,"Error: querying sqlite_master and sqlite_temp_master\n"); - rc = 1; - } - }else - -#ifdef SQLITE_ENABLE_IOTRACE - if( c=='i' && strncmp(azArg[0], "iotrace", n)==0 ){ - extern void (*sqlite3IoTrace)(const char*, ...); - if( iotrace && iotrace!=stdout ) fclose(iotrace); - iotrace = 0; - if( nArg<2 ){ - sqlite3IoTrace = 0; - }else if( strcmp(azArg[1], "-")==0 ){ - sqlite3IoTrace = iotracePrintf; - iotrace = stdout; - }else{ - iotrace = fopen(azArg[1], "w"); - if( iotrace==0 ){ - fprintf(stderr, "Error: cannot open \"%s\"\n", azArg[1]); - sqlite3IoTrace = 0; - rc = 1; - }else{ - sqlite3IoTrace = iotracePrintf; - } - } - }else -#endif - -#ifndef SQLITE_OMIT_LOAD_EXTENSION - if( c=='l' && strncmp(azArg[0], "load", n)==0 && nArg>=2 ){ - const char *zFile, *zProc; - char *zErrMsg = 0; - zFile = azArg[1]; - zProc = nArg>=3 ? azArg[2] : 0; - open_db(p); - rc = sqlite3_load_extension(p->db, zFile, zProc, &zErrMsg); - if( rc!=SQLITE_OK ){ - fprintf(stderr, "Error: %s\n", zErrMsg); - sqlite3_free(zErrMsg); - rc = 1; - } - }else -#endif - - if( c=='l' && strncmp(azArg[0], "log", n)==0 && nArg>=1 ){ - const char *zFile = azArg[1]; - if( p->pLog && p->pLog!=stdout && p->pLog!=stderr ){ - fclose(p->pLog); - p->pLog = 0; - } - if( strcmp(zFile,"stdout")==0 ){ - p->pLog = stdout; - }else if( strcmp(zFile, "stderr")==0 ){ - p->pLog = stderr; - }else if( strcmp(zFile, "off")==0 ){ - p->pLog = 0; - }else{ - p->pLog = fopen(zFile, "w"); - if( p->pLog==0 ){ - fprintf(stderr, "Error: cannot open \"%s\"\n", zFile); - } - } - }else - - if( c=='m' && strncmp(azArg[0], "mode", n)==0 && nArg==2 ){ - int n2 = strlen30(azArg[1]); - if( (n2==4 && strncmp(azArg[1],"line",n2)==0) - || - (n2==5 && strncmp(azArg[1],"lines",n2)==0) ){ - p->mode = MODE_Line; - }else if( (n2==6 && strncmp(azArg[1],"column",n2)==0) - || - (n2==7 && strncmp(azArg[1],"columns",n2)==0) ){ - p->mode = MODE_Column; - }else if( n2==4 && strncmp(azArg[1],"list",n2)==0 ){ - p->mode = MODE_List; - }else if( n2==4 && strncmp(azArg[1],"html",n2)==0 ){ - p->mode = MODE_Html; - }else if( n2==3 && strncmp(azArg[1],"tcl",n2)==0 ){ - p->mode = MODE_Tcl; - }else if( n2==3 && strncmp(azArg[1],"csv",n2)==0 ){ - p->mode = MODE_Csv; - sqlite3_snprintf(sizeof(p->separator), p->separator, ","); - }else if( n2==4 && strncmp(azArg[1],"tabs",n2)==0 ){ - p->mode = MODE_List; - sqlite3_snprintf(sizeof(p->separator), p->separator, "\t"); - }else if( n2==6 && strncmp(azArg[1],"insert",n2)==0 ){ - p->mode = MODE_Insert; - set_table_name(p, "table"); - }else { - fprintf(stderr,"Error: mode should be one of: " - "column csv html insert line list tabs tcl\n"); - rc = 1; - } - }else - - if( c=='m' && strncmp(azArg[0], "mode", n)==0 && nArg==3 ){ - int n2 = strlen30(azArg[1]); - if( n2==6 && strncmp(azArg[1],"insert",n2)==0 ){ - p->mode = MODE_Insert; - set_table_name(p, azArg[2]); - }else { - fprintf(stderr, "Error: invalid arguments: " - " \"%s\". Enter \".help\" for help\n", azArg[2]); - rc = 1; - } - }else - - if( c=='n' && strncmp(azArg[0], "nullvalue", n)==0 && nArg==2 ) { - sqlite3_snprintf(sizeof(p->nullvalue), p->nullvalue, - "%.*s", (int)ArraySize(p->nullvalue)-1, azArg[1]); - }else - - if( c=='o' && strncmp(azArg[0], "output", n)==0 && nArg==2 ){ - if( p->out!=stdout ){ - fclose(p->out); - } - if( strcmp(azArg[1],"stdout")==0 ){ - p->out = stdout; - sqlite3_snprintf(sizeof(p->outfile), p->outfile, "stdout"); - }else{ - p->out = fopen(azArg[1], "wb"); - if( p->out==0 ){ - fprintf(stderr,"Error: cannot write to \"%s\"\n", azArg[1]); - p->out = stdout; - rc = 1; - } else { - sqlite3_snprintf(sizeof(p->outfile), p->outfile, "%s", azArg[1]); - } - } - }else - - if( c=='p' && strncmp(azArg[0], "prompt", n)==0 && (nArg==2 || nArg==3)){ - if( nArg >= 2) { - strncpy(mainPrompt,azArg[1],(int)ArraySize(mainPrompt)-1); - } - if( nArg >= 3) { - strncpy(continuePrompt,azArg[2],(int)ArraySize(continuePrompt)-1); - } - }else - - if( c=='q' && strncmp(azArg[0], "quit", n)==0 && nArg==1 ){ - rc = 2; - }else - - if( c=='r' && n>=3 && strncmp(azArg[0], "read", n)==0 && nArg==2 ){ - FILE *alt = fopen(azArg[1], "rb"); - if( alt==0 ){ - fprintf(stderr,"Error: cannot open \"%s\"\n", azArg[1]); - rc = 1; - }else{ - rc = process_input(p, alt); - fclose(alt); - } - }else - - if( c=='r' && n>=3 && strncmp(azArg[0], "restore", n)==0 && nArg>1 && nArg<4){ - const char *zSrcFile; - const char *zDb; - sqlite3 *pSrc; - sqlite3_backup *pBackup; - int nTimeout = 0; - - if( nArg==2 ){ - zSrcFile = azArg[1]; - zDb = "main"; - }else{ - zSrcFile = azArg[2]; - zDb = azArg[1]; - } - rc = sqlite3_open(zSrcFile, &pSrc); - if( rc!=SQLITE_OK ){ - fprintf(stderr, "Error: cannot open \"%s\"\n", zSrcFile); - sqlite3_close(pSrc); - return 1; - } - open_db(p); - pBackup = sqlite3_backup_init(p->db, zDb, pSrc, "main"); - if( pBackup==0 ){ - fprintf(stderr, "Error: %s\n", sqlite3_errmsg(p->db)); - sqlite3_close(pSrc); - return 1; - } - while( (rc = sqlite3_backup_step(pBackup,100))==SQLITE_OK - || rc==SQLITE_BUSY ){ - if( rc==SQLITE_BUSY ){ - if( nTimeout++ >= 3 ) break; - sqlite3_sleep(100); - } - } - sqlite3_backup_finish(pBackup); - if( rc==SQLITE_DONE ){ - rc = 0; - }else if( rc==SQLITE_BUSY || rc==SQLITE_LOCKED ){ - fprintf(stderr, "Error: source database is busy\n"); - rc = 1; - }else{ - fprintf(stderr, "Error: %s\n", sqlite3_errmsg(p->db)); - rc = 1; - } - sqlite3_close(pSrc); - }else - - if( c=='s' && strncmp(azArg[0], "schema", n)==0 && nArg<3 ){ - struct callback_data data; - char *zErrMsg = 0; - open_db(p); - memcpy(&data, p, sizeof(data)); - data.showHeader = 0; - data.mode = MODE_Semi; - if( nArg>1 ){ - int i; - for(i=0; azArg[1][i]; i++) azArg[1][i] = (char)tolower(azArg[1][i]); - if( strcmp(azArg[1],"sqlite_master")==0 ){ - char *new_argv[2], *new_colv[2]; - new_argv[0] = "CREATE TABLE sqlite_master (\n" - " type text,\n" - " name text,\n" - " tbl_name text,\n" - " rootpage integer,\n" - " sql text\n" - ")"; - new_argv[1] = 0; - new_colv[0] = "sql"; - new_colv[1] = 0; - callback(&data, 1, new_argv, new_colv); - rc = SQLITE_OK; - }else if( strcmp(azArg[1],"sqlite_temp_master")==0 ){ - char *new_argv[2], *new_colv[2]; - new_argv[0] = "CREATE TEMP TABLE sqlite_temp_master (\n" - " type text,\n" - " name text,\n" - " tbl_name text,\n" - " rootpage integer,\n" - " sql text\n" - ")"; - new_argv[1] = 0; - new_colv[0] = "sql"; - new_colv[1] = 0; - callback(&data, 1, new_argv, new_colv); - rc = SQLITE_OK; - }else{ - zShellStatic = azArg[1]; - rc = sqlite3_exec(p->db, - "SELECT sql FROM " - " (SELECT sql sql, type type, tbl_name tbl_name, name name" - " FROM sqlite_master UNION ALL" - " SELECT sql, type, tbl_name, name FROM sqlite_temp_master) " - "WHERE tbl_name LIKE shellstatic() AND type!='meta' AND sql NOTNULL " - "ORDER BY substr(type,2,1), name", - callback, &data, &zErrMsg); - zShellStatic = 0; - } - }else{ - rc = sqlite3_exec(p->db, - "SELECT sql FROM " - " (SELECT sql sql, type type, tbl_name tbl_name, name name" - " FROM sqlite_master UNION ALL" - " SELECT sql, type, tbl_name, name FROM sqlite_temp_master) " - "WHERE type!='meta' AND sql NOTNULL AND name NOT LIKE 'sqlite_%'" - "ORDER BY substr(type,2,1), name", - callback, &data, &zErrMsg - ); - } - if( zErrMsg ){ - fprintf(stderr,"Error: %s\n", zErrMsg); - sqlite3_free(zErrMsg); - rc = 1; - }else if( rc != SQLITE_OK ){ - fprintf(stderr,"Error: querying schema information\n"); - rc = 1; - }else{ - rc = 0; - } - }else - - if( c=='s' && strncmp(azArg[0], "separator", n)==0 && nArg==2 ){ - sqlite3_snprintf(sizeof(p->separator), p->separator, - "%.*s", (int)sizeof(p->separator)-1, azArg[1]); - }else - - if( c=='s' && strncmp(azArg[0], "show", n)==0 && nArg==1 ){ - int i; - fprintf(p->out,"%9.9s: %s\n","echo", p->echoOn ? "on" : "off"); - fprintf(p->out,"%9.9s: %s\n","explain", p->explainPrev.valid ? "on" :"off"); - fprintf(p->out,"%9.9s: %s\n","headers", p->showHeader ? "on" : "off"); - fprintf(p->out,"%9.9s: %s\n","mode", modeDescr[p->mode]); - fprintf(p->out,"%9.9s: ", "nullvalue"); - output_c_string(p->out, p->nullvalue); - fprintf(p->out, "\n"); - fprintf(p->out,"%9.9s: %s\n","output", - strlen30(p->outfile) ? p->outfile : "stdout"); - fprintf(p->out,"%9.9s: ", "separator"); - output_c_string(p->out, p->separator); - fprintf(p->out, "\n"); - fprintf(p->out,"%9.9s: ","width"); - for (i=0;i<(int)ArraySize(p->colWidth) && p->colWidth[i] != 0;i++) { - fprintf(p->out,"%d ",p->colWidth[i]); - } - fprintf(p->out,"\n"); - }else - - if( c=='t' && n>1 && strncmp(azArg[0], "tables", n)==0 && nArg<3 ){ - char **azResult; - int nRow; - char *zErrMsg; - open_db(p); - if( nArg==1 ){ - rc = sqlite3_get_table(p->db, - "SELECT name FROM sqlite_master " - "WHERE type IN ('table','view') AND name NOT LIKE 'sqlite_%' " - "UNION ALL " - "SELECT name FROM sqlite_temp_master " - "WHERE type IN ('table','view') " - "ORDER BY 1", - &azResult, &nRow, 0, &zErrMsg - ); - }else{ - zShellStatic = azArg[1]; - rc = sqlite3_get_table(p->db, - "SELECT name FROM sqlite_master " - "WHERE type IN ('table','view') AND name LIKE shellstatic() " - "UNION ALL " - "SELECT name FROM sqlite_temp_master " - "WHERE type IN ('table','view') AND name LIKE shellstatic() " - "ORDER BY 1", - &azResult, &nRow, 0, &zErrMsg - ); - zShellStatic = 0; - } - if( zErrMsg ){ - fprintf(stderr,"Error: %s\n", zErrMsg); - sqlite3_free(zErrMsg); - rc = 1; - }else if( rc != SQLITE_OK ){ - fprintf(stderr,"Error: querying sqlite_master and sqlite_temp_master\n"); - rc = 1; - }else{ - int len, maxlen = 0; - int i, j; - int nPrintCol, nPrintRow; - for(i=1; i<=nRow; i++){ - if( azResult[i]==0 ) continue; - len = strlen30(azResult[i]); - if( len>maxlen ) maxlen = len; - } - nPrintCol = 80/(maxlen+2); - if( nPrintCol<1 ) nPrintCol = 1; - nPrintRow = (nRow + nPrintCol - 1)/nPrintCol; - for(i=0; i4 && strncmp(azArg[0], "timeout", n)==0 && nArg==2 ){ - open_db(p); - sqlite3_busy_timeout(p->db, atoi(azArg[1])); - }else - - if( HAS_TIMER && c=='t' && n>=5 && strncmp(azArg[0], "timer", n)==0 && nArg==2 ){ - enableTimer = booleanValue(azArg[1]); - }else - - if( c=='w' && strncmp(azArg[0], "width", n)==0 && nArg>1 ){ - int j; - assert( nArg<=ArraySize(azArg) ); - for(j=1; jcolWidth); j++){ - p->colWidth[j-1] = atoi(azArg[j]); - } - }else - - { - fprintf(stderr, "Error: unknown command or invalid arguments: " - " \"%s\". Enter \".help\" for help\n", azArg[0]); - rc = 1; - } - - return rc; -} - -/* -** Return TRUE if a semicolon occurs anywhere in the first N characters -** of string z[]. -*/ -static int _contains_semicolon(const char *z, int N){ - int i; - for(i=0; iout); - free(zLine); - zLine = one_input_line(zSql, in); - if( zLine==0 ){ - break; /* We have reached EOF */ - } - if( seenInterrupt ){ - if( in!=0 ) break; - seenInterrupt = 0; - } - lineno++; - if( (zSql==0 || zSql[0]==0) && _all_whitespace(zLine) ) continue; - if( zLine && zLine[0]=='.' && nSql==0 ){ - if( p->echoOn ) printf("%s\n", zLine); - rc = do_meta_command(zLine, p); - if( rc==2 ){ /* exit requested */ - break; - }else if( rc ){ - errCnt++; - } - continue; - } - if( _is_command_terminator(zLine) && _is_complete(zSql, nSql) ){ - memcpy(zLine,";",2); - } - nSqlPrior = nSql; - if( zSql==0 ){ - int i; - for(i=0; zLine[i] && isspace((unsigned char)zLine[i]); i++){} - if( zLine[i]!=0 ){ - nSql = strlen30(zLine); - zSql = malloc( nSql+3 ); - if( zSql==0 ){ - fprintf(stderr, "Error: out of memory\n"); - exit(1); - } - memcpy(zSql, zLine, nSql+1); - startline = lineno; - } - }else{ - int len = strlen30(zLine); - zSql = realloc( zSql, nSql + len + 4 ); - if( zSql==0 ){ - fprintf(stderr,"Error: out of memory\n"); - exit(1); - } - zSql[nSql++] = '\n'; - memcpy(&zSql[nSql], zLine, len+1); - nSql += len; - } - if( zSql && _contains_semicolon(&zSql[nSqlPrior], nSql-nSqlPrior) - && sqlite3_complete(zSql) ){ - p->cnt = 0; - open_db(p); - BEGIN_TIMER; - rc = shell_exec(p->db, zSql, shell_callback, p, &zErrMsg); - END_TIMER; - if( rc || zErrMsg ){ - char zPrefix[100]; - if( in!=0 || !stdin_is_interactive ){ - sqlite3_snprintf(sizeof(zPrefix), zPrefix, - "Error: near line %d:", startline); - }else{ - sqlite3_snprintf(sizeof(zPrefix), zPrefix, "Error:"); - } - if( zErrMsg!=0 ){ - fprintf(stderr, "%s %s\n", zPrefix, zErrMsg); - sqlite3_free(zErrMsg); - zErrMsg = 0; - }else{ - fprintf(stderr, "%s %s\n", zPrefix, sqlite3_errmsg(p->db)); - } - errCnt++; - } - free(zSql); - zSql = 0; - nSql = 0; - } - } - if( zSql ){ - if( !_all_whitespace(zSql) ) fprintf(stderr, "Error: incomplete SQL: %s\n", zSql); - free(zSql); - } - free(zLine); - return errCnt; -} - -/* -** Return a pathname which is the user's home directory. A -** 0 return indicates an error of some kind. Space to hold the -** resulting string is obtained from malloc(). The calling -** function should free the result. -*/ -static char *find_home_dir(void){ - char *home_dir = NULL; - -#if !defined(_WIN32) && !defined(WIN32) && !defined(__OS2__) && !defined(_WIN32_WCE) && !defined(__RTP__) && !defined(_WRS_KERNEL) - struct passwd *pwent; - uid_t uid = getuid(); - if( (pwent=getpwuid(uid)) != NULL) { - home_dir = pwent->pw_dir; - } -#endif - -#if defined(_WIN32_WCE) - /* Windows CE (arm-wince-mingw32ce-gcc) does not provide getenv() - */ - home_dir = strdup("/"); -#else - -#if defined(_WIN32) || defined(WIN32) || defined(__OS2__) - if (!home_dir) { - home_dir = getenv("USERPROFILE"); - } -#endif - - if (!home_dir) { - home_dir = getenv("HOME"); - } - -#if defined(_WIN32) || defined(WIN32) || defined(__OS2__) - if (!home_dir) { - char *zDrive, *zPath; - int n; - zDrive = getenv("HOMEDRIVE"); - zPath = getenv("HOMEPATH"); - if( zDrive && zPath ){ - n = strlen30(zDrive) + strlen30(zPath) + 1; - home_dir = malloc( n ); - if( home_dir==0 ) return 0; - sqlite3_snprintf(n, home_dir, "%s%s", zDrive, zPath); - return home_dir; - } - home_dir = "c:\\"; - } -#endif - -#endif /* !_WIN32_WCE */ - - if( home_dir ){ - int n = strlen30(home_dir) + 1; - char *z = malloc( n ); - if( z ) memcpy(z, home_dir, n); - home_dir = z; - } - - return home_dir; -} - -/* -** Read input from the file given by sqliterc_override. Or if that -** parameter is NULL, take input from ~/.sqliterc -** -** Returns the number of errors. -*/ -static int process_sqliterc( - struct callback_data *p, /* Configuration data */ - const char *sqliterc_override /* Name of config file. NULL to use default */ -){ - char *home_dir = NULL; - const char *sqliterc = sqliterc_override; - char *zBuf = 0; - FILE *in = NULL; - int nBuf; - int rc = 0; - - if (sqliterc == NULL) { - home_dir = find_home_dir(); - if( home_dir==0 ){ -#if !defined(__RTP__) && !defined(_WRS_KERNEL) - fprintf(stderr,"%s: Error: cannot locate your home directory\n", Argv0); -#endif - return 1; - } - nBuf = strlen30(home_dir) + 16; - zBuf = malloc( nBuf ); - if( zBuf==0 ){ - fprintf(stderr,"%s: Error: out of memory\n",Argv0); - return 1; - } - sqlite3_snprintf(nBuf, zBuf,"%s/.sqliterc",home_dir); - free(home_dir); - sqliterc = (const char*)zBuf; - } - in = fopen(sqliterc,"rb"); - if( in ){ - if( stdin_is_interactive ){ - fprintf(stderr,"-- Loading resources from %s\n",sqliterc); - } - rc = process_input(p,in); - fclose(in); - } - free(zBuf); - return rc; -} - -/* -** Show available command line options -*/ -static const char zOptions[] = - " -help show this message\n" - " -init filename read/process named file\n" - " -echo print commands before execution\n" - " -[no]header turn headers on or off\n" - " -bail stop after hitting an error\n" - " -interactive force interactive I/O\n" - " -batch force batch I/O\n" - " -column set output mode to 'column'\n" - " -csv set output mode to 'csv'\n" - " -html set output mode to HTML\n" - " -line set output mode to 'line'\n" - " -list set output mode to 'list'\n" - " -separator 'x' set output field separator (|)\n" - " -nullvalue 'text' set text string for NULL values\n" - " -version show SQLite version\n" -; -static void usage(int showDetail){ - fprintf(stderr, - "Usage: %s [OPTIONS] FILENAME [SQL]\n" - "FILENAME is the name of an SQLite database. A new database is created\n" - "if the file does not previously exist.\n", Argv0); - if( showDetail ){ - fprintf(stderr, "OPTIONS include:\n%s", zOptions); - }else{ - fprintf(stderr, "Use the -help option for additional information\n"); - } - exit(1); -} - -/* -** Initialize the state information in data -*/ -static void main_init(struct callback_data *data) { - memset(data, 0, sizeof(*data)); - data->mode = MODE_List; - memcpy(data->separator,"|", 2); - data->showHeader = 0; - sqlite3_config(SQLITE_CONFIG_LOG, shellLog, data); - sqlite3_snprintf(sizeof(mainPrompt), mainPrompt,"sqlite> "); - sqlite3_snprintf(sizeof(continuePrompt), continuePrompt," ...> "); - sqlite3_config(SQLITE_CONFIG_SINGLETHREAD); -} - -int main(int argc, char **argv){ - char *zErrMsg = 0; - struct callback_data data; - const char *zInitFile = 0; - char *zFirstCmd = 0; - int i; - int rc = 0; - - Argv0 = argv[0]; - main_init(&data); - stdin_is_interactive = isatty(0); - - /* Make sure we have a valid signal handler early, before anything - ** else is done. - */ -#ifdef SIGINT - signal(SIGINT, interrupt_handler); -#endif - - /* Do an initial pass through the command-line argument to locate - ** the name of the database file, the name of the initialization file, - ** and the first command to execute. - */ - for(i=1; i0 ){ - return rc; - } - - /* Make a second pass through the command-line argument and set - ** options. This second pass is delayed until after the initialization - ** file is processed so that the command-line arguments will override - ** settings in the initialization file. - */ - for(i=1; i=argc){ - fprintf(stderr,"%s: Error: missing argument for option: %s\n", Argv0, z); - fprintf(stderr,"Use -help for a list of options.\n"); - return 1; - } - sqlite3_snprintf(sizeof(data.separator), data.separator, - "%.*s",(int)sizeof(data.separator)-1,argv[i]); - }else if( strcmp(z,"-nullvalue")==0 ){ - i++; - if(i>=argc){ - fprintf(stderr,"%s: Error: missing argument for option: %s\n", Argv0, z); - fprintf(stderr,"Use -help for a list of options.\n"); - return 1; - } - sqlite3_snprintf(sizeof(data.nullvalue), data.nullvalue, - "%.*s",(int)sizeof(data.nullvalue)-1,argv[i]); - }else if( strcmp(z,"-header")==0 ){ - data.showHeader = 1; - }else if( strcmp(z,"-noheader")==0 ){ - data.showHeader = 0; - }else if( strcmp(z,"-echo")==0 ){ - data.echoOn = 1; - }else if( strcmp(z,"-bail")==0 ){ - bail_on_error = 1; - }else if( strcmp(z,"-version")==0 ){ - printf("%s\n", sqlite3_libversion()); - return 0; - }else if( strcmp(z,"-interactive")==0 ){ - stdin_is_interactive = 1; - }else if( strcmp(z,"-batch")==0 ){ - stdin_is_interactive = 0; - }else if( strcmp(z,"-help")==0 || strcmp(z, "--help")==0 ){ - usage(1); - }else{ - fprintf(stderr,"%s: Error: unknown option: %s\n", Argv0, z); - fprintf(stderr,"Use -help for a list of options.\n"); - return 1; - } - } - - if( zFirstCmd ){ - /* Run just the command that follows the database name - */ - if( zFirstCmd[0]=='.' ){ - rc = do_meta_command(zFirstCmd, &data); - return rc; - }else{ - open_db(&data); - rc = shell_exec(data.db, zFirstCmd, shell_callback, &data, &zErrMsg); - if( zErrMsg!=0 ){ - fprintf(stderr,"Error: %s\n", zErrMsg); - return rc!=0 ? rc : 1; - }else if( rc!=0 ){ - fprintf(stderr,"Error: unable to process SQL \"%s\"\n", zFirstCmd); - return rc; - } - } - }else{ - /* Run commands received from standard input - */ - if( stdin_is_interactive ){ - char *zHome; - char *zHistory = 0; - int nHistory; - printf( - "SQLite version %s\n" - "Enter \".help\" for instructions\n" - "Enter SQL statements terminated with a \";\"\n", - sqlite3_libversion() - ); - zHome = find_home_dir(); - if( zHome ){ - nHistory = strlen30(zHome) + 20; - if( (zHistory = malloc(nHistory))!=0 ){ - sqlite3_snprintf(nHistory, zHistory,"%s/.sqlite_history", zHome); - } - } -#if defined(HAVE_READLINE) && HAVE_READLINE==1 - if( zHistory ) read_history(zHistory); -#endif - rc = process_input(&data, 0); - if( zHistory ){ - stifle_history(100); - write_history(zHistory); - free(zHistory); - } - free(zHome); - }else{ - rc = process_input(&data, stdin); - } - } - set_table_name(&data, 0); - if( db ){ - if( sqlite3_close(db)!=SQLITE_OK ){ - fprintf(stderr,"Error: cannot close database \"%s\"\n", sqlite3_errmsg(db)); - rc++; - } - } - return rc; -} diff --git a/win64/sqlite/sqlite3.c b/win64/sqlite/sqlite3.c deleted file mode 100644 index 4db4846..0000000 --- a/win64/sqlite/sqlite3.c +++ /dev/null @@ -1,112444 +0,0 @@ -/****************************************************************************** -** This file is an amalgamation of many separate C source files from SQLite -** version 3.6.23.1. By combining all the individual C code files into this -** single large file, the entire code can be compiled as a one translation -** unit. This allows many compilers to do optimizations that would not be -** possible if the files were compiled separately. Performance improvements -** of 5% are more are commonly seen when SQLite is compiled as a single -** translation unit. -** -** This file is all you need to compile SQLite. To use SQLite in other -** programs, you need this file and the "sqlite3.h" header file that defines -** the programming interface to the SQLite library. (If you do not have -** the "sqlite3.h" header file at hand, you will find a copy embedded within -** the text of this file. Search for "Begin file sqlite3.h" to find the start -** of the embedded sqlite3.h header file.) Additional code files may be needed -** if you want a wrapper to interface SQLite with your choice of programming -** language. The code for the "sqlite3" command-line shell is also in a -** separate file. This file contains only code for the core SQLite library. -*/ -#define SQLITE_CORE 1 -#define SQLITE_AMALGAMATION 1 -#ifndef SQLITE_PRIVATE -# define SQLITE_PRIVATE static -#endif -#ifndef SQLITE_API -# define SQLITE_API -#endif -/************** Begin file sqliteInt.h ***************************************/ -/* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** Internal interface definitions for SQLite. -** -*/ -#ifndef _SQLITEINT_H_ -#define _SQLITEINT_H_ - -/* -** These #defines should enable >2GB file support on POSIX if the -** underlying operating system supports it. If the OS lacks -** large file support, or if the OS is windows, these should be no-ops. -** -** Ticket #2739: The _LARGEFILE_SOURCE macro must appear before any -** system #includes. Hence, this block of code must be the very first -** code in all source files. -** -** Large file support can be disabled using the -DSQLITE_DISABLE_LFS switch -** on the compiler command line. This is necessary if you are compiling -** on a recent machine (ex: Red Hat 7.2) but you want your code to work -** on an older machine (ex: Red Hat 6.0). If you compile on Red Hat 7.2 -** without this option, LFS is enable. But LFS does not exist in the kernel -** in Red Hat 6.0, so the code won't work. Hence, for maximum binary -** portability you should omit LFS. -** -** Similar is true for Mac OS X. LFS is only supported on Mac OS X 9 and later. -*/ -#ifndef SQLITE_DISABLE_LFS -# define _LARGE_FILE 1 -# ifndef _FILE_OFFSET_BITS -# define _FILE_OFFSET_BITS 64 -# endif -# define _LARGEFILE_SOURCE 1 -#endif - -/* -** Include the configuration header output by 'configure' if we're using the -** autoconf-based build -*/ -#ifdef _HAVE_SQLITE_CONFIG_H -#include "config.h" -#endif - -/************** Include sqliteLimit.h in the middle of sqliteInt.h ***********/ -/************** Begin file sqliteLimit.h *************************************/ -/* -** 2007 May 7 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** -** This file defines various limits of what SQLite can process. -*/ - -/* -** The maximum length of a TEXT or BLOB in bytes. This also -** limits the size of a row in a table or index. -** -** The hard limit is the ability of a 32-bit signed integer -** to count the size: 2^31-1 or 2147483647. -*/ -#ifndef SQLITE_MAX_LENGTH -# define SQLITE_MAX_LENGTH 1000000000 -#endif - -/* -** This is the maximum number of -** -** * Columns in a table -** * Columns in an index -** * Columns in a view -** * Terms in the SET clause of an UPDATE statement -** * Terms in the result set of a SELECT statement -** * Terms in the GROUP BY or ORDER BY clauses of a SELECT statement. -** * Terms in the VALUES clause of an INSERT statement -** -** The hard upper limit here is 32676. Most database people will -** tell you that in a well-normalized database, you usually should -** not have more than a dozen or so columns in any table. And if -** that is the case, there is no point in having more than a few -** dozen values in any of the other situations described above. -*/ -#ifndef SQLITE_MAX_COLUMN -# define SQLITE_MAX_COLUMN 2000 -#endif - -/* -** The maximum length of a single SQL statement in bytes. -** -** It used to be the case that setting this value to zero would -** turn the limit off. That is no longer true. It is not possible -** to turn this limit off. -*/ -#ifndef SQLITE_MAX_SQL_LENGTH -# define SQLITE_MAX_SQL_LENGTH 1000000000 -#endif - -/* -** The maximum depth of an expression tree. This is limited to -** some extent by SQLITE_MAX_SQL_LENGTH. But sometime you might -** want to place more severe limits on the complexity of an -** expression. -** -** A value of 0 used to mean that the limit was not enforced. -** But that is no longer true. The limit is now strictly enforced -** at all times. -*/ -#ifndef SQLITE_MAX_EXPR_DEPTH -# define SQLITE_MAX_EXPR_DEPTH 1000 -#endif - -/* -** The maximum number of terms in a compound SELECT statement. -** The code generator for compound SELECT statements does one -** level of recursion for each term. A stack overflow can result -** if the number of terms is too large. In practice, most SQL -** never has more than 3 or 4 terms. Use a value of 0 to disable -** any limit on the number of terms in a compount SELECT. -*/ -#ifndef SQLITE_MAX_COMPOUND_SELECT -# define SQLITE_MAX_COMPOUND_SELECT 500 -#endif - -/* -** The maximum number of opcodes in a VDBE program. -** Not currently enforced. -*/ -#ifndef SQLITE_MAX_VDBE_OP -# define SQLITE_MAX_VDBE_OP 25000 -#endif - -/* -** The maximum number of arguments to an SQL function. -*/ -#ifndef SQLITE_MAX_FUNCTION_ARG -# define SQLITE_MAX_FUNCTION_ARG 127 -#endif - -/* -** The maximum number of in-memory pages to use for the main database -** table and for temporary tables. The SQLITE_DEFAULT_CACHE_SIZE -*/ -#ifndef SQLITE_DEFAULT_CACHE_SIZE -# define SQLITE_DEFAULT_CACHE_SIZE 2000 -#endif -#ifndef SQLITE_DEFAULT_TEMP_CACHE_SIZE -# define SQLITE_DEFAULT_TEMP_CACHE_SIZE 500 -#endif - -/* -** The maximum number of attached databases. This must be between 0 -** and 30. The upper bound on 30 is because a 32-bit integer bitmap -** is used internally to track attached databases. -*/ -#ifndef SQLITE_MAX_ATTACHED -# define SQLITE_MAX_ATTACHED 10 -#endif - - -/* -** The maximum value of a ?nnn wildcard that the parser will accept. -*/ -#ifndef SQLITE_MAX_VARIABLE_NUMBER -# define SQLITE_MAX_VARIABLE_NUMBER 999 -#endif - -/* Maximum page size. The upper bound on this value is 32768. This a limit -** imposed by the necessity of storing the value in a 2-byte unsigned integer -** and the fact that the page size must be a power of 2. -** -** If this limit is changed, then the compiled library is technically -** incompatible with an SQLite library compiled with a different limit. If -** a process operating on a database with a page-size of 65536 bytes -** crashes, then an instance of SQLite compiled with the default page-size -** limit will not be able to rollback the aborted transaction. This could -** lead to database corruption. -*/ -#ifndef SQLITE_MAX_PAGE_SIZE -# define SQLITE_MAX_PAGE_SIZE 32768 -#endif - - -/* -** The default size of a database page. -*/ -#ifndef SQLITE_DEFAULT_PAGE_SIZE -# define SQLITE_DEFAULT_PAGE_SIZE 1024 -#endif -#if SQLITE_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE -# undef SQLITE_DEFAULT_PAGE_SIZE -# define SQLITE_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE -#endif - -/* -** Ordinarily, if no value is explicitly provided, SQLite creates databases -** with page size SQLITE_DEFAULT_PAGE_SIZE. However, based on certain -** device characteristics (sector-size and atomic write() support), -** SQLite may choose a larger value. This constant is the maximum value -** SQLite will choose on its own. -*/ -#ifndef SQLITE_MAX_DEFAULT_PAGE_SIZE -# define SQLITE_MAX_DEFAULT_PAGE_SIZE 8192 -#endif -#if SQLITE_MAX_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE -# undef SQLITE_MAX_DEFAULT_PAGE_SIZE -# define SQLITE_MAX_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE -#endif - - -/* -** Maximum number of pages in one database file. -** -** This is really just the default value for the max_page_count pragma. -** This value can be lowered (or raised) at run-time using that the -** max_page_count macro. -*/ -#ifndef SQLITE_MAX_PAGE_COUNT -# define SQLITE_MAX_PAGE_COUNT 1073741823 -#endif - -/* -** Maximum length (in bytes) of the pattern in a LIKE or GLOB -** operator. -*/ -#ifndef SQLITE_MAX_LIKE_PATTERN_LENGTH -# define SQLITE_MAX_LIKE_PATTERN_LENGTH 50000 -#endif - -/* -** Maximum depth of recursion for triggers. -** -** A value of 1 means that a trigger program will not be able to itself -** fire any triggers. A value of 0 means that no trigger programs at all -** may be executed. -*/ -#ifndef SQLITE_MAX_TRIGGER_DEPTH -# define SQLITE_MAX_TRIGGER_DEPTH 1000 -#endif - -/************** End of sqliteLimit.h *****************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ - -/* Disable nuisance warnings on Borland compilers */ -#if defined(__BORLANDC__) -#pragma warn -rch /* unreachable code */ -#pragma warn -ccc /* Condition is always true or false */ -#pragma warn -aus /* Assigned value is never used */ -#pragma warn -csu /* Comparing signed and unsigned */ -#pragma warn -spa /* Suspicious pointer arithmetic */ -#endif - -/* Needed for various definitions... */ -#ifndef _GNU_SOURCE -# define _GNU_SOURCE -#endif - -/* -** Include standard header files as necessary -*/ -#ifdef HAVE_STDINT_H -#include -#endif -#ifdef HAVE_INTTYPES_H -#include -#endif - -/* -** The number of samples of an index that SQLite takes in order to -** construct a histogram of the table content when running ANALYZE -** and with SQLITE_ENABLE_STAT2 -*/ -#define SQLITE_INDEX_SAMPLES 10 - -/* -** The following macros are used to cast pointers to integers and -** integers to pointers. The way you do this varies from one compiler -** to the next, so we have developed the following set of #if statements -** to generate appropriate macros for a wide range of compilers. -** -** The correct "ANSI" way to do this is to use the intptr_t type. -** Unfortunately, that typedef is not available on all compilers, or -** if it is available, it requires an #include of specific headers -** that very from one machine to the next. -** -** Ticket #3860: The llvm-gcc-4.2 compiler from Apple chokes on -** the ((void*)&((char*)0)[X]) construct. But MSVC chokes on ((void*)(X)). -** So we have to define the macros in different ways depending on the -** compiler. -*/ -#if defined(__PTRDIFF_TYPE__) /* This case should work for GCC */ -# define SQLITE_INT_TO_PTR(X) ((void*)(__PTRDIFF_TYPE__)(X)) -# define SQLITE_PTR_TO_INT(X) ((int)(__PTRDIFF_TYPE__)(X)) -#elif !defined(__GNUC__) /* Works for compilers other than LLVM */ -# define SQLITE_INT_TO_PTR(X) ((void*)&((char*)0)[X]) -# define SQLITE_PTR_TO_INT(X) ((int)(((char*)X)-(char*)0)) -#elif defined(HAVE_STDINT_H) /* Use this case if we have ANSI headers */ -# define SQLITE_INT_TO_PTR(X) ((void*)(intptr_t)(X)) -# define SQLITE_PTR_TO_INT(X) ((int)(intptr_t)(X)) -#else /* Generates a warning - but it always works */ -# define SQLITE_INT_TO_PTR(X) ((void*)(X)) -# define SQLITE_PTR_TO_INT(X) ((int)(X)) -#endif - -/* -** The SQLITE_THREADSAFE macro must be defined as either 0 or 1. -** Older versions of SQLite used an optional THREADSAFE macro. -** We support that for legacy -*/ -#if !defined(SQLITE_THREADSAFE) -#if defined(THREADSAFE) -# define SQLITE_THREADSAFE THREADSAFE -#else -# define SQLITE_THREADSAFE 1 -#endif -#endif - -/* -** The SQLITE_DEFAULT_MEMSTATUS macro must be defined as either 0 or 1. -** It determines whether or not the features related to -** SQLITE_CONFIG_MEMSTATUS are available by default or not. This value can -** be overridden at runtime using the sqlite3_config() API. -*/ -#if !defined(SQLITE_DEFAULT_MEMSTATUS) -# define SQLITE_DEFAULT_MEMSTATUS 1 -#endif - -/* -** Exactly one of the following macros must be defined in order to -** specify which memory allocation subsystem to use. -** -** SQLITE_SYSTEM_MALLOC // Use normal system malloc() -** SQLITE_MEMDEBUG // Debugging version of system malloc() -** -** (Historical note: There used to be several other options, but we've -** pared it down to just these two.) -** -** If none of the above are defined, then set SQLITE_SYSTEM_MALLOC as -** the default. -*/ -#if defined(SQLITE_SYSTEM_MALLOC)+defined(SQLITE_MEMDEBUG)>1 -# error "At most one of the following compile-time configuration options\ - is allows: SQLITE_SYSTEM_MALLOC, SQLITE_MEMDEBUG" -#endif -#if defined(SQLITE_SYSTEM_MALLOC)+defined(SQLITE_MEMDEBUG)==0 -# define SQLITE_SYSTEM_MALLOC 1 -#endif - -/* -** If SQLITE_MALLOC_SOFT_LIMIT is not zero, then try to keep the -** sizes of memory allocations below this value where possible. -*/ -#if !defined(SQLITE_MALLOC_SOFT_LIMIT) -# define SQLITE_MALLOC_SOFT_LIMIT 1024 -#endif - -/* -** We need to define _XOPEN_SOURCE as follows in order to enable -** recursive mutexes on most Unix systems. But Mac OS X is different. -** The _XOPEN_SOURCE define causes problems for Mac OS X we are told, -** so it is omitted there. See ticket #2673. -** -** Later we learn that _XOPEN_SOURCE is poorly or incorrectly -** implemented on some systems. So we avoid defining it at all -** if it is already defined or if it is unneeded because we are -** not doing a threadsafe build. Ticket #2681. -** -** See also ticket #2741. -*/ -#if !defined(_XOPEN_SOURCE) && !defined(__DARWIN__) && !defined(__APPLE__) && SQLITE_THREADSAFE -# define _XOPEN_SOURCE 500 /* Needed to enable pthread recursive mutexes */ -#endif - -/* -** The TCL headers are only needed when compiling the TCL bindings. -*/ -#if defined(SQLITE_TCL) || defined(TCLSH) -# include -#endif - -/* -** Many people are failing to set -DNDEBUG=1 when compiling SQLite. -** Setting NDEBUG makes the code smaller and run faster. So the following -** lines are added to automatically set NDEBUG unless the -DSQLITE_DEBUG=1 -** option is set. Thus NDEBUG becomes an opt-in rather than an opt-out -** feature. -*/ -#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) -# define NDEBUG 1 -#endif - -/* -** The testcase() macro is used to aid in coverage testing. When -** doing coverage testing, the condition inside the argument to -** testcase() must be evaluated both true and false in order to -** get full branch coverage. The testcase() macro is inserted -** to help ensure adequate test coverage in places where simple -** condition/decision coverage is inadequate. For example, testcase() -** can be used to make sure boundary values are tested. For -** bitmask tests, testcase() can be used to make sure each bit -** is significant and used at least once. On switch statements -** where multiple cases go to the same block of code, testcase() -** can insure that all cases are evaluated. -** -*/ -#ifdef SQLITE_COVERAGE_TEST -SQLITE_PRIVATE void sqlite3Coverage(int); -# define testcase(X) if( X ){ sqlite3Coverage(__LINE__); } -#else -# define testcase(X) -#endif - -/* -** The TESTONLY macro is used to enclose variable declarations or -** other bits of code that are needed to support the arguments -** within testcase() and assert() macros. -*/ -#if !defined(NDEBUG) || defined(SQLITE_COVERAGE_TEST) -# define TESTONLY(X) X -#else -# define TESTONLY(X) -#endif - -/* -** Sometimes we need a small amount of code such as a variable initialization -** to setup for a later assert() statement. We do not want this code to -** appear when assert() is disabled. The following macro is therefore -** used to contain that setup code. The "VVA" acronym stands for -** "Verification, Validation, and Accreditation". In other words, the -** code within VVA_ONLY() will only run during verification processes. -*/ -#ifndef NDEBUG -# define VVA_ONLY(X) X -#else -# define VVA_ONLY(X) -#endif - -/* -** The ALWAYS and NEVER macros surround boolean expressions which -** are intended to always be true or false, respectively. Such -** expressions could be omitted from the code completely. But they -** are included in a few cases in order to enhance the resilience -** of SQLite to unexpected behavior - to make the code "self-healing" -** or "ductile" rather than being "brittle" and crashing at the first -** hint of unplanned behavior. -** -** In other words, ALWAYS and NEVER are added for defensive code. -** -** When doing coverage testing ALWAYS and NEVER are hard-coded to -** be true and false so that the unreachable code then specify will -** not be counted as untested code. -*/ -#if defined(SQLITE_COVERAGE_TEST) -# define ALWAYS(X) (1) -# define NEVER(X) (0) -#elif !defined(NDEBUG) -# define ALWAYS(X) ((X)?1:(assert(0),0)) -# define NEVER(X) ((X)?(assert(0),1):0) -#else -# define ALWAYS(X) (X) -# define NEVER(X) (X) -#endif - -/* -** The macro unlikely() is a hint that surrounds a boolean -** expression that is usually false. Macro likely() surrounds -** a boolean expression that is usually true. GCC is able to -** use these hints to generate better code, sometimes. -*/ -#if defined(__GNUC__) && 0 -# define likely(X) __builtin_expect((X),1) -# define unlikely(X) __builtin_expect((X),0) -#else -# define likely(X) !!(X) -# define unlikely(X) !!(X) -#endif - -/************** Include sqlite3.h in the middle of sqliteInt.h ***************/ -/************** Begin file sqlite3.h *****************************************/ -/* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This header file defines the interface that the SQLite library -** presents to client programs. If a C-function, structure, datatype, -** or constant definition does not appear in this file, then it is -** not a published API of SQLite, is subject to change without -** notice, and should not be referenced by programs that use SQLite. -** -** Some of the definitions that are in this file are marked as -** "experimental". Experimental interfaces are normally new -** features recently added to SQLite. We do not anticipate changes -** to experimental interfaces but reserve the right to make minor changes -** if experience from use "in the wild" suggest such changes are prudent. -** -** The official C-language API documentation for SQLite is derived -** from comments in this file. This file is the authoritative source -** on how SQLite interfaces are suppose to operate. -** -** The name of this file under configuration management is "sqlite.h.in". -** The makefile makes some minor changes to this file (such as inserting -** the version number) and changes its name to "sqlite3.h" as -** part of the build process. -*/ -#ifndef _SQLITE3_H_ -#define _SQLITE3_H_ -#include /* Needed for the definition of va_list */ - -/* -** Make sure we can call this stuff from C++. -*/ -#if 0 -extern "C" { -#endif - - -/* -** Add the ability to override 'extern' -*/ -#ifndef SQLITE_EXTERN -# define SQLITE_EXTERN extern -#endif - -#ifndef SQLITE_API -# define SQLITE_API -#endif - - -/* -** These no-op macros are used in front of interfaces to mark those -** interfaces as either deprecated or experimental. New applications -** should not use deprecated interfaces - they are support for backwards -** compatibility only. Application writers should be aware that -** experimental interfaces are subject to change in point releases. -** -** These macros used to resolve to various kinds of compiler magic that -** would generate warning messages when they were used. But that -** compiler magic ended up generating such a flurry of bug reports -** that we have taken it all out and gone back to using simple -** noop macros. -*/ -#define SQLITE_DEPRECATED -#define SQLITE_EXPERIMENTAL - -/* -** Ensure these symbols were not defined by some previous header file. -*/ -#ifdef SQLITE_VERSION -# undef SQLITE_VERSION -#endif -#ifdef SQLITE_VERSION_NUMBER -# undef SQLITE_VERSION_NUMBER -#endif - -/* -** CAPI3REF: Compile-Time Library Version Numbers -** -** ^(The [SQLITE_VERSION] C preprocessor macro in the sqlite3.h header -** evaluates to a string literal that is the SQLite version in the -** format "X.Y.Z" where X is the major version number (always 3 for -** SQLite3) and Y is the minor version number and Z is the release number.)^ -** ^(The [SQLITE_VERSION_NUMBER] C preprocessor macro resolves to an integer -** with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z are the same -** numbers used in [SQLITE_VERSION].)^ -** The SQLITE_VERSION_NUMBER for any given release of SQLite will also -** be larger than the release from which it is derived. Either Y will -** be held constant and Z will be incremented or else Y will be incremented -** and Z will be reset to zero. -** -** Since version 3.6.18, SQLite source code has been stored in the -** Fossil configuration management -** system. ^The SQLITE_SOURCE_ID macro evalutes to -** a string which identifies a particular check-in of SQLite -** within its configuration management system. ^The SQLITE_SOURCE_ID -** string contains the date and time of the check-in (UTC) and an SHA1 -** hash of the entire source tree. -** -** See also: [sqlite3_libversion()], -** [sqlite3_libversion_number()], [sqlite3_sourceid()], -** [sqlite_version()] and [sqlite_source_id()]. -*/ -#define SQLITE_VERSION "3.6.23.1" -#define SQLITE_VERSION_NUMBER 3006023 -#define SQLITE_SOURCE_ID "2010-03-26 22:28:06 b078b588d617e07886ad156e9f54ade6d823568e" - -/* -** CAPI3REF: Run-Time Library Version Numbers -** KEYWORDS: sqlite3_version, sqlite3_sourceid -** -** These interfaces provide the same information as the [SQLITE_VERSION], -** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros -** but are associated with the library instead of the header file. ^(Cautious -** programmers might include assert() statements in their application to -** verify that values returned by these interfaces match the macros in -** the header, and thus insure that the application is -** compiled with matching library and header files. -** -** 
-** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
-** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 );
-** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 );
-**
)^ -** -** ^The sqlite3_version[] string constant contains the text of [SQLITE_VERSION] -** macro. ^The sqlite3_libversion() function returns a pointer to the -** to the sqlite3_version[] string constant. The sqlite3_libversion() -** function is provided for use in DLLs since DLL users usually do not have -** direct access to string constants within the DLL. ^The -** sqlite3_libversion_number() function returns an integer equal to -** [SQLITE_VERSION_NUMBER]. ^The sqlite3_sourceid() function returns -** a pointer to a string constant whose value is the same as the -** [SQLITE_SOURCE_ID] C preprocessor macro. -** -** See also: [sqlite_version()] and [sqlite_source_id()]. -*/ -SQLITE_API const char sqlite3_version[] = SQLITE_VERSION; -SQLITE_API const char *sqlite3_libversion(void); -SQLITE_API const char *sqlite3_sourceid(void); -SQLITE_API int sqlite3_libversion_number(void); - -#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS -/* -** CAPI3REF: Run-Time Library Compilation Options Diagnostics -** -** ^The sqlite3_compileoption_used() function returns 0 or 1 -** indicating whether the specified option was defined at -** compile time. ^The SQLITE_ prefix may be omitted from the -** option name passed to sqlite3_compileoption_used(). -** -** ^The sqlite3_compileoption_get() function allows interating -** over the list of options that were defined at compile time by -** returning the N-th compile time option string. ^If N is out of range, -** sqlite3_compileoption_get() returns a NULL pointer. ^The SQLITE_ -** prefix is omitted from any strings returned by -** sqlite3_compileoption_get(). -** -** ^Support for the diagnostic functions sqlite3_compileoption_used() -** and sqlite3_compileoption_get() may be omitted by specifing the -** [SQLITE_OMIT_COMPILEOPTION_DIAGS] option at compile time. -** -** See also: SQL functions [sqlite_compileoption_used()] and -** [sqlite_compileoption_get()] and the [compile_options pragma]. -*/ -SQLITE_API int sqlite3_compileoption_used(const char *zOptName); -SQLITE_API const char *sqlite3_compileoption_get(int N); -#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ - -/* -** CAPI3REF: Test To See If The Library Is Threadsafe -** -** ^The sqlite3_threadsafe() function returns zero if and only if -** SQLite was compiled mutexing code omitted due to the -** [SQLITE_THREADSAFE] compile-time option being set to 0. -** -** SQLite can be compiled with or without mutexes. When -** the [SQLITE_THREADSAFE] C preprocessor macro is 1 or 2, mutexes -** are enabled and SQLite is threadsafe. When the -** [SQLITE_THREADSAFE] macro is 0, -** the mutexes are omitted. Without the mutexes, it is not safe -** to use SQLite concurrently from more than one thread. -** -** Enabling mutexes incurs a measurable performance penalty. -** So if speed is of utmost importance, it makes sense to disable -** the mutexes. But for maximum safety, mutexes should be enabled. -** ^The default behavior is for mutexes to be enabled. -** -** This interface can be used by an application to make sure that the -** version of SQLite that it is linking against was compiled with -** the desired setting of the [SQLITE_THREADSAFE] macro. -** -** This interface only reports on the compile-time mutex setting -** of the [SQLITE_THREADSAFE] flag. If SQLite is compiled with -** SQLITE_THREADSAFE=1 or =2 then mutexes are enabled by default but -** can be fully or partially disabled using a call to [sqlite3_config()] -** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD], -** or [SQLITE_CONFIG_MUTEX]. ^(The return value of the -** sqlite3_threadsafe() function shows only the compile-time setting of -** thread safety, not any run-time changes to that setting made by -** sqlite3_config(). In other words, the return value from sqlite3_threadsafe() -** is unchanged by calls to sqlite3_config().)^ -** -** See the [threading mode] documentation for additional information. -*/ -SQLITE_API int sqlite3_threadsafe(void); - -/* -** CAPI3REF: Database Connection Handle -** KEYWORDS: {database connection} {database connections} -** -** Each open SQLite database is represented by a pointer to an instance of -** the opaque structure named "sqlite3". It is useful to think of an sqlite3 -** pointer as an object. The [sqlite3_open()], [sqlite3_open16()], and -** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()] -** is its destructor. There are many other interfaces (such as -** [sqlite3_prepare_v2()], [sqlite3_create_function()], and -** [sqlite3_busy_timeout()] to name but three) that are methods on an -** sqlite3 object. -*/ -typedef struct sqlite3 sqlite3; - -/* -** CAPI3REF: 64-Bit Integer Types -** KEYWORDS: sqlite_int64 sqlite_uint64 -** -** Because there is no cross-platform way to specify 64-bit integer types -** SQLite includes typedefs for 64-bit signed and unsigned integers. -** -** The sqlite3_int64 and sqlite3_uint64 are the preferred type definitions. -** The sqlite_int64 and sqlite_uint64 types are supported for backwards -** compatibility only. -** -** ^The sqlite3_int64 and sqlite_int64 types can store integer values -** between -9223372036854775808 and +9223372036854775807 inclusive. ^The -** sqlite3_uint64 and sqlite_uint64 types can store integer values -** between 0 and +18446744073709551615 inclusive. -*/ -#ifdef SQLITE_INT64_TYPE - typedef SQLITE_INT64_TYPE sqlite_int64; - typedef unsigned SQLITE_INT64_TYPE sqlite_uint64; -#elif defined(_MSC_VER) || defined(__BORLANDC__) - typedef __int64 sqlite_int64; - typedef unsigned __int64 sqlite_uint64; -#else - typedef long long int sqlite_int64; - typedef unsigned long long int sqlite_uint64; -#endif -typedef sqlite_int64 sqlite3_int64; -typedef sqlite_uint64 sqlite3_uint64; - -/* -** If compiling for a processor that lacks floating point support, -** substitute integer for floating-point. -*/ -#ifdef SQLITE_OMIT_FLOATING_POINT -# define double sqlite3_int64 -#endif - -/* -** CAPI3REF: Closing A Database Connection -** -** ^The sqlite3_close() routine is the destructor for the [sqlite3] object. -** ^Calls to sqlite3_close() return SQLITE_OK if the [sqlite3] object is -** successfullly destroyed and all associated resources are deallocated. -** -** Applications must [sqlite3_finalize | finalize] all [prepared statements] -** and [sqlite3_blob_close | close] all [BLOB handles] associated with -** the [sqlite3] object prior to attempting to close the object. ^If -** sqlite3_close() is called on a [database connection] that still has -** outstanding [prepared statements] or [BLOB handles], then it returns -** SQLITE_BUSY. -** -** ^If [sqlite3_close()] is invoked while a transaction is open, -** the transaction is automatically rolled back. -** -** The C parameter to [sqlite3_close(C)] must be either a NULL -** pointer or an [sqlite3] object pointer obtained -** from [sqlite3_open()], [sqlite3_open16()], or -** [sqlite3_open_v2()], and not previously closed. -** ^Calling sqlite3_close() with a NULL pointer argument is a -** harmless no-op. -*/ -SQLITE_API int sqlite3_close(sqlite3 *); - -/* -** The type for a callback function. -** This is legacy and deprecated. It is included for historical -** compatibility and is not documented. -*/ -typedef int (*sqlite3_callback)(void*,int,char**, char**); - -/* -** CAPI3REF: One-Step Query Execution Interface -** -** The sqlite3_exec() interface is a convenience wrapper around -** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()], -** that allows an application to run multiple statements of SQL -** without having to use a lot of C code. -** -** ^The sqlite3_exec() interface runs zero or more UTF-8 encoded, -** semicolon-separate SQL statements passed into its 2nd argument, -** in the context of the [database connection] passed in as its 1st -** argument. ^If the callback function of the 3rd argument to -** sqlite3_exec() is not NULL, then it is invoked for each result row -** coming out of the evaluated SQL statements. ^The 4th argument to -** to sqlite3_exec() is relayed through to the 1st argument of each -** callback invocation. ^If the callback pointer to sqlite3_exec() -** is NULL, then no callback is ever invoked and result rows are -** ignored. -** -** ^If an error occurs while evaluating the SQL statements passed into -** sqlite3_exec(), then execution of the current statement stops and -** subsequent statements are skipped. ^If the 5th parameter to sqlite3_exec() -** is not NULL then any error message is written into memory obtained -** from [sqlite3_malloc()] and passed back through the 5th parameter. -** To avoid memory leaks, the application should invoke [sqlite3_free()] -** on error message strings returned through the 5th parameter of -** of sqlite3_exec() after the error message string is no longer needed. -** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors -** occur, then sqlite3_exec() sets the pointer in its 5th parameter to -** NULL before returning. -** -** ^If an sqlite3_exec() callback returns non-zero, the sqlite3_exec() -** routine returns SQLITE_ABORT without invoking the callback again and -** without running any subsequent SQL statements. -** -** ^The 2nd argument to the sqlite3_exec() callback function is the -** number of columns in the result. ^The 3rd argument to the sqlite3_exec() -** callback is an array of pointers to strings obtained as if from -** [sqlite3_column_text()], one for each column. ^If an element of a -** result row is NULL then the corresponding string pointer for the -** sqlite3_exec() callback is a NULL pointer. ^The 4th argument to the -** sqlite3_exec() callback is an array of pointers to strings where each -** entry represents the name of corresponding result column as obtained -** from [sqlite3_column_name()]. -** -** ^If the 2nd parameter to sqlite3_exec() is a NULL pointer, a pointer -** to an empty string, or a pointer that contains only whitespace and/or -** SQL comments, then no SQL statements are evaluated and the database -** is not changed. -** -** Restrictions: -** -**
    -**
  • The application must insure that the 1st parameter to sqlite3_exec() -** is a valid and open [database connection]. -**
  • The application must not close [database connection] specified by -** the 1st parameter to sqlite3_exec() while sqlite3_exec() is running. -**
  • The application must not modify the SQL statement text passed into -** the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running. -**
-*/ -SQLITE_API int sqlite3_exec( - sqlite3*, /* An open database */ - const char *sql, /* SQL to be evaluated */ - int (*callback)(void*,int,char**,char**), /* Callback function */ - void *, /* 1st argument to callback */ - char **errmsg /* Error msg written here */ -); - -/* -** CAPI3REF: Result Codes -** KEYWORDS: SQLITE_OK {error code} {error codes} -** KEYWORDS: {result code} {result codes} -** -** Many SQLite functions return an integer result code from the set shown -** here in order to indicates success or failure. -** -** New error codes may be added in future versions of SQLite. -** -** See also: [SQLITE_IOERR_READ | extended result codes] -*/ -#define SQLITE_OK 0 /* Successful result */ -/* beginning-of-error-codes */ -#define SQLITE_ERROR 1 /* SQL error or missing database */ -#define SQLITE_INTERNAL 2 /* Internal logic error in SQLite */ -#define SQLITE_PERM 3 /* Access permission denied */ -#define SQLITE_ABORT 4 /* Callback routine requested an abort */ -#define SQLITE_BUSY 5 /* The database file is locked */ -#define SQLITE_LOCKED 6 /* A table in the database is locked */ -#define SQLITE_NOMEM 7 /* A malloc() failed */ -#define SQLITE_READONLY 8 /* Attempt to write a readonly database */ -#define SQLITE_INTERRUPT 9 /* Operation terminated by sqlite3_interrupt()*/ -#define SQLITE_IOERR 10 /* Some kind of disk I/O error occurred */ -#define SQLITE_CORRUPT 11 /* The database disk image is malformed */ -#define SQLITE_NOTFOUND 12 /* NOT USED. Table or record not found */ -#define SQLITE_FULL 13 /* Insertion failed because database is full */ -#define SQLITE_CANTOPEN 14 /* Unable to open the database file */ -#define SQLITE_PROTOCOL 15 /* NOT USED. Database lock protocol error */ -#define SQLITE_EMPTY 16 /* Database is empty */ -#define SQLITE_SCHEMA 17 /* The database schema changed */ -#define SQLITE_TOOBIG 18 /* String or BLOB exceeds size limit */ -#define SQLITE_CONSTRAINT 19 /* Abort due to constraint violation */ -#define SQLITE_MISMATCH 20 /* Data type mismatch */ -#define SQLITE_MISUSE 21 /* Library used incorrectly */ -#define SQLITE_NOLFS 22 /* Uses OS features not supported on host */ -#define SQLITE_AUTH 23 /* Authorization denied */ -#define SQLITE_FORMAT 24 /* Auxiliary database format error */ -#define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */ -#define SQLITE_NOTADB 26 /* File opened that is not a database file */ -#define SQLITE_ROW 100 /* sqlite3_step() has another row ready */ -#define SQLITE_DONE 101 /* sqlite3_step() has finished executing */ -/* end-of-error-codes */ - -/* -** CAPI3REF: Extended Result Codes -** KEYWORDS: {extended error code} {extended error codes} -** KEYWORDS: {extended result code} {extended result codes} -** -** In its default configuration, SQLite API routines return one of 26 integer -** [SQLITE_OK | result codes]. However, experience has shown that many of -** these result codes are too coarse-grained. They do not provide as -** much information about problems as programmers might like. In an effort to -** address this, newer versions of SQLite (version 3.3.8 and later) include -** support for additional result codes that provide more detailed information -** about errors. The extended result codes are enabled or disabled -** on a per database connection basis using the -** [sqlite3_extended_result_codes()] API. -** -** Some of the available extended result codes are listed here. -** One may expect the number of extended result codes will be expand -** over time. Software that uses extended result codes should expect -** to see new result codes in future releases of SQLite. -** -** The SQLITE_OK result code will never be extended. It will always -** be exactly zero. -*/ -#define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8)) -#define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8)) -#define SQLITE_IOERR_WRITE (SQLITE_IOERR | (3<<8)) -#define SQLITE_IOERR_FSYNC (SQLITE_IOERR | (4<<8)) -#define SQLITE_IOERR_DIR_FSYNC (SQLITE_IOERR | (5<<8)) -#define SQLITE_IOERR_TRUNCATE (SQLITE_IOERR | (6<<8)) -#define SQLITE_IOERR_FSTAT (SQLITE_IOERR | (7<<8)) -#define SQLITE_IOERR_UNLOCK (SQLITE_IOERR | (8<<8)) -#define SQLITE_IOERR_RDLOCK (SQLITE_IOERR | (9<<8)) -#define SQLITE_IOERR_DELETE (SQLITE_IOERR | (10<<8)) -#define SQLITE_IOERR_BLOCKED (SQLITE_IOERR | (11<<8)) -#define SQLITE_IOERR_NOMEM (SQLITE_IOERR | (12<<8)) -#define SQLITE_IOERR_ACCESS (SQLITE_IOERR | (13<<8)) -#define SQLITE_IOERR_CHECKRESERVEDLOCK (SQLITE_IOERR | (14<<8)) -#define SQLITE_IOERR_LOCK (SQLITE_IOERR | (15<<8)) -#define SQLITE_IOERR_CLOSE (SQLITE_IOERR | (16<<8)) -#define SQLITE_IOERR_DIR_CLOSE (SQLITE_IOERR | (17<<8)) -#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8) ) - -/* -** CAPI3REF: Flags For File Open Operations -** -** These bit values are intended for use in the -** 3rd parameter to the [sqlite3_open_v2()] interface and -** in the 4th parameter to the xOpen method of the -** [sqlite3_vfs] object. -*/ -#define SQLITE_OPEN_READONLY 0x00000001 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_READWRITE 0x00000002 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_CREATE 0x00000004 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_DELETEONCLOSE 0x00000008 /* VFS only */ -#define SQLITE_OPEN_EXCLUSIVE 0x00000010 /* VFS only */ -#define SQLITE_OPEN_AUTOPROXY 0x00000020 /* VFS only */ -#define SQLITE_OPEN_MAIN_DB 0x00000100 /* VFS only */ -#define SQLITE_OPEN_TEMP_DB 0x00000200 /* VFS only */ -#define SQLITE_OPEN_TRANSIENT_DB 0x00000400 /* VFS only */ -#define SQLITE_OPEN_MAIN_JOURNAL 0x00000800 /* VFS only */ -#define SQLITE_OPEN_TEMP_JOURNAL 0x00001000 /* VFS only */ -#define SQLITE_OPEN_SUBJOURNAL 0x00002000 /* VFS only */ -#define SQLITE_OPEN_MASTER_JOURNAL 0x00004000 /* VFS only */ -#define SQLITE_OPEN_NOMUTEX 0x00008000 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_FULLMUTEX 0x00010000 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_SHAREDCACHE 0x00020000 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_PRIVATECACHE 0x00040000 /* Ok for sqlite3_open_v2() */ - -/* -** CAPI3REF: Device Characteristics -** -** The xDeviceCapabilities method of the [sqlite3_io_methods] -** object returns an integer which is a vector of the these -** bit values expressing I/O characteristics of the mass storage -** device that holds the file that the [sqlite3_io_methods] -** refers to. -** -** The SQLITE_IOCAP_ATOMIC property means that all writes of -** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values -** mean that writes of blocks that are nnn bytes in size and -** are aligned to an address which is an integer multiple of -** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means -** that when data is appended to a file, the data is appended -** first then the size of the file is extended, never the other -** way around. The SQLITE_IOCAP_SEQUENTIAL property means that -** information is written to disk in the same order as calls -** to xWrite(). -*/ -#define SQLITE_IOCAP_ATOMIC 0x00000001 -#define SQLITE_IOCAP_ATOMIC512 0x00000002 -#define SQLITE_IOCAP_ATOMIC1K 0x00000004 -#define SQLITE_IOCAP_ATOMIC2K 0x00000008 -#define SQLITE_IOCAP_ATOMIC4K 0x00000010 -#define SQLITE_IOCAP_ATOMIC8K 0x00000020 -#define SQLITE_IOCAP_ATOMIC16K 0x00000040 -#define SQLITE_IOCAP_ATOMIC32K 0x00000080 -#define SQLITE_IOCAP_ATOMIC64K 0x00000100 -#define SQLITE_IOCAP_SAFE_APPEND 0x00000200 -#define SQLITE_IOCAP_SEQUENTIAL 0x00000400 - -/* -** CAPI3REF: File Locking Levels -** -** SQLite uses one of these integer values as the second -** argument to calls it makes to the xLock() and xUnlock() methods -** of an [sqlite3_io_methods] object. -*/ -#define SQLITE_LOCK_NONE 0 -#define SQLITE_LOCK_SHARED 1 -#define SQLITE_LOCK_RESERVED 2 -#define SQLITE_LOCK_PENDING 3 -#define SQLITE_LOCK_EXCLUSIVE 4 - -/* -** CAPI3REF: Synchronization Type Flags -** -** When SQLite invokes the xSync() method of an -** [sqlite3_io_methods] object it uses a combination of -** these integer values as the second argument. -** -** When the SQLITE_SYNC_DATAONLY flag is used, it means that the -** sync operation only needs to flush data to mass storage. Inode -** information need not be flushed. If the lower four bits of the flag -** equal SQLITE_SYNC_NORMAL, that means to use normal fsync() semantics. -** If the lower four bits equal SQLITE_SYNC_FULL, that means -** to use Mac OS X style fullsync instead of fsync(). -*/ -#define SQLITE_SYNC_NORMAL 0x00002 -#define SQLITE_SYNC_FULL 0x00003 -#define SQLITE_SYNC_DATAONLY 0x00010 - -/* -** CAPI3REF: OS Interface Open File Handle -** -** An [sqlite3_file] object represents an open file in the -** [sqlite3_vfs | OS interface layer]. Individual OS interface -** implementations will -** want to subclass this object by appending additional fields -** for their own use. The pMethods entry is a pointer to an -** [sqlite3_io_methods] object that defines methods for performing -** I/O operations on the open file. -*/ -typedef struct sqlite3_file sqlite3_file; -struct sqlite3_file { - const struct sqlite3_io_methods *pMethods; /* Methods for an open file */ -}; - -/* -** CAPI3REF: OS Interface File Virtual Methods Object -** -** Every file opened by the [sqlite3_vfs] xOpen method populates an -** [sqlite3_file] object (or, more commonly, a subclass of the -** [sqlite3_file] object) with a pointer to an instance of this object. -** This object defines the methods used to perform various operations -** against the open file represented by the [sqlite3_file] object. -** -** If the xOpen method sets the sqlite3_file.pMethods element -** to a non-NULL pointer, then the sqlite3_io_methods.xClose method -** may be invoked even if the xOpen reported that it failed. The -** only way to prevent a call to xClose following a failed xOpen -** is for the xOpen to set the sqlite3_file.pMethods element to NULL. -** -** The flags argument to xSync may be one of [SQLITE_SYNC_NORMAL] or -** [SQLITE_SYNC_FULL]. The first choice is the normal fsync(). -** The second choice is a Mac OS X style fullsync. The [SQLITE_SYNC_DATAONLY] -** flag may be ORed in to indicate that only the data of the file -** and not its inode needs to be synced. -** -** The integer values to xLock() and xUnlock() are one of -**
    -**
  • [SQLITE_LOCK_NONE], -**
  • [SQLITE_LOCK_SHARED], -**
  • [SQLITE_LOCK_RESERVED], -**
  • [SQLITE_LOCK_PENDING], or -**
  • [SQLITE_LOCK_EXCLUSIVE]. -**
-** xLock() increases the lock. xUnlock() decreases the lock. -** The xCheckReservedLock() method checks whether any database connection, -** either in this process or in some other process, is holding a RESERVED, -** PENDING, or EXCLUSIVE lock on the file. It returns true -** if such a lock exists and false otherwise. -** -** The xFileControl() method is a generic interface that allows custom -** VFS implementations to directly control an open file using the -** [sqlite3_file_control()] interface. The second "op" argument is an -** integer opcode. The third argument is a generic pointer intended to -** point to a structure that may contain arguments or space in which to -** write return values. Potential uses for xFileControl() might be -** functions to enable blocking locks with timeouts, to change the -** locking strategy (for example to use dot-file locks), to inquire -** about the status of a lock, or to break stale locks. The SQLite -** core reserves all opcodes less than 100 for its own use. -** A [SQLITE_FCNTL_LOCKSTATE | list of opcodes] less than 100 is available. -** Applications that define a custom xFileControl method should use opcodes -** greater than 100 to avoid conflicts. -** -** The xSectorSize() method returns the sector size of the -** device that underlies the file. The sector size is the -** minimum write that can be performed without disturbing -** other bytes in the file. The xDeviceCharacteristics() -** method returns a bit vector describing behaviors of the -** underlying device: -** -**
    -**
  • [SQLITE_IOCAP_ATOMIC] -**
  • [SQLITE_IOCAP_ATOMIC512] -**
  • [SQLITE_IOCAP_ATOMIC1K] -**
  • [SQLITE_IOCAP_ATOMIC2K] -**
  • [SQLITE_IOCAP_ATOMIC4K] -**
  • [SQLITE_IOCAP_ATOMIC8K] -**
  • [SQLITE_IOCAP_ATOMIC16K] -**
  • [SQLITE_IOCAP_ATOMIC32K] -**
  • [SQLITE_IOCAP_ATOMIC64K] -**
  • [SQLITE_IOCAP_SAFE_APPEND] -**
  • [SQLITE_IOCAP_SEQUENTIAL] -**
-** -** The SQLITE_IOCAP_ATOMIC property means that all writes of -** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values -** mean that writes of blocks that are nnn bytes in size and -** are aligned to an address which is an integer multiple of -** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means -** that when data is appended to a file, the data is appended -** first then the size of the file is extended, never the other -** way around. The SQLITE_IOCAP_SEQUENTIAL property means that -** information is written to disk in the same order as calls -** to xWrite(). -** -** If xRead() returns SQLITE_IOERR_SHORT_READ it must also fill -** in the unread portions of the buffer with zeros. A VFS that -** fails to zero-fill short reads might seem to work. However, -** failure to zero-fill short reads will eventually lead to -** database corruption. -*/ -typedef struct sqlite3_io_methods sqlite3_io_methods; -struct sqlite3_io_methods { - int iVersion; - int (*xClose)(sqlite3_file*); - int (*xRead)(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst); - int (*xWrite)(sqlite3_file*, const void*, int iAmt, sqlite3_int64 iOfst); - int (*xTruncate)(sqlite3_file*, sqlite3_int64 size); - int (*xSync)(sqlite3_file*, int flags); - int (*xFileSize)(sqlite3_file*, sqlite3_int64 *pSize); - int (*xLock)(sqlite3_file*, int); - int (*xUnlock)(sqlite3_file*, int); - int (*xCheckReservedLock)(sqlite3_file*, int *pResOut); - int (*xFileControl)(sqlite3_file*, int op, void *pArg); - int (*xSectorSize)(sqlite3_file*); - int (*xDeviceCharacteristics)(sqlite3_file*); - /* Additional methods may be added in future releases */ -}; - -/* -** CAPI3REF: Standard File Control Opcodes -** -** These integer constants are opcodes for the xFileControl method -** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()] -** interface. -** -** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging. This -** opcode causes the xFileControl method to write the current state of -** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED], -** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE]) -** into an integer that the pArg argument points to. This capability -** is used during testing and only needs to be supported when SQLITE_TEST -** is defined. -*/ -#define SQLITE_FCNTL_LOCKSTATE 1 -#define SQLITE_GET_LOCKPROXYFILE 2 -#define SQLITE_SET_LOCKPROXYFILE 3 -#define SQLITE_LAST_ERRNO 4 - -/* -** CAPI3REF: Mutex Handle -** -** The mutex module within SQLite defines [sqlite3_mutex] to be an -** abstract type for a mutex object. The SQLite core never looks -** at the internal representation of an [sqlite3_mutex]. It only -** deals with pointers to the [sqlite3_mutex] object. -** -** Mutexes are created using [sqlite3_mutex_alloc()]. -*/ -typedef struct sqlite3_mutex sqlite3_mutex; - -/* -** CAPI3REF: OS Interface Object -** -** An instance of the sqlite3_vfs object defines the interface between -** the SQLite core and the underlying operating system. The "vfs" -** in the name of the object stands for "virtual file system". -** -** The value of the iVersion field is initially 1 but may be larger in -** future versions of SQLite. Additional fields may be appended to this -** object when the iVersion value is increased. Note that the structure -** of the sqlite3_vfs object changes in the transaction between -** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not -** modified. -** -** The szOsFile field is the size of the subclassed [sqlite3_file] -** structure used by this VFS. mxPathname is the maximum length of -** a pathname in this VFS. -** -** Registered sqlite3_vfs objects are kept on a linked list formed by -** the pNext pointer. The [sqlite3_vfs_register()] -** and [sqlite3_vfs_unregister()] interfaces manage this list -** in a thread-safe way. The [sqlite3_vfs_find()] interface -** searches the list. Neither the application code nor the VFS -** implementation should use the pNext pointer. -** -** The pNext field is the only field in the sqlite3_vfs -** structure that SQLite will ever modify. SQLite will only access -** or modify this field while holding a particular static mutex. -** The application should never modify anything within the sqlite3_vfs -** object once the object has been registered. -** -** The zName field holds the name of the VFS module. The name must -** be unique across all VFS modules. -** -** SQLite will guarantee that the zFilename parameter to xOpen -** is either a NULL pointer or string obtained -** from xFullPathname(). SQLite further guarantees that -** the string will be valid and unchanged until xClose() is -** called. Because of the previous sentence, -** the [sqlite3_file] can safely store a pointer to the -** filename if it needs to remember the filename for some reason. -** If the zFilename parameter is xOpen is a NULL pointer then xOpen -** must invent its own temporary name for the file. Whenever the -** xFilename parameter is NULL it will also be the case that the -** flags parameter will include [SQLITE_OPEN_DELETEONCLOSE]. -** -** The flags argument to xOpen() includes all bits set in -** the flags argument to [sqlite3_open_v2()]. Or if [sqlite3_open()] -** or [sqlite3_open16()] is used, then flags includes at least -** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]. -** If xOpen() opens a file read-only then it sets *pOutFlags to -** include [SQLITE_OPEN_READONLY]. Other bits in *pOutFlags may be set. -** -** SQLite will also add one of the following flags to the xOpen() -** call, depending on the object being opened: -** -**
    -**
  • [SQLITE_OPEN_MAIN_DB] -**
  • [SQLITE_OPEN_MAIN_JOURNAL] -**
  • [SQLITE_OPEN_TEMP_DB] -**
  • [SQLITE_OPEN_TEMP_JOURNAL] -**
  • [SQLITE_OPEN_TRANSIENT_DB] -**
  • [SQLITE_OPEN_SUBJOURNAL] -**
  • [SQLITE_OPEN_MASTER_JOURNAL] -**
-** -** The file I/O implementation can use the object type flags to -** change the way it deals with files. For example, an application -** that does not care about crash recovery or rollback might make -** the open of a journal file a no-op. Writes to this journal would -** also be no-ops, and any attempt to read the journal would return -** SQLITE_IOERR. Or the implementation might recognize that a database -** file will be doing page-aligned sector reads and writes in a random -** order and set up its I/O subsystem accordingly. -** -** SQLite might also add one of the following flags to the xOpen method: -** -**
    -**
  • [SQLITE_OPEN_DELETEONCLOSE] -**
  • [SQLITE_OPEN_EXCLUSIVE] -**
-** -** The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be -** deleted when it is closed. The [SQLITE_OPEN_DELETEONCLOSE] -** will be set for TEMP databases, journals and for subjournals. -** -** The [SQLITE_OPEN_EXCLUSIVE] flag is always used in conjunction -** with the [SQLITE_OPEN_CREATE] flag, which are both directly -** analogous to the O_EXCL and O_CREAT flags of the POSIX open() -** API. The SQLITE_OPEN_EXCLUSIVE flag, when paired with the -** SQLITE_OPEN_CREATE, is used to indicate that file should always -** be created, and that it is an error if it already exists. -** It is not used to indicate the file should be opened -** for exclusive access. -** -** At least szOsFile bytes of memory are allocated by SQLite -** to hold the [sqlite3_file] structure passed as the third -** argument to xOpen. The xOpen method does not have to -** allocate the structure; it should just fill it in. Note that -** the xOpen method must set the sqlite3_file.pMethods to either -** a valid [sqlite3_io_methods] object or to NULL. xOpen must do -** this even if the open fails. SQLite expects that the sqlite3_file.pMethods -** element will be valid after xOpen returns regardless of the success -** or failure of the xOpen call. -** -** The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS] -** to test for the existence of a file, or [SQLITE_ACCESS_READWRITE] to -** test whether a file is readable and writable, or [SQLITE_ACCESS_READ] -** to test whether a file is at least readable. The file can be a -** directory. -** -** SQLite will always allocate at least mxPathname+1 bytes for the -** output buffer xFullPathname. The exact size of the output buffer -** is also passed as a parameter to both methods. If the output buffer -** is not large enough, [SQLITE_CANTOPEN] should be returned. Since this is -** handled as a fatal error by SQLite, vfs implementations should endeavor -** to prevent this by setting mxPathname to a sufficiently large value. -** -** The xRandomness(), xSleep(), and xCurrentTime() interfaces -** are not strictly a part of the filesystem, but they are -** included in the VFS structure for completeness. -** The xRandomness() function attempts to return nBytes bytes -** of good-quality randomness into zOut. The return value is -** the actual number of bytes of randomness obtained. -** The xSleep() method causes the calling thread to sleep for at -** least the number of microseconds given. The xCurrentTime() -** method returns a Julian Day Number for the current date and time. -** -*/ -typedef struct sqlite3_vfs sqlite3_vfs; -struct sqlite3_vfs { - int iVersion; /* Structure version number */ - int szOsFile; /* Size of subclassed sqlite3_file */ - int mxPathname; /* Maximum file pathname length */ - sqlite3_vfs *pNext; /* Next registered VFS */ - const char *zName; /* Name of this virtual file system */ - void *pAppData; /* Pointer to application-specific data */ - int (*xOpen)(sqlite3_vfs*, const char *zName, sqlite3_file*, - int flags, int *pOutFlags); - int (*xDelete)(sqlite3_vfs*, const char *zName, int syncDir); - int (*xAccess)(sqlite3_vfs*, const char *zName, int flags, int *pResOut); - int (*xFullPathname)(sqlite3_vfs*, const char *zName, int nOut, char *zOut); - void *(*xDlOpen)(sqlite3_vfs*, const char *zFilename); - void (*xDlError)(sqlite3_vfs*, int nByte, char *zErrMsg); - void (*(*xDlSym)(sqlite3_vfs*,void*, const char *zSymbol))(void); - void (*xDlClose)(sqlite3_vfs*, void*); - int (*xRandomness)(sqlite3_vfs*, int nByte, char *zOut); - int (*xSleep)(sqlite3_vfs*, int microseconds); - int (*xCurrentTime)(sqlite3_vfs*, double*); - int (*xGetLastError)(sqlite3_vfs*, int, char *); - /* New fields may be appended in figure versions. The iVersion - ** value will increment whenever this happens. */ -}; - -/* -** CAPI3REF: Flags for the xAccess VFS method -** -** These integer constants can be used as the third parameter to -** the xAccess method of an [sqlite3_vfs] object. They determine -** what kind of permissions the xAccess method is looking for. -** With SQLITE_ACCESS_EXISTS, the xAccess method -** simply checks whether the file exists. -** With SQLITE_ACCESS_READWRITE, the xAccess method -** checks whether the file is both readable and writable. -** With SQLITE_ACCESS_READ, the xAccess method -** checks whether the file is readable. -*/ -#define SQLITE_ACCESS_EXISTS 0 -#define SQLITE_ACCESS_READWRITE 1 -#define SQLITE_ACCESS_READ 2 - -/* -** CAPI3REF: Initialize The SQLite Library -** -** ^The sqlite3_initialize() routine initializes the -** SQLite library. ^The sqlite3_shutdown() routine -** deallocates any resources that were allocated by sqlite3_initialize(). -** These routines are designed to aid in process initialization and -** shutdown on embedded systems. Workstation applications using -** SQLite normally do not need to invoke either of these routines. -** -** A call to sqlite3_initialize() is an "effective" call if it is -** the first time sqlite3_initialize() is invoked during the lifetime of -** the process, or if it is the first time sqlite3_initialize() is invoked -** following a call to sqlite3_shutdown(). ^(Only an effective call -** of sqlite3_initialize() does any initialization. All other calls -** are harmless no-ops.)^ -** -** A call to sqlite3_shutdown() is an "effective" call if it is the first -** call to sqlite3_shutdown() since the last sqlite3_initialize(). ^(Only -** an effective call to sqlite3_shutdown() does any deinitialization. -** All other valid calls to sqlite3_shutdown() are harmless no-ops.)^ -** -** The sqlite3_initialize() interface is threadsafe, but sqlite3_shutdown() -** is not. The sqlite3_shutdown() interface must only be called from a -** single thread. All open [database connections] must be closed and all -** other SQLite resources must be deallocated prior to invoking -** sqlite3_shutdown(). -** -** Among other things, ^sqlite3_initialize() will invoke -** sqlite3_os_init(). Similarly, ^sqlite3_shutdown() -** will invoke sqlite3_os_end(). -** -** ^The sqlite3_initialize() routine returns [SQLITE_OK] on success. -** ^If for some reason, sqlite3_initialize() is unable to initialize -** the library (perhaps it is unable to allocate a needed resource such -** as a mutex) it returns an [error code] other than [SQLITE_OK]. -** -** ^The sqlite3_initialize() routine is called internally by many other -** SQLite interfaces so that an application usually does not need to -** invoke sqlite3_initialize() directly. For example, [sqlite3_open()] -** calls sqlite3_initialize() so the SQLite library will be automatically -** initialized when [sqlite3_open()] is called if it has not be initialized -** already. ^However, if SQLite is compiled with the [SQLITE_OMIT_AUTOINIT] -** compile-time option, then the automatic calls to sqlite3_initialize() -** are omitted and the application must call sqlite3_initialize() directly -** prior to using any other SQLite interface. For maximum portability, -** it is recommended that applications always invoke sqlite3_initialize() -** directly prior to using any other SQLite interface. Future releases -** of SQLite may require this. In other words, the behavior exhibited -** when SQLite is compiled with [SQLITE_OMIT_AUTOINIT] might become the -** default behavior in some future release of SQLite. -** -** The sqlite3_os_init() routine does operating-system specific -** initialization of the SQLite library. The sqlite3_os_end() -** routine undoes the effect of sqlite3_os_init(). Typical tasks -** performed by these routines include allocation or deallocation -** of static resources, initialization of global variables, -** setting up a default [sqlite3_vfs] module, or setting up -** a default configuration using [sqlite3_config()]. -** -** The application should never invoke either sqlite3_os_init() -** or sqlite3_os_end() directly. The application should only invoke -** sqlite3_initialize() and sqlite3_shutdown(). The sqlite3_os_init() -** interface is called automatically by sqlite3_initialize() and -** sqlite3_os_end() is called by sqlite3_shutdown(). Appropriate -** implementations for sqlite3_os_init() and sqlite3_os_end() -** are built into SQLite when it is compiled for Unix, Windows, or OS/2. -** When [custom builds | built for other platforms] -** (using the [SQLITE_OS_OTHER=1] compile-time -** option) the application must supply a suitable implementation for -** sqlite3_os_init() and sqlite3_os_end(). An application-supplied -** implementation of sqlite3_os_init() or sqlite3_os_end() -** must return [SQLITE_OK] on success and some other [error code] upon -** failure. -*/ -SQLITE_API int sqlite3_initialize(void); -SQLITE_API int sqlite3_shutdown(void); -SQLITE_API int sqlite3_os_init(void); -SQLITE_API int sqlite3_os_end(void); - -/* -** CAPI3REF: Configuring The SQLite Library -** -** The sqlite3_config() interface is used to make global configuration -** changes to SQLite in order to tune SQLite to the specific needs of -** the application. The default configuration is recommended for most -** applications and so this routine is usually not necessary. It is -** provided to support rare applications with unusual needs. -** -** The sqlite3_config() interface is not threadsafe. The application -** must insure that no other SQLite interfaces are invoked by other -** threads while sqlite3_config() is running. Furthermore, sqlite3_config() -** may only be invoked prior to library initialization using -** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()]. -** ^If sqlite3_config() is called after [sqlite3_initialize()] and before -** [sqlite3_shutdown()] then it will return SQLITE_MISUSE. -** Note, however, that ^sqlite3_config() can be called as part of the -** implementation of an application-defined [sqlite3_os_init()]. -** -** The first argument to sqlite3_config() is an integer -** [SQLITE_CONFIG_SINGLETHREAD | configuration option] that determines -** what property of SQLite is to be configured. Subsequent arguments -** vary depending on the [SQLITE_CONFIG_SINGLETHREAD | configuration option] -** in the first argument. -** -** ^When a configuration option is set, sqlite3_config() returns [SQLITE_OK]. -** ^If the option is unknown or SQLite is unable to set the option -** then this routine returns a non-zero [error code]. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_config(int, ...); - -/* -** CAPI3REF: Configure database connections -** EXPERIMENTAL -** -** The sqlite3_db_config() interface is used to make configuration -** changes to a [database connection]. The interface is similar to -** [sqlite3_config()] except that the changes apply to a single -** [database connection] (specified in the first argument). The -** sqlite3_db_config() interface should only be used immediately after -** the database connection is created using [sqlite3_open()], -** [sqlite3_open16()], or [sqlite3_open_v2()]. -** -** The second argument to sqlite3_db_config(D,V,...) is the -** configuration verb - an integer code that indicates what -** aspect of the [database connection] is being configured. -** The only choice for this value is [SQLITE_DBCONFIG_LOOKASIDE]. -** New verbs are likely to be added in future releases of SQLite. -** Additional arguments depend on the verb. -** -** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if -** the call is considered successful. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_db_config(sqlite3*, int op, ...); - -/* -** CAPI3REF: Memory Allocation Routines -** EXPERIMENTAL -** -** An instance of this object defines the interface between SQLite -** and low-level memory allocation routines. -** -** This object is used in only one place in the SQLite interface. -** A pointer to an instance of this object is the argument to -** [sqlite3_config()] when the configuration option is -** [SQLITE_CONFIG_MALLOC] or [SQLITE_CONFIG_GETMALLOC]. -** By creating an instance of this object -** and passing it to [sqlite3_config]([SQLITE_CONFIG_MALLOC]) -** during configuration, an application can specify an alternative -** memory allocation subsystem for SQLite to use for all of its -** dynamic memory needs. -** -** Note that SQLite comes with several [built-in memory allocators] -** that are perfectly adequate for the overwhelming majority of applications -** and that this object is only useful to a tiny minority of applications -** with specialized memory allocation requirements. This object is -** also used during testing of SQLite in order to specify an alternative -** memory allocator that simulates memory out-of-memory conditions in -** order to verify that SQLite recovers gracefully from such -** conditions. -** -** The xMalloc and xFree methods must work like the -** malloc() and free() functions from the standard C library. -** The xRealloc method must work like realloc() from the standard C library -** with the exception that if the second argument to xRealloc is zero, -** xRealloc must be a no-op - it must not perform any allocation or -** deallocation. ^SQLite guarantees that the second argument to -** xRealloc is always a value returned by a prior call to xRoundup. -** And so in cases where xRoundup always returns a positive number, -** xRealloc can perform exactly as the standard library realloc() and -** still be in compliance with this specification. -** -** xSize should return the allocated size of a memory allocation -** previously obtained from xMalloc or xRealloc. The allocated size -** is always at least as big as the requested size but may be larger. -** -** The xRoundup method returns what would be the allocated size of -** a memory allocation given a particular requested size. Most memory -** allocators round up memory allocations at least to the next multiple -** of 8. Some allocators round up to a larger multiple or to a power of 2. -** Every memory allocation request coming in through [sqlite3_malloc()] -** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0, -** that causes the corresponding memory allocation to fail. -** -** The xInit method initializes the memory allocator. (For example, -** it might allocate any require mutexes or initialize internal data -** structures. The xShutdown method is invoked (indirectly) by -** [sqlite3_shutdown()] and should deallocate any resources acquired -** by xInit. The pAppData pointer is used as the only parameter to -** xInit and xShutdown. -** -** SQLite holds the [SQLITE_MUTEX_STATIC_MASTER] mutex when it invokes -** the xInit method, so the xInit method need not be threadsafe. The -** xShutdown method is only called from [sqlite3_shutdown()] so it does -** not need to be threadsafe either. For all other methods, SQLite -** holds the [SQLITE_MUTEX_STATIC_MEM] mutex as long as the -** [SQLITE_CONFIG_MEMSTATUS] configuration option is turned on (which -** it is by default) and so the methods are automatically serialized. -** However, if [SQLITE_CONFIG_MEMSTATUS] is disabled, then the other -** methods must be threadsafe or else make their own arrangements for -** serialization. -** -** SQLite will never invoke xInit() more than once without an intervening -** call to xShutdown(). -*/ -typedef struct sqlite3_mem_methods sqlite3_mem_methods; -struct sqlite3_mem_methods { - void *(*xMalloc)(int); /* Memory allocation function */ - void (*xFree)(void*); /* Free a prior allocation */ - void *(*xRealloc)(void*,int); /* Resize an allocation */ - int (*xSize)(void*); /* Return the size of an allocation */ - int (*xRoundup)(int); /* Round up request size to allocation size */ - int (*xInit)(void*); /* Initialize the memory allocator */ - void (*xShutdown)(void*); /* Deinitialize the memory allocator */ - void *pAppData; /* Argument to xInit() and xShutdown() */ -}; - -/* -** CAPI3REF: Configuration Options -** EXPERIMENTAL -** -** These constants are the available integer configuration options that -** can be passed as the first argument to the [sqlite3_config()] interface. -** -** New configuration options may be added in future releases of SQLite. -** Existing configuration options might be discontinued. Applications -** should check the return code from [sqlite3_config()] to make sure that -** the call worked. The [sqlite3_config()] interface will return a -** non-zero [error code] if a discontinued or unsupported configuration option -** is invoked. -** -**
-**
SQLITE_CONFIG_SINGLETHREAD
-**
There are no arguments to this option. ^This option sets the -** [threading mode] to Single-thread. In other words, it disables -** all mutexing and puts SQLite into a mode where it can only be used -** by a single thread. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** it is not possible to change the [threading mode] from its default -** value of Single-thread and so [sqlite3_config()] will return -** [SQLITE_ERROR] if called with the SQLITE_CONFIG_SINGLETHREAD -** configuration option.
-** -**
SQLITE_CONFIG_MULTITHREAD
-**
There are no arguments to this option. ^This option sets the -** [threading mode] to Multi-thread. In other words, it disables -** mutexing on [database connection] and [prepared statement] objects. -** The application is responsible for serializing access to -** [database connections] and [prepared statements]. But other mutexes -** are enabled so that SQLite will be safe to use in a multi-threaded -** environment as long as no two threads attempt to use the same -** [database connection] at the same time. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** it is not possible to set the Multi-thread [threading mode] and -** [sqlite3_config()] will return [SQLITE_ERROR] if called with the -** SQLITE_CONFIG_MULTITHREAD configuration option.
-** -**
SQLITE_CONFIG_SERIALIZED
-**
There are no arguments to this option. ^This option sets the -** [threading mode] to Serialized. In other words, this option enables -** all mutexes including the recursive -** mutexes on [database connection] and [prepared statement] objects. -** In this mode (which is the default when SQLite is compiled with -** [SQLITE_THREADSAFE=1]) the SQLite library will itself serialize access -** to [database connections] and [prepared statements] so that the -** application is free to use the same [database connection] or the -** same [prepared statement] in different threads at the same time. -** ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** it is not possible to set the Serialized [threading mode] and -** [sqlite3_config()] will return [SQLITE_ERROR] if called with the -** SQLITE_CONFIG_SERIALIZED configuration option.
-** -**
SQLITE_CONFIG_MALLOC
-**
^(This option takes a single argument which is a pointer to an -** instance of the [sqlite3_mem_methods] structure. The argument specifies -** alternative low-level memory allocation routines to be used in place of -** the memory allocation routines built into SQLite.)^ ^SQLite makes -** its own private copy of the content of the [sqlite3_mem_methods] structure -** before the [sqlite3_config()] call returns.
-** -**
SQLITE_CONFIG_GETMALLOC
-**
^(This option takes a single argument which is a pointer to an -** instance of the [sqlite3_mem_methods] structure. The [sqlite3_mem_methods] -** structure is filled with the currently defined memory allocation routines.)^ -** This option can be used to overload the default memory allocation -** routines with a wrapper that simulations memory allocation failure or -** tracks memory usage, for example.
-** -**
SQLITE_CONFIG_MEMSTATUS
-**
^This option takes single argument of type int, interpreted as a -** boolean, which enables or disables the collection of memory allocation -** statistics. ^(When memory allocation statistics are disabled, the -** following SQLite interfaces become non-operational: -**
    -**
  • [sqlite3_memory_used()] -**
  • [sqlite3_memory_highwater()] -**
  • [sqlite3_soft_heap_limit()] -**
  • [sqlite3_status()] -**
)^ -** ^Memory allocation statistics are enabled by default unless SQLite is -** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory -** allocation statistics are disabled by default. -**
-** -**
SQLITE_CONFIG_SCRATCH
-**
^This option specifies a static memory buffer that SQLite can use for -** scratch memory. There are three arguments: A pointer an 8-byte -** aligned memory buffer from which the scrach allocations will be -** drawn, the size of each scratch allocation (sz), -** and the maximum number of scratch allocations (N). The sz -** argument must be a multiple of 16. The sz parameter should be a few bytes -** larger than the actual scratch space required due to internal overhead. -** The first argument must be a pointer to an 8-byte aligned buffer -** of at least sz*N bytes of memory. -** ^SQLite will use no more than one scratch buffer per thread. So -** N should be set to the expected maximum number of threads. ^SQLite will -** never require a scratch buffer that is more than 6 times the database -** page size. ^If SQLite needs needs additional scratch memory beyond -** what is provided by this configuration option, then -** [sqlite3_malloc()] will be used to obtain the memory needed.
-** -**
SQLITE_CONFIG_PAGECACHE
-**
^This option specifies a static memory buffer that SQLite can use for -** the database page cache with the default page cache implemenation. -** This configuration should not be used if an application-define page -** cache implementation is loaded using the SQLITE_CONFIG_PCACHE option. -** There are three arguments to this option: A pointer to 8-byte aligned -** memory, the size of each page buffer (sz), and the number of pages (N). -** The sz argument should be the size of the largest database page -** (a power of two between 512 and 32768) plus a little extra for each -** page header. ^The page header size is 20 to 40 bytes depending on -** the host architecture. ^It is harmless, apart from the wasted memory, -** to make sz a little too large. The first -** argument should point to an allocation of at least sz*N bytes of memory. -** ^SQLite will use the memory provided by the first argument to satisfy its -** memory needs for the first N pages that it adds to cache. ^If additional -** page cache memory is needed beyond what is provided by this option, then -** SQLite goes to [sqlite3_malloc()] for the additional storage space. -** ^The implementation might use one or more of the N buffers to hold -** memory accounting information. The pointer in the first argument must -** be aligned to an 8-byte boundary or subsequent behavior of SQLite -** will be undefined.
-** -**
SQLITE_CONFIG_HEAP
-**
^This option specifies a static memory buffer that SQLite will use -** for all of its dynamic memory allocation needs beyond those provided -** for by [SQLITE_CONFIG_SCRATCH] and [SQLITE_CONFIG_PAGECACHE]. -** There are three arguments: An 8-byte aligned pointer to the memory, -** the number of bytes in the memory buffer, and the minimum allocation size. -** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts -** to using its default memory allocator (the system malloc() implementation), -** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. ^If the -** memory pointer is not NULL and either [SQLITE_ENABLE_MEMSYS3] or -** [SQLITE_ENABLE_MEMSYS5] are defined, then the alternative memory -** allocator is engaged to handle all of SQLites memory allocation needs. -** The first pointer (the memory pointer) must be aligned to an 8-byte -** boundary or subsequent behavior of SQLite will be undefined.
-** -**
SQLITE_CONFIG_MUTEX
-**
^(This option takes a single argument which is a pointer to an -** instance of the [sqlite3_mutex_methods] structure. The argument specifies -** alternative low-level mutex routines to be used in place -** the mutex routines built into SQLite.)^ ^SQLite makes a copy of the -** content of the [sqlite3_mutex_methods] structure before the call to -** [sqlite3_config()] returns. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** the entire mutexing subsystem is omitted from the build and hence calls to -** [sqlite3_config()] with the SQLITE_CONFIG_MUTEX configuration option will -** return [SQLITE_ERROR].
-** -**
SQLITE_CONFIG_GETMUTEX
-**
^(This option takes a single argument which is a pointer to an -** instance of the [sqlite3_mutex_methods] structure. The -** [sqlite3_mutex_methods] -** structure is filled with the currently defined mutex routines.)^ -** This option can be used to overload the default mutex allocation -** routines with a wrapper used to track mutex usage for performance -** profiling or testing, for example. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** the entire mutexing subsystem is omitted from the build and hence calls to -** [sqlite3_config()] with the SQLITE_CONFIG_GETMUTEX configuration option will -** return [SQLITE_ERROR].
-** -**
SQLITE_CONFIG_LOOKASIDE
-**
^(This option takes two arguments that determine the default -** memory allocation for the lookaside memory allocator on each -** [database connection]. The first argument is the -** size of each lookaside buffer slot and the second is the number of -** slots allocated to each database connection.)^ ^(This option sets the -** default lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE] -** verb to [sqlite3_db_config()] can be used to change the lookaside -** configuration on individual connections.)^
-** -**
SQLITE_CONFIG_PCACHE
-**
^(This option takes a single argument which is a pointer to -** an [sqlite3_pcache_methods] object. This object specifies the interface -** to a custom page cache implementation.)^ ^SQLite makes a copy of the -** object and uses it for page cache memory allocations.
-** -**
SQLITE_CONFIG_GETPCACHE
-**
^(This option takes a single argument which is a pointer to an -** [sqlite3_pcache_methods] object. SQLite copies of the current -** page cache implementation into that object.)^
-** -**
-*/ -#define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */ -#define SQLITE_CONFIG_MULTITHREAD 2 /* nil */ -#define SQLITE_CONFIG_SERIALIZED 3 /* nil */ -#define SQLITE_CONFIG_MALLOC 4 /* sqlite3_mem_methods* */ -#define SQLITE_CONFIG_GETMALLOC 5 /* sqlite3_mem_methods* */ -#define SQLITE_CONFIG_SCRATCH 6 /* void*, int sz, int N */ -#define SQLITE_CONFIG_PAGECACHE 7 /* void*, int sz, int N */ -#define SQLITE_CONFIG_HEAP 8 /* void*, int nByte, int min */ -#define SQLITE_CONFIG_MEMSTATUS 9 /* boolean */ -#define SQLITE_CONFIG_MUTEX 10 /* sqlite3_mutex_methods* */ -#define SQLITE_CONFIG_GETMUTEX 11 /* sqlite3_mutex_methods* */ -/* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */ -#define SQLITE_CONFIG_LOOKASIDE 13 /* int int */ -#define SQLITE_CONFIG_PCACHE 14 /* sqlite3_pcache_methods* */ -#define SQLITE_CONFIG_GETPCACHE 15 /* sqlite3_pcache_methods* */ -#define SQLITE_CONFIG_LOG 16 /* xFunc, void* */ - -/* -** CAPI3REF: Configuration Options -** EXPERIMENTAL -** -** These constants are the available integer configuration options that -** can be passed as the second argument to the [sqlite3_db_config()] interface. -** -** New configuration options may be added in future releases of SQLite. -** Existing configuration options might be discontinued. Applications -** should check the return code from [sqlite3_db_config()] to make sure that -** the call worked. ^The [sqlite3_db_config()] interface will return a -** non-zero [error code] if a discontinued or unsupported configuration option -** is invoked. -** -**
-**
SQLITE_DBCONFIG_LOOKASIDE
-**
^This option takes three additional arguments that determine the -** [lookaside memory allocator] configuration for the [database connection]. -** ^The first argument (the third parameter to [sqlite3_db_config()] is a -** pointer to an memory buffer to use for lookaside memory. -** ^The first argument after the SQLITE_DBCONFIG_LOOKASIDE verb -** may be NULL in which case SQLite will allocate the -** lookaside buffer itself using [sqlite3_malloc()]. ^The second argument is the -** size of each lookaside buffer slot. ^The third argument is the number of -** slots. The size of the buffer in the first argument must be greater than -** or equal to the product of the second and third arguments. The buffer -** must be aligned to an 8-byte boundary. ^If the second argument to -** SQLITE_DBCONFIG_LOOKASIDE is not a multiple of 8, it is internally -** rounded down to the next smaller -** multiple of 8. See also: [SQLITE_CONFIG_LOOKASIDE]
-** -**
-*/ -#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */ - - -/* -** CAPI3REF: Enable Or Disable Extended Result Codes -** -** ^The sqlite3_extended_result_codes() routine enables or disables the -** [extended result codes] feature of SQLite. ^The extended result -** codes are disabled by default for historical compatibility. -*/ -SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff); - -/* -** CAPI3REF: Last Insert Rowid -** -** ^Each entry in an SQLite table has a unique 64-bit signed -** integer key called the [ROWID | "rowid"]. ^The rowid is always available -** as an undeclared column named ROWID, OID, or _ROWID_ as long as those -** names are not also used by explicitly declared columns. ^If -** the table has a column of type [INTEGER PRIMARY KEY] then that column -** is another alias for the rowid. -** -** ^This routine returns the [rowid] of the most recent -** successful [INSERT] into the database from the [database connection] -** in the first argument. ^If no successful [INSERT]s -** have ever occurred on that database connection, zero is returned. -** -** ^(If an [INSERT] occurs within a trigger, then the [rowid] of the inserted -** row is returned by this routine as long as the trigger is running. -** But once the trigger terminates, the value returned by this routine -** reverts to the last value inserted before the trigger fired.)^ -** -** ^An [INSERT] that fails due to a constraint violation is not a -** successful [INSERT] and does not change the value returned by this -** routine. ^Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK, -** and INSERT OR ABORT make no changes to the return value of this -** routine when their insertion fails. ^(When INSERT OR REPLACE -** encounters a constraint violation, it does not fail. The -** INSERT continues to completion after deleting rows that caused -** the constraint problem so INSERT OR REPLACE will always change -** the return value of this interface.)^ -** -** ^For the purposes of this routine, an [INSERT] is considered to -** be successful even if it is subsequently rolled back. -** -** This function is accessible to SQL statements via the -** [last_insert_rowid() SQL function]. -** -** If a separate thread performs a new [INSERT] on the same -** database connection while the [sqlite3_last_insert_rowid()] -** function is running and thus changes the last insert [rowid], -** then the value returned by [sqlite3_last_insert_rowid()] is -** unpredictable and might not equal either the old or the new -** last insert [rowid]. -*/ -SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*); - -/* -** CAPI3REF: Count The Number Of Rows Modified -** -** ^This function returns the number of database rows that were changed -** or inserted or deleted by the most recently completed SQL statement -** on the [database connection] specified by the first parameter. -** ^(Only changes that are directly specified by the [INSERT], [UPDATE], -** or [DELETE] statement are counted. Auxiliary changes caused by -** triggers or [foreign key actions] are not counted.)^ Use the -** [sqlite3_total_changes()] function to find the total number of changes -** including changes caused by triggers and foreign key actions. -** -** ^Changes to a view that are simulated by an [INSTEAD OF trigger] -** are not counted. Only real table changes are counted. -** -** ^(A "row change" is a change to a single row of a single table -** caused by an INSERT, DELETE, or UPDATE statement. Rows that -** are changed as side effects of [REPLACE] constraint resolution, -** rollback, ABORT processing, [DROP TABLE], or by any other -** mechanisms do not count as direct row changes.)^ -** -** A "trigger context" is a scope of execution that begins and -** ends with the script of a [CREATE TRIGGER | trigger]. -** Most SQL statements are -** evaluated outside of any trigger. This is the "top level" -** trigger context. If a trigger fires from the top level, a -** new trigger context is entered for the duration of that one -** trigger. Subtriggers create subcontexts for their duration. -** -** ^Calling [sqlite3_exec()] or [sqlite3_step()] recursively does -** not create a new trigger context. -** -** ^This function returns the number of direct row changes in the -** most recent INSERT, UPDATE, or DELETE statement within the same -** trigger context. -** -** ^Thus, when called from the top level, this function returns the -** number of changes in the most recent INSERT, UPDATE, or DELETE -** that also occurred at the top level. ^(Within the body of a trigger, -** the sqlite3_changes() interface can be called to find the number of -** changes in the most recently completed INSERT, UPDATE, or DELETE -** statement within the body of the same trigger. -** However, the number returned does not include changes -** caused by subtriggers since those have their own context.)^ -** -** See also the [sqlite3_total_changes()] interface, the -** [count_changes pragma], and the [changes() SQL function]. -** -** If a separate thread makes changes on the same database connection -** while [sqlite3_changes()] is running then the value returned -** is unpredictable and not meaningful. -*/ -SQLITE_API int sqlite3_changes(sqlite3*); - -/* -** CAPI3REF: Total Number Of Rows Modified -** -** ^This function returns the number of row changes caused by [INSERT], -** [UPDATE] or [DELETE] statements since the [database connection] was opened. -** ^(The count returned by sqlite3_total_changes() includes all changes -** from all [CREATE TRIGGER | trigger] contexts and changes made by -** [foreign key actions]. However, -** the count does not include changes used to implement [REPLACE] constraints, -** do rollbacks or ABORT processing, or [DROP TABLE] processing. The -** count does not include rows of views that fire an [INSTEAD OF trigger], -** though if the INSTEAD OF trigger makes changes of its own, those changes -** are counted.)^ -** ^The sqlite3_total_changes() function counts the changes as soon as -** the statement that makes them is completed (when the statement handle -** is passed to [sqlite3_reset()] or [sqlite3_finalize()]). -** -** See also the [sqlite3_changes()] interface, the -** [count_changes pragma], and the [total_changes() SQL function]. -** -** If a separate thread makes changes on the same database connection -** while [sqlite3_total_changes()] is running then the value -** returned is unpredictable and not meaningful. -*/ -SQLITE_API int sqlite3_total_changes(sqlite3*); - -/* -** CAPI3REF: Interrupt A Long-Running Query -** -** ^This function causes any pending database operation to abort and -** return at its earliest opportunity. This routine is typically -** called in response to a user action such as pressing "Cancel" -** or Ctrl-C where the user wants a long query operation to halt -** immediately. -** -** ^It is safe to call this routine from a thread different from the -** thread that is currently running the database operation. But it -** is not safe to call this routine with a [database connection] that -** is closed or might close before sqlite3_interrupt() returns. -** -** ^If an SQL operation is very nearly finished at the time when -** sqlite3_interrupt() is called, then it might not have an opportunity -** to be interrupted and might continue to completion. -** -** ^An SQL operation that is interrupted will return [SQLITE_INTERRUPT]. -** ^If the interrupted SQL operation is an INSERT, UPDATE, or DELETE -** that is inside an explicit transaction, then the entire transaction -** will be rolled back automatically. -** -** ^The sqlite3_interrupt(D) call is in effect until all currently running -** SQL statements on [database connection] D complete. ^Any new SQL statements -** that are started after the sqlite3_interrupt() call and before the -** running statements reaches zero are interrupted as if they had been -** running prior to the sqlite3_interrupt() call. ^New SQL statements -** that are started after the running statement count reaches zero are -** not effected by the sqlite3_interrupt(). -** ^A call to sqlite3_interrupt(D) that occurs when there are no running -** SQL statements is a no-op and has no effect on SQL statements -** that are started after the sqlite3_interrupt() call returns. -** -** If the database connection closes while [sqlite3_interrupt()] -** is running then bad things will likely happen. -*/ -SQLITE_API void sqlite3_interrupt(sqlite3*); - -/* -** CAPI3REF: Determine If An SQL Statement Is Complete -** -** These routines are useful during command-line input to determine if the -** currently entered text seems to form a complete SQL statement or -** if additional input is needed before sending the text into -** SQLite for parsing. ^These routines return 1 if the input string -** appears to be a complete SQL statement. ^A statement is judged to be -** complete if it ends with a semicolon token and is not a prefix of a -** well-formed CREATE TRIGGER statement. ^Semicolons that are embedded within -** string literals or quoted identifier names or comments are not -** independent tokens (they are part of the token in which they are -** embedded) and thus do not count as a statement terminator. ^Whitespace -** and comments that follow the final semicolon are ignored. -** -** ^These routines return 0 if the statement is incomplete. ^If a -** memory allocation fails, then SQLITE_NOMEM is returned. -** -** ^These routines do not parse the SQL statements thus -** will not detect syntactically incorrect SQL. -** -** ^(If SQLite has not been initialized using [sqlite3_initialize()] prior -** to invoking sqlite3_complete16() then sqlite3_initialize() is invoked -** automatically by sqlite3_complete16(). If that initialization fails, -** then the return value from sqlite3_complete16() will be non-zero -** regardless of whether or not the input SQL is complete.)^ -** -** The input to [sqlite3_complete()] must be a zero-terminated -** UTF-8 string. -** -** The input to [sqlite3_complete16()] must be a zero-terminated -** UTF-16 string in native byte order. -*/ -SQLITE_API int sqlite3_complete(const char *sql); -SQLITE_API int sqlite3_complete16(const void *sql); - -/* -** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors -** -** ^This routine sets a callback function that might be invoked whenever -** an attempt is made to open a database table that another thread -** or process has locked. -** -** ^If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] -** is returned immediately upon encountering the lock. ^If the busy callback -** is not NULL, then the callback might be invoked with two arguments. -** -** ^The first argument to the busy handler is a copy of the void* pointer which -** is the third argument to sqlite3_busy_handler(). ^The second argument to -** the busy handler callback is the number of times that the busy handler has -** been invoked for this locking event. ^If the -** busy callback returns 0, then no additional attempts are made to -** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned. -** ^If the callback returns non-zero, then another attempt -** is made to open the database for reading and the cycle repeats. -** -** The presence of a busy handler does not guarantee that it will be invoked -** when there is lock contention. ^If SQLite determines that invoking the busy -** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY] -** or [SQLITE_IOERR_BLOCKED] instead of invoking the busy handler. -** Consider a scenario where one process is holding a read lock that -** it is trying to promote to a reserved lock and -** a second process is holding a reserved lock that it is trying -** to promote to an exclusive lock. The first process cannot proceed -** because it is blocked by the second and the second process cannot -** proceed because it is blocked by the first. If both processes -** invoke the busy handlers, neither will make any progress. Therefore, -** SQLite returns [SQLITE_BUSY] for the first process, hoping that this -** will induce the first process to release its read lock and allow -** the second process to proceed. -** -** ^The default busy callback is NULL. -** -** ^The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED] -** when SQLite is in the middle of a large transaction where all the -** changes will not fit into the in-memory cache. SQLite will -** already hold a RESERVED lock on the database file, but it needs -** to promote this lock to EXCLUSIVE so that it can spill cache -** pages into the database file without harm to concurrent -** readers. ^If it is unable to promote the lock, then the in-memory -** cache will be left in an inconsistent state and so the error -** code is promoted from the relatively benign [SQLITE_BUSY] to -** the more severe [SQLITE_IOERR_BLOCKED]. ^This error code promotion -** forces an automatic rollback of the changes. See the -** -** CorruptionFollowingBusyError wiki page for a discussion of why -** this is important. -** -** ^(There can only be a single busy handler defined for each -** [database connection]. Setting a new busy handler clears any -** previously set handler.)^ ^Note that calling [sqlite3_busy_timeout()] -** will also set or clear the busy handler. -** -** The busy callback should not take any actions which modify the -** database connection that invoked the busy handler. Any such actions -** result in undefined behavior. -** -** A busy handler must not close the database connection -** or [prepared statement] that invoked the busy handler. -*/ -SQLITE_API int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*); - -/* -** CAPI3REF: Set A Busy Timeout -** -** ^This routine sets a [sqlite3_busy_handler | busy handler] that sleeps -** for a specified amount of time when a table is locked. ^The handler -** will sleep multiple times until at least "ms" milliseconds of sleeping -** have accumulated. ^After at least "ms" milliseconds of sleeping, -** the handler returns 0 which causes [sqlite3_step()] to return -** [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]. -** -** ^Calling this routine with an argument less than or equal to zero -** turns off all busy handlers. -** -** ^(There can only be a single busy handler for a particular -** [database connection] any any given moment. If another busy handler -** was defined (using [sqlite3_busy_handler()]) prior to calling -** this routine, that other busy handler is cleared.)^ -*/ -SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms); - -/* -** CAPI3REF: Convenience Routines For Running Queries -** -** Definition: A result table is memory data structure created by the -** [sqlite3_get_table()] interface. A result table records the -** complete query results from one or more queries. -** -** The table conceptually has a number of rows and columns. But -** these numbers are not part of the result table itself. These -** numbers are obtained separately. Let N be the number of rows -** and M be the number of columns. -** -** A result table is an array of pointers to zero-terminated UTF-8 strings. -** There are (N+1)*M elements in the array. The first M pointers point -** to zero-terminated strings that contain the names of the columns. -** The remaining entries all point to query results. NULL values result -** in NULL pointers. All other values are in their UTF-8 zero-terminated -** string representation as returned by [sqlite3_column_text()]. -** -** A result table might consist of one or more memory allocations. -** It is not safe to pass a result table directly to [sqlite3_free()]. -** A result table should be deallocated using [sqlite3_free_table()]. -** -** As an example of the result table format, suppose a query result -** is as follows: -** -** 
-**        Name        | Age
-**        -----------------------
-**        Alice       | 43
-**        Bob         | 28
-**        Cindy       | 21
-**
-** -** There are two column (M==2) and three rows (N==3). Thus the -** result table has 8 entries. Suppose the result table is stored -** in an array names azResult. Then azResult holds this content: -** -** 
-**        azResult[0] = "Name";
-**        azResult[1] = "Age";
-**        azResult[2] = "Alice";
-**        azResult[3] = "43";
-**        azResult[4] = "Bob";
-**        azResult[5] = "28";
-**        azResult[6] = "Cindy";
-**        azResult[7] = "21";
-**
-** -** ^The sqlite3_get_table() function evaluates one or more -** semicolon-separated SQL statements in the zero-terminated UTF-8 -** string of its 2nd parameter and returns a result table to the -** pointer given in its 3rd parameter. -** -** After the application has finished with the result from sqlite3_get_table(), -** it should pass the result table pointer to sqlite3_free_table() in order to -** release the memory that was malloced. Because of the way the -** [sqlite3_malloc()] happens within sqlite3_get_table(), the calling -** function must not try to call [sqlite3_free()] directly. Only -** [sqlite3_free_table()] is able to release the memory properly and safely. -** -** ^(The sqlite3_get_table() interface is implemented as a wrapper around -** [sqlite3_exec()]. The sqlite3_get_table() routine does not have access -** to any internal data structures of SQLite. It uses only the public -** interface defined here. As a consequence, errors that occur in the -** wrapper layer outside of the internal [sqlite3_exec()] call are not -** reflected in subsequent calls to [sqlite3_errcode()] or -** [sqlite3_errmsg()].)^ -*/ -SQLITE_API int sqlite3_get_table( - sqlite3 *db, /* An open database */ - const char *zSql, /* SQL to be evaluated */ - char ***pazResult, /* Results of the query */ - int *pnRow, /* Number of result rows written here */ - int *pnColumn, /* Number of result columns written here */ - char **pzErrmsg /* Error msg written here */ -); -SQLITE_API void sqlite3_free_table(char **result); - -/* -** CAPI3REF: Formatted String Printing Functions -** -** These routines are work-alikes of the "printf()" family of functions -** from the standard C library. -** -** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their -** results into memory obtained from [sqlite3_malloc()]. -** The strings returned by these two routines should be -** released by [sqlite3_free()]. ^Both routines return a -** NULL pointer if [sqlite3_malloc()] is unable to allocate enough -** memory to hold the resulting string. -** -** ^(In sqlite3_snprintf() routine is similar to "snprintf()" from -** the standard C library. The result is written into the -** buffer supplied as the second parameter whose size is given by -** the first parameter. Note that the order of the -** first two parameters is reversed from snprintf().)^ This is an -** historical accident that cannot be fixed without breaking -** backwards compatibility. ^(Note also that sqlite3_snprintf() -** returns a pointer to its buffer instead of the number of -** characters actually written into the buffer.)^ We admit that -** the number of characters written would be a more useful return -** value but we cannot change the implementation of sqlite3_snprintf() -** now without breaking compatibility. -** -** ^As long as the buffer size is greater than zero, sqlite3_snprintf() -** guarantees that the buffer is always zero-terminated. ^The first -** parameter "n" is the total size of the buffer, including space for -** the zero terminator. So the longest string that can be completely -** written will be n-1 characters. -** -** These routines all implement some additional formatting -** options that are useful for constructing SQL statements. -** All of the usual printf() formatting options apply. In addition, there -** is are "%q", "%Q", and "%z" options. -** -** ^(The %q option works like %s in that it substitutes a null-terminated -** string from the argument list. But %q also doubles every '\'' character. -** %q is designed for use inside a string literal.)^ By doubling each '\'' -** character it escapes that character and allows it to be inserted into -** the string. -** -** For example, assume the string variable zText contains text as follows: -** -** 
-**  char *zText = "It's a happy day!";
-**
-** -** One can use this text in an SQL statement as follows: -** -** 
-**  char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES('%q')", zText);
-**  sqlite3_exec(db, zSQL, 0, 0, 0);
-**  sqlite3_free(zSQL);
-**
-** -** Because the %q format string is used, the '\'' character in zText -** is escaped and the SQL generated is as follows: -** -** 
-**  INSERT INTO table1 VALUES('It''s a happy day!')
-**
-** -** This is correct. Had we used %s instead of %q, the generated SQL -** would have looked like this: -** -** 
-**  INSERT INTO table1 VALUES('It's a happy day!');
-**
-** -** This second example is an SQL syntax error. As a general rule you should -** always use %q instead of %s when inserting text into a string literal. -** -** ^(The %Q option works like %q except it also adds single quotes around -** the outside of the total string. Additionally, if the parameter in the -** argument list is a NULL pointer, %Q substitutes the text "NULL" (without -** single quotes).)^ So, for example, one could say: -** -** 
-**  char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText);
-**  sqlite3_exec(db, zSQL, 0, 0, 0);
-**  sqlite3_free(zSQL);
-**
-** -** The code above will render a correct SQL statement in the zSQL -** variable even if the zText variable is a NULL pointer. -** -** ^(The "%z" formatting option works like "%s" but with the -** addition that after the string has been read and copied into -** the result, [sqlite3_free()] is called on the input string.)^ -*/ -SQLITE_API char *sqlite3_mprintf(const char*,...); -SQLITE_API char *sqlite3_vmprintf(const char*, va_list); -SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...); - -/* -** CAPI3REF: Memory Allocation Subsystem -** -** The SQLite core uses these three routines for all of its own -** internal memory allocation needs. "Core" in the previous sentence -** does not include operating-system specific VFS implementation. The -** Windows VFS uses native malloc() and free() for some operations. -** -** ^The sqlite3_malloc() routine returns a pointer to a block -** of memory at least N bytes in length, where N is the parameter. -** ^If sqlite3_malloc() is unable to obtain sufficient free -** memory, it returns a NULL pointer. ^If the parameter N to -** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns -** a NULL pointer. -** -** ^Calling sqlite3_free() with a pointer previously returned -** by sqlite3_malloc() or sqlite3_realloc() releases that memory so -** that it might be reused. ^The sqlite3_free() routine is -** a no-op if is called with a NULL pointer. Passing a NULL pointer -** to sqlite3_free() is harmless. After being freed, memory -** should neither be read nor written. Even reading previously freed -** memory might result in a segmentation fault or other severe error. -** Memory corruption, a segmentation fault, or other severe error -** might result if sqlite3_free() is called with a non-NULL pointer that -** was not obtained from sqlite3_malloc() or sqlite3_realloc(). -** -** ^(The sqlite3_realloc() interface attempts to resize a -** prior memory allocation to be at least N bytes, where N is the -** second parameter. The memory allocation to be resized is the first -** parameter.)^ ^ If the first parameter to sqlite3_realloc() -** is a NULL pointer then its behavior is identical to calling -** sqlite3_malloc(N) where N is the second parameter to sqlite3_realloc(). -** ^If the second parameter to sqlite3_realloc() is zero or -** negative then the behavior is exactly the same as calling -** sqlite3_free(P) where P is the first parameter to sqlite3_realloc(). -** ^sqlite3_realloc() returns a pointer to a memory allocation -** of at least N bytes in size or NULL if sufficient memory is unavailable. -** ^If M is the size of the prior allocation, then min(N,M) bytes -** of the prior allocation are copied into the beginning of buffer returned -** by sqlite3_realloc() and the prior allocation is freed. -** ^If sqlite3_realloc() returns NULL, then the prior allocation -** is not freed. -** -** ^The memory returned by sqlite3_malloc() and sqlite3_realloc() -** is always aligned to at least an 8 byte boundary. -** -** In SQLite version 3.5.0 and 3.5.1, it was possible to define -** the SQLITE_OMIT_MEMORY_ALLOCATION which would cause the built-in -** implementation of these routines to be omitted. That capability -** is no longer provided. Only built-in memory allocators can be used. -** -** The Windows OS interface layer calls -** the system malloc() and free() directly when converting -** filenames between the UTF-8 encoding used by SQLite -** and whatever filename encoding is used by the particular Windows -** installation. Memory allocation errors are detected, but -** they are reported back as [SQLITE_CANTOPEN] or -** [SQLITE_IOERR] rather than [SQLITE_NOMEM]. -** -** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()] -** must be either NULL or else pointers obtained from a prior -** invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that have -** not yet been released. -** -** The application must not read or write any part of -** a block of memory after it has been released using -** [sqlite3_free()] or [sqlite3_realloc()]. -*/ -SQLITE_API void *sqlite3_malloc(int); -SQLITE_API void *sqlite3_realloc(void*, int); -SQLITE_API void sqlite3_free(void*); - -/* -** CAPI3REF: Memory Allocator Statistics -** -** SQLite provides these two interfaces for reporting on the status -** of the [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()] -** routines, which form the built-in memory allocation subsystem. -** -** ^The [sqlite3_memory_used()] routine returns the number of bytes -** of memory currently outstanding (malloced but not freed). -** ^The [sqlite3_memory_highwater()] routine returns the maximum -** value of [sqlite3_memory_used()] since the high-water mark -** was last reset. ^The values returned by [sqlite3_memory_used()] and -** [sqlite3_memory_highwater()] include any overhead -** added by SQLite in its implementation of [sqlite3_malloc()], -** but not overhead added by the any underlying system library -** routines that [sqlite3_malloc()] may call. -** -** ^The memory high-water mark is reset to the current value of -** [sqlite3_memory_used()] if and only if the parameter to -** [sqlite3_memory_highwater()] is true. ^The value returned -** by [sqlite3_memory_highwater(1)] is the high-water mark -** prior to the reset. -*/ -SQLITE_API sqlite3_int64 sqlite3_memory_used(void); -SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag); - -/* -** CAPI3REF: Pseudo-Random Number Generator -** -** SQLite contains a high-quality pseudo-random number generator (PRNG) used to -** select random [ROWID | ROWIDs] when inserting new records into a table that -** already uses the largest possible [ROWID]. The PRNG is also used for -** the build-in random() and randomblob() SQL functions. This interface allows -** applications to access the same PRNG for other purposes. -** -** ^A call to this routine stores N bytes of randomness into buffer P. -** -** ^The first time this routine is invoked (either internally or by -** the application) the PRNG is seeded using randomness obtained -** from the xRandomness method of the default [sqlite3_vfs] object. -** ^On all subsequent invocations, the pseudo-randomness is generated -** internally and without recourse to the [sqlite3_vfs] xRandomness -** method. -*/ -SQLITE_API void sqlite3_randomness(int N, void *P); - -/* -** CAPI3REF: Compile-Time Authorization Callbacks -** -** ^This routine registers a authorizer callback with a particular -** [database connection], supplied in the first argument. -** ^The authorizer callback is invoked as SQL statements are being compiled -** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()], -** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()]. ^At various -** points during the compilation process, as logic is being created -** to perform various actions, the authorizer callback is invoked to -** see if those actions are allowed. ^The authorizer callback should -** return [SQLITE_OK] to allow the action, [SQLITE_IGNORE] to disallow the -** specific action but allow the SQL statement to continue to be -** compiled, or [SQLITE_DENY] to cause the entire SQL statement to be -** rejected with an error. ^If the authorizer callback returns -** any value other than [SQLITE_IGNORE], [SQLITE_OK], or [SQLITE_DENY] -** then the [sqlite3_prepare_v2()] or equivalent call that triggered -** the authorizer will fail with an error message. -** -** When the callback returns [SQLITE_OK], that means the operation -** requested is ok. ^When the callback returns [SQLITE_DENY], the -** [sqlite3_prepare_v2()] or equivalent call that triggered the -** authorizer will fail with an error message explaining that -** access is denied. -** -** ^The first parameter to the authorizer callback is a copy of the third -** parameter to the sqlite3_set_authorizer() interface. ^The second parameter -** to the callback is an integer [SQLITE_COPY | action code] that specifies -** the particular action to be authorized. ^The third through sixth parameters -** to the callback are zero-terminated strings that contain additional -** details about the action to be authorized. -** -** ^If the action code is [SQLITE_READ] -** and the callback returns [SQLITE_IGNORE] then the -** [prepared statement] statement is constructed to substitute -** a NULL value in place of the table column that would have -** been read if [SQLITE_OK] had been returned. The [SQLITE_IGNORE] -** return can be used to deny an untrusted user access to individual -** columns of a table. -** ^If the action code is [SQLITE_DELETE] and the callback returns -** [SQLITE_IGNORE] then the [DELETE] operation proceeds but the -** [truncate optimization] is disabled and all rows are deleted individually. -** -** An authorizer is used when [sqlite3_prepare | preparing] -** SQL statements from an untrusted source, to ensure that the SQL statements -** do not try to access data they are not allowed to see, or that they do not -** try to execute malicious statements that damage the database. For -** example, an application may allow a user to enter arbitrary -** SQL queries for evaluation by a database. But the application does -** not want the user to be able to make arbitrary changes to the -** database. An authorizer could then be put in place while the -** user-entered SQL is being [sqlite3_prepare | prepared] that -** disallows everything except [SELECT] statements. -** -** Applications that need to process SQL from untrusted sources -** might also consider lowering resource limits using [sqlite3_limit()] -** and limiting database size using the [max_page_count] [PRAGMA] -** in addition to using an authorizer. -** -** ^(Only a single authorizer can be in place on a database connection -** at a time. Each call to sqlite3_set_authorizer overrides the -** previous call.)^ ^Disable the authorizer by installing a NULL callback. -** The authorizer is disabled by default. -** -** The authorizer callback must not do anything that will modify -** the database connection that invoked the authorizer callback. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -** ^When [sqlite3_prepare_v2()] is used to prepare a statement, the -** statement might be re-prepared during [sqlite3_step()] due to a -** schema change. Hence, the application should ensure that the -** correct authorizer callback remains in place during the [sqlite3_step()]. -** -** ^Note that the authorizer callback is invoked only during -** [sqlite3_prepare()] or its variants. Authorization is not -** performed during statement evaluation in [sqlite3_step()], unless -** as stated in the previous paragraph, sqlite3_step() invokes -** sqlite3_prepare_v2() to reprepare a statement after a schema change. -*/ -SQLITE_API int sqlite3_set_authorizer( - sqlite3*, - int (*xAuth)(void*,int,const char*,const char*,const char*,const char*), - void *pUserData -); - -/* -** CAPI3REF: Authorizer Return Codes -** -** The [sqlite3_set_authorizer | authorizer callback function] must -** return either [SQLITE_OK] or one of these two constants in order -** to signal SQLite whether or not the action is permitted. See the -** [sqlite3_set_authorizer | authorizer documentation] for additional -** information. -*/ -#define SQLITE_DENY 1 /* Abort the SQL statement with an error */ -#define SQLITE_IGNORE 2 /* Don't allow access, but don't generate an error */ - -/* -** CAPI3REF: Authorizer Action Codes -** -** The [sqlite3_set_authorizer()] interface registers a callback function -** that is invoked to authorize certain SQL statement actions. The -** second parameter to the callback is an integer code that specifies -** what action is being authorized. These are the integer action codes that -** the authorizer callback may be passed. -** -** These action code values signify what kind of operation is to be -** authorized. The 3rd and 4th parameters to the authorization -** callback function will be parameters or NULL depending on which of these -** codes is used as the second parameter. ^(The 5th parameter to the -** authorizer callback is the name of the database ("main", "temp", -** etc.) if applicable.)^ ^The 6th parameter to the authorizer callback -** is the name of the inner-most trigger or view that is responsible for -** the access attempt or NULL if this access attempt is directly from -** top-level SQL code. -*/ -/******************************************* 3rd ************ 4th ***********/ -#define SQLITE_CREATE_INDEX 1 /* Index Name Table Name */ -#define SQLITE_CREATE_TABLE 2 /* Table Name NULL */ -#define SQLITE_CREATE_TEMP_INDEX 3 /* Index Name Table Name */ -#define SQLITE_CREATE_TEMP_TABLE 4 /* Table Name NULL */ -#define SQLITE_CREATE_TEMP_TRIGGER 5 /* Trigger Name Table Name */ -#define SQLITE_CREATE_TEMP_VIEW 6 /* View Name NULL */ -#define SQLITE_CREATE_TRIGGER 7 /* Trigger Name Table Name */ -#define SQLITE_CREATE_VIEW 8 /* View Name NULL */ -#define SQLITE_DELETE 9 /* Table Name NULL */ -#define SQLITE_DROP_INDEX 10 /* Index Name Table Name */ -#define SQLITE_DROP_TABLE 11 /* Table Name NULL */ -#define SQLITE_DROP_TEMP_INDEX 12 /* Index Name Table Name */ -#define SQLITE_DROP_TEMP_TABLE 13 /* Table Name NULL */ -#define SQLITE_DROP_TEMP_TRIGGER 14 /* Trigger Name Table Name */ -#define SQLITE_DROP_TEMP_VIEW 15 /* View Name NULL */ -#define SQLITE_DROP_TRIGGER 16 /* Trigger Name Table Name */ -#define SQLITE_DROP_VIEW 17 /* View Name NULL */ -#define SQLITE_INSERT 18 /* Table Name NULL */ -#define SQLITE_PRAGMA 19 /* Pragma Name 1st arg or NULL */ -#define SQLITE_READ 20 /* Table Name Column Name */ -#define SQLITE_SELECT 21 /* NULL NULL */ -#define SQLITE_TRANSACTION 22 /* Operation NULL */ -#define SQLITE_UPDATE 23 /* Table Name Column Name */ -#define SQLITE_ATTACH 24 /* Filename NULL */ -#define SQLITE_DETACH 25 /* Database Name NULL */ -#define SQLITE_ALTER_TABLE 26 /* Database Name Table Name */ -#define SQLITE_REINDEX 27 /* Index Name NULL */ -#define SQLITE_ANALYZE 28 /* Table Name NULL */ -#define SQLITE_CREATE_VTABLE 29 /* Table Name Module Name */ -#define SQLITE_DROP_VTABLE 30 /* Table Name Module Name */ -#define SQLITE_FUNCTION 31 /* NULL Function Name */ -#define SQLITE_SAVEPOINT 32 /* Operation Savepoint Name */ -#define SQLITE_COPY 0 /* No longer used */ - -/* -** CAPI3REF: Tracing And Profiling Functions -** EXPERIMENTAL -** -** These routines register callback functions that can be used for -** tracing and profiling the execution of SQL statements. -** -** ^The callback function registered by sqlite3_trace() is invoked at -** various times when an SQL statement is being run by [sqlite3_step()]. -** ^The sqlite3_trace() callback is invoked with a UTF-8 rendering of the -** SQL statement text as the statement first begins executing. -** ^(Additional sqlite3_trace() callbacks might occur -** as each triggered subprogram is entered. The callbacks for triggers -** contain a UTF-8 SQL comment that identifies the trigger.)^ -** -** ^The callback function registered by sqlite3_profile() is invoked -** as each SQL statement finishes. ^The profile callback contains -** the original statement text and an estimate of wall-clock time -** of how long that statement took to run. -*/ -SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*); -SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_profile(sqlite3*, - void(*xProfile)(void*,const char*,sqlite3_uint64), void*); - -/* -** CAPI3REF: Query Progress Callbacks -** -** ^This routine configures a callback function - the -** progress callback - that is invoked periodically during long -** running calls to [sqlite3_exec()], [sqlite3_step()] and -** [sqlite3_get_table()]. An example use for this -** interface is to keep a GUI updated during a large query. -** -** ^If the progress callback returns non-zero, the operation is -** interrupted. This feature can be used to implement a -** "Cancel" button on a GUI progress dialog box. -** -** The progress handler must not do anything that will modify -** the database connection that invoked the progress handler. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -*/ -SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); - -/* -** CAPI3REF: Opening A New Database Connection -** -** ^These routines open an SQLite database file whose name is given by the -** filename argument. ^The filename argument is interpreted as UTF-8 for -** sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte -** order for sqlite3_open16(). ^(A [database connection] handle is usually -** returned in *ppDb, even if an error occurs. The only exception is that -** if SQLite is unable to allocate memory to hold the [sqlite3] object, -** a NULL will be written into *ppDb instead of a pointer to the [sqlite3] -** object.)^ ^(If the database is opened (and/or created) successfully, then -** [SQLITE_OK] is returned. Otherwise an [error code] is returned.)^ ^The -** [sqlite3_errmsg()] or [sqlite3_errmsg16()] routines can be used to obtain -** an English language description of the error following a failure of any -** of the sqlite3_open() routines. -** -** ^The default encoding for the database will be UTF-8 if -** sqlite3_open() or sqlite3_open_v2() is called and -** UTF-16 in the native byte order if sqlite3_open16() is used. -** -** Whether or not an error occurs when it is opened, resources -** associated with the [database connection] handle should be released by -** passing it to [sqlite3_close()] when it is no longer required. -** -** The sqlite3_open_v2() interface works like sqlite3_open() -** except that it accepts two additional parameters for additional control -** over the new database connection. ^(The flags parameter to -** sqlite3_open_v2() can take one of -** the following three values, optionally combined with the -** [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX], [SQLITE_OPEN_SHAREDCACHE], -** and/or [SQLITE_OPEN_PRIVATECACHE] flags:)^ -** -**
-** ^(
[SQLITE_OPEN_READONLY]
-**
The database is opened in read-only mode. If the database does not -** already exist, an error is returned.
)^ -** -** ^(
[SQLITE_OPEN_READWRITE]
-**
The database is opened for reading and writing if possible, or reading -** only if the file is write protected by the operating system. In either -** case the database must already exist, otherwise an error is returned.
)^ -** -** ^(
[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]
-**
The database is opened for reading and writing, and is creates it if -** it does not already exist. This is the behavior that is always used for -** sqlite3_open() and sqlite3_open16().
)^ -**
-** -** If the 3rd parameter to sqlite3_open_v2() is not one of the -** combinations shown above or one of the combinations shown above combined -** with the [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX], -** [SQLITE_OPEN_SHAREDCACHE] and/or [SQLITE_OPEN_SHAREDCACHE] flags, -** then the behavior is undefined. -** -** ^If the [SQLITE_OPEN_NOMUTEX] flag is set, then the database connection -** opens in the multi-thread [threading mode] as long as the single-thread -** mode has not been set at compile-time or start-time. ^If the -** [SQLITE_OPEN_FULLMUTEX] flag is set then the database connection opens -** in the serialized [threading mode] unless single-thread was -** previously selected at compile-time or start-time. -** ^The [SQLITE_OPEN_SHAREDCACHE] flag causes the database connection to be -** eligible to use [shared cache mode], regardless of whether or not shared -** cache is enabled using [sqlite3_enable_shared_cache()]. ^The -** [SQLITE_OPEN_PRIVATECACHE] flag causes the database connection to not -** participate in [shared cache mode] even if it is enabled. -** -** ^If the filename is ":memory:", then a private, temporary in-memory database -** is created for the connection. ^This in-memory database will vanish when -** the database connection is closed. Future versions of SQLite might -** make use of additional special filenames that begin with the ":" character. -** It is recommended that when a database filename actually does begin with -** a ":" character you should prefix the filename with a pathname such as -** "./" to avoid ambiguity. -** -** ^If the filename is an empty string, then a private, temporary -** on-disk database will be created. ^This private database will be -** automatically deleted as soon as the database connection is closed. -** -** ^The fourth parameter to sqlite3_open_v2() is the name of the -** [sqlite3_vfs] object that defines the operating system interface that -** the new database connection should use. ^If the fourth parameter is -** a NULL pointer then the default [sqlite3_vfs] object is used. -** -** Note to Windows users: The encoding used for the filename argument -** of sqlite3_open() and sqlite3_open_v2() must be UTF-8, not whatever -** codepage is currently defined. Filenames containing international -** characters must be converted to UTF-8 prior to passing them into -** sqlite3_open() or sqlite3_open_v2(). -*/ -SQLITE_API int sqlite3_open( - const char *filename, /* Database filename (UTF-8) */ - sqlite3 **ppDb /* OUT: SQLite db handle */ -); -SQLITE_API int sqlite3_open16( - const void *filename, /* Database filename (UTF-16) */ - sqlite3 **ppDb /* OUT: SQLite db handle */ -); -SQLITE_API int sqlite3_open_v2( - const char *filename, /* Database filename (UTF-8) */ - sqlite3 **ppDb, /* OUT: SQLite db handle */ - int flags, /* Flags */ - const char *zVfs /* Name of VFS module to use */ -); - -/* -** CAPI3REF: Error Codes And Messages -** -** ^The sqlite3_errcode() interface returns the numeric [result code] or -** [extended result code] for the most recent failed sqlite3_* API call -** associated with a [database connection]. If a prior API call failed -** but the most recent API call succeeded, the return value from -** sqlite3_errcode() is undefined. ^The sqlite3_extended_errcode() -** interface is the same except that it always returns the -** [extended result code] even when extended result codes are -** disabled. -** -** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language -** text that describes the error, as either UTF-8 or UTF-16 respectively. -** ^(Memory to hold the error message string is managed internally. -** The application does not need to worry about freeing the result. -** However, the error string might be overwritten or deallocated by -** subsequent calls to other SQLite interface functions.)^ -** -** When the serialized [threading mode] is in use, it might be the -** case that a second error occurs on a separate thread in between -** the time of the first error and the call to these interfaces. -** When that happens, the second error will be reported since these -** interfaces always report the most recent result. To avoid -** this, each thread can obtain exclusive use of the [database connection] D -** by invoking [sqlite3_mutex_enter]([sqlite3_db_mutex](D)) before beginning -** to use D and invoking [sqlite3_mutex_leave]([sqlite3_db_mutex](D)) after -** all calls to the interfaces listed here are completed. -** -** If an interface fails with SQLITE_MISUSE, that means the interface -** was invoked incorrectly by the application. In that case, the -** error code and message may or may not be set. -*/ -SQLITE_API int sqlite3_errcode(sqlite3 *db); -SQLITE_API int sqlite3_extended_errcode(sqlite3 *db); -SQLITE_API const char *sqlite3_errmsg(sqlite3*); -SQLITE_API const void *sqlite3_errmsg16(sqlite3*); - -/* -** CAPI3REF: SQL Statement Object -** KEYWORDS: {prepared statement} {prepared statements} -** -** An instance of this object represents a single SQL statement. -** This object is variously known as a "prepared statement" or a -** "compiled SQL statement" or simply as a "statement". -** -** The life of a statement object goes something like this: -** -**
    -**
  1. Create the object using [sqlite3_prepare_v2()] or a related -** function. -**
  2. Bind values to [host parameters] using the sqlite3_bind_*() -** interfaces. -**
  3. Run the SQL by calling [sqlite3_step()] one or more times. -**
  4. Reset the statement using [sqlite3_reset()] then go back -** to step 2. Do this zero or more times. -**
  5. Destroy the object using [sqlite3_finalize()]. -**
-** -** Refer to documentation on individual methods above for additional -** information. -*/ -typedef struct sqlite3_stmt sqlite3_stmt; - -/* -** CAPI3REF: Run-time Limits -** -** ^(This interface allows the size of various constructs to be limited -** on a connection by connection basis. The first parameter is the -** [database connection] whose limit is to be set or queried. The -** second parameter is one of the [limit categories] that define a -** class of constructs to be size limited. The third parameter is the -** new limit for that construct. The function returns the old limit.)^ -** -** ^If the new limit is a negative number, the limit is unchanged. -** ^(For the limit category of SQLITE_LIMIT_XYZ there is a -** [limits | hard upper bound] -** set by a compile-time C preprocessor macro named -** [limits | SQLITE_MAX_XYZ]. -** (The "_LIMIT_" in the name is changed to "_MAX_".))^ -** ^Attempts to increase a limit above its hard upper bound are -** silently truncated to the hard upper bound. -** -** Run-time limits are intended for use in applications that manage -** both their own internal database and also databases that are controlled -** by untrusted external sources. An example application might be a -** web browser that has its own databases for storing history and -** separate databases controlled by JavaScript applications downloaded -** off the Internet. The internal databases can be given the -** large, default limits. Databases managed by external sources can -** be given much smaller limits designed to prevent a denial of service -** attack. Developers might also want to use the [sqlite3_set_authorizer()] -** interface to further control untrusted SQL. The size of the database -** created by an untrusted script can be contained using the -** [max_page_count] [PRAGMA]. -** -** New run-time limit categories may be added in future releases. -*/ -SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); - -/* -** CAPI3REF: Run-Time Limit Categories -** KEYWORDS: {limit category} {*limit categories} -** -** These constants define various performance limits -** that can be lowered at run-time using [sqlite3_limit()]. -** The synopsis of the meanings of the various limits is shown below. -** Additional information is available at [limits | Limits in SQLite]. -** -**
-** ^(
SQLITE_LIMIT_LENGTH
-**
The maximum size of any string or BLOB or table row.
)^ -** -** ^(
SQLITE_LIMIT_SQL_LENGTH
-**
The maximum length of an SQL statement, in bytes.
)^ -** -** ^(
SQLITE_LIMIT_COLUMN
-**
The maximum number of columns in a table definition or in the -** result set of a [SELECT] or the maximum number of columns in an index -** or in an ORDER BY or GROUP BY clause.
)^ -** -** ^(
SQLITE_LIMIT_EXPR_DEPTH
-**
The maximum depth of the parse tree on any expression.
)^ -** -** ^(
SQLITE_LIMIT_COMPOUND_SELECT
-**
The maximum number of terms in a compound SELECT statement.
)^ -** -** ^(
SQLITE_LIMIT_VDBE_OP
-**
The maximum number of instructions in a virtual machine program -** used to implement an SQL statement.
)^ -** -** ^(
SQLITE_LIMIT_FUNCTION_ARG
-**
The maximum number of arguments on a function.
)^ -** -** ^(
SQLITE_LIMIT_ATTACHED
-**
The maximum number of [ATTACH | attached databases].)^
-** -** ^(
SQLITE_LIMIT_LIKE_PATTERN_LENGTH
-**
The maximum length of the pattern argument to the [LIKE] or -** [GLOB] operators.
)^ -** -** ^(
SQLITE_LIMIT_VARIABLE_NUMBER
-**
The maximum number of variables in an SQL statement that can -** be bound.
)^ -** -** ^(
SQLITE_LIMIT_TRIGGER_DEPTH
-**
The maximum depth of recursion for triggers.
)^ -**
-*/ -#define SQLITE_LIMIT_LENGTH 0 -#define SQLITE_LIMIT_SQL_LENGTH 1 -#define SQLITE_LIMIT_COLUMN 2 -#define SQLITE_LIMIT_EXPR_DEPTH 3 -#define SQLITE_LIMIT_COMPOUND_SELECT 4 -#define SQLITE_LIMIT_VDBE_OP 5 -#define SQLITE_LIMIT_FUNCTION_ARG 6 -#define SQLITE_LIMIT_ATTACHED 7 -#define SQLITE_LIMIT_LIKE_PATTERN_LENGTH 8 -#define SQLITE_LIMIT_VARIABLE_NUMBER 9 -#define SQLITE_LIMIT_TRIGGER_DEPTH 10 - -/* -** CAPI3REF: Compiling An SQL Statement -** KEYWORDS: {SQL statement compiler} -** -** To execute an SQL query, it must first be compiled into a byte-code -** program using one of these routines. -** -** The first argument, "db", is a [database connection] obtained from a -** prior successful call to [sqlite3_open()], [sqlite3_open_v2()] or -** [sqlite3_open16()]. The database connection must not have been closed. -** -** The second argument, "zSql", is the statement to be compiled, encoded -** as either UTF-8 or UTF-16. The sqlite3_prepare() and sqlite3_prepare_v2() -** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2() -** use UTF-16. -** -** ^If the nByte argument is less than zero, then zSql is read up to the -** first zero terminator. ^If nByte is non-negative, then it is the maximum -** number of bytes read from zSql. ^When nByte is non-negative, the -** zSql string ends at either the first '\000' or '\u0000' character or -** the nByte-th byte, whichever comes first. If the caller knows -** that the supplied string is nul-terminated, then there is a small -** performance advantage to be gained by passing an nByte parameter that -** is equal to the number of bytes in the input string including -** the nul-terminator bytes. -** -** ^If pzTail is not NULL then *pzTail is made to point to the first byte -** past the end of the first SQL statement in zSql. These routines only -** compile the first statement in zSql, so *pzTail is left pointing to -** what remains uncompiled. -** -** ^*ppStmt is left pointing to a compiled [prepared statement] that can be -** executed using [sqlite3_step()]. ^If there is an error, *ppStmt is set -** to NULL. ^If the input text contains no SQL (if the input is an empty -** string or a comment) then *ppStmt is set to NULL. -** The calling procedure is responsible for deleting the compiled -** SQL statement using [sqlite3_finalize()] after it has finished with it. -** ppStmt may not be NULL. -** -** ^On success, the sqlite3_prepare() family of routines return [SQLITE_OK]; -** otherwise an [error code] is returned. -** -** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are -** recommended for all new programs. The two older interfaces are retained -** for backwards compatibility, but their use is discouraged. -** ^In the "v2" interfaces, the prepared statement -** that is returned (the [sqlite3_stmt] object) contains a copy of the -** original SQL text. This causes the [sqlite3_step()] interface to -** behave differently in three ways: -** -**
    -**
  1. -** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it -** always used to do, [sqlite3_step()] will automatically recompile the SQL -** statement and try to run it again. ^If the schema has changed in -** a way that makes the statement no longer valid, [sqlite3_step()] will still -** return [SQLITE_SCHEMA]. But unlike the legacy behavior, [SQLITE_SCHEMA] is -** now a fatal error. Calling [sqlite3_prepare_v2()] again will not make the -** error go away. Note: use [sqlite3_errmsg()] to find the text -** of the parsing error that results in an [SQLITE_SCHEMA] return. -**
    2. -** -**
  2. -** ^When an error occurs, [sqlite3_step()] will return one of the detailed -** [error codes] or [extended error codes]. ^The legacy behavior was that -** [sqlite3_step()] would only return a generic [SQLITE_ERROR] result code -** and the application would have to make a second call to [sqlite3_reset()] -** in order to find the underlying cause of the problem. With the "v2" prepare -** interfaces, the underlying reason for the error is returned immediately. -**
    3. -** -**
  3. -** ^If the value of a [parameter | host parameter] in the WHERE clause might -** change the query plan for a statement, then the statement may be -** automatically recompiled (as if there had been a schema change) on the first -** [sqlite3_step()] call following any change to the -** [sqlite3_bind_text | bindings] of the [parameter]. -**
    4. -**
-*/ -SQLITE_API int sqlite3_prepare( - sqlite3 *db, /* Database handle */ - const char *zSql, /* SQL statement, UTF-8 encoded */ - int nByte, /* Maximum length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: Statement handle */ - const char **pzTail /* OUT: Pointer to unused portion of zSql */ -); -SQLITE_API int sqlite3_prepare_v2( - sqlite3 *db, /* Database handle */ - const char *zSql, /* SQL statement, UTF-8 encoded */ - int nByte, /* Maximum length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: Statement handle */ - const char **pzTail /* OUT: Pointer to unused portion of zSql */ -); -SQLITE_API int sqlite3_prepare16( - sqlite3 *db, /* Database handle */ - const void *zSql, /* SQL statement, UTF-16 encoded */ - int nByte, /* Maximum length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: Statement handle */ - const void **pzTail /* OUT: Pointer to unused portion of zSql */ -); -SQLITE_API int sqlite3_prepare16_v2( - sqlite3 *db, /* Database handle */ - const void *zSql, /* SQL statement, UTF-16 encoded */ - int nByte, /* Maximum length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: Statement handle */ - const void **pzTail /* OUT: Pointer to unused portion of zSql */ -); - -/* -** CAPI3REF: Retrieving Statement SQL -** -** ^This interface can be used to retrieve a saved copy of the original -** SQL text used to create a [prepared statement] if that statement was -** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()]. -*/ -SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Dynamically Typed Value Object -** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value} -** -** SQLite uses the sqlite3_value object to represent all values -** that can be stored in a database table. SQLite uses dynamic typing -** for the values it stores. ^Values stored in sqlite3_value objects -** can be integers, floating point values, strings, BLOBs, or NULL. -** -** An sqlite3_value object may be either "protected" or "unprotected". -** Some interfaces require a protected sqlite3_value. Other interfaces -** will accept either a protected or an unprotected sqlite3_value. -** Every interface that accepts sqlite3_value arguments specifies -** whether or not it requires a protected sqlite3_value. -** -** The terms "protected" and "unprotected" refer to whether or not -** a mutex is held. A internal mutex is held for a protected -** sqlite3_value object but no mutex is held for an unprotected -** sqlite3_value object. If SQLite is compiled to be single-threaded -** (with [SQLITE_THREADSAFE=0] and with [sqlite3_threadsafe()] returning 0) -** or if SQLite is run in one of reduced mutex modes -** [SQLITE_CONFIG_SINGLETHREAD] or [SQLITE_CONFIG_MULTITHREAD] -** then there is no distinction between protected and unprotected -** sqlite3_value objects and they can be used interchangeably. However, -** for maximum code portability it is recommended that applications -** still make the distinction between between protected and unprotected -** sqlite3_value objects even when not strictly required. -** -** ^The sqlite3_value objects that are passed as parameters into the -** implementation of [application-defined SQL functions] are protected. -** ^The sqlite3_value object returned by -** [sqlite3_column_value()] is unprotected. -** Unprotected sqlite3_value objects may only be used with -** [sqlite3_result_value()] and [sqlite3_bind_value()]. -** The [sqlite3_value_blob | sqlite3_value_type()] family of -** interfaces require protected sqlite3_value objects. -*/ -typedef struct Mem sqlite3_value; - -/* -** CAPI3REF: SQL Function Context Object -** -** The context in which an SQL function executes is stored in an -** sqlite3_context object. ^A pointer to an sqlite3_context object -** is always first parameter to [application-defined SQL functions]. -** The application-defined SQL function implementation will pass this -** pointer through into calls to [sqlite3_result_int | sqlite3_result()], -** [sqlite3_aggregate_context()], [sqlite3_user_data()], -** [sqlite3_context_db_handle()], [sqlite3_get_auxdata()], -** and/or [sqlite3_set_auxdata()]. -*/ -typedef struct sqlite3_context sqlite3_context; - -/* -** CAPI3REF: Binding Values To Prepared Statements -** KEYWORDS: {host parameter} {host parameters} {host parameter name} -** KEYWORDS: {SQL parameter} {SQL parameters} {parameter binding} -** -** ^(In the SQL statement text input to [sqlite3_prepare_v2()] and its variants, -** literals may be replaced by a [parameter] that matches one of following -** templates: -** -**
    -**
  • ? -**
  • ?NNN -**
  • :VVV -**
  • @VVV -**
  • $VVV -**
-** -** In the templates above, NNN represents an integer literal, -** and VVV represents an alphanumeric identifer.)^ ^The values of these -** parameters (also called "host parameter names" or "SQL parameters") -** can be set using the sqlite3_bind_*() routines defined here. -** -** ^The first argument to the sqlite3_bind_*() routines is always -** a pointer to the [sqlite3_stmt] object returned from -** [sqlite3_prepare_v2()] or its variants. -** -** ^The second argument is the index of the SQL parameter to be set. -** ^The leftmost SQL parameter has an index of 1. ^When the same named -** SQL parameter is used more than once, second and subsequent -** occurrences have the same index as the first occurrence. -** ^The index for named parameters can be looked up using the -** [sqlite3_bind_parameter_index()] API if desired. ^The index -** for "?NNN" parameters is the value of NNN. -** ^The NNN value must be between 1 and the [sqlite3_limit()] -** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999). -** -** ^The third argument is the value to bind to the parameter. -** -** ^(In those routines that have a fourth argument, its value is the -** number of bytes in the parameter. To be clear: the value is the -** number of bytes in the value, not the number of characters.)^ -** ^If the fourth parameter is negative, the length of the string is -** the number of bytes up to the first zero terminator. -** -** ^The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and -** sqlite3_bind_text16() is a destructor used to dispose of the BLOB or -** string after SQLite has finished with it. ^If the fifth argument is -** the special value [SQLITE_STATIC], then SQLite assumes that the -** information is in static, unmanaged space and does not need to be freed. -** ^If the fifth argument has the value [SQLITE_TRANSIENT], then -** SQLite makes its own private copy of the data immediately, before -** the sqlite3_bind_*() routine returns. -** -** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that -** is filled with zeroes. ^A zeroblob uses a fixed amount of memory -** (just an integer to hold its size) while it is being processed. -** Zeroblobs are intended to serve as placeholders for BLOBs whose -** content is later written using -** [sqlite3_blob_open | incremental BLOB I/O] routines. -** ^A negative value for the zeroblob results in a zero-length BLOB. -** -** ^If any of the sqlite3_bind_*() routines are called with a NULL pointer -** for the [prepared statement] or with a prepared statement for which -** [sqlite3_step()] has been called more recently than [sqlite3_reset()], -** then the call will return [SQLITE_MISUSE]. If any sqlite3_bind_() -** routine is passed a [prepared statement] that has been finalized, the -** result is undefined and probably harmful. -** -** ^Bindings are not cleared by the [sqlite3_reset()] routine. -** ^Unbound parameters are interpreted as NULL. -** -** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an -** [error code] if anything goes wrong. -** ^[SQLITE_RANGE] is returned if the parameter -** index is out of range. ^[SQLITE_NOMEM] is returned if malloc() fails. -** -** See also: [sqlite3_bind_parameter_count()], -** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()]. -*/ -SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*)); -SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double); -SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int); -SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64); -SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int); -SQLITE_API int sqlite3_bind_text(sqlite3_stmt*, int, const char*, int n, void(*)(void*)); -SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*)); -SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*); -SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n); - -/* -** CAPI3REF: Number Of SQL Parameters -** -** ^This routine can be used to find the number of [SQL parameters] -** in a [prepared statement]. SQL parameters are tokens of the -** form "?", "?NNN", ":AAA", "$AAA", or "@AAA" that serve as -** placeholders for values that are [sqlite3_bind_blob | bound] -** to the parameters at a later time. -** -** ^(This routine actually returns the index of the largest (rightmost) -** parameter. For all forms except ?NNN, this will correspond to the -** number of unique parameters. If parameters of the ?NNN form are used, -** there may be gaps in the list.)^ -** -** See also: [sqlite3_bind_blob|sqlite3_bind()], -** [sqlite3_bind_parameter_name()], and -** [sqlite3_bind_parameter_index()]. -*/ -SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*); - -/* -** CAPI3REF: Name Of A Host Parameter -** -** ^The sqlite3_bind_parameter_name(P,N) interface returns -** the name of the N-th [SQL parameter] in the [prepared statement] P. -** ^(SQL parameters of the form "?NNN" or ":AAA" or "@AAA" or "$AAA" -** have a name which is the string "?NNN" or ":AAA" or "@AAA" or "$AAA" -** respectively. -** In other words, the initial ":" or "$" or "@" or "?" -** is included as part of the name.)^ -** ^Parameters of the form "?" without a following integer have no name -** and are referred to as "nameless" or "anonymous parameters". -** -** ^The first host parameter has an index of 1, not 0. -** -** ^If the value N is out of range or if the N-th parameter is -** nameless, then NULL is returned. ^The returned string is -** always in UTF-8 encoding even if the named parameter was -** originally specified as UTF-16 in [sqlite3_prepare16()] or -** [sqlite3_prepare16_v2()]. -** -** See also: [sqlite3_bind_blob|sqlite3_bind()], -** [sqlite3_bind_parameter_count()], and -** [sqlite3_bind_parameter_index()]. -*/ -SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int); - -/* -** CAPI3REF: Index Of A Parameter With A Given Name -** -** ^Return the index of an SQL parameter given its name. ^The -** index value returned is suitable for use as the second -** parameter to [sqlite3_bind_blob|sqlite3_bind()]. ^A zero -** is returned if no matching parameter is found. ^The parameter -** name must be given in UTF-8 even if the original statement -** was prepared from UTF-16 text using [sqlite3_prepare16_v2()]. -** -** See also: [sqlite3_bind_blob|sqlite3_bind()], -** [sqlite3_bind_parameter_count()], and -** [sqlite3_bind_parameter_index()]. -*/ -SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName); - -/* -** CAPI3REF: Reset All Bindings On A Prepared Statement -** -** ^Contrary to the intuition of many, [sqlite3_reset()] does not reset -** the [sqlite3_bind_blob | bindings] on a [prepared statement]. -** ^Use this routine to reset all host parameters to NULL. -*/ -SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*); - -/* -** CAPI3REF: Number Of Columns In A Result Set -** -** ^Return the number of columns in the result set returned by the -** [prepared statement]. ^This routine returns 0 if pStmt is an SQL -** statement that does not return data (for example an [UPDATE]). -*/ -SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Column Names In A Result Set -** -** ^These routines return the name assigned to a particular column -** in the result set of a [SELECT] statement. ^The sqlite3_column_name() -** interface returns a pointer to a zero-terminated UTF-8 string -** and sqlite3_column_name16() returns a pointer to a zero-terminated -** UTF-16 string. ^The first parameter is the [prepared statement] -** that implements the [SELECT] statement. ^The second parameter is the -** column number. ^The leftmost column is number 0. -** -** ^The returned string pointer is valid until either the [prepared statement] -** is destroyed by [sqlite3_finalize()] or until the next call to -** sqlite3_column_name() or sqlite3_column_name16() on the same column. -** -** ^If sqlite3_malloc() fails during the processing of either routine -** (for example during a conversion from UTF-8 to UTF-16) then a -** NULL pointer is returned. -** -** ^The name of a result column is the value of the "AS" clause for -** that column, if there is an AS clause. If there is no AS clause -** then the name of the column is unspecified and may change from -** one release of SQLite to the next. -*/ -SQLITE_API const char *sqlite3_column_name(sqlite3_stmt*, int N); -SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt*, int N); - -/* -** CAPI3REF: Source Of Data In A Query Result -** -** ^These routines provide a means to determine the database, table, and -** table column that is the origin of a particular result column in -** [SELECT] statement. -** ^The name of the database or table or column can be returned as -** either a UTF-8 or UTF-16 string. ^The _database_ routines return -** the database name, the _table_ routines return the table name, and -** the origin_ routines return the column name. -** ^The returned string is valid until the [prepared statement] is destroyed -** using [sqlite3_finalize()] or until the same information is requested -** again in a different encoding. -** -** ^The names returned are the original un-aliased names of the -** database, table, and column. -** -** ^The first argument to these interfaces is a [prepared statement]. -** ^These functions return information about the Nth result column returned by -** the statement, where N is the second function argument. -** ^The left-most column is column 0 for these routines. -** -** ^If the Nth column returned by the statement is an expression or -** subquery and is not a column value, then all of these functions return -** NULL. ^These routine might also return NULL if a memory allocation error -** occurs. ^Otherwise, they return the name of the attached database, table, -** or column that query result column was extracted from. -** -** ^As with all other SQLite APIs, those whose names end with "16" return -** UTF-16 encoded strings and the other functions return UTF-8. -** -** ^These APIs are only available if the library was compiled with the -** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol. -** -** If two or more threads call one or more of these routines against the same -** prepared statement and column at the same time then the results are -** undefined. -** -** If two or more threads call one or more -** [sqlite3_column_database_name | column metadata interfaces] -** for the same [prepared statement] and result column -** at the same time then the results are undefined. -*/ -SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt*,int); -SQLITE_API const void *sqlite3_column_database_name16(sqlite3_stmt*,int); -SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt*,int); -SQLITE_API const void *sqlite3_column_table_name16(sqlite3_stmt*,int); -SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt*,int); -SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt*,int); - -/* -** CAPI3REF: Declared Datatype Of A Query Result -** -** ^(The first parameter is a [prepared statement]. -** If this statement is a [SELECT] statement and the Nth column of the -** returned result set of that [SELECT] is a table column (not an -** expression or subquery) then the declared type of the table -** column is returned.)^ ^If the Nth column of the result set is an -** expression or subquery, then a NULL pointer is returned. -** ^The returned string is always UTF-8 encoded. -** -** ^(For example, given the database schema: -** -** CREATE TABLE t1(c1 VARIANT); -** -** and the following statement to be compiled: -** -** SELECT c1 + 1, c1 FROM t1; -** -** this routine would return the string "VARIANT" for the second result -** column (i==1), and a NULL pointer for the first result column (i==0).)^ -** -** ^SQLite uses dynamic run-time typing. ^So just because a column -** is declared to contain a particular type does not mean that the -** data stored in that column is of the declared type. SQLite is -** strongly typed, but the typing is dynamic not static. ^Type -** is associated with individual values, not with the containers -** used to hold those values. -*/ -SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt*,int); -SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int); - -/* -** CAPI3REF: Evaluate An SQL Statement -** -** After a [prepared statement] has been prepared using either -** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy -** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this function -** must be called one or more times to evaluate the statement. -** -** The details of the behavior of the sqlite3_step() interface depend -** on whether the statement was prepared using the newer "v2" interface -** [sqlite3_prepare_v2()] and [sqlite3_prepare16_v2()] or the older legacy -** interface [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the -** new "v2" interface is recommended for new applications but the legacy -** interface will continue to be supported. -** -** ^In the legacy interface, the return value will be either [SQLITE_BUSY], -** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE]. -** ^With the "v2" interface, any of the other [result codes] or -** [extended result codes] might be returned as well. -** -** ^[SQLITE_BUSY] means that the database engine was unable to acquire the -** database locks it needs to do its job. ^If the statement is a [COMMIT] -** or occurs outside of an explicit transaction, then you can retry the -** statement. If the statement is not a [COMMIT] and occurs within a -** explicit transaction then you should rollback the transaction before -** continuing. -** -** ^[SQLITE_DONE] means that the statement has finished executing -** successfully. sqlite3_step() should not be called again on this virtual -** machine without first calling [sqlite3_reset()] to reset the virtual -** machine back to its initial state. -** -** ^If the SQL statement being executed returns any data, then [SQLITE_ROW] -** is returned each time a new row of data is ready for processing by the -** caller. The values may be accessed using the [column access functions]. -** sqlite3_step() is called again to retrieve the next row of data. -** -** ^[SQLITE_ERROR] means that a run-time error (such as a constraint -** violation) has occurred. sqlite3_step() should not be called again on -** the VM. More information may be found by calling [sqlite3_errmsg()]. -** ^With the legacy interface, a more specific error code (for example, -** [SQLITE_INTERRUPT], [SQLITE_SCHEMA], [SQLITE_CORRUPT], and so forth) -** can be obtained by calling [sqlite3_reset()] on the -** [prepared statement]. ^In the "v2" interface, -** the more specific error code is returned directly by sqlite3_step(). -** -** [SQLITE_MISUSE] means that the this routine was called inappropriately. -** Perhaps it was called on a [prepared statement] that has -** already been [sqlite3_finalize | finalized] or on one that had -** previously returned [SQLITE_ERROR] or [SQLITE_DONE]. Or it could -** be the case that the same database connection is being used by two or -** more threads at the same moment in time. -** -** Goofy Interface Alert: In the legacy interface, the sqlite3_step() -** API always returns a generic error code, [SQLITE_ERROR], following any -** error other than [SQLITE_BUSY] and [SQLITE_MISUSE]. You must call -** [sqlite3_reset()] or [sqlite3_finalize()] in order to find one of the -** specific [error codes] that better describes the error. -** We admit that this is a goofy design. The problem has been fixed -** with the "v2" interface. If you prepare all of your SQL statements -** using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] instead -** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces, -** then the more specific [error codes] are returned directly -** by sqlite3_step(). The use of the "v2" interface is recommended. -*/ -SQLITE_API int sqlite3_step(sqlite3_stmt*); - -/* -** CAPI3REF: Number of columns in a result set -** -** ^The sqlite3_data_count(P) the number of columns in the -** of the result set of [prepared statement] P. -*/ -SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Fundamental Datatypes -** KEYWORDS: SQLITE_TEXT -** -** ^(Every value in SQLite has one of five fundamental datatypes: -** -**
    -**
  • 64-bit signed integer -**
  • 64-bit IEEE floating point number -**
  • string -**
  • BLOB -**
  • NULL -**
)^ -** -** These constants are codes for each of those types. -** -** Note that the SQLITE_TEXT constant was also used in SQLite version 2 -** for a completely different meaning. Software that links against both -** SQLite version 2 and SQLite version 3 should use SQLITE3_TEXT, not -** SQLITE_TEXT. -*/ -#define SQLITE_INTEGER 1 -#define SQLITE_FLOAT 2 -#define SQLITE_BLOB 4 -#define SQLITE_NULL 5 -#ifdef SQLITE_TEXT -# undef SQLITE_TEXT -#else -# define SQLITE_TEXT 3 -#endif -#define SQLITE3_TEXT 3 - -/* -** CAPI3REF: Result Values From A Query -** KEYWORDS: {column access functions} -** -** These routines form the "result set" interface. -** -** ^These routines return information about a single column of the current -** result row of a query. ^In every case the first argument is a pointer -** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*] -** that was returned from [sqlite3_prepare_v2()] or one of its variants) -** and the second argument is the index of the column for which information -** should be returned. ^The leftmost column of the result set has the index 0. -** ^The number of columns in the result can be determined using -** [sqlite3_column_count()]. -** -** If the SQL statement does not currently point to a valid row, or if the -** column index is out of range, the result is undefined. -** These routines may only be called when the most recent call to -** [sqlite3_step()] has returned [SQLITE_ROW] and neither -** [sqlite3_reset()] nor [sqlite3_finalize()] have been called subsequently. -** If any of these routines are called after [sqlite3_reset()] or -** [sqlite3_finalize()] or after [sqlite3_step()] has returned -** something other than [SQLITE_ROW], the results are undefined. -** If [sqlite3_step()] or [sqlite3_reset()] or [sqlite3_finalize()] -** are called from a different thread while any of these routines -** are pending, then the results are undefined. -** -** ^The sqlite3_column_type() routine returns the -** [SQLITE_INTEGER | datatype code] for the initial data type -** of the result column. ^The returned value is one of [SQLITE_INTEGER], -** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL]. The value -** returned by sqlite3_column_type() is only meaningful if no type -** conversions have occurred as described below. After a type conversion, -** the value returned by sqlite3_column_type() is undefined. Future -** versions of SQLite may change the behavior of sqlite3_column_type() -** following a type conversion. -** -** ^If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes() -** routine returns the number of bytes in that BLOB or string. -** ^If the result is a UTF-16 string, then sqlite3_column_bytes() converts -** the string to UTF-8 and then returns the number of bytes. -** ^If the result is a numeric value then sqlite3_column_bytes() uses -** [sqlite3_snprintf()] to convert that value to a UTF-8 string and returns -** the number of bytes in that string. -** ^The value returned does not include the zero terminator at the end -** of the string. ^For clarity: the value returned is the number of -** bytes in the string, not the number of characters. -** -** ^Strings returned by sqlite3_column_text() and sqlite3_column_text16(), -** even empty strings, are always zero terminated. ^The return -** value from sqlite3_column_blob() for a zero-length BLOB is an arbitrary -** pointer, possibly even a NULL pointer. -** -** ^The sqlite3_column_bytes16() routine is similar to sqlite3_column_bytes() -** but leaves the result in UTF-16 in native byte order instead of UTF-8. -** ^The zero terminator is not included in this count. -** -** ^The object returned by [sqlite3_column_value()] is an -** [unprotected sqlite3_value] object. An unprotected sqlite3_value object -** may only be used with [sqlite3_bind_value()] and [sqlite3_result_value()]. -** If the [unprotected sqlite3_value] object returned by -** [sqlite3_column_value()] is used in any other way, including calls -** to routines like [sqlite3_value_int()], [sqlite3_value_text()], -** or [sqlite3_value_bytes()], then the behavior is undefined. -** -** These routines attempt to convert the value where appropriate. ^For -** example, if the internal representation is FLOAT and a text result -** is requested, [sqlite3_snprintf()] is used internally to perform the -** conversion automatically. ^(The following table details the conversions -** that are applied: -** -**
-**
-**
Internal
Type 		Requested
Type 		Conversion -** -**
NULL INTEGER Result is 0 -**
NULL FLOAT Result is 0.0 -**
NULL TEXT Result is NULL pointer -**
NULL BLOB Result is NULL pointer -**
INTEGER FLOAT Convert from integer to float -**
INTEGER TEXT ASCII rendering of the integer -**
INTEGER BLOB Same as INTEGER->TEXT -**
FLOAT INTEGER Convert from float to integer -**
FLOAT TEXT ASCII rendering of the float -**
FLOAT BLOB Same as FLOAT->TEXT -**
TEXT INTEGER Use atoi() -**
TEXT FLOAT Use atof() -**
TEXT BLOB No change -**
BLOB INTEGER Convert to TEXT then use atoi() -**
BLOB FLOAT Convert to TEXT then use atof() -**
BLOB TEXT Add a zero terminator if needed -**
-** )^ -** -** The table above makes reference to standard C library functions atoi() -** and atof(). SQLite does not really use these functions. It has its -** own equivalent internal routines. The atoi() and atof() names are -** used in the table for brevity and because they are familiar to most -** C programmers. -** -** ^Note that when type conversions occur, pointers returned by prior -** calls to sqlite3_column_blob(), sqlite3_column_text(), and/or -** sqlite3_column_text16() may be invalidated. -** ^(Type conversions and pointer invalidations might occur -** in the following cases: -** -**
    -**
  • The initial content is a BLOB and sqlite3_column_text() or -** sqlite3_column_text16() is called. A zero-terminator might -** need to be added to the string.
    • -**
  • The initial content is UTF-8 text and sqlite3_column_bytes16() or -** sqlite3_column_text16() is called. The content must be converted -** to UTF-16.
    • -**
  • The initial content is UTF-16 text and sqlite3_column_bytes() or -** sqlite3_column_text() is called. The content must be converted -** to UTF-8.
    • -**
)^ -** -** ^Conversions between UTF-16be and UTF-16le are always done in place and do -** not invalidate a prior pointer, though of course the content of the buffer -** that the prior pointer points to will have been modified. Other kinds -** of conversion are done in place when it is possible, but sometimes they -** are not possible and in those cases prior pointers are invalidated. -** -** ^(The safest and easiest to remember policy is to invoke these routines -** in one of the following ways: -** -**
    -**
  • sqlite3_column_text() followed by sqlite3_column_bytes()
    • -**
  • sqlite3_column_blob() followed by sqlite3_column_bytes()
    • -**
  • sqlite3_column_text16() followed by sqlite3_column_bytes16()
    • -**
)^ -** -** In other words, you should call sqlite3_column_text(), -** sqlite3_column_blob(), or sqlite3_column_text16() first to force the result -** into the desired format, then invoke sqlite3_column_bytes() or -** sqlite3_column_bytes16() to find the size of the result. Do not mix calls -** to sqlite3_column_text() or sqlite3_column_blob() with calls to -** sqlite3_column_bytes16(), and do not mix calls to sqlite3_column_text16() -** with calls to sqlite3_column_bytes(). -** -** ^The pointers returned are valid until a type conversion occurs as -** described above, or until [sqlite3_step()] or [sqlite3_reset()] or -** [sqlite3_finalize()] is called. ^The memory space used to hold strings -** and BLOBs is freed automatically. Do not pass the pointers returned -** [sqlite3_column_blob()], [sqlite3_column_text()], etc. into -** [sqlite3_free()]. -** -** ^(If a memory allocation error occurs during the evaluation of any -** of these routines, a default value is returned. The default value -** is either the integer 0, the floating point number 0.0, or a NULL -** pointer. Subsequent calls to [sqlite3_errcode()] will return -** [SQLITE_NOMEM].)^ -*/ -SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol); -SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_int(sqlite3_stmt*, int iCol); -SQLITE_API sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol); -SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol); -SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol); -SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol); - -/* -** CAPI3REF: Destroy A Prepared Statement Object -** -** ^The sqlite3_finalize() function is called to delete a [prepared statement]. -** ^If the statement was executed successfully or not executed at all, then -** SQLITE_OK is returned. ^If execution of the statement failed then an -** [error code] or [extended error code] is returned. -** -** ^This routine can be called at any point during the execution of the -** [prepared statement]. ^If the virtual machine has not -** completed execution when this routine is called, that is like -** encountering an error or an [sqlite3_interrupt | interrupt]. -** ^Incomplete updates may be rolled back and transactions canceled, -** depending on the circumstances, and the -** [error code] returned will be [SQLITE_ABORT]. -*/ -SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Reset A Prepared Statement Object -** -** The sqlite3_reset() function is called to reset a [prepared statement] -** object back to its initial state, ready to be re-executed. -** ^Any SQL statement variables that had values bound to them using -** the [sqlite3_bind_blob | sqlite3_bind_*() API] retain their values. -** Use [sqlite3_clear_bindings()] to reset the bindings. -** -** ^The [sqlite3_reset(S)] interface resets the [prepared statement] S -** back to the beginning of its program. -** -** ^If the most recent call to [sqlite3_step(S)] for the -** [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE], -** or if [sqlite3_step(S)] has never before been called on S, -** then [sqlite3_reset(S)] returns [SQLITE_OK]. -** -** ^If the most recent call to [sqlite3_step(S)] for the -** [prepared statement] S indicated an error, then -** [sqlite3_reset(S)] returns an appropriate [error code]. -** -** ^The [sqlite3_reset(S)] interface does not change the values -** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S. -*/ -SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Create Or Redefine SQL Functions -** KEYWORDS: {function creation routines} -** KEYWORDS: {application-defined SQL function} -** KEYWORDS: {application-defined SQL functions} -** -** ^These two functions (collectively known as "function creation routines") -** are used to add SQL functions or aggregates or to redefine the behavior -** of existing SQL functions or aggregates. The only difference between the -** two is that the second parameter, the name of the (scalar) function or -** aggregate, is encoded in UTF-8 for sqlite3_create_function() and UTF-16 -** for sqlite3_create_function16(). -** -** ^The first parameter is the [database connection] to which the SQL -** function is to be added. ^If an application uses more than one database -** connection then application-defined SQL functions must be added -** to each database connection separately. -** -** The second parameter is the name of the SQL function to be created or -** redefined. ^The length of the name is limited to 255 bytes, exclusive of -** the zero-terminator. Note that the name length limit is in bytes, not -** characters. ^Any attempt to create a function with a longer name -** will result in [SQLITE_ERROR] being returned. -** -** ^The third parameter (nArg) -** is the number of arguments that the SQL function or -** aggregate takes. ^If this parameter is -1, then the SQL function or -** aggregate may take any number of arguments between 0 and the limit -** set by [sqlite3_limit]([SQLITE_LIMIT_FUNCTION_ARG]). If the third -** parameter is less than -1 or greater than 127 then the behavior is -** undefined. -** -** The fourth parameter, eTextRep, specifies what -** [SQLITE_UTF8 | text encoding] this SQL function prefers for -** its parameters. Any SQL function implementation should be able to work -** work with UTF-8, UTF-16le, or UTF-16be. But some implementations may be -** more efficient with one encoding than another. ^An application may -** invoke sqlite3_create_function() or sqlite3_create_function16() multiple -** times with the same function but with different values of eTextRep. -** ^When multiple implementations of the same function are available, SQLite -** will pick the one that involves the least amount of data conversion. -** If there is only a single implementation which does not care what text -** encoding is used, then the fourth argument should be [SQLITE_ANY]. -** -** ^(The fifth parameter is an arbitrary pointer. The implementation of the -** function can gain access to this pointer using [sqlite3_user_data()].)^ -** -** The seventh, eighth and ninth parameters, xFunc, xStep and xFinal, are -** pointers to C-language functions that implement the SQL function or -** aggregate. ^A scalar SQL function requires an implementation of the xFunc -** callback only; NULL pointers should be passed as the xStep and xFinal -** parameters. ^An aggregate SQL function requires an implementation of xStep -** and xFinal and NULL should be passed for xFunc. ^To delete an existing -** SQL function or aggregate, pass NULL for all three function callbacks. -** -** ^It is permitted to register multiple implementations of the same -** functions with the same name but with either differing numbers of -** arguments or differing preferred text encodings. ^SQLite will use -** the implementation that most closely matches the way in which the -** SQL function is used. ^A function implementation with a non-negative -** nArg parameter is a better match than a function implementation with -** a negative nArg. ^A function where the preferred text encoding -** matches the database encoding is a better -** match than a function where the encoding is different. -** ^A function where the encoding difference is between UTF16le and UTF16be -** is a closer match than a function where the encoding difference is -** between UTF8 and UTF16. -** -** ^Built-in functions may be overloaded by new application-defined functions. -** ^The first application-defined function with a given name overrides all -** built-in functions in the same [database connection] with the same name. -** ^Subsequent application-defined functions of the same name only override -** prior application-defined functions that are an exact match for the -** number of parameters and preferred encoding. -** -** ^An application-defined function is permitted to call other -** SQLite interfaces. However, such calls must not -** close the database connection nor finalize or reset the prepared -** statement in which the function is running. -*/ -SQLITE_API int sqlite3_create_function( - sqlite3 *db, - const char *zFunctionName, - int nArg, - int eTextRep, - void *pApp, - void (*xFunc)(sqlite3_context*,int,sqlite3_value**), - void (*xStep)(sqlite3_context*,int,sqlite3_value**), - void (*xFinal)(sqlite3_context*) -); -SQLITE_API int sqlite3_create_function16( - sqlite3 *db, - const void *zFunctionName, - int nArg, - int eTextRep, - void *pApp, - void (*xFunc)(sqlite3_context*,int,sqlite3_value**), - void (*xStep)(sqlite3_context*,int,sqlite3_value**), - void (*xFinal)(sqlite3_context*) -); - -/* -** CAPI3REF: Text Encodings -** -** These constant define integer codes that represent the various -** text encodings supported by SQLite. -*/ -#define SQLITE_UTF8 1 -#define SQLITE_UTF16LE 2 -#define SQLITE_UTF16BE 3 -#define SQLITE_UTF16 4 /* Use native byte order */ -#define SQLITE_ANY 5 /* sqlite3_create_function only */ -#define SQLITE_UTF16_ALIGNED 8 /* sqlite3_create_collation only */ - -/* -** CAPI3REF: Deprecated Functions -** DEPRECATED -** -** These functions are [deprecated]. In order to maintain -** backwards compatibility with older code, these functions continue -** to be supported. However, new applications should avoid -** the use of these functions. To help encourage people to avoid -** using these functions, we are not going to tell you what they do. -*/ -#ifndef SQLITE_OMIT_DEPRECATED -SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*); -SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*); -SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*); -SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void); -SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void); -SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),void*,sqlite3_int64); -#endif - -/* -** CAPI3REF: Obtaining SQL Function Parameter Values -** -** The C-language implementation of SQL functions and aggregates uses -** this set of interface routines to access the parameter values on -** the function or aggregate. -** -** The xFunc (for scalar functions) or xStep (for aggregates) parameters -** to [sqlite3_create_function()] and [sqlite3_create_function16()] -** define callbacks that implement the SQL functions and aggregates. -** The 4th parameter to these callbacks is an array of pointers to -** [protected sqlite3_value] objects. There is one [sqlite3_value] object for -** each parameter to the SQL function. These routines are used to -** extract values from the [sqlite3_value] objects. -** -** These routines work only with [protected sqlite3_value] objects. -** Any attempt to use these routines on an [unprotected sqlite3_value] -** object results in undefined behavior. -** -** ^These routines work just like the corresponding [column access functions] -** except that these routines take a single [protected sqlite3_value] object -** pointer instead of a [sqlite3_stmt*] pointer and an integer column number. -** -** ^The sqlite3_value_text16() interface extracts a UTF-16 string -** in the native byte-order of the host machine. ^The -** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces -** extract UTF-16 strings as big-endian and little-endian respectively. -** -** ^(The sqlite3_value_numeric_type() interface attempts to apply -** numeric affinity to the value. This means that an attempt is -** made to convert the value to an integer or floating point. If -** such a conversion is possible without loss of information (in other -** words, if the value is a string that looks like a number) -** then the conversion is performed. Otherwise no conversion occurs. -** The [SQLITE_INTEGER | datatype] after conversion is returned.)^ -** -** Please pay particular attention to the fact that the pointer returned -** from [sqlite3_value_blob()], [sqlite3_value_text()], or -** [sqlite3_value_text16()] can be invalidated by a subsequent call to -** [sqlite3_value_bytes()], [sqlite3_value_bytes16()], [sqlite3_value_text()], -** or [sqlite3_value_text16()]. -** -** These routines must be called from the same thread as -** the SQL function that supplied the [sqlite3_value*] parameters. -*/ -SQLITE_API const void *sqlite3_value_blob(sqlite3_value*); -SQLITE_API int sqlite3_value_bytes(sqlite3_value*); -SQLITE_API int sqlite3_value_bytes16(sqlite3_value*); -SQLITE_API double sqlite3_value_double(sqlite3_value*); -SQLITE_API int sqlite3_value_int(sqlite3_value*); -SQLITE_API sqlite3_int64 sqlite3_value_int64(sqlite3_value*); -SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value*); -SQLITE_API const void *sqlite3_value_text16(sqlite3_value*); -SQLITE_API const void *sqlite3_value_text16le(sqlite3_value*); -SQLITE_API const void *sqlite3_value_text16be(sqlite3_value*); -SQLITE_API int sqlite3_value_type(sqlite3_value*); -SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*); - -/* -** CAPI3REF: Obtain Aggregate Function Context -** -** Implementions of aggregate SQL functions use this -** routine to allocate memory for storing their state. -** -** ^The first time the sqlite3_aggregate_context(C,N) routine is called -** for a particular aggregate function, SQLite -** allocates N of memory, zeroes out that memory, and returns a pointer -** to the new memory. ^On second and subsequent calls to -** sqlite3_aggregate_context() for the same aggregate function instance, -** the same buffer is returned. Sqlite3_aggregate_context() is normally -** called once for each invocation of the xStep callback and then one -** last time when the xFinal callback is invoked. ^(When no rows match -** an aggregate query, the xStep() callback of the aggregate function -** implementation is never called and xFinal() is called exactly once. -** In those cases, sqlite3_aggregate_context() might be called for the -** first time from within xFinal().)^ -** -** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer if N is -** less than or equal to zero or if a memory allocate error occurs. -** -** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is -** determined by the N parameter on first successful call. Changing the -** value of N in subsequent call to sqlite3_aggregate_context() within -** the same aggregate function instance will not resize the memory -** allocation.)^ -** -** ^SQLite automatically frees the memory allocated by -** sqlite3_aggregate_context() when the aggregate query concludes. -** -** The first parameter must be a copy of the -** [sqlite3_context | SQL function context] that is the first parameter -** to the xStep or xFinal callback routine that implements the aggregate -** function. -** -** This routine must be called from the same thread in which -** the aggregate SQL function is running. -*/ -SQLITE_API void *sqlite3_aggregate_context(sqlite3_context*, int nBytes); - -/* -** CAPI3REF: User Data For Functions -** -** ^The sqlite3_user_data() interface returns a copy of -** the pointer that was the pUserData parameter (the 5th parameter) -** of the [sqlite3_create_function()] -** and [sqlite3_create_function16()] routines that originally -** registered the application defined function. -** -** This routine must be called from the same thread in which -** the application-defined function is running. -*/ -SQLITE_API void *sqlite3_user_data(sqlite3_context*); - -/* -** CAPI3REF: Database Connection For Functions -** -** ^The sqlite3_context_db_handle() interface returns a copy of -** the pointer to the [database connection] (the 1st parameter) -** of the [sqlite3_create_function()] -** and [sqlite3_create_function16()] routines that originally -** registered the application defined function. -*/ -SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*); - -/* -** CAPI3REF: Function Auxiliary Data -** -** The following two functions may be used by scalar SQL functions to -** associate metadata with argument values. If the same value is passed to -** multiple invocations of the same SQL function during query execution, under -** some circumstances the associated metadata may be preserved. This may -** be used, for example, to add a regular-expression matching scalar -** function. The compiled version of the regular expression is stored as -** metadata associated with the SQL value passed as the regular expression -** pattern. The compiled regular expression can be reused on multiple -** invocations of the same function so that the original pattern string -** does not need to be recompiled on each invocation. -** -** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata -** associated by the sqlite3_set_auxdata() function with the Nth argument -** value to the application-defined function. ^If no metadata has been ever -** been set for the Nth argument of the function, or if the corresponding -** function parameter has changed since the meta-data was set, -** then sqlite3_get_auxdata() returns a NULL pointer. -** -** ^The sqlite3_set_auxdata() interface saves the metadata -** pointed to by its 3rd parameter as the metadata for the N-th -** argument of the application-defined function. Subsequent -** calls to sqlite3_get_auxdata() might return this data, if it has -** not been destroyed. -** ^If it is not NULL, SQLite will invoke the destructor -** function given by the 4th parameter to sqlite3_set_auxdata() on -** the metadata when the corresponding function parameter changes -** or when the SQL statement completes, whichever comes first. -** -** SQLite is free to call the destructor and drop metadata on any -** parameter of any function at any time. ^The only guarantee is that -** the destructor will be called before the metadata is dropped. -** -** ^(In practice, metadata is preserved between function calls for -** expressions that are constant at compile time. This includes literal -** values and [parameters].)^ -** -** These routines must be called from the same thread in which -** the SQL function is running. -*/ -SQLITE_API void *sqlite3_get_auxdata(sqlite3_context*, int N); -SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*)); - - -/* -** CAPI3REF: Constants Defining Special Destructor Behavior -** -** These are special values for the destructor that is passed in as the -** final argument to routines like [sqlite3_result_blob()]. ^If the destructor -** argument is SQLITE_STATIC, it means that the content pointer is constant -** and will never change. It does not need to be destroyed. ^The -** SQLITE_TRANSIENT value means that the content will likely change in -** the near future and that SQLite should make its own private copy of -** the content before returning. -** -** The typedef is necessary to work around problems in certain -** C++ compilers. See ticket #2191. -*/ -typedef void (*sqlite3_destructor_type)(void*); -#define SQLITE_STATIC ((sqlite3_destructor_type)0) -#define SQLITE_TRANSIENT ((sqlite3_destructor_type)-1) - -/* -** CAPI3REF: Setting The Result Of An SQL Function -** -** These routines are used by the xFunc or xFinal callbacks that -** implement SQL functions and aggregates. See -** [sqlite3_create_function()] and [sqlite3_create_function16()] -** for additional information. -** -** These functions work very much like the [parameter binding] family of -** functions used to bind values to host parameters in prepared statements. -** Refer to the [SQL parameter] documentation for additional information. -** -** ^The sqlite3_result_blob() interface sets the result from -** an application-defined function to be the BLOB whose content is pointed -** to by the second parameter and which is N bytes long where N is the -** third parameter. -** -** ^The sqlite3_result_zeroblob() interfaces set the result of -** the application-defined function to be a BLOB containing all zero -** bytes and N bytes in size, where N is the value of the 2nd parameter. -** -** ^The sqlite3_result_double() interface sets the result from -** an application-defined function to be a floating point value specified -** by its 2nd argument. -** -** ^The sqlite3_result_error() and sqlite3_result_error16() functions -** cause the implemented SQL function to throw an exception. -** ^SQLite uses the string pointed to by the -** 2nd parameter of sqlite3_result_error() or sqlite3_result_error16() -** as the text of an error message. ^SQLite interprets the error -** message string from sqlite3_result_error() as UTF-8. ^SQLite -** interprets the string from sqlite3_result_error16() as UTF-16 in native -** byte order. ^If the third parameter to sqlite3_result_error() -** or sqlite3_result_error16() is negative then SQLite takes as the error -** message all text up through the first zero character. -** ^If the third parameter to sqlite3_result_error() or -** sqlite3_result_error16() is non-negative then SQLite takes that many -** bytes (not characters) from the 2nd parameter as the error message. -** ^The sqlite3_result_error() and sqlite3_result_error16() -** routines make a private copy of the error message text before -** they return. Hence, the calling function can deallocate or -** modify the text after they return without harm. -** ^The sqlite3_result_error_code() function changes the error code -** returned by SQLite as a result of an error in a function. ^By default, -** the error code is SQLITE_ERROR. ^A subsequent call to sqlite3_result_error() -** or sqlite3_result_error16() resets the error code to SQLITE_ERROR. -** -** ^The sqlite3_result_toobig() interface causes SQLite to throw an error -** indicating that a string or BLOB is too long to represent. -** -** ^The sqlite3_result_nomem() interface causes SQLite to throw an error -** indicating that a memory allocation failed. -** -** ^The sqlite3_result_int() interface sets the return value -** of the application-defined function to be the 32-bit signed integer -** value given in the 2nd argument. -** ^The sqlite3_result_int64() interface sets the return value -** of the application-defined function to be the 64-bit signed integer -** value given in the 2nd argument. -** -** ^The sqlite3_result_null() interface sets the return value -** of the application-defined function to be NULL. -** -** ^The sqlite3_result_text(), sqlite3_result_text16(), -** sqlite3_result_text16le(), and sqlite3_result_text16be() interfaces -** set the return value of the application-defined function to be -** a text string which is represented as UTF-8, UTF-16 native byte order, -** UTF-16 little endian, or UTF-16 big endian, respectively. -** ^SQLite takes the text result from the application from -** the 2nd parameter of the sqlite3_result_text* interfaces. -** ^If the 3rd parameter to the sqlite3_result_text* interfaces -** is negative, then SQLite takes result text from the 2nd parameter -** through the first zero character. -** ^If the 3rd parameter to the sqlite3_result_text* interfaces -** is non-negative, then as many bytes (not characters) of the text -** pointed to by the 2nd parameter are taken as the application-defined -** function result. -** ^If the 4th parameter to the sqlite3_result_text* interfaces -** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that -** function as the destructor on the text or BLOB result when it has -** finished using that result. -** ^If the 4th parameter to the sqlite3_result_text* interfaces or to -** sqlite3_result_blob is the special constant SQLITE_STATIC, then SQLite -** assumes that the text or BLOB result is in constant space and does not -** copy the content of the parameter nor call a destructor on the content -** when it has finished using that result. -** ^If the 4th parameter to the sqlite3_result_text* interfaces -** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT -** then SQLite makes a copy of the result into space obtained from -** from [sqlite3_malloc()] before it returns. -** -** ^The sqlite3_result_value() interface sets the result of -** the application-defined function to be a copy the -** [unprotected sqlite3_value] object specified by the 2nd parameter. ^The -** sqlite3_result_value() interface makes a copy of the [sqlite3_value] -** so that the [sqlite3_value] specified in the parameter may change or -** be deallocated after sqlite3_result_value() returns without harm. -** ^A [protected sqlite3_value] object may always be used where an -** [unprotected sqlite3_value] object is required, so either -** kind of [sqlite3_value] object can be used with this interface. -** -** If these routines are called from within the different thread -** than the one containing the application-defined function that received -** the [sqlite3_context] pointer, the results are undefined. -*/ -SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*)); -SQLITE_API void sqlite3_result_double(sqlite3_context*, double); -SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int); -SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int); -SQLITE_API void sqlite3_result_error_toobig(sqlite3_context*); -SQLITE_API void sqlite3_result_error_nomem(sqlite3_context*); -SQLITE_API void sqlite3_result_error_code(sqlite3_context*, int); -SQLITE_API void sqlite3_result_int(sqlite3_context*, int); -SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64); -SQLITE_API void sqlite3_result_null(sqlite3_context*); -SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*)); -SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*)); -SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*)); -SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*)); -SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*); -SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n); - -/* -** CAPI3REF: Define New Collating Sequences -** -** These functions are used to add new collation sequences to the -** [database connection] specified as the first argument. -** -** ^The name of the new collation sequence is specified as a UTF-8 string -** for sqlite3_create_collation() and sqlite3_create_collation_v2() -** and a UTF-16 string for sqlite3_create_collation16(). ^In all cases -** the name is passed as the second function argument. -** -** ^The third argument may be one of the constants [SQLITE_UTF8], -** [SQLITE_UTF16LE], or [SQLITE_UTF16BE], indicating that the user-supplied -** routine expects to be passed pointers to strings encoded using UTF-8, -** UTF-16 little-endian, or UTF-16 big-endian, respectively. ^The -** third argument might also be [SQLITE_UTF16] to indicate that the routine -** expects pointers to be UTF-16 strings in the native byte order, or the -** argument can be [SQLITE_UTF16_ALIGNED] if the -** the routine expects pointers to 16-bit word aligned strings -** of UTF-16 in the native byte order. -** -** A pointer to the user supplied routine must be passed as the fifth -** argument. ^If it is NULL, this is the same as deleting the collation -** sequence (so that SQLite cannot call it anymore). -** ^Each time the application supplied function is invoked, it is passed -** as its first parameter a copy of the void* passed as the fourth argument -** to sqlite3_create_collation() or sqlite3_create_collation16(). -** -** ^The remaining arguments to the application-supplied routine are two strings, -** each represented by a (length, data) pair and encoded in the encoding -** that was passed as the third argument when the collation sequence was -** registered. The application defined collation routine should -** return negative, zero or positive if the first string is less than, -** equal to, or greater than the second string. i.e. (STRING1 - STRING2). -** -** ^The sqlite3_create_collation_v2() works like sqlite3_create_collation() -** except that it takes an extra argument which is a destructor for -** the collation. ^The destructor is called when the collation is -** destroyed and is passed a copy of the fourth parameter void* pointer -** of the sqlite3_create_collation_v2(). -** ^Collations are destroyed when they are overridden by later calls to the -** collation creation functions or when the [database connection] is closed -** using [sqlite3_close()]. -** -** See also: [sqlite3_collation_needed()] and [sqlite3_collation_needed16()]. -*/ -SQLITE_API int sqlite3_create_collation( - sqlite3*, - const char *zName, - int eTextRep, - void*, - int(*xCompare)(void*,int,const void*,int,const void*) -); -SQLITE_API int sqlite3_create_collation_v2( - sqlite3*, - const char *zName, - int eTextRep, - void*, - int(*xCompare)(void*,int,const void*,int,const void*), - void(*xDestroy)(void*) -); -SQLITE_API int sqlite3_create_collation16( - sqlite3*, - const void *zName, - int eTextRep, - void*, - int(*xCompare)(void*,int,const void*,int,const void*) -); - -/* -** CAPI3REF: Collation Needed Callbacks -** -** ^To avoid having to register all collation sequences before a database -** can be used, a single callback function may be registered with the -** [database connection] to be invoked whenever an undefined collation -** sequence is required. -** -** ^If the function is registered using the sqlite3_collation_needed() API, -** then it is passed the names of undefined collation sequences as strings -** encoded in UTF-8. ^If sqlite3_collation_needed16() is used, -** the names are passed as UTF-16 in machine native byte order. -** ^A call to either function replaces the existing collation-needed callback. -** -** ^(When the callback is invoked, the first argument passed is a copy -** of the second argument to sqlite3_collation_needed() or -** sqlite3_collation_needed16(). The second argument is the database -** connection. The third argument is one of [SQLITE_UTF8], [SQLITE_UTF16BE], -** or [SQLITE_UTF16LE], indicating the most desirable form of the collation -** sequence function required. The fourth parameter is the name of the -** required collation sequence.)^ -** -** The callback function should register the desired collation using -** [sqlite3_create_collation()], [sqlite3_create_collation16()], or -** [sqlite3_create_collation_v2()]. -*/ -SQLITE_API int sqlite3_collation_needed( - sqlite3*, - void*, - void(*)(void*,sqlite3*,int eTextRep,const char*) -); -SQLITE_API int sqlite3_collation_needed16( - sqlite3*, - void*, - void(*)(void*,sqlite3*,int eTextRep,const void*) -); - -#if SQLITE_HAS_CODEC -/* -** Specify the key for an encrypted database. This routine should be -** called right after sqlite3_open(). -** -** The code to implement this API is not available in the public release -** of SQLite. -*/ -SQLITE_API int sqlite3_key( - sqlite3 *db, /* Database to be rekeyed */ - const void *pKey, int nKey /* The key */ -); - -/* -** Change the key on an open database. If the current database is not -** encrypted, this routine will encrypt it. If pNew==0 or nNew==0, the -** database is decrypted. -** -** The code to implement this API is not available in the public release -** of SQLite. -*/ -SQLITE_API int sqlite3_rekey( - sqlite3 *db, /* Database to be rekeyed */ - const void *pKey, int nKey /* The new key */ -); - -/* -** Specify the activation key for a SEE database. Unless -** activated, none of the SEE routines will work. -*/ -SQLITE_API void sqlite3_activate_see( - const char *zPassPhrase /* Activation phrase */ -); -#endif - -#ifdef SQLITE_ENABLE_CEROD -/* -** Specify the activation key for a CEROD database. Unless -** activated, none of the CEROD routines will work. -*/ -SQLITE_API void sqlite3_activate_cerod( - const char *zPassPhrase /* Activation phrase */ -); -#endif - -/* -** CAPI3REF: Suspend Execution For A Short Time -** -** ^The sqlite3_sleep() function causes the current thread to suspend execution -** for at least a number of milliseconds specified in its parameter. -** -** ^If the operating system does not support sleep requests with -** millisecond time resolution, then the time will be rounded up to -** the nearest second. ^The number of milliseconds of sleep actually -** requested from the operating system is returned. -** -** ^SQLite implements this interface by calling the xSleep() -** method of the default [sqlite3_vfs] object. -*/ -SQLITE_API int sqlite3_sleep(int); - -/* -** CAPI3REF: Name Of The Folder Holding Temporary Files -** -** ^(If this global variable is made to point to a string which is -** the name of a folder (a.k.a. directory), then all temporary files -** created by SQLite when using a built-in [sqlite3_vfs | VFS] -** will be placed in that directory.)^ ^If this variable -** is a NULL pointer, then SQLite performs a search for an appropriate -** temporary file directory. -** -** It is not safe to read or modify this variable in more than one -** thread at a time. It is not safe to read or modify this variable -** if a [database connection] is being used at the same time in a separate -** thread. -** It is intended that this variable be set once -** as part of process initialization and before any SQLite interface -** routines have been called and that this variable remain unchanged -** thereafter. -** -** ^The [temp_store_directory pragma] may modify this variable and cause -** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore, -** the [temp_store_directory pragma] always assumes that any string -** that this variable points to is held in memory obtained from -** [sqlite3_malloc] and the pragma may attempt to free that memory -** using [sqlite3_free]. -** Hence, if this variable is modified directly, either it should be -** made NULL or made to point to memory obtained from [sqlite3_malloc] -** or else the use of the [temp_store_directory pragma] should be avoided. -*/ -SQLITE_API char *sqlite3_temp_directory; - -/* -** CAPI3REF: Test For Auto-Commit Mode -** KEYWORDS: {autocommit mode} -** -** ^The sqlite3_get_autocommit() interface returns non-zero or -** zero if the given database connection is or is not in autocommit mode, -** respectively. ^Autocommit mode is on by default. -** ^Autocommit mode is disabled by a [BEGIN] statement. -** ^Autocommit mode is re-enabled by a [COMMIT] or [ROLLBACK]. -** -** If certain kinds of errors occur on a statement within a multi-statement -** transaction (errors including [SQLITE_FULL], [SQLITE_IOERR], -** [SQLITE_NOMEM], [SQLITE_BUSY], and [SQLITE_INTERRUPT]) then the -** transaction might be rolled back automatically. The only way to -** find out whether SQLite automatically rolled back the transaction after -** an error is to use this function. -** -** If another thread changes the autocommit status of the database -** connection while this routine is running, then the return value -** is undefined. -*/ -SQLITE_API int sqlite3_get_autocommit(sqlite3*); - -/* -** CAPI3REF: Find The Database Handle Of A Prepared Statement -** -** ^The sqlite3_db_handle interface returns the [database connection] handle -** to which a [prepared statement] belongs. ^The [database connection] -** returned by sqlite3_db_handle is the same [database connection] -** that was the first argument -** to the [sqlite3_prepare_v2()] call (or its variants) that was used to -** create the statement in the first place. -*/ -SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*); - -/* -** CAPI3REF: Find the next prepared statement -** -** ^This interface returns a pointer to the next [prepared statement] after -** pStmt associated with the [database connection] pDb. ^If pStmt is NULL -** then this interface returns a pointer to the first prepared statement -** associated with the database connection pDb. ^If no prepared statement -** satisfies the conditions of this routine, it returns NULL. -** -** The [database connection] pointer D in a call to -** [sqlite3_next_stmt(D,S)] must refer to an open database -** connection and in particular must not be a NULL pointer. -*/ -SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Commit And Rollback Notification Callbacks -** -** ^The sqlite3_commit_hook() interface registers a callback -** function to be invoked whenever a transaction is [COMMIT | committed]. -** ^Any callback set by a previous call to sqlite3_commit_hook() -** for the same database connection is overridden. -** ^The sqlite3_rollback_hook() interface registers a callback -** function to be invoked whenever a transaction is [ROLLBACK | rolled back]. -** ^Any callback set by a previous call to sqlite3_rollback_hook() -** for the same database connection is overridden. -** ^The pArg argument is passed through to the callback. -** ^If the callback on a commit hook function returns non-zero, -** then the commit is converted into a rollback. -** -** ^The sqlite3_commit_hook(D,C,P) and sqlite3_rollback_hook(D,C,P) functions -** return the P argument from the previous call of the same function -** on the same [database connection] D, or NULL for -** the first call for each function on D. -** -** The callback implementation must not do anything that will modify -** the database connection that invoked the callback. Any actions -** to modify the database connection must be deferred until after the -** completion of the [sqlite3_step()] call that triggered the commit -** or rollback hook in the first place. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -** ^Registering a NULL function disables the callback. -** -** ^When the commit hook callback routine returns zero, the [COMMIT] -** operation is allowed to continue normally. ^If the commit hook -** returns non-zero, then the [COMMIT] is converted into a [ROLLBACK]. -** ^The rollback hook is invoked on a rollback that results from a commit -** hook returning non-zero, just as it would be with any other rollback. -** -** ^For the purposes of this API, a transaction is said to have been -** rolled back if an explicit "ROLLBACK" statement is executed, or -** an error or constraint causes an implicit rollback to occur. -** ^The rollback callback is not invoked if a transaction is -** automatically rolled back because the database connection is closed. -** ^The rollback callback is not invoked if a transaction is -** rolled back because a commit callback returned non-zero. -** -** See also the [sqlite3_update_hook()] interface. -*/ -SQLITE_API void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*); -SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*); - -/* -** CAPI3REF: Data Change Notification Callbacks -** -** ^The sqlite3_update_hook() interface registers a callback function -** with the [database connection] identified by the first argument -** to be invoked whenever a row is updated, inserted or deleted. -** ^Any callback set by a previous call to this function -** for the same database connection is overridden. -** -** ^The second argument is a pointer to the function to invoke when a -** row is updated, inserted or deleted. -** ^The first argument to the callback is a copy of the third argument -** to sqlite3_update_hook(). -** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE], -** or [SQLITE_UPDATE], depending on the operation that caused the callback -** to be invoked. -** ^The third and fourth arguments to the callback contain pointers to the -** database and table name containing the affected row. -** ^The final callback parameter is the [rowid] of the row. -** ^In the case of an update, this is the [rowid] after the update takes place. -** -** ^(The update hook is not invoked when internal system tables are -** modified (i.e. sqlite_master and sqlite_sequence).)^ -** -** ^In the current implementation, the update hook -** is not invoked when duplication rows are deleted because of an -** [ON CONFLICT | ON CONFLICT REPLACE] clause. ^Nor is the update hook -** invoked when rows are deleted using the [truncate optimization]. -** The exceptions defined in this paragraph might change in a future -** release of SQLite. -** -** The update hook implementation must not do anything that will modify -** the database connection that invoked the update hook. Any actions -** to modify the database connection must be deferred until after the -** completion of the [sqlite3_step()] call that triggered the update hook. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -** ^The sqlite3_update_hook(D,C,P) function -** returns the P argument from the previous call -** on the same [database connection] D, or NULL for -** the first call on D. -** -** See also the [sqlite3_commit_hook()] and [sqlite3_rollback_hook()] -** interfaces. -*/ -SQLITE_API void *sqlite3_update_hook( - sqlite3*, - void(*)(void *,int ,char const *,char const *,sqlite3_int64), - void* -); - -/* -** CAPI3REF: Enable Or Disable Shared Pager Cache -** KEYWORDS: {shared cache} -** -** ^(This routine enables or disables the sharing of the database cache -** and schema data structures between [database connection | connections] -** to the same database. Sharing is enabled if the argument is true -** and disabled if the argument is false.)^ -** -** ^Cache sharing is enabled and disabled for an entire process. -** This is a change as of SQLite version 3.5.0. In prior versions of SQLite, -** sharing was enabled or disabled for each thread separately. -** -** ^(The cache sharing mode set by this interface effects all subsequent -** calls to [sqlite3_open()], [sqlite3_open_v2()], and [sqlite3_open16()]. -** Existing database connections continue use the sharing mode -** that was in effect at the time they were opened.)^ -** -** ^(This routine returns [SQLITE_OK] if shared cache was enabled or disabled -** successfully. An [error code] is returned otherwise.)^ -** -** ^Shared cache is disabled by default. But this might change in -** future releases of SQLite. Applications that care about shared -** cache setting should set it explicitly. -** -** See Also: [SQLite Shared-Cache Mode] -*/ -SQLITE_API int sqlite3_enable_shared_cache(int); - -/* -** CAPI3REF: Attempt To Free Heap Memory -** -** ^The sqlite3_release_memory() interface attempts to free N bytes -** of heap memory by deallocating non-essential memory allocations -** held by the database library. Memory used to cache database -** pages to improve performance is an example of non-essential memory. -** ^sqlite3_release_memory() returns the number of bytes actually freed, -** which might be more or less than the amount requested. -*/ -SQLITE_API int sqlite3_release_memory(int); - -/* -** CAPI3REF: Impose A Limit On Heap Size -** -** ^The sqlite3_soft_heap_limit() interface places a "soft" limit -** on the amount of heap memory that may be allocated by SQLite. -** ^If an internal allocation is requested that would exceed the -** soft heap limit, [sqlite3_release_memory()] is invoked one or -** more times to free up some space before the allocation is performed. -** -** ^The limit is called "soft" because if [sqlite3_release_memory()] -** cannot free sufficient memory to prevent the limit from being exceeded, -** the memory is allocated anyway and the current operation proceeds. -** -** ^A negative or zero value for N means that there is no soft heap limit and -** [sqlite3_release_memory()] will only be called when memory is exhausted. -** ^The default value for the soft heap limit is zero. -** -** ^(SQLite makes a best effort to honor the soft heap limit. -** But if the soft heap limit cannot be honored, execution will -** continue without error or notification.)^ This is why the limit is -** called a "soft" limit. It is advisory only. -** -** Prior to SQLite version 3.5.0, this routine only constrained the memory -** allocated by a single thread - the same thread in which this routine -** runs. Beginning with SQLite version 3.5.0, the soft heap limit is -** applied to all threads. The value specified for the soft heap limit -** is an upper bound on the total memory allocation for all threads. In -** version 3.5.0 there is no mechanism for limiting the heap usage for -** individual threads. -*/ -SQLITE_API void sqlite3_soft_heap_limit(int); - -/* -** CAPI3REF: Extract Metadata About A Column Of A Table -** -** ^This routine returns metadata about a specific column of a specific -** database table accessible using the [database connection] handle -** passed as the first function argument. -** -** ^The column is identified by the second, third and fourth parameters to -** this function. ^The second parameter is either the name of the database -** (i.e. "main", "temp", or an attached database) containing the specified -** table or NULL. ^If it is NULL, then all attached databases are searched -** for the table using the same algorithm used by the database engine to -** resolve unqualified table references. -** -** ^The third and fourth parameters to this function are the table and column -** name of the desired column, respectively. Neither of these parameters -** may be NULL. -** -** ^Metadata is returned by writing to the memory locations passed as the 5th -** and subsequent parameters to this function. ^Any of these arguments may be -** NULL, in which case the corresponding element of metadata is omitted. -** -** ^(
-** -**
Parameter Output
Type 		Description -** -**
5th const char* Data type -**
6th const char* Name of default collation sequence -**
7th int True if column has a NOT NULL constraint -**
8th int True if column is part of the PRIMARY KEY -**
9th int True if column is [AUTOINCREMENT] -**
-**
)^ -** -** ^The memory pointed to by the character pointers returned for the -** declaration type and collation sequence is valid only until the next -** call to any SQLite API function. -** -** ^If the specified table is actually a view, an [error code] is returned. -** -** ^If the specified column is "rowid", "oid" or "_rowid_" and an -** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output -** parameters are set for the explicitly declared column. ^(If there is no -** explicitly declared [INTEGER PRIMARY KEY] column, then the output -** parameters are set as follows: -** -** 
-**     data type: "INTEGER"
-**     collation sequence: "BINARY"
-**     not null: 0
-**     primary key: 1
-**     auto increment: 0
-**
)^ -** -** ^(This function may load one or more schemas from database files. If an -** error occurs during this process, or if the requested table or column -** cannot be found, an [error code] is returned and an error message left -** in the [database connection] (to be retrieved using sqlite3_errmsg()).)^ -** -** ^This API is only available if the library was compiled with the -** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol defined. -*/ -SQLITE_API int sqlite3_table_column_metadata( - sqlite3 *db, /* Connection handle */ - const char *zDbName, /* Database name or NULL */ - const char *zTableName, /* Table name */ - const char *zColumnName, /* Column name */ - char const **pzDataType, /* OUTPUT: Declared data type */ - char const **pzCollSeq, /* OUTPUT: Collation sequence name */ - int *pNotNull, /* OUTPUT: True if NOT NULL constraint exists */ - int *pPrimaryKey, /* OUTPUT: True if column part of PK */ - int *pAutoinc /* OUTPUT: True if column is auto-increment */ -); - -/* -** CAPI3REF: Load An Extension -** -** ^This interface loads an SQLite extension library from the named file. -** -** ^The sqlite3_load_extension() interface attempts to load an -** SQLite extension library contained in the file zFile. -** -** ^The entry point is zProc. -** ^zProc may be 0, in which case the name of the entry point -** defaults to "sqlite3_extension_init". -** ^The sqlite3_load_extension() interface returns -** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong. -** ^If an error occurs and pzErrMsg is not 0, then the -** [sqlite3_load_extension()] interface shall attempt to -** fill *pzErrMsg with error message text stored in memory -** obtained from [sqlite3_malloc()]. The calling function -** should free this memory by calling [sqlite3_free()]. -** -** ^Extension loading must be enabled using -** [sqlite3_enable_load_extension()] prior to calling this API, -** otherwise an error will be returned. -** -** See also the [load_extension() SQL function]. -*/ -SQLITE_API int sqlite3_load_extension( - sqlite3 *db, /* Load the extension into this database connection */ - const char *zFile, /* Name of the shared library containing extension */ - const char *zProc, /* Entry point. Derived from zFile if 0 */ - char **pzErrMsg /* Put error message here if not 0 */ -); - -/* -** CAPI3REF: Enable Or Disable Extension Loading -** -** ^So as not to open security holes in older applications that are -** unprepared to deal with extension loading, and as a means of disabling -** extension loading while evaluating user-entered SQL, the following API -** is provided to turn the [sqlite3_load_extension()] mechanism on and off. -** -** ^Extension loading is off by default. See ticket #1863. -** ^Call the sqlite3_enable_load_extension() routine with onoff==1 -** to turn extension loading on and call it with onoff==0 to turn -** it back off again. -*/ -SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff); - -/* -** CAPI3REF: Automatically Load An Extensions -** -** ^This API can be invoked at program startup in order to register -** one or more statically linked extensions that will be available -** to all new [database connections]. -** -** ^(This routine stores a pointer to the extension entry point -** in an array that is obtained from [sqlite3_malloc()]. That memory -** is deallocated by [sqlite3_reset_auto_extension()].)^ -** -** ^This function registers an extension entry point that is -** automatically invoked whenever a new [database connection] -** is opened using [sqlite3_open()], [sqlite3_open16()], -** or [sqlite3_open_v2()]. -** ^Duplicate extensions are detected so calling this routine -** multiple times with the same extension is harmless. -** ^Automatic extensions apply across all threads. -*/ -SQLITE_API int sqlite3_auto_extension(void (*xEntryPoint)(void)); - -/* -** CAPI3REF: Reset Automatic Extension Loading -** -** ^(This function disables all previously registered automatic -** extensions. It undoes the effect of all prior -** [sqlite3_auto_extension()] calls.)^ -** -** ^This function disables automatic extensions in all threads. -*/ -SQLITE_API void sqlite3_reset_auto_extension(void); - -/* -****** EXPERIMENTAL - subject to change without notice ************** -** -** The interface to the virtual-table mechanism is currently considered -** to be experimental. The interface might change in incompatible ways. -** If this is a problem for you, do not use the interface at this time. -** -** When the virtual-table mechanism stabilizes, we will declare the -** interface fixed, support it indefinitely, and remove this comment. -*/ - -/* -** Structures used by the virtual table interface -*/ -typedef struct sqlite3_vtab sqlite3_vtab; -typedef struct sqlite3_index_info sqlite3_index_info; -typedef struct sqlite3_vtab_cursor sqlite3_vtab_cursor; -typedef struct sqlite3_module sqlite3_module; - -/* -** CAPI3REF: Virtual Table Object -** KEYWORDS: sqlite3_module {virtual table module} -** EXPERIMENTAL -** -** This structure, sometimes called a a "virtual table module", -** defines the implementation of a [virtual tables]. -** This structure consists mostly of methods for the module. -** -** ^A virtual table module is created by filling in a persistent -** instance of this structure and passing a pointer to that instance -** to [sqlite3_create_module()] or [sqlite3_create_module_v2()]. -** ^The registration remains valid until it is replaced by a different -** module or until the [database connection] closes. The content -** of this structure must not change while it is registered with -** any database connection. -*/ -struct sqlite3_module { - int iVersion; - int (*xCreate)(sqlite3*, void *pAux, - int argc, const char *const*argv, - sqlite3_vtab **ppVTab, char**); - int (*xConnect)(sqlite3*, void *pAux, - int argc, const char *const*argv, - sqlite3_vtab **ppVTab, char**); - int (*xBestIndex)(sqlite3_vtab *pVTab, sqlite3_index_info*); - int (*xDisconnect)(sqlite3_vtab *pVTab); - int (*xDestroy)(sqlite3_vtab *pVTab); - int (*xOpen)(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor); - int (*xClose)(sqlite3_vtab_cursor*); - int (*xFilter)(sqlite3_vtab_cursor*, int idxNum, const char *idxStr, - int argc, sqlite3_value **argv); - int (*xNext)(sqlite3_vtab_cursor*); - int (*xEof)(sqlite3_vtab_cursor*); - int (*xColumn)(sqlite3_vtab_cursor*, sqlite3_context*, int); - int (*xRowid)(sqlite3_vtab_cursor*, sqlite3_int64 *pRowid); - int (*xUpdate)(sqlite3_vtab *, int, sqlite3_value **, sqlite3_int64 *); - int (*xBegin)(sqlite3_vtab *pVTab); - int (*xSync)(sqlite3_vtab *pVTab); - int (*xCommit)(sqlite3_vtab *pVTab); - int (*xRollback)(sqlite3_vtab *pVTab); - int (*xFindFunction)(sqlite3_vtab *pVtab, int nArg, const char *zName, - void (**pxFunc)(sqlite3_context*,int,sqlite3_value**), - void **ppArg); - int (*xRename)(sqlite3_vtab *pVtab, const char *zNew); -}; - -/* -** CAPI3REF: Virtual Table Indexing Information -** KEYWORDS: sqlite3_index_info -** EXPERIMENTAL -** -** The sqlite3_index_info structure and its substructures is used to -** pass information into and receive the reply from the [xBestIndex] -** method of a [virtual table module]. The fields under **Inputs** are the -** inputs to xBestIndex and are read-only. xBestIndex inserts its -** results into the **Outputs** fields. -** -** ^(The aConstraint[] array records WHERE clause constraints of the form: -** -** 
column OP expr
-** -** where OP is =, <, <=, >, or >=.)^ ^(The particular operator is -** stored in aConstraint[].op.)^ ^(The index of the column is stored in -** aConstraint[].iColumn.)^ ^(aConstraint[].usable is TRUE if the -** expr on the right-hand side can be evaluated (and thus the constraint -** is usable) and false if it cannot.)^ -** -** ^The optimizer automatically inverts terms of the form "expr OP column" -** and makes other simplifications to the WHERE clause in an attempt to -** get as many WHERE clause terms into the form shown above as possible. -** ^The aConstraint[] array only reports WHERE clause terms that are -** relevant to the particular virtual table being queried. -** -** ^Information about the ORDER BY clause is stored in aOrderBy[]. -** ^Each term of aOrderBy records a column of the ORDER BY clause. -** -** The [xBestIndex] method must fill aConstraintUsage[] with information -** about what parameters to pass to xFilter. ^If argvIndex>0 then -** the right-hand side of the corresponding aConstraint[] is evaluated -** and becomes the argvIndex-th entry in argv. ^(If aConstraintUsage[].omit -** is true, then the constraint is assumed to be fully handled by the -** virtual table and is not checked again by SQLite.)^ -** -** ^The idxNum and idxPtr values are recorded and passed into the -** [xFilter] method. -** ^[sqlite3_free()] is used to free idxPtr if and only if -** needToFreeIdxPtr is true. -** -** ^The orderByConsumed means that output from [xFilter]/[xNext] will occur in -** the correct order to satisfy the ORDER BY clause so that no separate -** sorting step is required. -** -** ^The estimatedCost value is an estimate of the cost of doing the -** particular lookup. A full scan of a table with N entries should have -** a cost of N. A binary search of a table of N entries should have a -** cost of approximately log(N). -*/ -struct sqlite3_index_info { - /* Inputs */ - int nConstraint; /* Number of entries in aConstraint */ - struct sqlite3_index_constraint { - int iColumn; /* Column on left-hand side of constraint */ - unsigned char op; /* Constraint operator */ - unsigned char usable; /* True if this constraint is usable */ - int iTermOffset; /* Used internally - xBestIndex should ignore */ - } *aConstraint; /* Table of WHERE clause constraints */ - int nOrderBy; /* Number of terms in the ORDER BY clause */ - struct sqlite3_index_orderby { - int iColumn; /* Column number */ - unsigned char desc; /* True for DESC. False for ASC. */ - } *aOrderBy; /* The ORDER BY clause */ - /* Outputs */ - struct sqlite3_index_constraint_usage { - int argvIndex; /* if >0, constraint is part of argv to xFilter */ - unsigned char omit; /* Do not code a test for this constraint */ - } *aConstraintUsage; - int idxNum; /* Number used to identify the index */ - char *idxStr; /* String, possibly obtained from sqlite3_malloc */ - int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */ - int orderByConsumed; /* True if output is already ordered */ - double estimatedCost; /* Estimated cost of using this index */ -}; -#define SQLITE_INDEX_CONSTRAINT_EQ 2 -#define SQLITE_INDEX_CONSTRAINT_GT 4 -#define SQLITE_INDEX_CONSTRAINT_LE 8 -#define SQLITE_INDEX_CONSTRAINT_LT 16 -#define SQLITE_INDEX_CONSTRAINT_GE 32 -#define SQLITE_INDEX_CONSTRAINT_MATCH 64 - -/* -** CAPI3REF: Register A Virtual Table Implementation -** EXPERIMENTAL -** -** ^These routines are used to register a new [virtual table module] name. -** ^Module names must be registered before -** creating a new [virtual table] using the module and before using a -** preexisting [virtual table] for the module. -** -** ^The module name is registered on the [database connection] specified -** by the first parameter. ^The name of the module is given by the -** second parameter. ^The third parameter is a pointer to -** the implementation of the [virtual table module]. ^The fourth -** parameter is an arbitrary client data pointer that is passed through -** into the [xCreate] and [xConnect] methods of the virtual table module -** when a new virtual table is be being created or reinitialized. -** -** ^The sqlite3_create_module_v2() interface has a fifth parameter which -** is a pointer to a destructor for the pClientData. ^SQLite will -** invoke the destructor function (if it is not NULL) when SQLite -** no longer needs the pClientData pointer. ^The sqlite3_create_module() -** interface is equivalent to sqlite3_create_module_v2() with a NULL -** destructor. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_create_module( - sqlite3 *db, /* SQLite connection to register module with */ - const char *zName, /* Name of the module */ - const sqlite3_module *p, /* Methods for the module */ - void *pClientData /* Client data for xCreate/xConnect */ -); -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_create_module_v2( - sqlite3 *db, /* SQLite connection to register module with */ - const char *zName, /* Name of the module */ - const sqlite3_module *p, /* Methods for the module */ - void *pClientData, /* Client data for xCreate/xConnect */ - void(*xDestroy)(void*) /* Module destructor function */ -); - -/* -** CAPI3REF: Virtual Table Instance Object -** KEYWORDS: sqlite3_vtab -** EXPERIMENTAL -** -** Every [virtual table module] implementation uses a subclass -** of this object to describe a particular instance -** of the [virtual table]. Each subclass will -** be tailored to the specific needs of the module implementation. -** The purpose of this superclass is to define certain fields that are -** common to all module implementations. -** -** ^Virtual tables methods can set an error message by assigning a -** string obtained from [sqlite3_mprintf()] to zErrMsg. The method should -** take care that any prior string is freed by a call to [sqlite3_free()] -** prior to assigning a new string to zErrMsg. ^After the error message -** is delivered up to the client application, the string will be automatically -** freed by sqlite3_free() and the zErrMsg field will be zeroed. -*/ -struct sqlite3_vtab { - const sqlite3_module *pModule; /* The module for this virtual table */ - int nRef; /* NO LONGER USED */ - char *zErrMsg; /* Error message from sqlite3_mprintf() */ - /* Virtual table implementations will typically add additional fields */ -}; - -/* -** CAPI3REF: Virtual Table Cursor Object -** KEYWORDS: sqlite3_vtab_cursor {virtual table cursor} -** EXPERIMENTAL -** -** Every [virtual table module] implementation uses a subclass of the -** following structure to describe cursors that point into the -** [virtual table] and are used -** to loop through the virtual table. Cursors are created using the -** [sqlite3_module.xOpen | xOpen] method of the module and are destroyed -** by the [sqlite3_module.xClose | xClose] method. Cursors are used -** by the [xFilter], [xNext], [xEof], [xColumn], and [xRowid] methods -** of the module. Each module implementation will define -** the content of a cursor structure to suit its own needs. -** -** This superclass exists in order to define fields of the cursor that -** are common to all implementations. -*/ -struct sqlite3_vtab_cursor { - sqlite3_vtab *pVtab; /* Virtual table of this cursor */ - /* Virtual table implementations will typically add additional fields */ -}; - -/* -** CAPI3REF: Declare The Schema Of A Virtual Table -** EXPERIMENTAL -** -** ^The [xCreate] and [xConnect] methods of a -** [virtual table module] call this interface -** to declare the format (the names and datatypes of the columns) of -** the virtual tables they implement. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_declare_vtab(sqlite3*, const char *zSQL); - -/* -** CAPI3REF: Overload A Function For A Virtual Table -** EXPERIMENTAL -** -** ^(Virtual tables can provide alternative implementations of functions -** using the [xFindFunction] method of the [virtual table module]. -** But global versions of those functions -** must exist in order to be overloaded.)^ -** -** ^(This API makes sure a global version of a function with a particular -** name and number of parameters exists. If no such function exists -** before this API is called, a new function is created.)^ ^The implementation -** of the new function always causes an exception to be thrown. So -** the new function is not good for anything by itself. Its only -** purpose is to be a placeholder function that can be overloaded -** by a [virtual table]. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg); - -/* -** The interface to the virtual-table mechanism defined above (back up -** to a comment remarkably similar to this one) is currently considered -** to be experimental. The interface might change in incompatible ways. -** If this is a problem for you, do not use the interface at this time. -** -** When the virtual-table mechanism stabilizes, we will declare the -** interface fixed, support it indefinitely, and remove this comment. -** -****** EXPERIMENTAL - subject to change without notice ************** -*/ - -/* -** CAPI3REF: A Handle To An Open BLOB -** KEYWORDS: {BLOB handle} {BLOB handles} -** -** An instance of this object represents an open BLOB on which -** [sqlite3_blob_open | incremental BLOB I/O] can be performed. -** ^Objects of this type are created by [sqlite3_blob_open()] -** and destroyed by [sqlite3_blob_close()]. -** ^The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces -** can be used to read or write small subsections of the BLOB. -** ^The [sqlite3_blob_bytes()] interface returns the size of the BLOB in bytes. -*/ -typedef struct sqlite3_blob sqlite3_blob; - -/* -** CAPI3REF: Open A BLOB For Incremental I/O -** -** ^(This interfaces opens a [BLOB handle | handle] to the BLOB located -** in row iRow, column zColumn, table zTable in database zDb; -** in other words, the same BLOB that would be selected by: -** -** 
-**     SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow;
-**
)^ -** -** ^If the flags parameter is non-zero, then the BLOB is opened for read -** and write access. ^If it is zero, the BLOB is opened for read access. -** ^It is not possible to open a column that is part of an index or primary -** key for writing. ^If [foreign key constraints] are enabled, it is -** not possible to open a column that is part of a [child key] for writing. -** -** ^Note that the database name is not the filename that contains -** the database but rather the symbolic name of the database that -** appears after the AS keyword when the database is connected using [ATTACH]. -** ^For the main database file, the database name is "main". -** ^For TEMP tables, the database name is "temp". -** -** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is written -** to *ppBlob. Otherwise an [error code] is returned and *ppBlob is set -** to be a null pointer.)^ -** ^This function sets the [database connection] error code and message -** accessible via [sqlite3_errcode()] and [sqlite3_errmsg()] and related -** functions. ^Note that the *ppBlob variable is always initialized in a -** way that makes it safe to invoke [sqlite3_blob_close()] on *ppBlob -** regardless of the success or failure of this routine. -** -** ^(If the row that a BLOB handle points to is modified by an -** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects -** then the BLOB handle is marked as "expired". -** This is true if any column of the row is changed, even a column -** other than the one the BLOB handle is open on.)^ -** ^Calls to [sqlite3_blob_read()] and [sqlite3_blob_write()] for -** a expired BLOB handle fail with an return code of [SQLITE_ABORT]. -** ^(Changes written into a BLOB prior to the BLOB expiring are not -** rolled back by the expiration of the BLOB. Such changes will eventually -** commit if the transaction continues to completion.)^ -** -** ^Use the [sqlite3_blob_bytes()] interface to determine the size of -** the opened blob. ^The size of a blob may not be changed by this -** interface. Use the [UPDATE] SQL command to change the size of a -** blob. -** -** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces -** and the built-in [zeroblob] SQL function can be used, if desired, -** to create an empty, zero-filled blob in which to read or write using -** this interface. -** -** To avoid a resource leak, every open [BLOB handle] should eventually -** be released by a call to [sqlite3_blob_close()]. -*/ -SQLITE_API int sqlite3_blob_open( - sqlite3*, - const char *zDb, - const char *zTable, - const char *zColumn, - sqlite3_int64 iRow, - int flags, - sqlite3_blob **ppBlob -); - -/* -** CAPI3REF: Close A BLOB Handle -** -** ^Closes an open [BLOB handle]. -** -** ^Closing a BLOB shall cause the current transaction to commit -** if there are no other BLOBs, no pending prepared statements, and the -** database connection is in [autocommit mode]. -** ^If any writes were made to the BLOB, they might be held in cache -** until the close operation if they will fit. -** -** ^(Closing the BLOB often forces the changes -** out to disk and so if any I/O errors occur, they will likely occur -** at the time when the BLOB is closed. Any errors that occur during -** closing are reported as a non-zero return value.)^ -** -** ^(The BLOB is closed unconditionally. Even if this routine returns -** an error code, the BLOB is still closed.)^ -** -** ^Calling this routine with a null pointer (such as would be returned -** by a failed call to [sqlite3_blob_open()]) is a harmless no-op. -*/ -SQLITE_API int sqlite3_blob_close(sqlite3_blob *); - -/* -** CAPI3REF: Return The Size Of An Open BLOB -** -** ^Returns the size in bytes of the BLOB accessible via the -** successfully opened [BLOB handle] in its only argument. ^The -** incremental blob I/O routines can only read or overwriting existing -** blob content; they cannot change the size of a blob. -** -** This routine only works on a [BLOB handle] which has been created -** by a prior successful call to [sqlite3_blob_open()] and which has not -** been closed by [sqlite3_blob_close()]. Passing any other pointer in -** to this routine results in undefined and probably undesirable behavior. -*/ -SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *); - -/* -** CAPI3REF: Read Data From A BLOB Incrementally -** -** ^(This function is used to read data from an open [BLOB handle] into a -** caller-supplied buffer. N bytes of data are copied into buffer Z -** from the open BLOB, starting at offset iOffset.)^ -** -** ^If offset iOffset is less than N bytes from the end of the BLOB, -** [SQLITE_ERROR] is returned and no data is read. ^If N or iOffset is -** less than zero, [SQLITE_ERROR] is returned and no data is read. -** ^The size of the blob (and hence the maximum value of N+iOffset) -** can be determined using the [sqlite3_blob_bytes()] interface. -** -** ^An attempt to read from an expired [BLOB handle] fails with an -** error code of [SQLITE_ABORT]. -** -** ^(On success, sqlite3_blob_read() returns SQLITE_OK. -** Otherwise, an [error code] or an [extended error code] is returned.)^ -** -** This routine only works on a [BLOB handle] which has been created -** by a prior successful call to [sqlite3_blob_open()] and which has not -** been closed by [sqlite3_blob_close()]. Passing any other pointer in -** to this routine results in undefined and probably undesirable behavior. -** -** See also: [sqlite3_blob_write()]. -*/ -SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset); - -/* -** CAPI3REF: Write Data Into A BLOB Incrementally -** -** ^This function is used to write data into an open [BLOB handle] from a -** caller-supplied buffer. ^N bytes of data are copied from the buffer Z -** into the open BLOB, starting at offset iOffset. -** -** ^If the [BLOB handle] passed as the first argument was not opened for -** writing (the flags parameter to [sqlite3_blob_open()] was zero), -** this function returns [SQLITE_READONLY]. -** -** ^This function may only modify the contents of the BLOB; it is -** not possible to increase the size of a BLOB using this API. -** ^If offset iOffset is less than N bytes from the end of the BLOB, -** [SQLITE_ERROR] is returned and no data is written. ^If N is -** less than zero [SQLITE_ERROR] is returned and no data is written. -** The size of the BLOB (and hence the maximum value of N+iOffset) -** can be determined using the [sqlite3_blob_bytes()] interface. -** -** ^An attempt to write to an expired [BLOB handle] fails with an -** error code of [SQLITE_ABORT]. ^Writes to the BLOB that occurred -** before the [BLOB handle] expired are not rolled back by the -** expiration of the handle, though of course those changes might -** have been overwritten by the statement that expired the BLOB handle -** or by other independent statements. -** -** ^(On success, sqlite3_blob_write() returns SQLITE_OK. -** Otherwise, an [error code] or an [extended error code] is returned.)^ -** -** This routine only works on a [BLOB handle] which has been created -** by a prior successful call to [sqlite3_blob_open()] and which has not -** been closed by [sqlite3_blob_close()]. Passing any other pointer in -** to this routine results in undefined and probably undesirable behavior. -** -** See also: [sqlite3_blob_read()]. -*/ -SQLITE_API int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset); - -/* -** CAPI3REF: Virtual File System Objects -** -** A virtual filesystem (VFS) is an [sqlite3_vfs] object -** that SQLite uses to interact -** with the underlying operating system. Most SQLite builds come with a -** single default VFS that is appropriate for the host computer. -** New VFSes can be registered and existing VFSes can be unregistered. -** The following interfaces are provided. -** -** ^The sqlite3_vfs_find() interface returns a pointer to a VFS given its name. -** ^Names are case sensitive. -** ^Names are zero-terminated UTF-8 strings. -** ^If there is no match, a NULL pointer is returned. -** ^If zVfsName is NULL then the default VFS is returned. -** -** ^New VFSes are registered with sqlite3_vfs_register(). -** ^Each new VFS becomes the default VFS if the makeDflt flag is set. -** ^The same VFS can be registered multiple times without injury. -** ^To make an existing VFS into the default VFS, register it again -** with the makeDflt flag set. If two different VFSes with the -** same name are registered, the behavior is undefined. If a -** VFS is registered with a name that is NULL or an empty string, -** then the behavior is undefined. -** -** ^Unregister a VFS with the sqlite3_vfs_unregister() interface. -** ^(If the default VFS is unregistered, another VFS is chosen as -** the default. The choice for the new VFS is arbitrary.)^ -*/ -SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName); -SQLITE_API int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt); -SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*); - -/* -** CAPI3REF: Mutexes -** -** The SQLite core uses these routines for thread -** synchronization. Though they are intended for internal -** use by SQLite, code that links against SQLite is -** permitted to use any of these routines. -** -** The SQLite source code contains multiple implementations -** of these mutex routines. An appropriate implementation -** is selected automatically at compile-time. ^(The following -** implementations are available in the SQLite core: -** -**
    -**
  • SQLITE_MUTEX_OS2 -**
  • SQLITE_MUTEX_PTHREAD -**
  • SQLITE_MUTEX_W32 -**
  • SQLITE_MUTEX_NOOP -**
)^ -** -** ^The SQLITE_MUTEX_NOOP implementation is a set of routines -** that does no real locking and is appropriate for use in -** a single-threaded application. ^The SQLITE_MUTEX_OS2, -** SQLITE_MUTEX_PTHREAD, and SQLITE_MUTEX_W32 implementations -** are appropriate for use on OS/2, Unix, and Windows. -** -** ^(If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor -** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex -** implementation is included with the library. In this case the -** application must supply a custom mutex implementation using the -** [SQLITE_CONFIG_MUTEX] option of the sqlite3_config() function -** before calling sqlite3_initialize() or any other public sqlite3_ -** function that calls sqlite3_initialize().)^ -** -** ^The sqlite3_mutex_alloc() routine allocates a new -** mutex and returns a pointer to it. ^If it returns NULL -** that means that a mutex could not be allocated. ^SQLite -** will unwind its stack and return an error. ^(The argument -** to sqlite3_mutex_alloc() is one of these integer constants: -** -**
    -**
  • SQLITE_MUTEX_FAST -**
  • SQLITE_MUTEX_RECURSIVE -**
  • SQLITE_MUTEX_STATIC_MASTER -**
  • SQLITE_MUTEX_STATIC_MEM -**
  • SQLITE_MUTEX_STATIC_MEM2 -**
  • SQLITE_MUTEX_STATIC_PRNG -**
  • SQLITE_MUTEX_STATIC_LRU -**
  • SQLITE_MUTEX_STATIC_LRU2 -**
)^ -** -** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) -** cause sqlite3_mutex_alloc() to create -** a new mutex. ^The new mutex is recursive when SQLITE_MUTEX_RECURSIVE -** is used but not necessarily so when SQLITE_MUTEX_FAST is used. -** The mutex implementation does not need to make a distinction -** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does -** not want to. ^SQLite will only request a recursive mutex in -** cases where it really needs one. ^If a faster non-recursive mutex -** implementation is available on the host platform, the mutex subsystem -** might return such a mutex in response to SQLITE_MUTEX_FAST. -** -** ^The other allowed parameters to sqlite3_mutex_alloc() (anything other -** than SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) each return -** a pointer to a static preexisting mutex. ^Six static mutexes are -** used by the current version of SQLite. Future versions of SQLite -** may add additional static mutexes. Static mutexes are for internal -** use by SQLite only. Applications that use SQLite mutexes should -** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or -** SQLITE_MUTEX_RECURSIVE. -** -** ^Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST -** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc() -** returns a different mutex on every call. ^But for the static -** mutex types, the same mutex is returned on every call that has -** the same type number. -** -** ^The sqlite3_mutex_free() routine deallocates a previously -** allocated dynamic mutex. ^SQLite is careful to deallocate every -** dynamic mutex that it allocates. The dynamic mutexes must not be in -** use when they are deallocated. Attempting to deallocate a static -** mutex results in undefined behavior. ^SQLite never deallocates -** a static mutex. -** -** ^The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt -** to enter a mutex. ^If another thread is already within the mutex, -** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return -** SQLITE_BUSY. ^The sqlite3_mutex_try() interface returns [SQLITE_OK] -** upon successful entry. ^(Mutexes created using -** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread. -** In such cases the, -** mutex must be exited an equal number of times before another thread -** can enter.)^ ^(If the same thread tries to enter any other -** kind of mutex more than once, the behavior is undefined. -** SQLite will never exhibit -** such behavior in its own use of mutexes.)^ -** -** ^(Some systems (for example, Windows 95) do not support the operation -** implemented by sqlite3_mutex_try(). On those systems, sqlite3_mutex_try() -** will always return SQLITE_BUSY. The SQLite core only ever uses -** sqlite3_mutex_try() as an optimization so this is acceptable behavior.)^ -** -** ^The sqlite3_mutex_leave() routine exits a mutex that was -** previously entered by the same thread. ^(The behavior -** is undefined if the mutex is not currently entered by the -** calling thread or is not currently allocated. SQLite will -** never do either.)^ -** -** ^If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or -** sqlite3_mutex_leave() is a NULL pointer, then all three routines -** behave as no-ops. -** -** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()]. -*/ -SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int); -SQLITE_API void sqlite3_mutex_free(sqlite3_mutex*); -SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex*); -SQLITE_API int sqlite3_mutex_try(sqlite3_mutex*); -SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*); - -/* -** CAPI3REF: Mutex Methods Object -** EXPERIMENTAL -** -** An instance of this structure defines the low-level routines -** used to allocate and use mutexes. -** -** Usually, the default mutex implementations provided by SQLite are -** sufficient, however the user has the option of substituting a custom -** implementation for specialized deployments or systems for which SQLite -** does not provide a suitable implementation. In this case, the user -** creates and populates an instance of this structure to pass -** to sqlite3_config() along with the [SQLITE_CONFIG_MUTEX] option. -** Additionally, an instance of this structure can be used as an -** output variable when querying the system for the current mutex -** implementation, using the [SQLITE_CONFIG_GETMUTEX] option. -** -** ^The xMutexInit method defined by this structure is invoked as -** part of system initialization by the sqlite3_initialize() function. -** ^The xMutexInit routine is calle by SQLite exactly once for each -** effective call to [sqlite3_initialize()]. -** -** ^The xMutexEnd method defined by this structure is invoked as -** part of system shutdown by the sqlite3_shutdown() function. The -** implementation of this method is expected to release all outstanding -** resources obtained by the mutex methods implementation, especially -** those obtained by the xMutexInit method. ^The xMutexEnd() -** interface is invoked exactly once for each call to [sqlite3_shutdown()]. -** -** ^(The remaining seven methods defined by this structure (xMutexAlloc, -** xMutexFree, xMutexEnter, xMutexTry, xMutexLeave, xMutexHeld and -** xMutexNotheld) implement the following interfaces (respectively): -** -**
    -**
  • [sqlite3_mutex_alloc()]
    • -**
  • [sqlite3_mutex_free()]
    • -**
  • [sqlite3_mutex_enter()]
    • -**
  • [sqlite3_mutex_try()]
    • -**
  • [sqlite3_mutex_leave()]
    • -**
  • [sqlite3_mutex_held()]
    • -**
  • [sqlite3_mutex_notheld()]
    • -**
)^ -** -** The only difference is that the public sqlite3_XXX functions enumerated -** above silently ignore any invocations that pass a NULL pointer instead -** of a valid mutex handle. The implementations of the methods defined -** by this structure are not required to handle this case, the results -** of passing a NULL pointer instead of a valid mutex handle are undefined -** (i.e. it is acceptable to provide an implementation that segfaults if -** it is passed a NULL pointer). -** -** The xMutexInit() method must be threadsafe. ^It must be harmless to -** invoke xMutexInit() mutiple times within the same process and without -** intervening calls to xMutexEnd(). Second and subsequent calls to -** xMutexInit() must be no-ops. -** -** ^xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()] -** and its associates). ^Similarly, xMutexAlloc() must not use SQLite memory -** allocation for a static mutex. ^However xMutexAlloc() may use SQLite -** memory allocation for a fast or recursive mutex. -** -** ^SQLite will invoke the xMutexEnd() method when [sqlite3_shutdown()] is -** called, but only if the prior call to xMutexInit returned SQLITE_OK. -** If xMutexInit fails in any way, it is expected to clean up after itself -** prior to returning. -*/ -typedef struct sqlite3_mutex_methods sqlite3_mutex_methods; -struct sqlite3_mutex_methods { - int (*xMutexInit)(void); - int (*xMutexEnd)(void); - sqlite3_mutex *(*xMutexAlloc)(int); - void (*xMutexFree)(sqlite3_mutex *); - void (*xMutexEnter)(sqlite3_mutex *); - int (*xMutexTry)(sqlite3_mutex *); - void (*xMutexLeave)(sqlite3_mutex *); - int (*xMutexHeld)(sqlite3_mutex *); - int (*xMutexNotheld)(sqlite3_mutex *); -}; - -/* -** CAPI3REF: Mutex Verification Routines -** -** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines -** are intended for use inside assert() statements. ^The SQLite core -** never uses these routines except inside an assert() and applications -** are advised to follow the lead of the core. ^The SQLite core only -** provides implementations for these routines when it is compiled -** with the SQLITE_DEBUG flag. ^External mutex implementations -** are only required to provide these routines if SQLITE_DEBUG is -** defined and if NDEBUG is not defined. -** -** ^These routines should return true if the mutex in their argument -** is held or not held, respectively, by the calling thread. -** -** ^The implementation is not required to provided versions of these -** routines that actually work. If the implementation does not provide working -** versions of these routines, it should at least provide stubs that always -** return true so that one does not get spurious assertion failures. -** -** ^If the argument to sqlite3_mutex_held() is a NULL pointer then -** the routine should return 1. This seems counter-intuitive since -** clearly the mutex cannot be held if it does not exist. But the -** the reason the mutex does not exist is because the build is not -** using mutexes. And we do not want the assert() containing the -** call to sqlite3_mutex_held() to fail, so a non-zero return is -** the appropriate thing to do. ^The sqlite3_mutex_notheld() -** interface should also return 1 when given a NULL pointer. -*/ -#ifndef NDEBUG -SQLITE_API int sqlite3_mutex_held(sqlite3_mutex*); -SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*); -#endif - -/* -** CAPI3REF: Mutex Types -** -** The [sqlite3_mutex_alloc()] interface takes a single argument -** which is one of these integer constants. -** -** The set of static mutexes may change from one SQLite release to the -** next. Applications that override the built-in mutex logic must be -** prepared to accommodate additional static mutexes. -*/ -#define SQLITE_MUTEX_FAST 0 -#define SQLITE_MUTEX_RECURSIVE 1 -#define SQLITE_MUTEX_STATIC_MASTER 2 -#define SQLITE_MUTEX_STATIC_MEM 3 /* sqlite3_malloc() */ -#define SQLITE_MUTEX_STATIC_MEM2 4 /* NOT USED */ -#define SQLITE_MUTEX_STATIC_OPEN 4 /* sqlite3BtreeOpen() */ -#define SQLITE_MUTEX_STATIC_PRNG 5 /* sqlite3_random() */ -#define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */ -#define SQLITE_MUTEX_STATIC_LRU2 7 /* lru page list */ - -/* -** CAPI3REF: Retrieve the mutex for a database connection -** -** ^This interface returns a pointer the [sqlite3_mutex] object that -** serializes access to the [database connection] given in the argument -** when the [threading mode] is Serialized. -** ^If the [threading mode] is Single-thread or Multi-thread then this -** routine returns a NULL pointer. -*/ -SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*); - -/* -** CAPI3REF: Low-Level Control Of Database Files -** -** ^The [sqlite3_file_control()] interface makes a direct call to the -** xFileControl method for the [sqlite3_io_methods] object associated -** with a particular database identified by the second argument. ^The -** name of the database "main" for the main database or "temp" for the -** TEMP database, or the name that appears after the AS keyword for -** databases that are added using the [ATTACH] SQL command. -** ^A NULL pointer can be used in place of "main" to refer to the -** main database file. -** ^The third and fourth parameters to this routine -** are passed directly through to the second and third parameters of -** the xFileControl method. ^The return value of the xFileControl -** method becomes the return value of this routine. -** -** ^If the second parameter (zDbName) does not match the name of any -** open database file, then SQLITE_ERROR is returned. ^This error -** code is not remembered and will not be recalled by [sqlite3_errcode()] -** or [sqlite3_errmsg()]. The underlying xFileControl method might -** also return SQLITE_ERROR. There is no way to distinguish between -** an incorrect zDbName and an SQLITE_ERROR return from the underlying -** xFileControl method. -** -** See also: [SQLITE_FCNTL_LOCKSTATE] -*/ -SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*); - -/* -** CAPI3REF: Testing Interface -** -** ^The sqlite3_test_control() interface is used to read out internal -** state of SQLite and to inject faults into SQLite for testing -** purposes. ^The first parameter is an operation code that determines -** the number, meaning, and operation of all subsequent parameters. -** -** This interface is not for use by applications. It exists solely -** for verifying the correct operation of the SQLite library. Depending -** on how the SQLite library is compiled, this interface might not exist. -** -** The details of the operation codes, their meanings, the parameters -** they take, and what they do are all subject to change without notice. -** Unlike most of the SQLite API, this function is not guaranteed to -** operate consistently from one release to the next. -*/ -SQLITE_API int sqlite3_test_control(int op, ...); - -/* -** CAPI3REF: Testing Interface Operation Codes -** -** These constants are the valid operation code parameters used -** as the first argument to [sqlite3_test_control()]. -** -** These parameters and their meanings are subject to change -** without notice. These values are for testing purposes only. -** Applications should not use any of these parameters or the -** [sqlite3_test_control()] interface. -*/ -#define SQLITE_TESTCTRL_FIRST 5 -#define SQLITE_TESTCTRL_PRNG_SAVE 5 -#define SQLITE_TESTCTRL_PRNG_RESTORE 6 -#define SQLITE_TESTCTRL_PRNG_RESET 7 -#define SQLITE_TESTCTRL_BITVEC_TEST 8 -#define SQLITE_TESTCTRL_FAULT_INSTALL 9 -#define SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS 10 -#define SQLITE_TESTCTRL_PENDING_BYTE 11 -#define SQLITE_TESTCTRL_ASSERT 12 -#define SQLITE_TESTCTRL_ALWAYS 13 -#define SQLITE_TESTCTRL_RESERVE 14 -#define SQLITE_TESTCTRL_OPTIMIZATIONS 15 -#define SQLITE_TESTCTRL_ISKEYWORD 16 -#define SQLITE_TESTCTRL_LAST 16 - -/* -** CAPI3REF: SQLite Runtime Status -** EXPERIMENTAL -** -** ^This interface is used to retrieve runtime status information -** about the preformance of SQLite, and optionally to reset various -** highwater marks. ^The first argument is an integer code for -** the specific parameter to measure. ^(Recognized integer codes -** are of the form [SQLITE_STATUS_MEMORY_USED | SQLITE_STATUS_...].)^ -** ^The current value of the parameter is returned into *pCurrent. -** ^The highest recorded value is returned in *pHighwater. ^If the -** resetFlag is true, then the highest record value is reset after -** *pHighwater is written. ^(Some parameters do not record the highest -** value. For those parameters -** nothing is written into *pHighwater and the resetFlag is ignored.)^ -** ^(Other parameters record only the highwater mark and not the current -** value. For these latter parameters nothing is written into *pCurrent.)^ -** -** ^The sqlite3_db_status() routine returns SQLITE_OK on success and a -** non-zero [error code] on failure. -** -** This routine is threadsafe but is not atomic. This routine can be -** called while other threads are running the same or different SQLite -** interfaces. However the values returned in *pCurrent and -** *pHighwater reflect the status of SQLite at different points in time -** and it is possible that another thread might change the parameter -** in between the times when *pCurrent and *pHighwater are written. -** -** See also: [sqlite3_db_status()] -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag); - - -/* -** CAPI3REF: Status Parameters -** EXPERIMENTAL -** -** These integer constants designate various run-time status parameters -** that can be returned by [sqlite3_status()]. -** -**
-** ^(
SQLITE_STATUS_MEMORY_USED
-**
This parameter is the current amount of memory checked out -** using [sqlite3_malloc()], either directly or indirectly. The -** figure includes calls made to [sqlite3_malloc()] by the application -** and internal memory usage by the SQLite library. Scratch memory -** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache -** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in -** this parameter. The amount returned is the sum of the allocation -** sizes as reported by the xSize method in [sqlite3_mem_methods].
)^ -** -** ^(
SQLITE_STATUS_MALLOC_SIZE
-**
This parameter records the largest memory allocation request -** handed to [sqlite3_malloc()] or [sqlite3_realloc()] (or their -** internal equivalents). Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.
)^ -** -** ^(
SQLITE_STATUS_PAGECACHE_USED
-**
This parameter returns the number of pages used out of the -** [pagecache memory allocator] that was configured using -** [SQLITE_CONFIG_PAGECACHE]. The -** value returned is in pages, not in bytes.
)^ -** -** ^(
SQLITE_STATUS_PAGECACHE_OVERFLOW
-**
This parameter returns the number of bytes of page cache -** allocation which could not be statisfied by the [SQLITE_CONFIG_PAGECACHE] -** buffer and where forced to overflow to [sqlite3_malloc()]. The -** returned value includes allocations that overflowed because they -** where too large (they were larger than the "sz" parameter to -** [SQLITE_CONFIG_PAGECACHE]) and allocations that overflowed because -** no space was left in the page cache.
)^ -** -** ^(
SQLITE_STATUS_PAGECACHE_SIZE
-**
This parameter records the largest memory allocation request -** handed to [pagecache memory allocator]. Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.
)^ -** -** ^(
SQLITE_STATUS_SCRATCH_USED
-**
This parameter returns the number of allocations used out of the -** [scratch memory allocator] configured using -** [SQLITE_CONFIG_SCRATCH]. The value returned is in allocations, not -** in bytes. Since a single thread may only have one scratch allocation -** outstanding at time, this parameter also reports the number of threads -** using scratch memory at the same time.
)^ -** -** ^(
SQLITE_STATUS_SCRATCH_OVERFLOW
-**
This parameter returns the number of bytes of scratch memory -** allocation which could not be statisfied by the [SQLITE_CONFIG_SCRATCH] -** buffer and where forced to overflow to [sqlite3_malloc()]. The values -** returned include overflows because the requested allocation was too -** larger (that is, because the requested allocation was larger than the -** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer -** slots were available. -**
)^ -** -** ^(
SQLITE_STATUS_SCRATCH_SIZE
-**
This parameter records the largest memory allocation request -** handed to [scratch memory allocator]. Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.
)^ -** -** ^(
SQLITE_STATUS_PARSER_STACK
-**
This parameter records the deepest parser stack. It is only -** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].
)^ -**
-** -** New status parameters may be added from time to time. -*/ -#define SQLITE_STATUS_MEMORY_USED 0 -#define SQLITE_STATUS_PAGECACHE_USED 1 -#define SQLITE_STATUS_PAGECACHE_OVERFLOW 2 -#define SQLITE_STATUS_SCRATCH_USED 3 -#define SQLITE_STATUS_SCRATCH_OVERFLOW 4 -#define SQLITE_STATUS_MALLOC_SIZE 5 -#define SQLITE_STATUS_PARSER_STACK 6 -#define SQLITE_STATUS_PAGECACHE_SIZE 7 -#define SQLITE_STATUS_SCRATCH_SIZE 8 - -/* -** CAPI3REF: Database Connection Status -** EXPERIMENTAL -** -** ^This interface is used to retrieve runtime status information -** about a single [database connection]. ^The first argument is the -** database connection object to be interrogated. ^The second argument -** is the parameter to interrogate. ^Currently, the only allowed value -** for the second parameter is [SQLITE_DBSTATUS_LOOKASIDE_USED]. -** Additional options will likely appear in future releases of SQLite. -** -** ^The current value of the requested parameter is written into *pCur -** and the highest instantaneous value is written into *pHiwtr. ^If -** the resetFlg is true, then the highest instantaneous value is -** reset back down to the current value. -** -** See also: [sqlite3_status()] and [sqlite3_stmt_status()]. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg); - -/* -** CAPI3REF: Status Parameters for database connections -** EXPERIMENTAL -** -** These constants are the available integer "verbs" that can be passed as -** the second argument to the [sqlite3_db_status()] interface. -** -** New verbs may be added in future releases of SQLite. Existing verbs -** might be discontinued. Applications should check the return code from -** [sqlite3_db_status()] to make sure that the call worked. -** The [sqlite3_db_status()] interface will return a non-zero error code -** if a discontinued or unsupported verb is invoked. -** -**
-** ^(
SQLITE_DBSTATUS_LOOKASIDE_USED
-**
This parameter returns the number of lookaside memory slots currently -** checked out.
)^ -**
-*/ -#define SQLITE_DBSTATUS_LOOKASIDE_USED 0 - - -/* -** CAPI3REF: Prepared Statement Status -** EXPERIMENTAL -** -** ^(Each prepared statement maintains various -** [SQLITE_STMTSTATUS_SORT | counters] that measure the number -** of times it has performed specific operations.)^ These counters can -** be used to monitor the performance characteristics of the prepared -** statements. For example, if the number of table steps greatly exceeds -** the number of table searches or result rows, that would tend to indicate -** that the prepared statement is using a full table scan rather than -** an index. -** -** ^(This interface is used to retrieve and reset counter values from -** a [prepared statement]. The first argument is the prepared statement -** object to be interrogated. The second argument -** is an integer code for a specific [SQLITE_STMTSTATUS_SORT | counter] -** to be interrogated.)^ -** ^The current value of the requested counter is returned. -** ^If the resetFlg is true, then the counter is reset to zero after this -** interface call returns. -** -** See also: [sqlite3_status()] and [sqlite3_db_status()]. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg); - -/* -** CAPI3REF: Status Parameters for prepared statements -** EXPERIMENTAL -** -** These preprocessor macros define integer codes that name counter -** values associated with the [sqlite3_stmt_status()] interface. -** The meanings of the various counters are as follows: -** -**
-**
SQLITE_STMTSTATUS_FULLSCAN_STEP
-**
^This is the number of times that SQLite has stepped forward in -** a table as part of a full table scan. Large numbers for this counter -** may indicate opportunities for performance improvement through -** careful use of indices.
-** -**
SQLITE_STMTSTATUS_SORT
-**
^This is the number of sort operations that have occurred. -** A non-zero value in this counter may indicate an opportunity to -** improvement performance through careful use of indices.
-** -**
-*/ -#define SQLITE_STMTSTATUS_FULLSCAN_STEP 1 -#define SQLITE_STMTSTATUS_SORT 2 - -/* -** CAPI3REF: Custom Page Cache Object -** EXPERIMENTAL -** -** The sqlite3_pcache type is opaque. It is implemented by -** the pluggable module. The SQLite core has no knowledge of -** its size or internal structure and never deals with the -** sqlite3_pcache object except by holding and passing pointers -** to the object. -** -** See [sqlite3_pcache_methods] for additional information. -*/ -typedef struct sqlite3_pcache sqlite3_pcache; - -/* -** CAPI3REF: Application Defined Page Cache. -** KEYWORDS: {page cache} -** EXPERIMENTAL -** -** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE], ...) interface can -** register an alternative page cache implementation by passing in an -** instance of the sqlite3_pcache_methods structure.)^ The majority of the -** heap memory used by SQLite is used by the page cache to cache data read -** from, or ready to be written to, the database file. By implementing a -** custom page cache using this API, an application can control more -** precisely the amount of memory consumed by SQLite, the way in which -** that memory is allocated and released, and the policies used to -** determine exactly which parts of a database file are cached and for -** how long. -** -** ^(The contents of the sqlite3_pcache_methods structure are copied to an -** internal buffer by SQLite within the call to [sqlite3_config]. Hence -** the application may discard the parameter after the call to -** [sqlite3_config()] returns.)^ -** -** ^The xInit() method is called once for each call to [sqlite3_initialize()] -** (usually only once during the lifetime of the process). ^(The xInit() -** method is passed a copy of the sqlite3_pcache_methods.pArg value.)^ -** ^The xInit() method can set up up global structures and/or any mutexes -** required by the custom page cache implementation. -** -** ^The xShutdown() method is called from within [sqlite3_shutdown()], -** if the application invokes this API. It can be used to clean up -** any outstanding resources before process shutdown, if required. -** -** ^SQLite holds a [SQLITE_MUTEX_RECURSIVE] mutex when it invokes -** the xInit method, so the xInit method need not be threadsafe. ^The -** xShutdown method is only called from [sqlite3_shutdown()] so it does -** not need to be threadsafe either. All other methods must be threadsafe -** in multithreaded applications. -** -** ^SQLite will never invoke xInit() more than once without an intervening -** call to xShutdown(). -** -** ^The xCreate() method is used to construct a new cache instance. SQLite -** will typically create one cache instance for each open database file, -** though this is not guaranteed. ^The -** first parameter, szPage, is the size in bytes of the pages that must -** be allocated by the cache. ^szPage will not be a power of two. ^szPage -** will the page size of the database file that is to be cached plus an -** increment (here called "R") of about 100 or 200. ^SQLite will use the -** extra R bytes on each page to store metadata about the underlying -** database page on disk. The value of R depends -** on the SQLite version, the target platform, and how SQLite was compiled. -** ^R is constant for a particular build of SQLite. ^The second argument to -** xCreate(), bPurgeable, is true if the cache being created will -** be used to cache database pages of a file stored on disk, or -** false if it is used for an in-memory database. ^The cache implementation -** does not have to do anything special based with the value of bPurgeable; -** it is purely advisory. ^On a cache where bPurgeable is false, SQLite will -** never invoke xUnpin() except to deliberately delete a page. -** ^In other words, a cache created with bPurgeable set to false will -** never contain any unpinned pages. -** -** ^(The xCachesize() method may be called at any time by SQLite to set the -** suggested maximum cache-size (number of pages stored by) the cache -** instance passed as the first argument. This is the value configured using -** the SQLite "[PRAGMA cache_size]" command.)^ ^As with the bPurgeable -** parameter, the implementation is not required to do anything with this -** value; it is advisory only. -** -** ^The xPagecount() method should return the number of pages currently -** stored in the cache. -** -** ^The xFetch() method is used to fetch a page and return a pointer to it. -** ^A 'page', in this context, is a buffer of szPage bytes aligned at an -** 8-byte boundary. ^The page to be fetched is determined by the key. ^The -** mimimum key value is 1. After it has been retrieved using xFetch, the page -** is considered to be "pinned". -** -** ^If the requested page is already in the page cache, then the page cache -** implementation must return a pointer to the page buffer with its content -** intact. ^(If the requested page is not already in the cache, then the -** behavior of the cache implementation is determined by the value of the -** createFlag parameter passed to xFetch, according to the following table: -** -** -**
createFlag Behaviour when page is not already in cache -**
0 Do not allocate a new page. Return NULL. -**
1 Allocate a new page if it easy and convenient to do so. -** Otherwise return NULL. -**
2 Make every effort to allocate a new page. Only return -** NULL if allocating a new page is effectively impossible. -**
)^ -** -** SQLite will normally invoke xFetch() with a createFlag of 0 or 1. If -** a call to xFetch() with createFlag==1 returns NULL, then SQLite will -** attempt to unpin one or more cache pages by spilling the content of -** pinned pages to disk and synching the operating system disk cache. After -** attempting to unpin pages, the xFetch() method will be invoked again with -** a createFlag of 2. -** -** ^xUnpin() is called by SQLite with a pointer to a currently pinned page -** as its second argument. ^(If the third parameter, discard, is non-zero, -** then the page should be evicted from the cache. In this case SQLite -** assumes that the next time the page is retrieved from the cache using -** the xFetch() method, it will be zeroed.)^ ^If the discard parameter is -** zero, then the page is considered to be unpinned. ^The cache implementation -** may choose to evict unpinned pages at any time. -** -** ^(The cache is not required to perform any reference counting. A single -** call to xUnpin() unpins the page regardless of the number of prior calls -** to xFetch().)^ -** -** ^The xRekey() method is used to change the key value associated with the -** page passed as the second argument from oldKey to newKey. ^If the cache -** previously contains an entry associated with newKey, it should be -** discarded. ^Any prior cache entry associated with newKey is guaranteed not -** to be pinned. -** -** ^When SQLite calls the xTruncate() method, the cache must discard all -** existing cache entries with page numbers (keys) greater than or equal -** to the value of the iLimit parameter passed to xTruncate(). ^If any -** of these pages are pinned, they are implicitly unpinned, meaning that -** they can be safely discarded. -** -** ^The xDestroy() method is used to delete a cache allocated by xCreate(). -** All resources associated with the specified cache should be freed. ^After -** calling the xDestroy() method, SQLite considers the [sqlite3_pcache*] -** handle invalid, and will not use it with any other sqlite3_pcache_methods -** functions. -*/ -typedef struct sqlite3_pcache_methods sqlite3_pcache_methods; -struct sqlite3_pcache_methods { - void *pArg; - int (*xInit)(void*); - void (*xShutdown)(void*); - sqlite3_pcache *(*xCreate)(int szPage, int bPurgeable); - void (*xCachesize)(sqlite3_pcache*, int nCachesize); - int (*xPagecount)(sqlite3_pcache*); - void *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag); - void (*xUnpin)(sqlite3_pcache*, void*, int discard); - void (*xRekey)(sqlite3_pcache*, void*, unsigned oldKey, unsigned newKey); - void (*xTruncate)(sqlite3_pcache*, unsigned iLimit); - void (*xDestroy)(sqlite3_pcache*); -}; - -/* -** CAPI3REF: Online Backup Object -** EXPERIMENTAL -** -** The sqlite3_backup object records state information about an ongoing -** online backup operation. ^The sqlite3_backup object is created by -** a call to [sqlite3_backup_init()] and is destroyed by a call to -** [sqlite3_backup_finish()]. -** -** See Also: [Using the SQLite Online Backup API] -*/ -typedef struct sqlite3_backup sqlite3_backup; - -/* -** CAPI3REF: Online Backup API. -** EXPERIMENTAL -** -** The backup API copies the content of one database into another. -** It is useful either for creating backups of databases or -** for copying in-memory databases to or from persistent files. -** -** See Also: [Using the SQLite Online Backup API] -** -** ^Exclusive access is required to the destination database for the -** duration of the operation. ^However the source database is only -** read-locked while it is actually being read; it is not locked -** continuously for the entire backup operation. ^Thus, the backup may be -** performed on a live source database without preventing other users from -** reading or writing to the source database while the backup is underway. -** -** ^(To perform a backup operation: -**
    -**
  1. sqlite3_backup_init() is called once to initialize the -** backup, -**
  2. sqlite3_backup_step() is called one or more times to transfer -** the data between the two databases, and finally -**
  3. sqlite3_backup_finish() is called to release all resources -** associated with the backup operation. -**
)^ -** There should be exactly one call to sqlite3_backup_finish() for each -** successful call to sqlite3_backup_init(). -** -** sqlite3_backup_init() -** -** ^The D and N arguments to sqlite3_backup_init(D,N,S,M) are the -** [database connection] associated with the destination database -** and the database name, respectively. -** ^The database name is "main" for the main database, "temp" for the -** temporary database, or the name specified after the AS keyword in -** an [ATTACH] statement for an attached database. -** ^The S and M arguments passed to -** sqlite3_backup_init(D,N,S,M) identify the [database connection] -** and database name of the source database, respectively. -** ^The source and destination [database connections] (parameters S and D) -** must be different or else sqlite3_backup_init(D,N,S,M) will file with -** an error. -** -** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is -** returned and an error code and error message are store3d in the -** destination [database connection] D. -** ^The error code and message for the failed call to sqlite3_backup_init() -** can be retrieved using the [sqlite3_errcode()], [sqlite3_errmsg()], and/or -** [sqlite3_errmsg16()] functions. -** ^A successful call to sqlite3_backup_init() returns a pointer to an -** [sqlite3_backup] object. -** ^The [sqlite3_backup] object may be used with the sqlite3_backup_step() and -** sqlite3_backup_finish() functions to perform the specified backup -** operation. -** -** sqlite3_backup_step() -** -** ^Function sqlite3_backup_step(B,N) will copy up to N pages between -** the source and destination databases specified by [sqlite3_backup] object B. -** ^If N is negative, all remaining source pages are copied. -** ^If sqlite3_backup_step(B,N) successfully copies N pages and there -** are still more pages to be copied, then the function resturns [SQLITE_OK]. -** ^If sqlite3_backup_step(B,N) successfully finishes copying all pages -** from source to destination, then it returns [SQLITE_DONE]. -** ^If an error occurs while running sqlite3_backup_step(B,N), -** then an [error code] is returned. ^As well as [SQLITE_OK] and -** [SQLITE_DONE], a call to sqlite3_backup_step() may return [SQLITE_READONLY], -** [SQLITE_NOMEM], [SQLITE_BUSY], [SQLITE_LOCKED], or an -** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX] extended error code. -** -** ^The sqlite3_backup_step() might return [SQLITE_READONLY] if the destination -** database was opened read-only or if -** the destination is an in-memory database with a different page size -** from the source database. -** -** ^If sqlite3_backup_step() cannot obtain a required file-system lock, then -** the [sqlite3_busy_handler | busy-handler function] -** is invoked (if one is specified). ^If the -** busy-handler returns non-zero before the lock is available, then -** [SQLITE_BUSY] is returned to the caller. ^In this case the call to -** sqlite3_backup_step() can be retried later. ^If the source -** [database connection] -** is being used to write to the source database when sqlite3_backup_step() -** is called, then [SQLITE_LOCKED] is returned immediately. ^Again, in this -** case the call to sqlite3_backup_step() can be retried later on. ^(If -** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX], [SQLITE_NOMEM], or -** [SQLITE_READONLY] is returned, then -** there is no point in retrying the call to sqlite3_backup_step(). These -** errors are considered fatal.)^ The application must accept -** that the backup operation has failed and pass the backup operation handle -** to the sqlite3_backup_finish() to release associated resources. -** -** ^The first call to sqlite3_backup_step() obtains an exclusive lock -** on the destination file. ^The exclusive lock is not released until either -** sqlite3_backup_finish() is called or the backup operation is complete -** and sqlite3_backup_step() returns [SQLITE_DONE]. ^Every call to -** sqlite3_backup_step() obtains a [shared lock] on the source database that -** lasts for the duration of the sqlite3_backup_step() call. -** ^Because the source database is not locked between calls to -** sqlite3_backup_step(), the source database may be modified mid-way -** through the backup process. ^If the source database is modified by an -** external process or via a database connection other than the one being -** used by the backup operation, then the backup will be automatically -** restarted by the next call to sqlite3_backup_step(). ^If the source -** database is modified by the using the same database connection as is used -** by the backup operation, then the backup database is automatically -** updated at the same time. -** -** sqlite3_backup_finish() -** -** When sqlite3_backup_step() has returned [SQLITE_DONE], or when the -** application wishes to abandon the backup operation, the application -** should destroy the [sqlite3_backup] by passing it to sqlite3_backup_finish(). -** ^The sqlite3_backup_finish() interfaces releases all -** resources associated with the [sqlite3_backup] object. -** ^If sqlite3_backup_step() has not yet returned [SQLITE_DONE], then any -** active write-transaction on the destination database is rolled back. -** The [sqlite3_backup] object is invalid -** and may not be used following a call to sqlite3_backup_finish(). -** -** ^The value returned by sqlite3_backup_finish is [SQLITE_OK] if no -** sqlite3_backup_step() errors occurred, regardless or whether or not -** sqlite3_backup_step() completed. -** ^If an out-of-memory condition or IO error occurred during any prior -** sqlite3_backup_step() call on the same [sqlite3_backup] object, then -** sqlite3_backup_finish() returns the corresponding [error code]. -** -** ^A return of [SQLITE_BUSY] or [SQLITE_LOCKED] from sqlite3_backup_step() -** is not a permanent error and does not affect the return value of -** sqlite3_backup_finish(). -** -** sqlite3_backup_remaining(), sqlite3_backup_pagecount() -** -** ^Each call to sqlite3_backup_step() sets two values inside -** the [sqlite3_backup] object: the number of pages still to be backed -** up and the total number of pages in the source databae file. -** The sqlite3_backup_remaining() and sqlite3_backup_pagecount() interfaces -** retrieve these two values, respectively. -** -** ^The values returned by these functions are only updated by -** sqlite3_backup_step(). ^If the source database is modified during a backup -** operation, then the values are not updated to account for any extra -** pages that need to be updated or the size of the source database file -** changing. -** -** Concurrent Usage of Database Handles -** -** ^The source [database connection] may be used by the application for other -** purposes while a backup operation is underway or being initialized. -** ^If SQLite is compiled and configured to support threadsafe database -** connections, then the source database connection may be used concurrently -** from within other threads. -** -** However, the application must guarantee that the destination -** [database connection] is not passed to any other API (by any thread) after -** sqlite3_backup_init() is called and before the corresponding call to -** sqlite3_backup_finish(). SQLite does not currently check to see -** if the application incorrectly accesses the destination [database connection] -** and so no error code is reported, but the operations may malfunction -** nevertheless. Use of the destination database connection while a -** backup is in progress might also also cause a mutex deadlock. -** -** If running in [shared cache mode], the application must -** guarantee that the shared cache used by the destination database -** is not accessed while the backup is running. In practice this means -** that the application must guarantee that the disk file being -** backed up to is not accessed by any connection within the process, -** not just the specific connection that was passed to sqlite3_backup_init(). -** -** The [sqlite3_backup] object itself is partially threadsafe. Multiple -** threads may safely make multiple concurrent calls to sqlite3_backup_step(). -** However, the sqlite3_backup_remaining() and sqlite3_backup_pagecount() -** APIs are not strictly speaking threadsafe. If they are invoked at the -** same time as another thread is invoking sqlite3_backup_step() it is -** possible that they return invalid values. -*/ -SQLITE_API sqlite3_backup *sqlite3_backup_init( - sqlite3 *pDest, /* Destination database handle */ - const char *zDestName, /* Destination database name */ - sqlite3 *pSource, /* Source database handle */ - const char *zSourceName /* Source database name */ -); -SQLITE_API int sqlite3_backup_step(sqlite3_backup *p, int nPage); -SQLITE_API int sqlite3_backup_finish(sqlite3_backup *p); -SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p); -SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p); - -/* -** CAPI3REF: Unlock Notification -** EXPERIMENTAL -** -** ^When running in shared-cache mode, a database operation may fail with -** an [SQLITE_LOCKED] error if the required locks on the shared-cache or -** individual tables within the shared-cache cannot be obtained. See -** [SQLite Shared-Cache Mode] for a description of shared-cache locking. -** ^This API may be used to register a callback that SQLite will invoke -** when the connection currently holding the required lock relinquishes it. -** ^This API is only available if the library was compiled with the -** [SQLITE_ENABLE_UNLOCK_NOTIFY] C-preprocessor symbol defined. -** -** See Also: [Using the SQLite Unlock Notification Feature]. -** -** ^Shared-cache locks are released when a database connection concludes -** its current transaction, either by committing it or rolling it back. -** -** ^When a connection (known as the blocked connection) fails to obtain a -** shared-cache lock and SQLITE_LOCKED is returned to the caller, the -** identity of the database connection (the blocking connection) that -** has locked the required resource is stored internally. ^After an -** application receives an SQLITE_LOCKED error, it may call the -** sqlite3_unlock_notify() method with the blocked connection handle as -** the first argument to register for a callback that will be invoked -** when the blocking connections current transaction is concluded. ^The -** callback is invoked from within the [sqlite3_step] or [sqlite3_close] -** call that concludes the blocking connections transaction. -** -** ^(If sqlite3_unlock_notify() is called in a multi-threaded application, -** there is a chance that the blocking connection will have already -** concluded its transaction by the time sqlite3_unlock_notify() is invoked. -** If this happens, then the specified callback is invoked immediately, -** from within the call to sqlite3_unlock_notify().)^ -** -** ^If the blocked connection is attempting to obtain a write-lock on a -** shared-cache table, and more than one other connection currently holds -** a read-lock on the same table, then SQLite arbitrarily selects one of -** the other connections to use as the blocking connection. -** -** ^(There may be at most one unlock-notify callback registered by a -** blocked connection. If sqlite3_unlock_notify() is called when the -** blocked connection already has a registered unlock-notify callback, -** then the new callback replaces the old.)^ ^If sqlite3_unlock_notify() is -** called with a NULL pointer as its second argument, then any existing -** unlock-notify callback is cancelled. ^The blocked connections -** unlock-notify callback may also be canceled by closing the blocked -** connection using [sqlite3_close()]. -** -** The unlock-notify callback is not reentrant. If an application invokes -** any sqlite3_xxx API functions from within an unlock-notify callback, a -** crash or deadlock may be the result. -** -** ^Unless deadlock is detected (see below), sqlite3_unlock_notify() always -** returns SQLITE_OK. -** -** Callback Invocation Details -** -** When an unlock-notify callback is registered, the application provides a -** single void* pointer that is passed to the callback when it is invoked. -** However, the signature of the callback function allows SQLite to pass -** it an array of void* context pointers. The first argument passed to -** an unlock-notify callback is a pointer to an array of void* pointers, -** and the second is the number of entries in the array. -** -** When a blocking connections transaction is concluded, there may be -** more than one blocked connection that has registered for an unlock-notify -** callback. ^If two or more such blocked connections have specified the -** same callback function, then instead of invoking the callback function -** multiple times, it is invoked once with the set of void* context pointers -** specified by the blocked connections bundled together into an array. -** This gives the application an opportunity to prioritize any actions -** related to the set of unblocked database connections. -** -** Deadlock Detection -** -** Assuming that after registering for an unlock-notify callback a -** database waits for the callback to be issued before taking any further -** action (a reasonable assumption), then using this API may cause the -** application to deadlock. For example, if connection X is waiting for -** connection Y's transaction to be concluded, and similarly connection -** Y is waiting on connection X's transaction, then neither connection -** will proceed and the system may remain deadlocked indefinitely. -** -** To avoid this scenario, the sqlite3_unlock_notify() performs deadlock -** detection. ^If a given call to sqlite3_unlock_notify() would put the -** system in a deadlocked state, then SQLITE_LOCKED is returned and no -** unlock-notify callback is registered. The system is said to be in -** a deadlocked state if connection A has registered for an unlock-notify -** callback on the conclusion of connection B's transaction, and connection -** B has itself registered for an unlock-notify callback when connection -** A's transaction is concluded. ^Indirect deadlock is also detected, so -** the system is also considered to be deadlocked if connection B has -** registered for an unlock-notify callback on the conclusion of connection -** C's transaction, where connection C is waiting on connection A. ^Any -** number of levels of indirection are allowed. -** -** The "DROP TABLE" Exception -** -** When a call to [sqlite3_step()] returns SQLITE_LOCKED, it is almost -** always appropriate to call sqlite3_unlock_notify(). There is however, -** one exception. When executing a "DROP TABLE" or "DROP INDEX" statement, -** SQLite checks if there are any currently executing SELECT statements -** that belong to the same connection. If there are, SQLITE_LOCKED is -** returned. In this case there is no "blocking connection", so invoking -** sqlite3_unlock_notify() results in the unlock-notify callback being -** invoked immediately. If the application then re-attempts the "DROP TABLE" -** or "DROP INDEX" query, an infinite loop might be the result. -** -** One way around this problem is to check the extended error code returned -** by an sqlite3_step() call. ^(If there is a blocking connection, then the -** extended error code is set to SQLITE_LOCKED_SHAREDCACHE. Otherwise, in -** the special "DROP TABLE/INDEX" case, the extended error code is just -** SQLITE_LOCKED.)^ -*/ -SQLITE_API int sqlite3_unlock_notify( - sqlite3 *pBlocked, /* Waiting connection */ - void (*xNotify)(void **apArg, int nArg), /* Callback function to invoke */ - void *pNotifyArg /* Argument to pass to xNotify */ -); - - -/* -** CAPI3REF: String Comparison -** EXPERIMENTAL -** -** ^The [sqlite3_strnicmp()] API allows applications and extensions to -** compare the contents of two buffers containing UTF-8 strings in a -** case-indendent fashion, using the same definition of case independence -** that SQLite uses internally when comparing identifiers. -*/ -SQLITE_API int sqlite3_strnicmp(const char *, const char *, int); - -/* -** CAPI3REF: Error Logging Interface -** EXPERIMENTAL -** -** ^The [sqlite3_log()] interface writes a message into the error log -** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()]. -** ^If logging is enabled, the zFormat string and subsequent arguments are -** passed through to [sqlite3_vmprintf()] to generate the final output string. -** -** The sqlite3_log() interface is intended for use by extensions such as -** virtual tables, collating functions, and SQL functions. While there is -** nothing to prevent an application from calling sqlite3_log(), doing so -** is considered bad form. -** -** The zFormat string must not be NULL. -** -** To avoid deadlocks and other threading problems, the sqlite3_log() routine -** will not use dynamically allocated memory. The log message is stored in -** a fixed-length buffer on the stack. If the log message is longer than -** a few hundred characters, it will be truncated to the length of the -** buffer. -*/ -SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...); - -/* -** Undo the hack that converts floating point types to integer for -** builds on processors without floating point support. -*/ -#ifdef SQLITE_OMIT_FLOATING_POINT -# undef double -#endif - -#if 0 -} /* End of the 'extern "C"' block */ -#endif -#endif - - -/************** End of sqlite3.h *********************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ -/************** Include hash.h in the middle of sqliteInt.h ******************/ -/************** Begin file hash.h ********************************************/ -/* -** 2001 September 22 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This is the header file for the generic hash-table implemenation -** used in SQLite. -*/ -#ifndef _SQLITE_HASH_H_ -#define _SQLITE_HASH_H_ - -/* Forward declarations of structures. */ -typedef struct Hash Hash; -typedef struct HashElem HashElem; - -/* A complete hash table is an instance of the following structure. -** The internals of this structure are intended to be opaque -- client -** code should not attempt to access or modify the fields of this structure -** directly. Change this structure only by using the routines below. -** However, some of the "procedures" and "functions" for modifying and -** accessing this structure are really macros, so we can't really make -** this structure opaque. -** -** All elements of the hash table are on a single doubly-linked list. -** Hash.first points to the head of this list. -** -** There are Hash.htsize buckets. Each bucket points to a spot in -** the global doubly-linked list. The contents of the bucket are the -** element pointed to plus the next _ht.count-1 elements in the list. -** -** Hash.htsize and Hash.ht may be zero. In that case lookup is done -** by a linear search of the global list. For small tables, the -** Hash.ht table is never allocated because if there are few elements -** in the table, it is faster to do a linear search than to manage -** the hash table. -*/ -struct Hash { - unsigned int htsize; /* Number of buckets in the hash table */ - unsigned int count; /* Number of entries in this table */ - HashElem *first; /* The first element of the array */ - struct _ht { /* the hash table */ - int count; /* Number of entries with this hash */ - HashElem *chain; /* Pointer to first entry with this hash */ - } *ht; -}; - -/* Each element in the hash table is an instance of the following -** structure. All elements are stored on a single doubly-linked list. -** -** Again, this structure is intended to be opaque, but it can't really -** be opaque because it is used by macros. -*/ -struct HashElem { - HashElem *next, *prev; /* Next and previous elements in the table */ - void *data; /* Data associated with this element */ - const char *pKey; int nKey; /* Key associated with this element */ -}; - -/* -** Access routines. To delete, insert a NULL pointer. -*/ -SQLITE_PRIVATE void sqlite3HashInit(Hash*); -SQLITE_PRIVATE void *sqlite3HashInsert(Hash*, const char *pKey, int nKey, void *pData); -SQLITE_PRIVATE void *sqlite3HashFind(const Hash*, const char *pKey, int nKey); -SQLITE_PRIVATE void sqlite3HashClear(Hash*); - -/* -** Macros for looping over all elements of a hash table. The idiom is -** like this: -** -** Hash h; -** HashElem *p; -** ... -** for(p=sqliteHashFirst(&h); p; p=sqliteHashNext(p)){ -** SomeStructure *pData = sqliteHashData(p); -** // do something with pData -** } -*/ -#define sqliteHashFirst(H) ((H)->first) -#define sqliteHashNext(E) ((E)->next) -#define sqliteHashData(E) ((E)->data) -/* #define sqliteHashKey(E) ((E)->pKey) // NOT USED */ -/* #define sqliteHashKeysize(E) ((E)->nKey) // NOT USED */ - -/* -** Number of entries in a hash table -*/ -/* #define sqliteHashCount(H) ((H)->count) // NOT USED */ - -#endif /* _SQLITE_HASH_H_ */ - -/************** End of hash.h ************************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ -/************** Include parse.h in the middle of sqliteInt.h *****************/ -/************** Begin file parse.h *******************************************/ -#define TK_SEMI 1 -#define TK_EXPLAIN 2 -#define TK_QUERY 3 -#define TK_PLAN 4 -#define TK_BEGIN 5 -#define TK_TRANSACTION 6 -#define TK_DEFERRED 7 -#define TK_IMMEDIATE 8 -#define TK_EXCLUSIVE 9 -#define TK_COMMIT 10 -#define TK_END 11 -#define TK_ROLLBACK 12 -#define TK_SAVEPOINT 13 -#define TK_RELEASE 14 -#define TK_TO 15 -#define TK_TABLE 16 -#define TK_CREATE 17 -#define TK_IF 18 -#define TK_NOT 19 -#define TK_EXISTS 20 -#define TK_TEMP 21 -#define TK_LP 22 -#define TK_RP 23 -#define TK_AS 24 -#define TK_COMMA 25 -#define TK_ID 26 -#define TK_INDEXED 27 -#define TK_ABORT 28 -#define TK_ACTION 29 -#define TK_AFTER 30 -#define TK_ANALYZE 31 -#define TK_ASC 32 -#define TK_ATTACH 33 -#define TK_BEFORE 34 -#define TK_BY 35 -#define TK_CASCADE 36 -#define TK_CAST 37 -#define TK_COLUMNKW 38 -#define TK_CONFLICT 39 -#define TK_DATABASE 40 -#define TK_DESC 41 -#define TK_DETACH 42 -#define TK_EACH 43 -#define TK_FAIL 44 -#define TK_FOR 45 -#define TK_IGNORE 46 -#define TK_INITIALLY 47 -#define TK_INSTEAD 48 -#define TK_LIKE_KW 49 -#define TK_MATCH 50 -#define TK_NO 51 -#define TK_KEY 52 -#define TK_OF 53 -#define TK_OFFSET 54 -#define TK_PRAGMA 55 -#define TK_RAISE 56 -#define TK_REPLACE 57 -#define TK_RESTRICT 58 -#define TK_ROW 59 -#define TK_TRIGGER 60 -#define TK_VACUUM 61 -#define TK_VIEW 62 -#define TK_VIRTUAL 63 -#define TK_REINDEX 64 -#define TK_RENAME 65 -#define TK_CTIME_KW 66 -#define TK_ANY 67 -#define TK_OR 68 -#define TK_AND 69 -#define TK_IS 70 -#define TK_BETWEEN 71 -#define TK_IN 72 -#define TK_ISNULL 73 -#define TK_NOTNULL 74 -#define TK_NE 75 -#define TK_EQ 76 -#define TK_GT 77 -#define TK_LE 78 -#define TK_LT 79 -#define TK_GE 80 -#define TK_ESCAPE 81 -#define TK_BITAND 82 -#define TK_BITOR 83 -#define TK_LSHIFT 84 -#define TK_RSHIFT 85 -#define TK_PLUS 86 -#define TK_MINUS 87 -#define TK_STAR 88 -#define TK_SLASH 89 -#define TK_REM 90 -#define TK_CONCAT 91 -#define TK_COLLATE 92 -#define TK_BITNOT 93 -#define TK_STRING 94 -#define TK_JOIN_KW 95 -#define TK_CONSTRAINT 96 -#define TK_DEFAULT 97 -#define TK_NULL 98 -#define TK_PRIMARY 99 -#define TK_UNIQUE 100 -#define TK_CHECK 101 -#define TK_REFERENCES 102 -#define TK_AUTOINCR 103 -#define TK_ON 104 -#define TK_INSERT 105 -#define TK_DELETE 106 -#define TK_UPDATE 107 -#define TK_SET 108 -#define TK_DEFERRABLE 109 -#define TK_FOREIGN 110 -#define TK_DROP 111 -#define TK_UNION 112 -#define TK_ALL 113 -#define TK_EXCEPT 114 -#define TK_INTERSECT 115 -#define TK_SELECT 116 -#define TK_DISTINCT 117 -#define TK_DOT 118 -#define TK_FROM 119 -#define TK_JOIN 120 -#define TK_USING 121 -#define TK_ORDER 122 -#define TK_GROUP 123 -#define TK_HAVING 124 -#define TK_LIMIT 125 -#define TK_WHERE 126 -#define TK_INTO 127 -#define TK_VALUES 128 -#define TK_INTEGER 129 -#define TK_FLOAT 130 -#define TK_BLOB 131 -#define TK_REGISTER 132 -#define TK_VARIABLE 133 -#define TK_CASE 134 -#define TK_WHEN 135 -#define TK_THEN 136 -#define TK_ELSE 137 -#define TK_INDEX 138 -#define TK_ALTER 139 -#define TK_ADD 140 -#define TK_TO_TEXT 141 -#define TK_TO_BLOB 142 -#define TK_TO_NUMERIC 143 -#define TK_TO_INT 144 -#define TK_TO_REAL 145 -#define TK_ISNOT 146 -#define TK_END_OF_FILE 147 -#define TK_ILLEGAL 148 -#define TK_SPACE 149 -#define TK_UNCLOSED_STRING 150 -#define TK_FUNCTION 151 -#define TK_COLUMN 152 -#define TK_AGG_FUNCTION 153 -#define TK_AGG_COLUMN 154 -#define TK_CONST_FUNC 155 -#define TK_UMINUS 156 -#define TK_UPLUS 157 - -/************** End of parse.h ***********************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ -#include -#include -#include -#include -#include - -/* -** If compiling for a processor that lacks floating point support, -** substitute integer for floating-point -*/ -#ifdef SQLITE_OMIT_FLOATING_POINT -# define double sqlite_int64 -# define LONGDOUBLE_TYPE sqlite_int64 -# ifndef SQLITE_BIG_DBL -# define SQLITE_BIG_DBL (((sqlite3_int64)1)<<50) -# endif -# define SQLITE_OMIT_DATETIME_FUNCS 1 -# define SQLITE_OMIT_TRACE 1 -# undef SQLITE_MIXED_ENDIAN_64BIT_FLOAT -# undef SQLITE_HAVE_ISNAN -#endif -#ifndef SQLITE_BIG_DBL -# define SQLITE_BIG_DBL (1e99) -#endif - -/* -** OMIT_TEMPDB is set to 1 if SQLITE_OMIT_TEMPDB is defined, or 0 -** afterward. Having this macro allows us to cause the C compiler -** to omit code used by TEMP tables without messy #ifndef statements. -*/ -#ifdef SQLITE_OMIT_TEMPDB -#define OMIT_TEMPDB 1 -#else -#define OMIT_TEMPDB 0 -#endif - -/* -** The "file format" number is an integer that is incremented whenever -** the VDBE-level file format changes. The following macros define the -** the default file format for new databases and the maximum file format -** that the library can read. -*/ -#define SQLITE_MAX_FILE_FORMAT 4 -#ifndef SQLITE_DEFAULT_FILE_FORMAT -# define SQLITE_DEFAULT_FILE_FORMAT 1 -#endif - -/* -** Determine whether triggers are recursive by default. This can be -** changed at run-time using a pragma. -*/ -#ifndef SQLITE_DEFAULT_RECURSIVE_TRIGGERS -# define SQLITE_DEFAULT_RECURSIVE_TRIGGERS 0 -#endif - -/* -** Provide a default value for SQLITE_TEMP_STORE in case it is not specified -** on the command-line -*/ -#ifndef SQLITE_TEMP_STORE -# define SQLITE_TEMP_STORE 1 -#endif - -/* -** GCC does not define the offsetof() macro so we'll have to do it -** ourselves. -*/ -#ifndef offsetof -#define offsetof(STRUCTURE,FIELD) ((int)((char*)&((STRUCTURE*)0)->FIELD)) -#endif - -/* -** Check to see if this machine uses EBCDIC. (Yes, believe it or -** not, there are still machines out there that use EBCDIC.) -*/ -#if 'A' == '\301' -# define SQLITE_EBCDIC 1 -#else -# define SQLITE_ASCII 1 -#endif - -/* -** Integers of known sizes. These typedefs might change for architectures -** where the sizes very. Preprocessor macros are available so that the -** types can be conveniently redefined at compile-type. Like this: -** -** cc '-DUINTPTR_TYPE=long long int' ... -*/ -#ifndef UINT32_TYPE -# ifdef HAVE_UINT32_T -# define UINT32_TYPE uint32_t -# else -# define UINT32_TYPE unsigned int -# endif -#endif -#ifndef UINT16_TYPE -# ifdef HAVE_UINT16_T -# define UINT16_TYPE uint16_t -# else -# define UINT16_TYPE unsigned short int -# endif -#endif -#ifndef INT16_TYPE -# ifdef HAVE_INT16_T -# define INT16_TYPE int16_t -# else -# define INT16_TYPE short int -# endif -#endif -#ifndef UINT8_TYPE -# ifdef HAVE_UINT8_T -# define UINT8_TYPE uint8_t -# else -# define UINT8_TYPE unsigned char -# endif -#endif -#ifndef INT8_TYPE -# ifdef HAVE_INT8_T -# define INT8_TYPE int8_t -# else -# define INT8_TYPE signed char -# endif -#endif -#ifndef LONGDOUBLE_TYPE -# define LONGDOUBLE_TYPE long double -#endif -typedef sqlite_int64 i64; /* 8-byte signed integer */ -typedef sqlite_uint64 u64; /* 8-byte unsigned integer */ -typedef UINT32_TYPE u32; /* 4-byte unsigned integer */ -typedef UINT16_TYPE u16; /* 2-byte unsigned integer */ -typedef INT16_TYPE i16; /* 2-byte signed integer */ -typedef UINT8_TYPE u8; /* 1-byte unsigned integer */ -typedef INT8_TYPE i8; /* 1-byte signed integer */ - -/* -** SQLITE_MAX_U32 is a u64 constant that is the maximum u64 value -** that can be stored in a u32 without loss of data. The value -** is 0x00000000ffffffff. But because of quirks of some compilers, we -** have to specify the value in the less intuitive manner shown: -*/ -#define SQLITE_MAX_U32 ((((u64)1)<<32)-1) - -/* -** Macros to determine whether the machine is big or little endian, -** evaluated at runtime. -*/ -#ifdef SQLITE_AMALGAMATION -SQLITE_PRIVATE const int sqlite3one = 1; -#else -SQLITE_PRIVATE const int sqlite3one; -#endif -#if defined(i386) || defined(__i386__) || defined(_M_IX86)\ - || defined(__x86_64) || defined(__x86_64__) -# define SQLITE_BIGENDIAN 0 -# define SQLITE_LITTLEENDIAN 1 -# define SQLITE_UTF16NATIVE SQLITE_UTF16LE -#else -# define SQLITE_BIGENDIAN (*(char *)(&sqlite3one)==0) -# define SQLITE_LITTLEENDIAN (*(char *)(&sqlite3one)==1) -# define SQLITE_UTF16NATIVE (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE) -#endif - -/* -** Constants for the largest and smallest possible 64-bit signed integers. -** These macros are designed to work correctly on both 32-bit and 64-bit -** compilers. -*/ -#define LARGEST_INT64 (0xffffffff|(((i64)0x7fffffff)<<32)) -#define SMALLEST_INT64 (((i64)-1) - LARGEST_INT64) - -/* -** Round up a number to the next larger multiple of 8. This is used -** to force 8-byte alignment on 64-bit architectures. -*/ -#define ROUND8(x) (((x)+7)&~7) - -/* -** Round down to the nearest multiple of 8 -*/ -#define ROUNDDOWN8(x) ((x)&~7) - -/* -** Assert that the pointer X is aligned to an 8-byte boundary. This -** macro is used only within assert() to verify that the code gets -** all alignment restrictions correct. -** -** Except, if SQLITE_4_BYTE_ALIGNED_MALLOC is defined, then the -** underlying malloc() implemention might return us 4-byte aligned -** pointers. In that case, only verify 4-byte alignment. -*/ -#ifdef SQLITE_4_BYTE_ALIGNED_MALLOC -# define EIGHT_BYTE_ALIGNMENT(X) ((((char*)(X) - (char*)0)&3)==0) -#else -# define EIGHT_BYTE_ALIGNMENT(X) ((((char*)(X) - (char*)0)&7)==0) -#endif - - -/* -** An instance of the following structure is used to store the busy-handler -** callback for a given sqlite handle. -** -** The sqlite.busyHandler member of the sqlite struct contains the busy -** callback for the database handle. Each pager opened via the sqlite -** handle is passed a pointer to sqlite.busyHandler. The busy-handler -** callback is currently invoked only from within pager.c. -*/ -typedef struct BusyHandler BusyHandler; -struct BusyHandler { - int (*xFunc)(void *,int); /* The busy callback */ - void *pArg; /* First arg to busy callback */ - int nBusy; /* Incremented with each busy call */ -}; - -/* -** Name of the master database table. The master database table -** is a special table that holds the names and attributes of all -** user tables and indices. -*/ -#define MASTER_NAME "sqlite_master" -#define TEMP_MASTER_NAME "sqlite_temp_master" - -/* -** The root-page of the master database table. -*/ -#define MASTER_ROOT 1 - -/* -** The name of the schema table. -*/ -#define SCHEMA_TABLE(x) ((!OMIT_TEMPDB)&&(x==1)?TEMP_MASTER_NAME:MASTER_NAME) - -/* -** A convenience macro that returns the number of elements in -** an array. -*/ -#define ArraySize(X) ((int)(sizeof(X)/sizeof(X[0]))) - -/* -** The following value as a destructor means to use sqlite3DbFree(). -** This is an internal extension to SQLITE_STATIC and SQLITE_TRANSIENT. -*/ -#define SQLITE_DYNAMIC ((sqlite3_destructor_type)sqlite3DbFree) - -/* -** When SQLITE_OMIT_WSD is defined, it means that the target platform does -** not support Writable Static Data (WSD) such as global and static variables. -** All variables must either be on the stack or dynamically allocated from -** the heap. When WSD is unsupported, the variable declarations scattered -** throughout the SQLite code must become constants instead. The SQLITE_WSD -** macro is used for this purpose. And instead of referencing the variable -** directly, we use its constant as a key to lookup the run-time allocated -** buffer that holds real variable. The constant is also the initializer -** for the run-time allocated buffer. -** -** In the usual case where WSD is supported, the SQLITE_WSD and GLOBAL -** macros become no-ops and have zero performance impact. -*/ -#ifdef SQLITE_OMIT_WSD - #define SQLITE_WSD const - #define GLOBAL(t,v) (*(t*)sqlite3_wsd_find((void*)&(v), sizeof(v))) - #define sqlite3GlobalConfig GLOBAL(struct Sqlite3Config, sqlite3Config) -SQLITE_API int sqlite3_wsd_init(int N, int J); -SQLITE_API void *sqlite3_wsd_find(void *K, int L); -#else - #define SQLITE_WSD - #define GLOBAL(t,v) v - #define sqlite3GlobalConfig sqlite3Config -#endif - -/* -** The following macros are used to suppress compiler warnings and to -** make it clear to human readers when a function parameter is deliberately -** left unused within the body of a function. This usually happens when -** a function is called via a function pointer. For example the -** implementation of an SQL aggregate step callback may not use the -** parameter indicating the number of arguments passed to the aggregate, -** if it knows that this is enforced elsewhere. -** -** When a function parameter is not used at all within the body of a function, -** it is generally named "NotUsed" or "NotUsed2" to make things even clearer. -** However, these macros may also be used to suppress warnings related to -** parameters that may or may not be used depending on compilation options. -** For example those parameters only used in assert() statements. In these -** cases the parameters are named as per the usual conventions. -*/ -#define UNUSED_PARAMETER(x) (void)(x) -#define UNUSED_PARAMETER2(x,y) UNUSED_PARAMETER(x),UNUSED_PARAMETER(y) - -/* -** Forward references to structures -*/ -typedef struct AggInfo AggInfo; -typedef struct AuthContext AuthContext; -typedef struct AutoincInfo AutoincInfo; -typedef struct Bitvec Bitvec; -typedef struct CollSeq CollSeq; -typedef struct Column Column; -typedef struct Db Db; -typedef struct Schema Schema; -typedef struct Expr Expr; -typedef struct ExprList ExprList; -typedef struct ExprSpan ExprSpan; -typedef struct FKey FKey; -typedef struct FuncDef FuncDef; -typedef struct FuncDefHash FuncDefHash; -typedef struct IdList IdList; -typedef struct Index Index; -typedef struct IndexSample IndexSample; -typedef struct KeyClass KeyClass; -typedef struct KeyInfo KeyInfo; -typedef struct Lookaside Lookaside; -typedef struct LookasideSlot LookasideSlot; -typedef struct Module Module; -typedef struct NameContext NameContext; -typedef struct Parse Parse; -typedef struct RowSet RowSet; -typedef struct Savepoint Savepoint; -typedef struct Select Select; -typedef struct SrcList SrcList; -typedef struct StrAccum StrAccum; -typedef struct Table Table; -typedef struct TableLock TableLock; -typedef struct Token Token; -typedef struct Trigger Trigger; -typedef struct TriggerPrg TriggerPrg; -typedef struct TriggerStep TriggerStep; -typedef struct UnpackedRecord UnpackedRecord; -typedef struct VTable VTable; -typedef struct Walker Walker; -typedef struct WherePlan WherePlan; -typedef struct WhereInfo WhereInfo; -typedef struct WhereLevel WhereLevel; - -/* -** Defer sourcing vdbe.h and btree.h until after the "u8" and -** "BusyHandler" typedefs. vdbe.h also requires a few of the opaque -** pointer types (i.e. FuncDef) defined above. -*/ -/************** Include btree.h in the middle of sqliteInt.h *****************/ -/************** Begin file btree.h *******************************************/ -/* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This header file defines the interface that the sqlite B-Tree file -** subsystem. See comments in the source code for a detailed description -** of what each interface routine does. -*/ -#ifndef _BTREE_H_ -#define _BTREE_H_ - -/* TODO: This definition is just included so other modules compile. It -** needs to be revisited. -*/ -#define SQLITE_N_BTREE_META 10 - -/* -** If defined as non-zero, auto-vacuum is enabled by default. Otherwise -** it must be turned on for each database using "PRAGMA auto_vacuum = 1". -*/ -#ifndef SQLITE_DEFAULT_AUTOVACUUM - #define SQLITE_DEFAULT_AUTOVACUUM 0 -#endif - -#define BTREE_AUTOVACUUM_NONE 0 /* Do not do auto-vacuum */ -#define BTREE_AUTOVACUUM_FULL 1 /* Do full auto-vacuum */ -#define BTREE_AUTOVACUUM_INCR 2 /* Incremental vacuum */ - -/* -** Forward declarations of structure -*/ -typedef struct Btree Btree; -typedef struct BtCursor BtCursor; -typedef struct BtShared BtShared; -typedef struct BtreeMutexArray BtreeMutexArray; - -/* -** This structure records all of the Btrees that need to hold -** a mutex before we enter sqlite3VdbeExec(). The Btrees are -** are placed in aBtree[] in order of aBtree[]->pBt. That way, -** we can always lock and unlock them all quickly. -*/ -struct BtreeMutexArray { - int nMutex; - Btree *aBtree[SQLITE_MAX_ATTACHED+1]; -}; - - -SQLITE_PRIVATE int sqlite3BtreeOpen( - const char *zFilename, /* Name of database file to open */ - sqlite3 *db, /* Associated database connection */ - Btree **ppBtree, /* Return open Btree* here */ - int flags, /* Flags */ - int vfsFlags /* Flags passed through to VFS open */ -); - -/* The flags parameter to sqlite3BtreeOpen can be the bitwise or of the -** following values. -** -** NOTE: These values must match the corresponding PAGER_ values in -** pager.h. -*/ -#define BTREE_OMIT_JOURNAL 1 /* Do not use journal. No argument */ -#define BTREE_NO_READLOCK 2 /* Omit readlocks on readonly files */ -#define BTREE_MEMORY 4 /* In-memory DB. No argument */ -#define BTREE_READONLY 8 /* Open the database in read-only mode */ -#define BTREE_READWRITE 16 /* Open for both reading and writing */ -#define BTREE_CREATE 32 /* Create the database if it does not exist */ - -SQLITE_PRIVATE int sqlite3BtreeClose(Btree*); -SQLITE_PRIVATE int sqlite3BtreeSetCacheSize(Btree*,int); -SQLITE_PRIVATE int sqlite3BtreeSetSafetyLevel(Btree*,int,int); -SQLITE_PRIVATE int sqlite3BtreeSyncDisabled(Btree*); -SQLITE_PRIVATE int sqlite3BtreeSetPageSize(Btree *p, int nPagesize, int nReserve, int eFix); -SQLITE_PRIVATE int sqlite3BtreeGetPageSize(Btree*); -SQLITE_PRIVATE int sqlite3BtreeMaxPageCount(Btree*,int); -SQLITE_PRIVATE int sqlite3BtreeSecureDelete(Btree*,int); -SQLITE_PRIVATE int sqlite3BtreeGetReserve(Btree*); -SQLITE_PRIVATE int sqlite3BtreeSetAutoVacuum(Btree *, int); -SQLITE_PRIVATE int sqlite3BtreeGetAutoVacuum(Btree *); -SQLITE_PRIVATE int sqlite3BtreeBeginTrans(Btree*,int); -SQLITE_PRIVATE int sqlite3BtreeCommitPhaseOne(Btree*, const char *zMaster); -SQLITE_PRIVATE int sqlite3BtreeCommitPhaseTwo(Btree*); -SQLITE_PRIVATE int sqlite3BtreeCommit(Btree*); -SQLITE_PRIVATE int sqlite3BtreeRollback(Btree*); -SQLITE_PRIVATE int sqlite3BtreeBeginStmt(Btree*,int); -SQLITE_PRIVATE int sqlite3BtreeCreateTable(Btree*, int*, int flags); -SQLITE_PRIVATE int sqlite3BtreeIsInTrans(Btree*); -SQLITE_PRIVATE int sqlite3BtreeIsInReadTrans(Btree*); -SQLITE_PRIVATE int sqlite3BtreeIsInBackup(Btree*); -SQLITE_PRIVATE void *sqlite3BtreeSchema(Btree *, int, void(*)(void *)); -SQLITE_PRIVATE int sqlite3BtreeSchemaLocked(Btree *pBtree); -SQLITE_PRIVATE int sqlite3BtreeLockTable(Btree *pBtree, int iTab, u8 isWriteLock); -SQLITE_PRIVATE int sqlite3BtreeSavepoint(Btree *, int, int); - -SQLITE_PRIVATE const char *sqlite3BtreeGetFilename(Btree *); -SQLITE_PRIVATE const char *sqlite3BtreeGetJournalname(Btree *); -SQLITE_PRIVATE int sqlite3BtreeCopyFile(Btree *, Btree *); - -SQLITE_PRIVATE int sqlite3BtreeIncrVacuum(Btree *); - -/* The flags parameter to sqlite3BtreeCreateTable can be the bitwise OR -** of the following flags: -*/ -#define BTREE_INTKEY 1 /* Table has only 64-bit signed integer keys */ -#define BTREE_ZERODATA 2 /* Table has keys only - no data */ -#define BTREE_LEAFDATA 4 /* Data stored in leaves only. Implies INTKEY */ - -SQLITE_PRIVATE int sqlite3BtreeDropTable(Btree*, int, int*); -SQLITE_PRIVATE int sqlite3BtreeClearTable(Btree*, int, int*); -SQLITE_PRIVATE void sqlite3BtreeTripAllCursors(Btree*, int); - -SQLITE_PRIVATE void sqlite3BtreeGetMeta(Btree *pBtree, int idx, u32 *pValue); -SQLITE_PRIVATE int sqlite3BtreeUpdateMeta(Btree*, int idx, u32 value); - -/* -** The second parameter to sqlite3BtreeGetMeta or sqlite3BtreeUpdateMeta -** should be one of the following values. The integer values are assigned -** to constants so that the offset of the corresponding field in an -** SQLite database header may be found using the following formula: -** -** offset = 36 + (idx * 4) -** -** For example, the free-page-count field is located at byte offset 36 of -** the database file header. The incr-vacuum-flag field is located at -** byte offset 64 (== 36+4*7). -*/ -#define BTREE_FREE_PAGE_COUNT 0 -#define BTREE_SCHEMA_VERSION 1 -#define BTREE_FILE_FORMAT 2 -#define BTREE_DEFAULT_CACHE_SIZE 3 -#define BTREE_LARGEST_ROOT_PAGE 4 -#define BTREE_TEXT_ENCODING 5 -#define BTREE_USER_VERSION 6 -#define BTREE_INCR_VACUUM 7 - -SQLITE_PRIVATE int sqlite3BtreeCursor( - Btree*, /* BTree containing table to open */ - int iTable, /* Index of root page */ - int wrFlag, /* 1 for writing. 0 for read-only */ - struct KeyInfo*, /* First argument to compare function */ - BtCursor *pCursor /* Space to write cursor structure */ -); -SQLITE_PRIVATE int sqlite3BtreeCursorSize(void); -SQLITE_PRIVATE void sqlite3BtreeCursorZero(BtCursor*); - -SQLITE_PRIVATE int sqlite3BtreeCloseCursor(BtCursor*); -SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked( - BtCursor*, - UnpackedRecord *pUnKey, - i64 intKey, - int bias, - int *pRes -); -SQLITE_PRIVATE int sqlite3BtreeCursorHasMoved(BtCursor*, int*); -SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor*); -SQLITE_PRIVATE int sqlite3BtreeInsert(BtCursor*, const void *pKey, i64 nKey, - const void *pData, int nData, - int nZero, int bias, int seekResult); -SQLITE_PRIVATE int sqlite3BtreeFirst(BtCursor*, int *pRes); -SQLITE_PRIVATE int sqlite3BtreeLast(BtCursor*, int *pRes); -SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor*, int *pRes); -SQLITE_PRIVATE int sqlite3BtreeEof(BtCursor*); -SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor*, int *pRes); -SQLITE_PRIVATE int sqlite3BtreeKeySize(BtCursor*, i64 *pSize); -SQLITE_PRIVATE int sqlite3BtreeKey(BtCursor*, u32 offset, u32 amt, void*); -SQLITE_PRIVATE const void *sqlite3BtreeKeyFetch(BtCursor*, int *pAmt); -SQLITE_PRIVATE const void *sqlite3BtreeDataFetch(BtCursor*, int *pAmt); -SQLITE_PRIVATE int sqlite3BtreeDataSize(BtCursor*, u32 *pSize); -SQLITE_PRIVATE int sqlite3BtreeData(BtCursor*, u32 offset, u32 amt, void*); -SQLITE_PRIVATE void sqlite3BtreeSetCachedRowid(BtCursor*, sqlite3_int64); -SQLITE_PRIVATE sqlite3_int64 sqlite3BtreeGetCachedRowid(BtCursor*); - -SQLITE_PRIVATE char *sqlite3BtreeIntegrityCheck(Btree*, int *aRoot, int nRoot, int, int*); -SQLITE_PRIVATE struct Pager *sqlite3BtreePager(Btree*); - -SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor*, u32 offset, u32 amt, void*); -SQLITE_PRIVATE void sqlite3BtreeCacheOverflow(BtCursor *); -SQLITE_PRIVATE void sqlite3BtreeClearCursor(BtCursor *); - -#ifndef NDEBUG -SQLITE_PRIVATE int sqlite3BtreeCursorIsValid(BtCursor*); -#endif - -#ifndef SQLITE_OMIT_BTREECOUNT -SQLITE_PRIVATE int sqlite3BtreeCount(BtCursor *, i64 *); -#endif - -#ifdef SQLITE_TEST -SQLITE_PRIVATE int sqlite3BtreeCursorInfo(BtCursor*, int*, int); -SQLITE_PRIVATE void sqlite3BtreeCursorList(Btree*); -#endif - -/* -** If we are not using shared cache, then there is no need to -** use mutexes to access the BtShared structures. So make the -** Enter and Leave procedures no-ops. -*/ -#ifndef SQLITE_OMIT_SHARED_CACHE -SQLITE_PRIVATE void sqlite3BtreeEnter(Btree*); -SQLITE_PRIVATE void sqlite3BtreeEnterAll(sqlite3*); -#else -# define sqlite3BtreeEnter(X) -# define sqlite3BtreeEnterAll(X) -#endif - -#if !defined(SQLITE_OMIT_SHARED_CACHE) && SQLITE_THREADSAFE -SQLITE_PRIVATE void sqlite3BtreeLeave(Btree*); -SQLITE_PRIVATE void sqlite3BtreeEnterCursor(BtCursor*); -SQLITE_PRIVATE void sqlite3BtreeLeaveCursor(BtCursor*); -SQLITE_PRIVATE void sqlite3BtreeLeaveAll(sqlite3*); -SQLITE_PRIVATE void sqlite3BtreeMutexArrayEnter(BtreeMutexArray*); -SQLITE_PRIVATE void sqlite3BtreeMutexArrayLeave(BtreeMutexArray*); -SQLITE_PRIVATE void sqlite3BtreeMutexArrayInsert(BtreeMutexArray*, Btree*); -#ifndef NDEBUG - /* These routines are used inside assert() statements only. */ -SQLITE_PRIVATE int sqlite3BtreeHoldsMutex(Btree*); -SQLITE_PRIVATE int sqlite3BtreeHoldsAllMutexes(sqlite3*); -#endif -#else - -# define sqlite3BtreeLeave(X) -# define sqlite3BtreeEnterCursor(X) -# define sqlite3BtreeLeaveCursor(X) -# define sqlite3BtreeLeaveAll(X) -# define sqlite3BtreeMutexArrayEnter(X) -# define sqlite3BtreeMutexArrayLeave(X) -# define sqlite3BtreeMutexArrayInsert(X,Y) - -# define sqlite3BtreeHoldsMutex(X) 1 -# define sqlite3BtreeHoldsAllMutexes(X) 1 -#endif - - -#endif /* _BTREE_H_ */ - -/************** End of btree.h ***********************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ -/************** Include vdbe.h in the middle of sqliteInt.h ******************/ -/************** Begin file vdbe.h ********************************************/ -/* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** Header file for the Virtual DataBase Engine (VDBE) -** -** This header defines the interface to the virtual database engine -** or VDBE. The VDBE implements an abstract machine that runs a -** simple program to access and modify the underlying database. -*/ -#ifndef _SQLITE_VDBE_H_ -#define _SQLITE_VDBE_H_ - -/* -** A single VDBE is an opaque structure named "Vdbe". Only routines -** in the source file sqliteVdbe.c are allowed to see the insides -** of this structure. -*/ -typedef struct Vdbe Vdbe; - -/* -** The names of the following types declared in vdbeInt.h are required -** for the VdbeOp definition. -*/ -typedef struct VdbeFunc VdbeFunc; -typedef struct Mem Mem; -typedef struct SubProgram SubProgram; - -/* -** A single instruction of the virtual machine has an opcode -** and as many as three operands. The instruction is recorded -** as an instance of the following structure: -*/ -struct VdbeOp { - u8 opcode; /* What operation to perform */ - signed char p4type; /* One of the P4_xxx constants for p4 */ - u8 opflags; /* Mask of the OPFLG_* flags in opcodes.h */ - u8 p5; /* Fifth parameter is an unsigned character */ - int p1; /* First operand */ - int p2; /* Second parameter (often the jump destination) */ - int p3; /* The third parameter */ - union { /* fourth parameter */ - int i; /* Integer value if p4type==P4_INT32 */ - void *p; /* Generic pointer */ - char *z; /* Pointer to data for string (char array) types */ - i64 *pI64; /* Used when p4type is P4_INT64 */ - double *pReal; /* Used when p4type is P4_REAL */ - FuncDef *pFunc; /* Used when p4type is P4_FUNCDEF */ - VdbeFunc *pVdbeFunc; /* Used when p4type is P4_VDBEFUNC */ - CollSeq *pColl; /* Used when p4type is P4_COLLSEQ */ - Mem *pMem; /* Used when p4type is P4_MEM */ - VTable *pVtab; /* Used when p4type is P4_VTAB */ - KeyInfo *pKeyInfo; /* Used when p4type is P4_KEYINFO */ - int *ai; /* Used when p4type is P4_INTARRAY */ - SubProgram *pProgram; /* Used when p4type is P4_SUBPROGRAM */ - } p4; -#ifdef SQLITE_DEBUG - char *zComment; /* Comment to improve readability */ -#endif -#ifdef VDBE_PROFILE - int cnt; /* Number of times this instruction was executed */ - u64 cycles; /* Total time spent executing this instruction */ -#endif -}; -typedef struct VdbeOp VdbeOp; - - -/* -** A sub-routine used to implement a trigger program. -*/ -struct SubProgram { - VdbeOp *aOp; /* Array of opcodes for sub-program */ - int nOp; /* Elements in aOp[] */ - int nMem; /* Number of memory cells required */ - int nCsr; /* Number of cursors required */ - int nRef; /* Number of pointers to this structure */ - void *token; /* id that may be used to recursive triggers */ -}; - -/* -** A smaller version of VdbeOp used for the VdbeAddOpList() function because -** it takes up less space. -*/ -struct VdbeOpList { - u8 opcode; /* What operation to perform */ - signed char p1; /* First operand */ - signed char p2; /* Second parameter (often the jump destination) */ - signed char p3; /* Third parameter */ -}; -typedef struct VdbeOpList VdbeOpList; - -/* -** Allowed values of VdbeOp.p4type -*/ -#define P4_NOTUSED 0 /* The P4 parameter is not used */ -#define P4_DYNAMIC (-1) /* Pointer to a string obtained from sqliteMalloc() */ -#define P4_STATIC (-2) /* Pointer to a static string */ -#define P4_COLLSEQ (-4) /* P4 is a pointer to a CollSeq structure */ -#define P4_FUNCDEF (-5) /* P4 is a pointer to a FuncDef structure */ -#define P4_KEYINFO (-6) /* P4 is a pointer to a KeyInfo structure */ -#define P4_VDBEFUNC (-7) /* P4 is a pointer to a VdbeFunc structure */ -#define P4_MEM (-8) /* P4 is a pointer to a Mem* structure */ -#define P4_TRANSIENT (-9) /* P4 is a pointer to a transient string */ -#define P4_VTAB (-10) /* P4 is a pointer to an sqlite3_vtab structure */ -#define P4_MPRINTF (-11) /* P4 is a string obtained from sqlite3_mprintf() */ -#define P4_REAL (-12) /* P4 is a 64-bit floating point value */ -#define P4_INT64 (-13) /* P4 is a 64-bit signed integer */ -#define P4_INT32 (-14) /* P4 is a 32-bit signed integer */ -#define P4_INTARRAY (-15) /* P4 is a vector of 32-bit integers */ -#define P4_SUBPROGRAM (-18) /* P4 is a pointer to a SubProgram structure */ - -/* When adding a P4 argument using P4_KEYINFO, a copy of the KeyInfo structure -** is made. That copy is freed when the Vdbe is finalized. But if the -** argument is P4_KEYINFO_HANDOFF, the passed in pointer is used. It still -** gets freed when the Vdbe is finalized so it still should be obtained -** from a single sqliteMalloc(). But no copy is made and the calling -** function should *not* try to free the KeyInfo. -*/ -#define P4_KEYINFO_HANDOFF (-16) -#define P4_KEYINFO_STATIC (-17) - -/* -** The Vdbe.aColName array contains 5n Mem structures, where n is the -** number of columns of data returned by the statement. -*/ -#define COLNAME_NAME 0 -#define COLNAME_DECLTYPE 1 -#define COLNAME_DATABASE 2 -#define COLNAME_TABLE 3 -#define COLNAME_COLUMN 4 -#ifdef SQLITE_ENABLE_COLUMN_METADATA -# define COLNAME_N 5 /* Number of COLNAME_xxx symbols */ -#else -# ifdef SQLITE_OMIT_DECLTYPE -# define COLNAME_N 1 /* Store only the name */ -# else -# define COLNAME_N 2 /* Store the name and decltype */ -# endif -#endif - -/* -** The following macro converts a relative address in the p2 field -** of a VdbeOp structure into a negative number so that -** sqlite3VdbeAddOpList() knows that the address is relative. Calling -** the macro again restores the address. -*/ -#define ADDR(X) (-1-(X)) - -/* -** The makefile scans the vdbe.c source file and creates the "opcodes.h" -** header file that defines a number for each opcode used by the VDBE. -*/ -/************** Include opcodes.h in the middle of vdbe.h ********************/ -/************** Begin file opcodes.h *****************************************/ -/* Automatically generated. Do not edit */ -/* See the mkopcodeh.awk script for details */ -#define OP_Goto 1 -#define OP_Gosub 2 -#define OP_Return 3 -#define OP_Yield 4 -#define OP_HaltIfNull 5 -#define OP_Halt 6 -#define OP_Integer 7 -#define OP_Int64 8 -#define OP_Real 130 /* same as TK_FLOAT */ -#define OP_String8 94 /* same as TK_STRING */ -#define OP_String 9 -#define OP_Null 10 -#define OP_Blob 11 -#define OP_Variable 12 -#define OP_Move 13 -#define OP_Copy 14 -#define OP_SCopy 15 -#define OP_ResultRow 16 -#define OP_Concat 91 /* same as TK_CONCAT */ -#define OP_Add 86 /* same as TK_PLUS */ -#define OP_Subtract 87 /* same as TK_MINUS */ -#define OP_Multiply 88 /* same as TK_STAR */ -#define OP_Divide 89 /* same as TK_SLASH */ -#define OP_Remainder 90 /* same as TK_REM */ -#define OP_CollSeq 17 -#define OP_Function 18 -#define OP_BitAnd 82 /* same as TK_BITAND */ -#define OP_BitOr 83 /* same as TK_BITOR */ -#define OP_ShiftLeft 84 /* same as TK_LSHIFT */ -#define OP_ShiftRight 85 /* same as TK_RSHIFT */ -#define OP_AddImm 20 -#define OP_MustBeInt 21 -#define OP_RealAffinity 22 -#define OP_ToText 141 /* same as TK_TO_TEXT */ -#define OP_ToBlob 142 /* same as TK_TO_BLOB */ -#define OP_ToNumeric 143 /* same as TK_TO_NUMERIC*/ -#define OP_ToInt 144 /* same as TK_TO_INT */ -#define OP_ToReal 145 /* same as TK_TO_REAL */ -#define OP_Eq 76 /* same as TK_EQ */ -#define OP_Ne 75 /* same as TK_NE */ -#define OP_Lt 79 /* same as TK_LT */ -#define OP_Le 78 /* same as TK_LE */ -#define OP_Gt 77 /* same as TK_GT */ -#define OP_Ge 80 /* same as TK_GE */ -#define OP_Permutation 23 -#define OP_Compare 24 -#define OP_Jump 25 -#define OP_And 69 /* same as TK_AND */ -#define OP_Or 68 /* same as TK_OR */ -#define OP_Not 19 /* same as TK_NOT */ -#define OP_BitNot 93 /* same as TK_BITNOT */ -#define OP_If 26 -#define OP_IfNot 27 -#define OP_IsNull 73 /* same as TK_ISNULL */ -#define OP_NotNull 74 /* same as TK_NOTNULL */ -#define OP_Column 28 -#define OP_Affinity 29 -#define OP_MakeRecord 30 -#define OP_Count 31 -#define OP_Savepoint 32 -#define OP_AutoCommit 33 -#define OP_Transaction 34 -#define OP_ReadCookie 35 -#define OP_SetCookie 36 -#define OP_VerifyCookie 37 -#define OP_OpenRead 38 -#define OP_OpenWrite 39 -#define OP_OpenEphemeral 40 -#define OP_OpenPseudo 41 -#define OP_Close 42 -#define OP_SeekLt 43 -#define OP_SeekLe 44 -#define OP_SeekGe 45 -#define OP_SeekGt 46 -#define OP_Seek 47 -#define OP_NotFound 48 -#define OP_Found 49 -#define OP_IsUnique 50 -#define OP_NotExists 51 -#define OP_Sequence 52 -#define OP_NewRowid 53 -#define OP_Insert 54 -#define OP_InsertInt 55 -#define OP_Delete 56 -#define OP_ResetCount 57 -#define OP_RowKey 58 -#define OP_RowData 59 -#define OP_Rowid 60 -#define OP_NullRow 61 -#define OP_Last 62 -#define OP_Sort 63 -#define OP_Rewind 64 -#define OP_Prev 65 -#define OP_Next 66 -#define OP_IdxInsert 67 -#define OP_IdxDelete 70 -#define OP_IdxRowid 71 -#define OP_IdxLT 72 -#define OP_IdxGE 81 -#define OP_Destroy 92 -#define OP_Clear 95 -#define OP_CreateIndex 96 -#define OP_CreateTable 97 -#define OP_ParseSchema 98 -#define OP_LoadAnalysis 99 -#define OP_DropTable 100 -#define OP_DropIndex 101 -#define OP_DropTrigger 102 -#define OP_IntegrityCk 103 -#define OP_RowSetAdd 104 -#define OP_RowSetRead 105 -#define OP_RowSetTest 106 -#define OP_Program 107 -#define OP_Param 108 -#define OP_FkCounter 109 -#define OP_FkIfZero 110 -#define OP_MemMax 111 -#define OP_IfPos 112 -#define OP_IfNeg 113 -#define OP_IfZero 114 -#define OP_AggStep 115 -#define OP_AggFinal 116 -#define OP_Vacuum 117 -#define OP_IncrVacuum 118 -#define OP_Expire 119 -#define OP_TableLock 120 -#define OP_VBegin 121 -#define OP_VCreate 122 -#define OP_VDestroy 123 -#define OP_VOpen 124 -#define OP_VFilter 125 -#define OP_VColumn 126 -#define OP_VNext 127 -#define OP_VRename 128 -#define OP_VUpdate 129 -#define OP_Pagecount 131 -#define OP_Trace 132 -#define OP_Noop 133 -#define OP_Explain 134 - -/* The following opcode values are never used */ -#define OP_NotUsed_135 135 -#define OP_NotUsed_136 136 -#define OP_NotUsed_137 137 -#define OP_NotUsed_138 138 -#define OP_NotUsed_139 139 -#define OP_NotUsed_140 140 - - -/* Properties such as "out2" or "jump" that are specified in -** comments following the "case" for each opcode in the vdbe.c -** are encoded into bitvectors as follows: -*/ -#define OPFLG_JUMP 0x0001 /* jump: P2 holds jmp target */ -#define OPFLG_OUT2_PRERELEASE 0x0002 /* out2-prerelease: */ -#define OPFLG_IN1 0x0004 /* in1: P1 is an input */ -#define OPFLG_IN2 0x0008 /* in2: P2 is an input */ -#define OPFLG_IN3 0x0010 /* in3: P3 is an input */ -#define OPFLG_OUT2 0x0020 /* out2: P2 is an output */ -#define OPFLG_OUT3 0x0040 /* out3: P3 is an output */ -#define OPFLG_INITIALIZER {\ -/* 0 */ 0x00, 0x01, 0x05, 0x04, 0x04, 0x10, 0x00, 0x02,\ -/* 8 */ 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, 0x24, 0x24,\ -/* 16 */ 0x00, 0x00, 0x00, 0x24, 0x04, 0x05, 0x04, 0x00,\ -/* 24 */ 0x00, 0x01, 0x05, 0x05, 0x00, 0x00, 0x00, 0x02,\ -/* 32 */ 0x00, 0x00, 0x00, 0x02, 0x10, 0x00, 0x00, 0x00,\ -/* 40 */ 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x08,\ -/* 48 */ 0x11, 0x11, 0x11, 0x11, 0x02, 0x02, 0x00, 0x00,\ -/* 56 */ 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x01, 0x01,\ -/* 64 */ 0x01, 0x01, 0x01, 0x08, 0x4c, 0x4c, 0x00, 0x02,\ -/* 72 */ 0x01, 0x05, 0x05, 0x15, 0x15, 0x15, 0x15, 0x15,\ -/* 80 */ 0x15, 0x01, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c,\ -/* 88 */ 0x4c, 0x4c, 0x4c, 0x4c, 0x02, 0x24, 0x02, 0x00,\ -/* 96 */ 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ -/* 104 */ 0x0c, 0x45, 0x15, 0x01, 0x02, 0x00, 0x01, 0x08,\ -/* 112 */ 0x05, 0x05, 0x05, 0x00, 0x00, 0x00, 0x01, 0x00,\ -/* 120 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01,\ -/* 128 */ 0x00, 0x00, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00,\ -/* 136 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04,\ -/* 144 */ 0x04, 0x04,} - -/************** End of opcodes.h *********************************************/ -/************** Continuing where we left off in vdbe.h ***********************/ - -/* -** Prototypes for the VDBE interface. See comments on the implementation -** for a description of what each of these routines does. -*/ -SQLITE_PRIVATE Vdbe *sqlite3VdbeCreate(sqlite3*); -SQLITE_PRIVATE int sqlite3VdbeAddOp0(Vdbe*,int); -SQLITE_PRIVATE int sqlite3VdbeAddOp1(Vdbe*,int,int); -SQLITE_PRIVATE int sqlite3VdbeAddOp2(Vdbe*,int,int,int); -SQLITE_PRIVATE int sqlite3VdbeAddOp3(Vdbe*,int,int,int,int); -SQLITE_PRIVATE int sqlite3VdbeAddOp4(Vdbe*,int,int,int,int,const char *zP4,int); -SQLITE_PRIVATE int sqlite3VdbeAddOp4Int(Vdbe*,int,int,int,int,int); -SQLITE_PRIVATE int sqlite3VdbeAddOpList(Vdbe*, int nOp, VdbeOpList const *aOp); -SQLITE_PRIVATE void sqlite3VdbeChangeP1(Vdbe*, int addr, int P1); -SQLITE_PRIVATE void sqlite3VdbeChangeP2(Vdbe*, int addr, int P2); -SQLITE_PRIVATE void sqlite3VdbeChangeP3(Vdbe*, int addr, int P3); -SQLITE_PRIVATE void sqlite3VdbeChangeP5(Vdbe*, u8 P5); -SQLITE_PRIVATE void sqlite3VdbeJumpHere(Vdbe*, int addr); -SQLITE_PRIVATE void sqlite3VdbeChangeToNoop(Vdbe*, int addr, int N); -SQLITE_PRIVATE void sqlite3VdbeChangeP4(Vdbe*, int addr, const char *zP4, int N); -SQLITE_PRIVATE void sqlite3VdbeUsesBtree(Vdbe*, int); -SQLITE_PRIVATE VdbeOp *sqlite3VdbeGetOp(Vdbe*, int); -SQLITE_PRIVATE int sqlite3VdbeMakeLabel(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeRunOnlyOnce(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeDelete(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeMakeReady(Vdbe*,int,int,int,int,int,int); -SQLITE_PRIVATE int sqlite3VdbeFinalize(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeResolveLabel(Vdbe*, int); -SQLITE_PRIVATE int sqlite3VdbeCurrentAddr(Vdbe*); -#ifdef SQLITE_DEBUG -SQLITE_PRIVATE int sqlite3VdbeAssertMayAbort(Vdbe *, int); -SQLITE_PRIVATE void sqlite3VdbeTrace(Vdbe*,FILE*); -#endif -SQLITE_PRIVATE void sqlite3VdbeResetStepResult(Vdbe*); -SQLITE_PRIVATE int sqlite3VdbeReset(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeSetNumCols(Vdbe*,int); -SQLITE_PRIVATE int sqlite3VdbeSetColName(Vdbe*, int, int, const char *, void(*)(void*)); -SQLITE_PRIVATE void sqlite3VdbeCountChanges(Vdbe*); -SQLITE_PRIVATE sqlite3 *sqlite3VdbeDb(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe*, const char *z, int n, int); -SQLITE_PRIVATE void sqlite3VdbeSwap(Vdbe*,Vdbe*); -SQLITE_PRIVATE VdbeOp *sqlite3VdbeTakeOpArray(Vdbe*, int*, int*); -SQLITE_PRIVATE void sqlite3VdbeProgramDelete(sqlite3 *, SubProgram *, int); -SQLITE_PRIVATE sqlite3_value *sqlite3VdbeGetValue(Vdbe*, int, u8); -SQLITE_PRIVATE void sqlite3VdbeSetVarmask(Vdbe*, int); -#ifndef SQLITE_OMIT_TRACE -SQLITE_PRIVATE char *sqlite3VdbeExpandSql(Vdbe*, const char*); -#endif - -SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeRecordUnpack(KeyInfo*,int,const void*,char*,int); -SQLITE_PRIVATE void sqlite3VdbeDeleteUnpackedRecord(UnpackedRecord*); -SQLITE_PRIVATE int sqlite3VdbeRecordCompare(int,const void*,UnpackedRecord*); - - -#ifndef NDEBUG -SQLITE_PRIVATE void sqlite3VdbeComment(Vdbe*, const char*, ...); -# define VdbeComment(X) sqlite3VdbeComment X -SQLITE_PRIVATE void sqlite3VdbeNoopComment(Vdbe*, const char*, ...); -# define VdbeNoopComment(X) sqlite3VdbeNoopComment X -#else -# define VdbeComment(X) -# define VdbeNoopComment(X) -#endif - -#endif - -/************** End of vdbe.h ************************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ -/************** Include pager.h in the middle of sqliteInt.h *****************/ -/************** Begin file pager.h *******************************************/ -/* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This header file defines the interface that the sqlite page cache -** subsystem. The page cache subsystem reads and writes a file a page -** at a time and provides a journal for rollback. -*/ - -#ifndef _PAGER_H_ -#define _PAGER_H_ - -/* -** Default maximum size for persistent journal files. A negative -** value means no limit. This value may be overridden using the -** sqlite3PagerJournalSizeLimit() API. See also "PRAGMA journal_size_limit". -*/ -#ifndef SQLITE_DEFAULT_JOURNAL_SIZE_LIMIT - #define SQLITE_DEFAULT_JOURNAL_SIZE_LIMIT -1 -#endif - -/* -** The type used to represent a page number. The first page in a file -** is called page 1. 0 is used to represent "not a page". -*/ -typedef u32 Pgno; - -/* -** Each open file is managed by a separate instance of the "Pager" structure. -*/ -typedef struct Pager Pager; - -/* -** Handle type for pages. -*/ -typedef struct PgHdr DbPage; - -/* -** Page number PAGER_MJ_PGNO is never used in an SQLite database (it is -** reserved for working around a windows/posix incompatibility). It is -** used in the journal to signify that the remainder of the journal file -** is devoted to storing a master journal name - there are no more pages to -** roll back. See comments for function writeMasterJournal() in pager.c -** for details. -*/ -#define PAGER_MJ_PGNO(x) ((Pgno)((PENDING_BYTE/((x)->pageSize))+1)) - -/* -** Allowed values for the flags parameter to sqlite3PagerOpen(). -** -** NOTE: These values must match the corresponding BTREE_ values in btree.h. -*/ -#define PAGER_OMIT_JOURNAL 0x0001 /* Do not use a rollback journal */ -#define PAGER_NO_READLOCK 0x0002 /* Omit readlocks on readonly files */ - -/* -** Valid values for the second argument to sqlite3PagerLockingMode(). -*/ -#define PAGER_LOCKINGMODE_QUERY -1 -#define PAGER_LOCKINGMODE_NORMAL 0 -#define PAGER_LOCKINGMODE_EXCLUSIVE 1 - -/* -** Valid values for the second argument to sqlite3PagerJournalMode(). -*/ -#define PAGER_JOURNALMODE_QUERY -1 -#define PAGER_JOURNALMODE_DELETE 0 /* Commit by deleting journal file */ -#define PAGER_JOURNALMODE_PERSIST 1 /* Commit by zeroing journal header */ -#define PAGER_JOURNALMODE_OFF 2 /* Journal omitted. */ -#define PAGER_JOURNALMODE_TRUNCATE 3 /* Commit by truncating journal */ -#define PAGER_JOURNALMODE_MEMORY 4 /* In-memory journal file */ - -/* -** The remainder of this file contains the declarations of the functions -** that make up the Pager sub-system API. See source code comments for -** a detailed description of each routine. -*/ - -/* Open and close a Pager connection. */ -SQLITE_PRIVATE int sqlite3PagerOpen( - sqlite3_vfs*, - Pager **ppPager, - const char*, - int, - int, - int, - void(*)(DbPage*) -); -SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager); -SQLITE_PRIVATE int sqlite3PagerReadFileheader(Pager*, int, unsigned char*); - -/* Functions used to configure a Pager object. */ -SQLITE_PRIVATE void sqlite3PagerSetBusyhandler(Pager*, int(*)(void *), void *); -SQLITE_PRIVATE int sqlite3PagerSetPagesize(Pager*, u16*, int); -SQLITE_PRIVATE int sqlite3PagerMaxPageCount(Pager*, int); -SQLITE_PRIVATE void sqlite3PagerSetCachesize(Pager*, int); -SQLITE_PRIVATE void sqlite3PagerSetSafetyLevel(Pager*,int,int); -SQLITE_PRIVATE int sqlite3PagerLockingMode(Pager *, int); -SQLITE_PRIVATE int sqlite3PagerJournalMode(Pager *, int); -SQLITE_PRIVATE i64 sqlite3PagerJournalSizeLimit(Pager *, i64); -SQLITE_PRIVATE sqlite3_backup **sqlite3PagerBackupPtr(Pager*); - -/* Functions used to obtain and release page references. */ -SQLITE_PRIVATE int sqlite3PagerAcquire(Pager *pPager, Pgno pgno, DbPage **ppPage, int clrFlag); -#define sqlite3PagerGet(A,B,C) sqlite3PagerAcquire(A,B,C,0) -SQLITE_PRIVATE DbPage *sqlite3PagerLookup(Pager *pPager, Pgno pgno); -SQLITE_PRIVATE void sqlite3PagerRef(DbPage*); -SQLITE_PRIVATE void sqlite3PagerUnref(DbPage*); - -/* Operations on page references. */ -SQLITE_PRIVATE int sqlite3PagerWrite(DbPage*); -SQLITE_PRIVATE void sqlite3PagerDontWrite(DbPage*); -SQLITE_PRIVATE int sqlite3PagerMovepage(Pager*,DbPage*,Pgno,int); -SQLITE_PRIVATE int sqlite3PagerPageRefcount(DbPage*); -SQLITE_PRIVATE void *sqlite3PagerGetData(DbPage *); -SQLITE_PRIVATE void *sqlite3PagerGetExtra(DbPage *); - -/* Functions used to manage pager transactions and savepoints. */ -SQLITE_PRIVATE int sqlite3PagerPagecount(Pager*, int*); -SQLITE_PRIVATE int sqlite3PagerBegin(Pager*, int exFlag, int); -SQLITE_PRIVATE int sqlite3PagerCommitPhaseOne(Pager*,const char *zMaster, int); -SQLITE_PRIVATE int sqlite3PagerSync(Pager *pPager); -SQLITE_PRIVATE int sqlite3PagerCommitPhaseTwo(Pager*); -SQLITE_PRIVATE int sqlite3PagerRollback(Pager*); -SQLITE_PRIVATE int sqlite3PagerOpenSavepoint(Pager *pPager, int n); -SQLITE_PRIVATE int sqlite3PagerSavepoint(Pager *pPager, int op, int iSavepoint); -SQLITE_PRIVATE int sqlite3PagerSharedLock(Pager *pPager); - -/* Functions used to query pager state and configuration. */ -SQLITE_PRIVATE u8 sqlite3PagerIsreadonly(Pager*); -SQLITE_PRIVATE int sqlite3PagerRefcount(Pager*); -SQLITE_PRIVATE const char *sqlite3PagerFilename(Pager*); -SQLITE_PRIVATE const sqlite3_vfs *sqlite3PagerVfs(Pager*); -SQLITE_PRIVATE sqlite3_file *sqlite3PagerFile(Pager*); -SQLITE_PRIVATE const char *sqlite3PagerJournalname(Pager*); -SQLITE_PRIVATE int sqlite3PagerNosync(Pager*); -SQLITE_PRIVATE void *sqlite3PagerTempSpace(Pager*); -SQLITE_PRIVATE int sqlite3PagerIsMemdb(Pager*); - -/* Functions used to truncate the database file. */ -SQLITE_PRIVATE void sqlite3PagerTruncateImage(Pager*,Pgno); - -/* Functions to support testing and debugging. */ -#if !defined(NDEBUG) || defined(SQLITE_TEST) -SQLITE_PRIVATE Pgno sqlite3PagerPagenumber(DbPage*); -SQLITE_PRIVATE int sqlite3PagerIswriteable(DbPage*); -#endif -#ifdef SQLITE_TEST -SQLITE_PRIVATE int *sqlite3PagerStats(Pager*); -SQLITE_PRIVATE void sqlite3PagerRefdump(Pager*); - void disable_simulated_io_errors(void); - void enable_simulated_io_errors(void); -#else -# define disable_simulated_io_errors() -# define enable_simulated_io_errors() -#endif - -#endif /* _PAGER_H_ */ - -/************** End of pager.h ***********************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ -/************** Include pcache.h in the middle of sqliteInt.h ****************/ -/************** Begin file pcache.h ******************************************/ -/* -** 2008 August 05 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This header file defines the interface that the sqlite page cache -** subsystem. -*/ - -#ifndef _PCACHE_H_ - -typedef struct PgHdr PgHdr; -typedef struct PCache PCache; - -/* -** Every page in the cache is controlled by an instance of the following -** structure. -*/ -struct PgHdr { - void *pData; /* Content of this page */ - void *pExtra; /* Extra content */ - PgHdr *pDirty; /* Transient list of dirty pages */ - Pgno pgno; /* Page number for this page */ - Pager *pPager; /* The pager this page is part of */ -#ifdef SQLITE_CHECK_PAGES - u32 pageHash; /* Hash of page content */ -#endif - u16 flags; /* PGHDR flags defined below */ - - /********************************************************************** - ** Elements above are public. All that follows is private to pcache.c - ** and should not be accessed by other modules. - */ - i16 nRef; /* Number of users of this page */ - PCache *pCache; /* Cache that owns this page */ - - PgHdr *pDirtyNext; /* Next element in list of dirty pages */ - PgHdr *pDirtyPrev; /* Previous element in list of dirty pages */ -}; - -/* Bit values for PgHdr.flags */ -#define PGHDR_DIRTY 0x002 /* Page has changed */ -#define PGHDR_NEED_SYNC 0x004 /* Fsync the rollback journal before - ** writing this page to the database */ -#define PGHDR_NEED_READ 0x008 /* Content is unread */ -#define PGHDR_REUSE_UNLIKELY 0x010 /* A hint that reuse is unlikely */ -#define PGHDR_DONT_WRITE 0x020 /* Do not write content to disk */ - -/* Initialize and shutdown the page cache subsystem */ -SQLITE_PRIVATE int sqlite3PcacheInitialize(void); -SQLITE_PRIVATE void sqlite3PcacheShutdown(void); - -/* Page cache buffer management: -** These routines implement SQLITE_CONFIG_PAGECACHE. -*/ -SQLITE_PRIVATE void sqlite3PCacheBufferSetup(void *, int sz, int n); - -/* Create a new pager cache. -** Under memory stress, invoke xStress to try to make pages clean. -** Only clean and unpinned pages can be reclaimed. -*/ -SQLITE_PRIVATE void sqlite3PcacheOpen( - int szPage, /* Size of every page */ - int szExtra, /* Extra space associated with each page */ - int bPurgeable, /* True if pages are on backing store */ - int (*xStress)(void*, PgHdr*), /* Call to try to make pages clean */ - void *pStress, /* Argument to xStress */ - PCache *pToInit /* Preallocated space for the PCache */ -); - -/* Modify the page-size after the cache has been created. */ -SQLITE_PRIVATE void sqlite3PcacheSetPageSize(PCache *, int); - -/* Return the size in bytes of a PCache object. Used to preallocate -** storage space. -*/ -SQLITE_PRIVATE int sqlite3PcacheSize(void); - -/* One release per successful fetch. Page is pinned until released. -** Reference counted. -*/ -SQLITE_PRIVATE int sqlite3PcacheFetch(PCache*, Pgno, int createFlag, PgHdr**); -SQLITE_PRIVATE void sqlite3PcacheRelease(PgHdr*); - -SQLITE_PRIVATE void sqlite3PcacheDrop(PgHdr*); /* Remove page from cache */ -SQLITE_PRIVATE void sqlite3PcacheMakeDirty(PgHdr*); /* Make sure page is marked dirty */ -SQLITE_PRIVATE void sqlite3PcacheMakeClean(PgHdr*); /* Mark a single page as clean */ -SQLITE_PRIVATE void sqlite3PcacheCleanAll(PCache*); /* Mark all dirty list pages as clean */ - -/* Change a page number. Used by incr-vacuum. */ -SQLITE_PRIVATE void sqlite3PcacheMove(PgHdr*, Pgno); - -/* Remove all pages with pgno>x. Reset the cache if x==0 */ -SQLITE_PRIVATE void sqlite3PcacheTruncate(PCache*, Pgno x); - -/* Get a list of all dirty pages in the cache, sorted by page number */ -SQLITE_PRIVATE PgHdr *sqlite3PcacheDirtyList(PCache*); - -/* Reset and close the cache object */ -SQLITE_PRIVATE void sqlite3PcacheClose(PCache*); - -/* Clear flags from pages of the page cache */ -SQLITE_PRIVATE void sqlite3PcacheClearSyncFlags(PCache *); - -/* Discard the contents of the cache */ -SQLITE_PRIVATE void sqlite3PcacheClear(PCache*); - -/* Return the total number of outstanding page references */ -SQLITE_PRIVATE int sqlite3PcacheRefCount(PCache*); - -/* Increment the reference count of an existing page */ -SQLITE_PRIVATE void sqlite3PcacheRef(PgHdr*); - -SQLITE_PRIVATE int sqlite3PcachePageRefcount(PgHdr*); - -/* Return the total number of pages stored in the cache */ -SQLITE_PRIVATE int sqlite3PcachePagecount(PCache*); - -#if defined(SQLITE_CHECK_PAGES) || defined(SQLITE_DEBUG) -/* Iterate through all dirty pages currently stored in the cache. This -** interface is only available if SQLITE_CHECK_PAGES is defined when the -** library is built. -*/ -SQLITE_PRIVATE void sqlite3PcacheIterateDirty(PCache *pCache, void (*xIter)(PgHdr *)); -#endif - -/* Set and get the suggested cache-size for the specified pager-cache. -** -** If no global maximum is configured, then the system attempts to limit -** the total number of pages cached by purgeable pager-caches to the sum -** of the suggested cache-sizes. -*/ -SQLITE_PRIVATE void sqlite3PcacheSetCachesize(PCache *, int); -#ifdef SQLITE_TEST -SQLITE_PRIVATE int sqlite3PcacheGetCachesize(PCache *); -#endif - -#ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT -/* Try to return memory used by the pcache module to the main memory heap */ -SQLITE_PRIVATE int sqlite3PcacheReleaseMemory(int); -#endif - -#ifdef SQLITE_TEST -SQLITE_PRIVATE void sqlite3PcacheStats(int*,int*,int*,int*); -#endif - -SQLITE_PRIVATE void sqlite3PCacheSetDefault(void); - -#endif /* _PCACHE_H_ */ - -/************** End of pcache.h **********************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ - -/************** Include os.h in the middle of sqliteInt.h ********************/ -/************** Begin file os.h **********************************************/ -/* -** 2001 September 16 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -****************************************************************************** -** -** This header file (together with is companion C source-code file -** "os.c") attempt to abstract the underlying operating system so that -** the SQLite library will work on both POSIX and windows systems. -** -** This header file is #include-ed by sqliteInt.h and thus ends up -** being included by every source file. -*/ -#ifndef _SQLITE_OS_H_ -#define _SQLITE_OS_H_ - -/* -** Figure out if we are dealing with Unix, Windows, or some other -** operating system. After the following block of preprocess macros, -** all of SQLITE_OS_UNIX, SQLITE_OS_WIN, SQLITE_OS_OS2, and SQLITE_OS_OTHER -** will defined to either 1 or 0. One of the four will be 1. The other -** three will be 0. -*/ -#if defined(SQLITE_OS_OTHER) -# if SQLITE_OS_OTHER==1 -# undef SQLITE_OS_UNIX -# define SQLITE_OS_UNIX 0 -# undef SQLITE_OS_WIN -# define SQLITE_OS_WIN 0 -# undef SQLITE_OS_OS2 -# define SQLITE_OS_OS2 0 -# else -# undef SQLITE_OS_OTHER -# endif -#endif -#if !defined(SQLITE_OS_UNIX) && !defined(SQLITE_OS_OTHER) -# define SQLITE_OS_OTHER 0 -# ifndef SQLITE_OS_WIN -# if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__) || defined(__MINGW32__) || defined(__BORLANDC__) -# define SQLITE_OS_WIN 1 -# define SQLITE_OS_UNIX 0 -# define SQLITE_OS_OS2 0 -# elif defined(__EMX__) || defined(_OS2) || defined(OS2) || defined(_OS2_) || defined(__OS2__) -# define SQLITE_OS_WIN 0 -# define SQLITE_OS_UNIX 0 -# define SQLITE_OS_OS2 1 -# else -# define SQLITE_OS_WIN 0 -# define SQLITE_OS_UNIX 1 -# define SQLITE_OS_OS2 0 -# endif -# else -# define SQLITE_OS_UNIX 0 -# define SQLITE_OS_OS2 0 -# endif -#else -# ifndef SQLITE_OS_WIN -# define SQLITE_OS_WIN 0 -# endif -#endif - -/* -** Determine if we are dealing with WindowsCE - which has a much -** reduced API. -*/ -#if defined(_WIN32_WCE) -# define SQLITE_OS_WINCE 1 -#else -# define SQLITE_OS_WINCE 0 -#endif - - -/* -** Define the maximum size of a temporary filename -*/ -#if SQLITE_OS_WIN -# include -# define SQLITE_TEMPNAME_SIZE (MAX_PATH+50) -#elif SQLITE_OS_OS2 -# if (__GNUC__ > 3 || __GNUC__ == 3 && __GNUC_MINOR__ >= 3) && defined(OS2_HIGH_MEMORY) -# include /* has to be included before os2.h for linking to work */ -# endif -# define INCL_DOSDATETIME -# define INCL_DOSFILEMGR -# define INCL_DOSERRORS -# define INCL_DOSMISC -# define INCL_DOSPROCESS -# define INCL_DOSMODULEMGR -# define INCL_DOSSEMAPHORES -# include -# include -# define SQLITE_TEMPNAME_SIZE (CCHMAXPATHCOMP) -#else -# define SQLITE_TEMPNAME_SIZE 200 -#endif - -/* If the SET_FULLSYNC macro is not defined above, then make it -** a no-op -*/ -#ifndef SET_FULLSYNC -# define SET_FULLSYNC(x,y) -#endif - -/* -** The default size of a disk sector -*/ -#ifndef SQLITE_DEFAULT_SECTOR_SIZE -# define SQLITE_DEFAULT_SECTOR_SIZE 512 -#endif - -/* -** Temporary files are named starting with this prefix followed by 16 random -** alphanumeric characters, and no file extension. They are stored in the -** OS's standard temporary file directory, and are deleted prior to exit. -** If sqlite is being embedded in another program, you may wish to change the -** prefix to reflect your program's name, so that if your program exits -** prematurely, old temporary files can be easily identified. This can be done -** using -DSQLITE_TEMP_FILE_PREFIX=myprefix_ on the compiler command line. -** -** 2006-10-31: The default prefix used to be "sqlite_". But then -** Mcafee started using SQLite in their anti-virus product and it -** started putting files with the "sqlite" name in the c:/temp folder. -** This annoyed many windows users. Those users would then do a -** Google search for "sqlite", find the telephone numbers of the -** developers and call to wake them up at night and complain. -** For this reason, the default name prefix is changed to be "sqlite" -** spelled backwards. So the temp files are still identified, but -** anybody smart enough to figure out the code is also likely smart -** enough to know that calling the developer will not help get rid -** of the file. -*/ -#ifndef SQLITE_TEMP_FILE_PREFIX -# define SQLITE_TEMP_FILE_PREFIX "etilqs_" -#endif - -/* -** The following values may be passed as the second argument to -** sqlite3OsLock(). The various locks exhibit the following semantics: -** -** SHARED: Any number of processes may hold a SHARED lock simultaneously. -** RESERVED: A single process may hold a RESERVED lock on a file at -** any time. Other processes may hold and obtain new SHARED locks. -** PENDING: A single process may hold a PENDING lock on a file at -** any one time. Existing SHARED locks may persist, but no new -** SHARED locks may be obtained by other processes. -** EXCLUSIVE: An EXCLUSIVE lock precludes all other locks. -** -** PENDING_LOCK may not be passed directly to sqlite3OsLock(). Instead, a -** process that requests an EXCLUSIVE lock may actually obtain a PENDING -** lock. This can be upgraded to an EXCLUSIVE lock by a subsequent call to -** sqlite3OsLock(). -*/ -#define NO_LOCK 0 -#define SHARED_LOCK 1 -#define RESERVED_LOCK 2 -#define PENDING_LOCK 3 -#define EXCLUSIVE_LOCK 4 - -/* -** File Locking Notes: (Mostly about windows but also some info for Unix) -** -** We cannot use LockFileEx() or UnlockFileEx() on Win95/98/ME because -** those functions are not available. So we use only LockFile() and -** UnlockFile(). -** -** LockFile() prevents not just writing but also reading by other processes. -** A SHARED_LOCK is obtained by locking a single randomly-chosen -** byte out of a specific range of bytes. The lock byte is obtained at -** random so two separate readers can probably access the file at the -** same time, unless they are unlucky and choose the same lock byte. -** An EXCLUSIVE_LOCK is obtained by locking all bytes in the range. -** There can only be one writer. A RESERVED_LOCK is obtained by locking -** a single byte of the file that is designated as the reserved lock byte. -** A PENDING_LOCK is obtained by locking a designated byte different from -** the RESERVED_LOCK byte. -** -** On WinNT/2K/XP systems, LockFileEx() and UnlockFileEx() are available, -** which means we can use reader/writer locks. When reader/writer locks -** are used, the lock is placed on the same range of bytes that is used -** for probabilistic locking in Win95/98/ME. Hence, the locking scheme -** will support two or more Win95 readers or two or more WinNT readers. -** But a single Win95 reader will lock out all WinNT readers and a single -** WinNT reader will lock out all other Win95 readers. -** -** The following #defines specify the range of bytes used for locking. -** SHARED_SIZE is the number of bytes available in the pool from which -** a random byte is selected for a shared lock. The pool of bytes for -** shared locks begins at SHARED_FIRST. -** -** The same locking strategy and -** byte ranges are used for Unix. This leaves open the possiblity of having -** clients on win95, winNT, and unix all talking to the same shared file -** and all locking correctly. To do so would require that samba (or whatever -** tool is being used for file sharing) implements locks correctly between -** windows and unix. I'm guessing that isn't likely to happen, but by -** using the same locking range we are at least open to the possibility. -** -** Locking in windows is manditory. For this reason, we cannot store -** actual data in the bytes used for locking. The pager never allocates -** the pages involved in locking therefore. SHARED_SIZE is selected so -** that all locks will fit on a single page even at the minimum page size. -** PENDING_BYTE defines the beginning of the locks. By default PENDING_BYTE -** is set high so that we don't have to allocate an unused page except -** for very large databases. But one should test the page skipping logic -** by setting PENDING_BYTE low and running the entire regression suite. -** -** Changing the value of PENDING_BYTE results in a subtly incompatible -** file format. Depending on how it is changed, you might not notice -** the incompatibility right away, even running a full regression test. -** The default location of PENDING_BYTE is the first byte past the -** 1GB boundary. -** -*/ -#define PENDING_BYTE sqlite3PendingByte -#define RESERVED_BYTE (PENDING_BYTE+1) -#define SHARED_FIRST (PENDING_BYTE+2) -#define SHARED_SIZE 510 - -/* -** Wrapper around OS specific sqlite3_os_init() function. -*/ -SQLITE_PRIVATE int sqlite3OsInit(void); - -/* -** Functions for accessing sqlite3_file methods -*/ -SQLITE_PRIVATE int sqlite3OsClose(sqlite3_file*); -SQLITE_PRIVATE int sqlite3OsRead(sqlite3_file*, void*, int amt, i64 offset); -SQLITE_PRIVATE int sqlite3OsWrite(sqlite3_file*, const void*, int amt, i64 offset); -SQLITE_PRIVATE int sqlite3OsTruncate(sqlite3_file*, i64 size); -SQLITE_PRIVATE int sqlite3OsSync(sqlite3_file*, int); -SQLITE_PRIVATE int sqlite3OsFileSize(sqlite3_file*, i64 *pSize); -SQLITE_PRIVATE int sqlite3OsLock(sqlite3_file*, int); -SQLITE_PRIVATE int sqlite3OsUnlock(sqlite3_file*, int); -SQLITE_PRIVATE int sqlite3OsCheckReservedLock(sqlite3_file *id, int *pResOut); -SQLITE_PRIVATE int sqlite3OsFileControl(sqlite3_file*,int,void*); -#define SQLITE_FCNTL_DB_UNCHANGED 0xca093fa0 -SQLITE_PRIVATE int sqlite3OsSectorSize(sqlite3_file *id); -SQLITE_PRIVATE int sqlite3OsDeviceCharacteristics(sqlite3_file *id); - -/* -** Functions for accessing sqlite3_vfs methods -*/ -SQLITE_PRIVATE int sqlite3OsOpen(sqlite3_vfs *, const char *, sqlite3_file*, int, int *); -SQLITE_PRIVATE int sqlite3OsDelete(sqlite3_vfs *, const char *, int); -SQLITE_PRIVATE int sqlite3OsAccess(sqlite3_vfs *, const char *, int, int *pResOut); -SQLITE_PRIVATE int sqlite3OsFullPathname(sqlite3_vfs *, const char *, int, char *); -#ifndef SQLITE_OMIT_LOAD_EXTENSION -SQLITE_PRIVATE void *sqlite3OsDlOpen(sqlite3_vfs *, const char *); -SQLITE_PRIVATE void sqlite3OsDlError(sqlite3_vfs *, int, char *); -SQLITE_PRIVATE void (*sqlite3OsDlSym(sqlite3_vfs *, void *, const char *))(void); -SQLITE_PRIVATE void sqlite3OsDlClose(sqlite3_vfs *, void *); -#endif /* SQLITE_OMIT_LOAD_EXTENSION */ -SQLITE_PRIVATE int sqlite3OsRandomness(sqlite3_vfs *, int, char *); -SQLITE_PRIVATE int sqlite3OsSleep(sqlite3_vfs *, int); -SQLITE_PRIVATE int sqlite3OsCurrentTime(sqlite3_vfs *, double*); - -/* -** Convenience functions for opening and closing files using -** sqlite3_malloc() to obtain space for the file-handle structure. -*/ -SQLITE_PRIVATE int sqlite3OsOpenMalloc(sqlite3_vfs *, const char *, sqlite3_file **, int,int*); -SQLITE_PRIVATE int sqlite3OsCloseFree(sqlite3_file *); - -#endif /* _SQLITE_OS_H_ */ - -/************** End of os.h **************************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ -/************** Include mutex.h in the middle of sqliteInt.h *****************/ -/************** Begin file mutex.h *******************************************/ -/* -** 2007 August 28 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** -** This file contains the common header for all mutex implementations. -** The sqliteInt.h header #includes this file so that it is available -** to all source files. We break it out in an effort to keep the code -** better organized. -** -** NOTE: source files should *not* #include this header file directly. -** Source files should #include the sqliteInt.h file and let that file -** include this one indirectly. -*/ - - -/* -** Figure out what version of the code to use. The choices are -** -** SQLITE_MUTEX_OMIT No mutex logic. Not even stubs. The -** mutexes implemention cannot be overridden -** at start-time. -** -** SQLITE_MUTEX_NOOP For single-threaded applications. No -** mutual exclusion is provided. But this -** implementation can be overridden at -** start-time. -** -** SQLITE_MUTEX_PTHREADS For multi-threaded applications on Unix. -** -** SQLITE_MUTEX_W32 For multi-threaded applications on Win32. -** -** SQLITE_MUTEX_OS2 For multi-threaded applications on OS/2. -*/ -#if !SQLITE_THREADSAFE -# define SQLITE_MUTEX_OMIT -#endif -#if SQLITE_THREADSAFE && !defined(SQLITE_MUTEX_NOOP) -# if SQLITE_OS_UNIX -# define SQLITE_MUTEX_PTHREADS -# elif SQLITE_OS_WIN -# define SQLITE_MUTEX_W32 -# elif SQLITE_OS_OS2 -# define SQLITE_MUTEX_OS2 -# else -# define SQLITE_MUTEX_NOOP -# endif -#endif - -#ifdef SQLITE_MUTEX_OMIT -/* -** If this is a no-op implementation, implement everything as macros. -*/ -#define sqlite3_mutex_alloc(X) ((sqlite3_mutex*)8) -#define sqlite3_mutex_free(X) -#define sqlite3_mutex_enter(X) -#define sqlite3_mutex_try(X) SQLITE_OK -#define sqlite3_mutex_leave(X) -#define sqlite3_mutex_held(X) 1 -#define sqlite3_mutex_notheld(X) 1 -#define sqlite3MutexAlloc(X) ((sqlite3_mutex*)8) -#define sqlite3MutexInit() SQLITE_OK -#define sqlite3MutexEnd() -#endif /* defined(SQLITE_MUTEX_OMIT) */ - -/************** End of mutex.h ***********************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ - - -/* -** Each database file to be accessed by the system is an instance -** of the following structure. There are normally two of these structures -** in the sqlite.aDb[] array. aDb[0] is the main database file and -** aDb[1] is the database file used to hold temporary tables. Additional -** databases may be attached. -*/ -struct Db { - char *zName; /* Name of this database */ - Btree *pBt; /* The B*Tree structure for this database file */ - u8 inTrans; /* 0: not writable. 1: Transaction. 2: Checkpoint */ - u8 safety_level; /* How aggressive at syncing data to disk */ - Schema *pSchema; /* Pointer to database schema (possibly shared) */ -}; - -/* -** An instance of the following structure stores a database schema. -** -** If there are no virtual tables configured in this schema, the -** Schema.db variable is set to NULL. After the first virtual table -** has been added, it is set to point to the database connection -** used to create the connection. Once a virtual table has been -** added to the Schema structure and the Schema.db variable populated, -** only that database connection may use the Schema to prepare -** statements. -*/ -struct Schema { - int schema_cookie; /* Database schema version number for this file */ - Hash tblHash; /* All tables indexed by name */ - Hash idxHash; /* All (named) indices indexed by name */ - Hash trigHash; /* All triggers indexed by name */ - Hash fkeyHash; /* All foreign keys by referenced table name */ - Table *pSeqTab; /* The sqlite_sequence table used by AUTOINCREMENT */ - u8 file_format; /* Schema format version for this file */ - u8 enc; /* Text encoding used by this database */ - u16 flags; /* Flags associated with this schema */ - int cache_size; /* Number of pages to use in the cache */ -#ifndef SQLITE_OMIT_VIRTUALTABLE - sqlite3 *db; /* "Owner" connection. See comment above */ -#endif -}; - -/* -** These macros can be used to test, set, or clear bits in the -** Db.pSchema->flags field. -*/ -#define DbHasProperty(D,I,P) (((D)->aDb[I].pSchema->flags&(P))==(P)) -#define DbHasAnyProperty(D,I,P) (((D)->aDb[I].pSchema->flags&(P))!=0) -#define DbSetProperty(D,I,P) (D)->aDb[I].pSchema->flags|=(P) -#define DbClearProperty(D,I,P) (D)->aDb[I].pSchema->flags&=~(P) - -/* -** Allowed values for the DB.pSchema->flags field. -** -** The DB_SchemaLoaded flag is set after the database schema has been -** read into internal hash tables. -** -** DB_UnresetViews means that one or more views have column names that -** have been filled out. If the schema changes, these column names might -** changes and so the view will need to be reset. -*/ -#define DB_SchemaLoaded 0x0001 /* The schema has been loaded */ -#define DB_UnresetViews 0x0002 /* Some views have defined column names */ -#define DB_Empty 0x0004 /* The file is empty (length 0 bytes) */ - -/* -** The number of different kinds of things that can be limited -** using the sqlite3_limit() interface. -*/ -#define SQLITE_N_LIMIT (SQLITE_LIMIT_TRIGGER_DEPTH+1) - -/* -** Lookaside malloc is a set of fixed-size buffers that can be used -** to satisfy small transient memory allocation requests for objects -** associated with a particular database connection. The use of -** lookaside malloc provides a significant performance enhancement -** (approx 10%) by avoiding numerous malloc/free requests while parsing -** SQL statements. -** -** The Lookaside structure holds configuration information about the -** lookaside malloc subsystem. Each available memory allocation in -** the lookaside subsystem is stored on a linked list of LookasideSlot -** objects. -** -** Lookaside allocations are only allowed for objects that are associated -** with a particular database connection. Hence, schema information cannot -** be stored in lookaside because in shared cache mode the schema information -** is shared by multiple database connections. Therefore, while parsing -** schema information, the Lookaside.bEnabled flag is cleared so that -** lookaside allocations are not used to construct the schema objects. -*/ -struct Lookaside { - u16 sz; /* Size of each buffer in bytes */ - u8 bEnabled; /* False to disable new lookaside allocations */ - u8 bMalloced; /* True if pStart obtained from sqlite3_malloc() */ - int nOut; /* Number of buffers currently checked out */ - int mxOut; /* Highwater mark for nOut */ - LookasideSlot *pFree; /* List of available buffers */ - void *pStart; /* First byte of available memory space */ - void *pEnd; /* First byte past end of available space */ -}; -struct LookasideSlot { - LookasideSlot *pNext; /* Next buffer in the list of free buffers */ -}; - -/* -** A hash table for function definitions. -** -** Hash each FuncDef structure into one of the FuncDefHash.a[] slots. -** Collisions are on the FuncDef.pHash chain. -*/ -struct FuncDefHash { - FuncDef *a[23]; /* Hash table for functions */ -}; - -/* -** Each database connection is an instance of the following structure. -** -** The sqlite.lastRowid records the last insert rowid generated by an -** insert statement. Inserts on views do not affect its value. Each -** trigger has its own context, so that lastRowid can be updated inside -** triggers as usual. The previous value will be restored once the trigger -** exits. Upon entering a before or instead of trigger, lastRowid is no -** longer (since after version 2.8.12) reset to -1. -** -** The sqlite.nChange does not count changes within triggers and keeps no -** context. It is reset at start of sqlite3_exec. -** The sqlite.lsChange represents the number of changes made by the last -** insert, update, or delete statement. It remains constant throughout the -** length of a statement and is then updated by OP_SetCounts. It keeps a -** context stack just like lastRowid so that the count of changes -** within a trigger is not seen outside the trigger. Changes to views do not -** affect the value of lsChange. -** The sqlite.csChange keeps track of the number of current changes (since -** the last statement) and is used to update sqlite_lsChange. -** -** The member variables sqlite.errCode, sqlite.zErrMsg and sqlite.zErrMsg16 -** store the most recent error code and, if applicable, string. The -** internal function sqlite3Error() is used to set these variables -** consistently. -*/ -struct sqlite3 { - sqlite3_vfs *pVfs; /* OS Interface */ - int nDb; /* Number of backends currently in use */ - Db *aDb; /* All backends */ - int flags; /* Miscellaneous flags. See below */ - int openFlags; /* Flags passed to sqlite3_vfs.xOpen() */ - int errCode; /* Most recent error code (SQLITE_*) */ - int errMask; /* & result codes with this before returning */ - u8 autoCommit; /* The auto-commit flag. */ - u8 temp_store; /* 1: file 2: memory 0: default */ - u8 mallocFailed; /* True if we have seen a malloc failure */ - u8 dfltLockMode; /* Default locking-mode for attached dbs */ - u8 dfltJournalMode; /* Default journal mode for attached dbs */ - signed char nextAutovac; /* Autovac setting after VACUUM if >=0 */ - u8 suppressErr; /* Do not issue error messages if true */ - int nextPagesize; /* Pagesize after VACUUM if >0 */ - int nTable; /* Number of tables in the database */ - CollSeq *pDfltColl; /* The default collating sequence (BINARY) */ - i64 lastRowid; /* ROWID of most recent insert (see above) */ - u32 magic; /* Magic number for detect library misuse */ - int nChange; /* Value returned by sqlite3_changes() */ - int nTotalChange; /* Value returned by sqlite3_total_changes() */ - sqlite3_mutex *mutex; /* Connection mutex */ - int aLimit[SQLITE_N_LIMIT]; /* Limits */ - struct sqlite3InitInfo { /* Information used during initialization */ - int iDb; /* When back is being initialized */ - int newTnum; /* Rootpage of table being initialized */ - u8 busy; /* TRUE if currently initializing */ - u8 orphanTrigger; /* Last statement is orphaned TEMP trigger */ - } init; - int nExtension; /* Number of loaded extensions */ - void **aExtension; /* Array of shared library handles */ - struct Vdbe *pVdbe; /* List of active virtual machines */ - int activeVdbeCnt; /* Number of VDBEs currently executing */ - int writeVdbeCnt; /* Number of active VDBEs that are writing */ - void (*xTrace)(void*,const char*); /* Trace function */ - void *pTraceArg; /* Argument to the trace function */ - void (*xProfile)(void*,const char*,u64); /* Profiling function */ - void *pProfileArg; /* Argument to profile function */ - void *pCommitArg; /* Argument to xCommitCallback() */ - int (*xCommitCallback)(void*); /* Invoked at every commit. */ - void *pRollbackArg; /* Argument to xRollbackCallback() */ - void (*xRollbackCallback)(void*); /* Invoked at every commit. */ - void *pUpdateArg; - void (*xUpdateCallback)(void*,int, const char*,const char*,sqlite_int64); - void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*); - void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*); - void *pCollNeededArg; - sqlite3_value *pErr; /* Most recent error message */ - char *zErrMsg; /* Most recent error message (UTF-8 encoded) */ - char *zErrMsg16; /* Most recent error message (UTF-16 encoded) */ - union { - volatile int isInterrupted; /* True if sqlite3_interrupt has been called */ - double notUsed1; /* Spacer */ - } u1; - Lookaside lookaside; /* Lookaside malloc configuration */ -#ifndef SQLITE_OMIT_AUTHORIZATION - int (*xAuth)(void*,int,const char*,const char*,const char*,const char*); - /* Access authorization function */ - void *pAuthArg; /* 1st argument to the access auth function */ -#endif -#ifndef SQLITE_OMIT_PROGRESS_CALLBACK - int (*xProgress)(void *); /* The progress callback */ - void *pProgressArg; /* Argument to the progress callback */ - int nProgressOps; /* Number of opcodes for progress callback */ -#endif -#ifndef SQLITE_OMIT_VIRTUALTABLE - Hash aModule; /* populated by sqlite3_create_module() */ - Table *pVTab; /* vtab with active Connect/Create method */ - VTable **aVTrans; /* Virtual tables with open transactions */ - int nVTrans; /* Allocated size of aVTrans */ - VTable *pDisconnect; /* Disconnect these in next sqlite3_prepare() */ -#endif - FuncDefHash aFunc; /* Hash table of connection functions */ - Hash aCollSeq; /* All collating sequences */ - BusyHandler busyHandler; /* Busy callback */ - int busyTimeout; /* Busy handler timeout, in msec */ - Db aDbStatic[2]; /* Static space for the 2 default backends */ - Savepoint *pSavepoint; /* List of active savepoints */ - int nSavepoint; /* Number of non-transaction savepoints */ - int nStatement; /* Number of nested statement-transactions */ - u8 isTransactionSavepoint; /* True if the outermost savepoint is a TS */ - i64 nDeferredCons; /* Net deferred constraints this transaction. */ - -#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY - /* The following variables are all protected by the STATIC_MASTER - ** mutex, not by sqlite3.mutex. They are used by code in notify.c. - ** - ** When X.pUnlockConnection==Y, that means that X is waiting for Y to - ** unlock so that it can proceed. - ** - ** When X.pBlockingConnection==Y, that means that something that X tried - ** tried to do recently failed with an SQLITE_LOCKED error due to locks - ** held by Y. - */ - sqlite3 *pBlockingConnection; /* Connection that caused SQLITE_LOCKED */ - sqlite3 *pUnlockConnection; /* Connection to watch for unlock */ - void *pUnlockArg; /* Argument to xUnlockNotify */ - void (*xUnlockNotify)(void **, int); /* Unlock notify callback */ - sqlite3 *pNextBlocked; /* Next in list of all blocked connections */ -#endif -}; - -/* -** A macro to discover the encoding of a database. -*/ -#define ENC(db) ((db)->aDb[0].pSchema->enc) - -/* -** Possible values for the sqlite3.flags. -*/ -#define SQLITE_VdbeTrace 0x00000100 /* True to trace VDBE execution */ -#define SQLITE_InternChanges 0x00000200 /* Uncommitted Hash table changes */ -#define SQLITE_FullColNames 0x00000400 /* Show full column names on SELECT */ -#define SQLITE_ShortColNames 0x00000800 /* Show short columns names */ -#define SQLITE_CountRows 0x00001000 /* Count rows changed by INSERT, */ - /* DELETE, or UPDATE and return */ - /* the count using a callback. */ -#define SQLITE_NullCallback 0x00002000 /* Invoke the callback once if the */ - /* result set is empty */ -#define SQLITE_SqlTrace 0x00004000 /* Debug print SQL as it executes */ -#define SQLITE_VdbeListing 0x00008000 /* Debug listings of VDBE programs */ -#define SQLITE_WriteSchema 0x00010000 /* OK to update SQLITE_MASTER */ -#define SQLITE_NoReadlock 0x00020000 /* Readlocks are omitted when - ** accessing read-only databases */ -#define SQLITE_IgnoreChecks 0x00040000 /* Do not enforce check constraints */ -#define SQLITE_ReadUncommitted 0x0080000 /* For shared-cache mode */ -#define SQLITE_LegacyFileFmt 0x00100000 /* Create new databases in format 1 */ -#define SQLITE_FullFSync 0x00200000 /* Use full fsync on the backend */ -#define SQLITE_LoadExtension 0x00400000 /* Enable load_extension */ -#define SQLITE_RecoveryMode 0x00800000 /* Ignore schema errors */ -#define SQLITE_ReverseOrder 0x01000000 /* Reverse unordered SELECTs */ -#define SQLITE_RecTriggers 0x02000000 /* Enable recursive triggers */ -#define SQLITE_ForeignKeys 0x04000000 /* Enforce foreign key constraints */ - -/* -** Bits of the sqlite3.flags field that are used by the -** sqlite3_test_control(SQLITE_TESTCTRL_OPTIMIZATIONS,...) interface. -** These must be the low-order bits of the flags field. -*/ -#define SQLITE_QueryFlattener 0x01 /* Disable query flattening */ -#define SQLITE_ColumnCache 0x02 /* Disable the column cache */ -#define SQLITE_IndexSort 0x04 /* Disable indexes for sorting */ -#define SQLITE_IndexSearch 0x08 /* Disable indexes for searching */ -#define SQLITE_IndexCover 0x10 /* Disable index covering table */ -#define SQLITE_OptMask 0x1f /* Mask of all disablable opts */ - -/* -** Possible values for the sqlite.magic field. -** The numbers are obtained at random and have no special meaning, other -** than being distinct from one another. -*/ -#define SQLITE_MAGIC_OPEN 0xa029a697 /* Database is open */ -#define SQLITE_MAGIC_CLOSED 0x9f3c2d33 /* Database is closed */ -#define SQLITE_MAGIC_SICK 0x4b771290 /* Error and awaiting close */ -#define SQLITE_MAGIC_BUSY 0xf03b7906 /* Database currently in use */ -#define SQLITE_MAGIC_ERROR 0xb5357930 /* An SQLITE_MISUSE error occurred */ - -/* -** Each SQL function is defined by an instance of the following -** structure. A pointer to this structure is stored in the sqlite.aFunc -** hash table. When multiple functions have the same name, the hash table -** points to a linked list of these structures. -*/ -struct FuncDef { - i16 nArg; /* Number of arguments. -1 means unlimited */ - u8 iPrefEnc; /* Preferred text encoding (SQLITE_UTF8, 16LE, 16BE) */ - u8 flags; /* Some combination of SQLITE_FUNC_* */ - void *pUserData; /* User data parameter */ - FuncDef *pNext; /* Next function with same name */ - void (*xFunc)(sqlite3_context*,int,sqlite3_value**); /* Regular function */ - void (*xStep)(sqlite3_context*,int,sqlite3_value**); /* Aggregate step */ - void (*xFinalize)(sqlite3_context*); /* Aggregate finalizer */ - char *zName; /* SQL name of the function. */ - FuncDef *pHash; /* Next with a different name but the same hash */ -}; - -/* -** Possible values for FuncDef.flags -*/ -#define SQLITE_FUNC_LIKE 0x01 /* Candidate for the LIKE optimization */ -#define SQLITE_FUNC_CASE 0x02 /* Case-sensitive LIKE-type function */ -#define SQLITE_FUNC_EPHEM 0x04 /* Ephemeral. Delete with VDBE */ -#define SQLITE_FUNC_NEEDCOLL 0x08 /* sqlite3GetFuncCollSeq() might be called */ -#define SQLITE_FUNC_PRIVATE 0x10 /* Allowed for internal use only */ -#define SQLITE_FUNC_COUNT 0x20 /* Built-in count(*) aggregate */ -#define SQLITE_FUNC_COALESCE 0x40 /* Built-in coalesce() or ifnull() function */ - -/* -** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are -** used to create the initializers for the FuncDef structures. -** -** FUNCTION(zName, nArg, iArg, bNC, xFunc) -** Used to create a scalar function definition of a function zName -** implemented by C function xFunc that accepts nArg arguments. The -** value passed as iArg is cast to a (void*) and made available -** as the user-data (sqlite3_user_data()) for the function. If -** argument bNC is true, then the SQLITE_FUNC_NEEDCOLL flag is set. -** -** AGGREGATE(zName, nArg, iArg, bNC, xStep, xFinal) -** Used to create an aggregate function definition implemented by -** the C functions xStep and xFinal. The first four parameters -** are interpreted in the same way as the first 4 parameters to -** FUNCTION(). -** -** LIKEFUNC(zName, nArg, pArg, flags) -** Used to create a scalar function definition of a function zName -** that accepts nArg arguments and is implemented by a call to C -** function likeFunc. Argument pArg is cast to a (void *) and made -** available as the function user-data (sqlite3_user_data()). The -** FuncDef.flags variable is set to the value passed as the flags -** parameter. -*/ -#define FUNCTION(zName, nArg, iArg, bNC, xFunc) \ - {nArg, SQLITE_UTF8, bNC*SQLITE_FUNC_NEEDCOLL, \ - SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0} -#define STR_FUNCTION(zName, nArg, pArg, bNC, xFunc) \ - {nArg, SQLITE_UTF8, bNC*SQLITE_FUNC_NEEDCOLL, \ - pArg, 0, xFunc, 0, 0, #zName, 0} -#define LIKEFUNC(zName, nArg, arg, flags) \ - {nArg, SQLITE_UTF8, flags, (void *)arg, 0, likeFunc, 0, 0, #zName, 0} -#define AGGREGATE(zName, nArg, arg, nc, xStep, xFinal) \ - {nArg, SQLITE_UTF8, nc*SQLITE_FUNC_NEEDCOLL, \ - SQLITE_INT_TO_PTR(arg), 0, 0, xStep,xFinal,#zName,0} - -/* -** All current savepoints are stored in a linked list starting at -** sqlite3.pSavepoint. The first element in the list is the most recently -** opened savepoint. Savepoints are added to the list by the vdbe -** OP_Savepoint instruction. -*/ -struct Savepoint { - char *zName; /* Savepoint name (nul-terminated) */ - i64 nDeferredCons; /* Number of deferred fk violations */ - Savepoint *pNext; /* Parent savepoint (if any) */ -}; - -/* -** The following are used as the second parameter to sqlite3Savepoint(), -** and as the P1 argument to the OP_Savepoint instruction. -*/ -#define SAVEPOINT_BEGIN 0 -#define SAVEPOINT_RELEASE 1 -#define SAVEPOINT_ROLLBACK 2 - - -/* -** Each SQLite module (virtual table definition) is defined by an -** instance of the following structure, stored in the sqlite3.aModule -** hash table. -*/ -struct Module { - const sqlite3_module *pModule; /* Callback pointers */ - const char *zName; /* Name passed to create_module() */ - void *pAux; /* pAux passed to create_module() */ - void (*xDestroy)(void *); /* Module destructor function */ -}; - -/* -** information about each column of an SQL table is held in an instance -** of this structure. -*/ -struct Column { - char *zName; /* Name of this column */ - Expr *pDflt; /* Default value of this column */ - char *zDflt; /* Original text of the default value */ - char *zType; /* Data type for this column */ - char *zColl; /* Collating sequence. If NULL, use the default */ - u8 notNull; /* True if there is a NOT NULL constraint */ - u8 isPrimKey; /* True if this column is part of the PRIMARY KEY */ - char affinity; /* One of the SQLITE_AFF_... values */ -#ifndef SQLITE_OMIT_VIRTUALTABLE - u8 isHidden; /* True if this column is 'hidden' */ -#endif -}; - -/* -** A "Collating Sequence" is defined by an instance of the following -** structure. Conceptually, a collating sequence consists of a name and -** a comparison routine that defines the order of that sequence. -** -** There may two separate implementations of the collation function, one -** that processes text in UTF-8 encoding (CollSeq.xCmp) and another that -** processes text encoded in UTF-16 (CollSeq.xCmp16), using the machine -** native byte order. When a collation sequence is invoked, SQLite selects -** the version that will require the least expensive encoding -** translations, if any. -** -** The CollSeq.pUser member variable is an extra parameter that passed in -** as the first argument to the UTF-8 comparison function, xCmp. -** CollSeq.pUser16 is the equivalent for the UTF-16 comparison function, -** xCmp16. -** -** If both CollSeq.xCmp and CollSeq.xCmp16 are NULL, it means that the -** collating sequence is undefined. Indices built on an undefined -** collating sequence may not be read or written. -*/ -struct CollSeq { - char *zName; /* Name of the collating sequence, UTF-8 encoded */ - u8 enc; /* Text encoding handled by xCmp() */ - u8 type; /* One of the SQLITE_COLL_... values below */ - void *pUser; /* First argument to xCmp() */ - int (*xCmp)(void*,int, const void*, int, const void*); - void (*xDel)(void*); /* Destructor for pUser */ -}; - -/* -** Allowed values of CollSeq.type: -*/ -#define SQLITE_COLL_BINARY 1 /* The default memcmp() collating sequence */ -#define SQLITE_COLL_NOCASE 2 /* The built-in NOCASE collating sequence */ -#define SQLITE_COLL_REVERSE 3 /* The built-in REVERSE collating sequence */ -#define SQLITE_COLL_USER 0 /* Any other user-defined collating sequence */ - -/* -** A sort order can be either ASC or DESC. -*/ -#define SQLITE_SO_ASC 0 /* Sort in ascending order */ -#define SQLITE_SO_DESC 1 /* Sort in ascending order */ - -/* -** Column affinity types. -** -** These used to have mnemonic name like 'i' for SQLITE_AFF_INTEGER and -** 't' for SQLITE_AFF_TEXT. But we can save a little space and improve -** the speed a little by numbering the values consecutively. -** -** But rather than start with 0 or 1, we begin with 'a'. That way, -** when multiple affinity types are concatenated into a string and -** used as the P4 operand, they will be more readable. -** -** Note also that the numeric types are grouped together so that testing -** for a numeric type is a single comparison. -*/ -#define SQLITE_AFF_TEXT 'a' -#define SQLITE_AFF_NONE 'b' -#define SQLITE_AFF_NUMERIC 'c' -#define SQLITE_AFF_INTEGER 'd' -#define SQLITE_AFF_REAL 'e' - -#define sqlite3IsNumericAffinity(X) ((X)>=SQLITE_AFF_NUMERIC) - -/* -** The SQLITE_AFF_MASK values masks off the significant bits of an -** affinity value. -*/ -#define SQLITE_AFF_MASK 0x67 - -/* -** Additional bit values that can be ORed with an affinity without -** changing the affinity. -*/ -#define SQLITE_JUMPIFNULL 0x08 /* jumps if either operand is NULL */ -#define SQLITE_STOREP2 0x10 /* Store result in reg[P2] rather than jump */ -#define SQLITE_NULLEQ 0x80 /* NULL=NULL */ - -/* -** An object of this type is created for each virtual table present in -** the database schema. -** -** If the database schema is shared, then there is one instance of this -** structure for each database connection (sqlite3*) that uses the shared -** schema. This is because each database connection requires its own unique -** instance of the sqlite3_vtab* handle used to access the virtual table -** implementation. sqlite3_vtab* handles can not be shared between -** database connections, even when the rest of the in-memory database -** schema is shared, as the implementation often stores the database -** connection handle passed to it via the xConnect() or xCreate() method -** during initialization internally. This database connection handle may -** then used by the virtual table implementation to access real tables -** within the database. So that they appear as part of the callers -** transaction, these accesses need to be made via the same database -** connection as that used to execute SQL operations on the virtual table. -** -** All VTable objects that correspond to a single table in a shared -** database schema are initially stored in a linked-list pointed to by -** the Table.pVTable member variable of the corresponding Table object. -** When an sqlite3_prepare() operation is required to access the virtual -** table, it searches the list for the VTable that corresponds to the -** database connection doing the preparing so as to use the correct -** sqlite3_vtab* handle in the compiled query. -** -** When an in-memory Table object is deleted (for example when the -** schema is being reloaded for some reason), the VTable objects are not -** deleted and the sqlite3_vtab* handles are not xDisconnect()ed -** immediately. Instead, they are moved from the Table.pVTable list to -** another linked list headed by the sqlite3.pDisconnect member of the -** corresponding sqlite3 structure. They are then deleted/xDisconnected -** next time a statement is prepared using said sqlite3*. This is done -** to avoid deadlock issues involving multiple sqlite3.mutex mutexes. -** Refer to comments above function sqlite3VtabUnlockList() for an -** explanation as to why it is safe to add an entry to an sqlite3.pDisconnect -** list without holding the corresponding sqlite3.mutex mutex. -** -** The memory for objects of this type is always allocated by -** sqlite3DbMalloc(), using the connection handle stored in VTable.db as -** the first argument. -*/ -struct VTable { - sqlite3 *db; /* Database connection associated with this table */ - Module *pMod; /* Pointer to module implementation */ - sqlite3_vtab *pVtab; /* Pointer to vtab instance */ - int nRef; /* Number of pointers to this structure */ - VTable *pNext; /* Next in linked list (see above) */ -}; - -/* -** Each SQL table is represented in memory by an instance of the -** following structure. -** -** Table.zName is the name of the table. The case of the original -** CREATE TABLE statement is stored, but case is not significant for -** comparisons. -** -** Table.nCol is the number of columns in this table. Table.aCol is a -** pointer to an array of Column structures, one for each column. -** -** If the table has an INTEGER PRIMARY KEY, then Table.iPKey is the index of -** the column that is that key. Otherwise Table.iPKey is negative. Note -** that the datatype of the PRIMARY KEY must be INTEGER for this field to -** be set. An INTEGER PRIMARY KEY is used as the rowid for each row of -** the table. If a table has no INTEGER PRIMARY KEY, then a random rowid -** is generated for each row of the table. TF_HasPrimaryKey is set if -** the table has any PRIMARY KEY, INTEGER or otherwise. -** -** Table.tnum is the page number for the root BTree page of the table in the -** database file. If Table.iDb is the index of the database table backend -** in sqlite.aDb[]. 0 is for the main database and 1 is for the file that -** holds temporary tables and indices. If TF_Ephemeral is set -** then the table is stored in a file that is automatically deleted -** when the VDBE cursor to the table is closed. In this case Table.tnum -** refers VDBE cursor number that holds the table open, not to the root -** page number. Transient tables are used to hold the results of a -** sub-query that appears instead of a real table name in the FROM clause -** of a SELECT statement. -*/ -struct Table { - sqlite3 *dbMem; /* DB connection used for lookaside allocations. */ - char *zName; /* Name of the table or view */ - int iPKey; /* If not negative, use aCol[iPKey] as the primary key */ - int nCol; /* Number of columns in this table */ - Column *aCol; /* Information about each column */ - Index *pIndex; /* List of SQL indexes on this table. */ - int tnum; /* Root BTree node for this table (see note above) */ - Select *pSelect; /* NULL for tables. Points to definition if a view. */ - u16 nRef; /* Number of pointers to this Table */ - u8 tabFlags; /* Mask of TF_* values */ - u8 keyConf; /* What to do in case of uniqueness conflict on iPKey */ - FKey *pFKey; /* Linked list of all foreign keys in this table */ - char *zColAff; /* String defining the affinity of each column */ -#ifndef SQLITE_OMIT_CHECK - Expr *pCheck; /* The AND of all CHECK constraints */ -#endif -#ifndef SQLITE_OMIT_ALTERTABLE - int addColOffset; /* Offset in CREATE TABLE stmt to add a new column */ -#endif -#ifndef SQLITE_OMIT_VIRTUALTABLE - VTable *pVTable; /* List of VTable objects. */ - int nModuleArg; /* Number of arguments to the module */ - char **azModuleArg; /* Text of all module args. [0] is module name */ -#endif - Trigger *pTrigger; /* List of triggers stored in pSchema */ - Schema *pSchema; /* Schema that contains this table */ - Table *pNextZombie; /* Next on the Parse.pZombieTab list */ -}; - -/* -** Allowed values for Tabe.tabFlags. -*/ -#define TF_Readonly 0x01 /* Read-only system table */ -#define TF_Ephemeral 0x02 /* An ephemeral table */ -#define TF_HasPrimaryKey 0x04 /* Table has a primary key */ -#define TF_Autoincrement 0x08 /* Integer primary key is autoincrement */ -#define TF_Virtual 0x10 /* Is a virtual table */ -#define TF_NeedMetadata 0x20 /* aCol[].zType and aCol[].pColl missing */ - - - -/* -** Test to see whether or not a table is a virtual table. This is -** done as a macro so that it will be optimized out when virtual -** table support is omitted from the build. -*/ -#ifndef SQLITE_OMIT_VIRTUALTABLE -# define IsVirtual(X) (((X)->tabFlags & TF_Virtual)!=0) -# define IsHiddenColumn(X) ((X)->isHidden) -#else -# define IsVirtual(X) 0 -# define IsHiddenColumn(X) 0 -#endif - -/* -** Each foreign key constraint is an instance of the following structure. -** -** A foreign key is associated with two tables. The "from" table is -** the table that contains the REFERENCES clause that creates the foreign -** key. The "to" table is the table that is named in the REFERENCES clause. -** Consider this example: -** -** CREATE TABLE ex1( -** a INTEGER PRIMARY KEY, -** b INTEGER CONSTRAINT fk1 REFERENCES ex2(x) -** ); -** -** For foreign key "fk1", the from-table is "ex1" and the to-table is "ex2". -** -** Each REFERENCES clause generates an instance of the following structure -** which is attached to the from-table. The to-table need not exist when -** the from-table is created. The existence of the to-table is not checked. -*/ -struct FKey { - Table *pFrom; /* Table containing the REFERENCES clause (aka: Child) */ - FKey *pNextFrom; /* Next foreign key in pFrom */ - char *zTo; /* Name of table that the key points to (aka: Parent) */ - FKey *pNextTo; /* Next foreign key on table named zTo */ - FKey *pPrevTo; /* Previous foreign key on table named zTo */ - int nCol; /* Number of columns in this key */ - /* EV: R-30323-21917 */ - u8 isDeferred; /* True if constraint checking is deferred till COMMIT */ - u8 aAction[2]; /* ON DELETE and ON UPDATE actions, respectively */ - Trigger *apTrigger[2]; /* Triggers for aAction[] actions */ - struct sColMap { /* Mapping of columns in pFrom to columns in zTo */ - int iFrom; /* Index of column in pFrom */ - char *zCol; /* Name of column in zTo. If 0 use PRIMARY KEY */ - } aCol[1]; /* One entry for each of nCol column s */ -}; - -/* -** SQLite supports many different ways to resolve a constraint -** error. ROLLBACK processing means that a constraint violation -** causes the operation in process to fail and for the current transaction -** to be rolled back. ABORT processing means the operation in process -** fails and any prior changes from that one operation are backed out, -** but the transaction is not rolled back. FAIL processing means that -** the operation in progress stops and returns an error code. But prior -** changes due to the same operation are not backed out and no rollback -** occurs. IGNORE means that the particular row that caused the constraint -** error is not inserted or updated. Processing continues and no error -** is returned. REPLACE means that preexisting database rows that caused -** a UNIQUE constraint violation are removed so that the new insert or -** update can proceed. Processing continues and no error is reported. -** -** RESTRICT, SETNULL, and CASCADE actions apply only to foreign keys. -** RESTRICT is the same as ABORT for IMMEDIATE foreign keys and the -** same as ROLLBACK for DEFERRED keys. SETNULL means that the foreign -** key is set to NULL. CASCADE means that a DELETE or UPDATE of the -** referenced table row is propagated into the row that holds the -** foreign key. -** -** The following symbolic values are used to record which type -** of action to take. -*/ -#define OE_None 0 /* There is no constraint to check */ -#define OE_Rollback 1 /* Fail the operation and rollback the transaction */ -#define OE_Abort 2 /* Back out changes but do no rollback transaction */ -#define OE_Fail 3 /* Stop the operation but leave all prior changes */ -#define OE_Ignore 4 /* Ignore the error. Do not do the INSERT or UPDATE */ -#define OE_Replace 5 /* Delete existing record, then do INSERT or UPDATE */ - -#define OE_Restrict 6 /* OE_Abort for IMMEDIATE, OE_Rollback for DEFERRED */ -#define OE_SetNull 7 /* Set the foreign key value to NULL */ -#define OE_SetDflt 8 /* Set the foreign key value to its default */ -#define OE_Cascade 9 /* Cascade the changes */ - -#define OE_Default 99 /* Do whatever the default action is */ - - -/* -** An instance of the following structure is passed as the first -** argument to sqlite3VdbeKeyCompare and is used to control the -** comparison of the two index keys. -*/ -struct KeyInfo { - sqlite3 *db; /* The database connection */ - u8 enc; /* Text encoding - one of the TEXT_Utf* values */ - u16 nField; /* Number of entries in aColl[] */ - u8 *aSortOrder; /* If defined an aSortOrder[i] is true, sort DESC */ - CollSeq *aColl[1]; /* Collating sequence for each term of the key */ -}; - -/* -** An instance of the following structure holds information about a -** single index record that has already been parsed out into individual -** values. -** -** A record is an object that contains one or more fields of data. -** Records are used to store the content of a table row and to store -** the key of an index. A blob encoding of a record is created by -** the OP_MakeRecord opcode of the VDBE and is disassembled by the -** OP_Column opcode. -** -** This structure holds a record that has already been disassembled -** into its constituent fields. -*/ -struct UnpackedRecord { - KeyInfo *pKeyInfo; /* Collation and sort-order information */ - u16 nField; /* Number of entries in apMem[] */ - u16 flags; /* Boolean settings. UNPACKED_... below */ - i64 rowid; /* Used by UNPACKED_PREFIX_SEARCH */ - Mem *aMem; /* Values */ -}; - -/* -** Allowed values of UnpackedRecord.flags -*/ -#define UNPACKED_NEED_FREE 0x0001 /* Memory is from sqlite3Malloc() */ -#define UNPACKED_NEED_DESTROY 0x0002 /* apMem[]s should all be destroyed */ -#define UNPACKED_IGNORE_ROWID 0x0004 /* Ignore trailing rowid on key1 */ -#define UNPACKED_INCRKEY 0x0008 /* Make this key an epsilon larger */ -#define UNPACKED_PREFIX_MATCH 0x0010 /* A prefix match is considered OK */ -#define UNPACKED_PREFIX_SEARCH 0x0020 /* A prefix match is considered OK */ - -/* -** Each SQL index is represented in memory by an -** instance of the following structure. -** -** The columns of the table that are to be indexed are described -** by the aiColumn[] field of this structure. For example, suppose -** we have the following table and index: -** -** CREATE TABLE Ex1(c1 int, c2 int, c3 text); -** CREATE INDEX Ex2 ON Ex1(c3,c1); -** -** In the Table structure describing Ex1, nCol==3 because there are -** three columns in the table. In the Index structure describing -** Ex2, nColumn==2 since 2 of the 3 columns of Ex1 are indexed. -** The value of aiColumn is {2, 0}. aiColumn[0]==2 because the -** first column to be indexed (c3) has an index of 2 in Ex1.aCol[]. -** The second column to be indexed (c1) has an index of 0 in -** Ex1.aCol[], hence Ex2.aiColumn[1]==0. -** -** The Index.onError field determines whether or not the indexed columns -** must be unique and what to do if they are not. When Index.onError=OE_None, -** it means this is not a unique index. Otherwise it is a unique index -** and the value of Index.onError indicate the which conflict resolution -** algorithm to employ whenever an attempt is made to insert a non-unique -** element. -*/ -struct Index { - char *zName; /* Name of this index */ - int nColumn; /* Number of columns in the table used by this index */ - int *aiColumn; /* Which columns are used by this index. 1st is 0 */ - unsigned *aiRowEst; /* Result of ANALYZE: Est. rows selected by each column */ - Table *pTable; /* The SQL table being indexed */ - int tnum; /* Page containing root of this index in database file */ - u8 onError; /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */ - u8 autoIndex; /* True if is automatically created (ex: by UNIQUE) */ - char *zColAff; /* String defining the affinity of each column */ - Index *pNext; /* The next index associated with the same table */ - Schema *pSchema; /* Schema containing this index */ - u8 *aSortOrder; /* Array of size Index.nColumn. True==DESC, False==ASC */ - char **azColl; /* Array of collation sequence names for index */ - IndexSample *aSample; /* Array of SQLITE_INDEX_SAMPLES samples */ -}; - -/* -** Each sample stored in the sqlite_stat2 table is represented in memory -** using a structure of this type. -*/ -struct IndexSample { - union { - char *z; /* Value if eType is SQLITE_TEXT or SQLITE_BLOB */ - double r; /* Value if eType is SQLITE_FLOAT or SQLITE_INTEGER */ - } u; - u8 eType; /* SQLITE_NULL, SQLITE_INTEGER ... etc. */ - u8 nByte; /* Size in byte of text or blob. */ -}; - -/* -** Each token coming out of the lexer is an instance of -** this structure. Tokens are also used as part of an expression. -** -** Note if Token.z==0 then Token.dyn and Token.n are undefined and -** may contain random values. Do not make any assumptions about Token.dyn -** and Token.n when Token.z==0. -*/ -struct Token { - const char *z; /* Text of the token. Not NULL-terminated! */ - unsigned int n; /* Number of characters in this token */ -}; - -/* -** An instance of this structure contains information needed to generate -** code for a SELECT that contains aggregate functions. -** -** If Expr.op==TK_AGG_COLUMN or TK_AGG_FUNCTION then Expr.pAggInfo is a -** pointer to this structure. The Expr.iColumn field is the index in -** AggInfo.aCol[] or AggInfo.aFunc[] of information needed to generate -** code for that node. -** -** AggInfo.pGroupBy and AggInfo.aFunc.pExpr point to fields within the -** original Select structure that describes the SELECT statement. These -** fields do not need to be freed when deallocating the AggInfo structure. -*/ -struct AggInfo { - u8 directMode; /* Direct rendering mode means take data directly - ** from source tables rather than from accumulators */ - u8 useSortingIdx; /* In direct mode, reference the sorting index rather - ** than the source table */ - int sortingIdx; /* Cursor number of the sorting index */ - ExprList *pGroupBy; /* The group by clause */ - int nSortingColumn; /* Number of columns in the sorting index */ - struct AggInfo_col { /* For each column used in source tables */ - Table *pTab; /* Source table */ - int iTable; /* Cursor number of the source table */ - int iColumn; /* Column number within the source table */ - int iSorterColumn; /* Column number in the sorting index */ - int iMem; /* Memory location that acts as accumulator */ - Expr *pExpr; /* The original expression */ - } *aCol; - int nColumn; /* Number of used entries in aCol[] */ - int nColumnAlloc; /* Number of slots allocated for aCol[] */ - int nAccumulator; /* Number of columns that show through to the output. - ** Additional columns are used only as parameters to - ** aggregate functions */ - struct AggInfo_func { /* For each aggregate function */ - Expr *pExpr; /* Expression encoding the function */ - FuncDef *pFunc; /* The aggregate function implementation */ - int iMem; /* Memory location that acts as accumulator */ - int iDistinct; /* Ephemeral table used to enforce DISTINCT */ - } *aFunc; - int nFunc; /* Number of entries in aFunc[] */ - int nFuncAlloc; /* Number of slots allocated for aFunc[] */ -}; - -/* -** The datatype ynVar is a signed integer, either 16-bit or 32-bit. -** Usually it is 16-bits. But if SQLITE_MAX_VARIABLE_NUMBER is greater -** than 32767 we have to make it 32-bit. 16-bit is preferred because -** it uses less memory in the Expr object, which is a big memory user -** in systems with lots of prepared statements. And few applications -** need more than about 10 or 20 variables. But some extreme users want -** to have prepared statements with over 32767 variables, and for them -** the option is available (at compile-time). -*/ -#if SQLITE_MAX_VARIABLE_NUMBER<=32767 -typedef i16 ynVar; -#else -typedef int ynVar; -#endif - -/* -** Each node of an expression in the parse tree is an instance -** of this structure. -** -** Expr.op is the opcode. The integer parser token codes are reused -** as opcodes here. For example, the parser defines TK_GE to be an integer -** code representing the ">=" operator. This same integer code is reused -** to represent the greater-than-or-equal-to operator in the expression -** tree. -** -** If the expression is an SQL literal (TK_INTEGER, TK_FLOAT, TK_BLOB, -** or TK_STRING), then Expr.token contains the text of the SQL literal. If -** the expression is a variable (TK_VARIABLE), then Expr.token contains the -** variable name. Finally, if the expression is an SQL function (TK_FUNCTION), -** then Expr.token contains the name of the function. -** -** Expr.pRight and Expr.pLeft are the left and right subexpressions of a -** binary operator. Either or both may be NULL. -** -** Expr.x.pList is a list of arguments if the expression is an SQL function, -** a CASE expression or an IN expression of the form " IN (, ...)". -** Expr.x.pSelect is used if the expression is a sub-select or an expression of -** the form " IN (SELECT ...)". If the EP_xIsSelect bit is set in the -** Expr.flags mask, then Expr.x.pSelect is valid. Otherwise, Expr.x.pList is -** valid. -** -** An expression of the form ID or ID.ID refers to a column in a table. -** For such expressions, Expr.op is set to TK_COLUMN and Expr.iTable is -** the integer cursor number of a VDBE cursor pointing to that table and -** Expr.iColumn is the column number for the specific column. If the -** expression is used as a result in an aggregate SELECT, then the -** value is also stored in the Expr.iAgg column in the aggregate so that -** it can be accessed after all aggregates are computed. -** -** If the expression is an unbound variable marker (a question mark -** character '?' in the original SQL) then the Expr.iTable holds the index -** number for that variable. -** -** If the expression is a subquery then Expr.iColumn holds an integer -** register number containing the result of the subquery. If the -** subquery gives a constant result, then iTable is -1. If the subquery -** gives a different answer at different times during statement processing -** then iTable is the address of a subroutine that computes the subquery. -** -** If the Expr is of type OP_Column, and the table it is selecting from -** is a disk table or the "old.*" pseudo-table, then pTab points to the -** corresponding table definition. -** -** ALLOCATION NOTES: -** -** Expr objects can use a lot of memory space in database schema. To -** help reduce memory requirements, sometimes an Expr object will be -** truncated. And to reduce the number of memory allocations, sometimes -** two or more Expr objects will be stored in a single memory allocation, -** together with Expr.zToken strings. -** -** If the EP_Reduced and EP_TokenOnly flags are set when -** an Expr object is truncated. When EP_Reduced is set, then all -** the child Expr objects in the Expr.pLeft and Expr.pRight subtrees -** are contained within the same memory allocation. Note, however, that -** the subtrees in Expr.x.pList or Expr.x.pSelect are always separately -** allocated, regardless of whether or not EP_Reduced is set. -*/ -struct Expr { - u8 op; /* Operation performed by this node */ - char affinity; /* The affinity of the column or 0 if not a column */ - u16 flags; /* Various flags. EP_* See below */ - union { - char *zToken; /* Token value. Zero terminated and dequoted */ - int iValue; /* Integer value if EP_IntValue */ - } u; - - /* If the EP_TokenOnly flag is set in the Expr.flags mask, then no - ** space is allocated for the fields below this point. An attempt to - ** access them will result in a segfault or malfunction. - *********************************************************************/ - - Expr *pLeft; /* Left subnode */ - Expr *pRight; /* Right subnode */ - union { - ExprList *pList; /* Function arguments or in " IN ( IN (